Age | Commit message (Collapse) | Author | Files | Lines |
|
When pairing DP IN and DP OUT adapters for DisplayPort tunneling, we
should prioritize the possible external GPU DP IN adapters to take
advantage of the its capabilities. However the commit in question did
this for host router DP IN adapters too and that changes ordering of the
initial DP IN resources in such way that resuming from suspend may end
up using different resource and that may confuse the user.
Fix this so that we only put DP IN adapters of device routers to the top
of the resource list and leave host routers as is.
Fixes: 274baf695b08 ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We should send uevent to userspace whenever the link speed or width
changes but tb_switch_asym_enable() and tb_switch_asym_disable() set the
sw->link_width already so tb_switch_update_link_attributes() never
noticed the change.
Fix this so that we let tb_switch_update_link_attributes() update the
fields accordingly.
Fixes: 81af2952e606 ("thunderbolt: Add support for asymmetric link")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix the lane bonding procedure to follow the steps described in USB4
Connection Manager guide. Hence, set the lane bonding bit only for
downstream port. This is needed for certain ASMedia device, otherwise
lane bonding fails and the device disconnects.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.7 merge window
This includes following USB4/Thunderbolt changes for the v6.7 merge
window:
- Configure asymmetric link if the DisplayPort bandwidth requires so
- Enable path power management packet support for USB4 v2 routers
- Make the bandwidth reservations to follow the USB4 v2 connection
manager guide suggestions
- DisplayPort tunneling improvements
- Small cleanups and improvements around the driver.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (25 commits)
thunderbolt: Fix one kernel-doc comment
thunderbolt: Configure asymmetric link if needed and bandwidth allows
thunderbolt: Add support for asymmetric link
thunderbolt: Introduce tb_switch_depth()
thunderbolt: Introduce tb_for_each_upstream_port_on_path()
thunderbolt: Introduce tb_port_path_direction_downstream()
thunderbolt: Set path power management packet support bit for USB4 v2 routers
thunderbolt: Change bandwidth reservations to comply USB4 v2
thunderbolt: Make is_gen4_link() available to the rest of the driver
thunderbolt: Use weight constants in tb_usb3_consumed_bandwidth()
thunderbolt: Use constants for path weight and priority
thunderbolt: Add DP IN added last in the head of the list of DP resources
thunderbolt: Create multiple DisplayPort tunnels if there are more DP IN/OUT pairs
thunderbolt: Log NVM version of routers and retimers
thunderbolt: Use tb_tunnel_xxx() log macros in tb.c
thunderbolt: Expose tb_tunnel_xxx() log macros to the rest of the driver
thunderbolt: Use tb_tunnel_dbg() where possible to make logging more consistent
thunderbolt: Fix typo of HPD bit for Hot Plug Detect
thunderbolt: Fix typo in enum tb_link_width kernel-doc
thunderbolt: Fix debug log when DisplayPort adapter not available for pairing
...
|
|
Fix a spelling errors in kernel doc comment, silence the warning:
drivers/thunderbolt/tb.c:760: warning: expecting prototype for tb_maximum_banwidth(). Prototype was for tb_maximum_bandwidth() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7048
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 spec defines a Gen 4 link that can operate as an asymmetric
120/40G. When the link is asymmetric, the USB4 port on one side of the
link operates with three TX lanes and one RX lane, while the USB4 port
on the opposite side of the link operates with three RX lanes and one TX
lane. Using asymmetric link we can get much more bandwidth from one
direction and that allows us to support the new Ultra High Bit Rate
DisplayPort modes (that consume up to 77.37 Gb/s).
Add the basic logic for changing Gen 4 links to asymmetric and back
following the below rules:
1) The default threshold is 45 Gb/s (tunable by asym_threshold)
2) When DisplayPort tunnel is established, or when there is bandwidth
request through bandwidth allocation mode, the links can be
transitioned to asymmetric or symmetric (depending on the
required bandwidth).
3) Only DisplayPort bandwidth on a link, is taken into account when
deciding whether a link is transitioned to asymmetric or symmetric
4) If bandwidth on a link is >= asym_threshold transition the link to
asymmetric
5) If bandwidth on a link < asym_threshold transition the link to
symmetric (unless the bandwidth request is above currently
allocated on a tunnel).
6) If a USB4 v2 device router with symmetric link is connected,
transition all the links above it to symmetric if the bandwidth
allows.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 spec defines a Gen 4 link that can operate as an aggregated
symmetric (80/80G) or asymmetric (120/40G). When the link is asymmetric,
the USB4 port on one side of the link operates with three TX lanes and
one RX lane, while the USB4 port on the opposite side of the link
operates with three RX lanes and one TX lane.
Add support for the asymmetric link and provide functions that can be
used to transition the link to asymmetric and back.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is useful helper to find out the depth of a connected router.
Convert the existing users to call this helper instead of open-coding.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is useful when walking over upstream lane adapters over given path.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Introduce tb_port_path_direction_downstream() to check if path from
source adapter to destination adapter is directed towards downstream.
Convert existing users to call this helper instead of open-coding.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 spec allows USB4 links that are part of a pass through tunnel
(such as DisplayPort and USB 3.x Gen T) to enter lower CL states, which
provide better power management. For this USB4 v2 routers in their path
config space of lane 0 adapter include a new bit PMPS (PM packet
support) that needs to be set.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 Connection Manager guide (section 6.1.2.3) suggests to reserve
bandwidth in a sligthly different manner. It suggests to keep minimum of
1500 Mb/s for each path that carry a bulk traffic. Here we change the
bandwidth reservations to comply to the above for USB 3.x and PCIe
protocols over Gen 4 link, taking weights into account (that's 1500 Mb/s
for PCIe and 3000 Mb/s for USB 3.x).
For Gen 3 and below we use the existing reservation.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Rework the function to return the link generation, update the name to
tb_port_get_link_generation(), and make available to the rest of the
driver. This is needed in the subsequent patches.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Instead of magic numbers use the constants we introduced in the previous
commit to make the code more readable. No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Makes it easier to follow and update. No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v6.6-rc7
This includes a single commit that fixes a memory leak when DisplayPort
bandwidth allocation request is being handled by the driver.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finished
|
|
If DP IN on device router exist, position it at the beginning of the DP
resources list, so that it is used before DP IN on host router. This way
external GPU will be prioritized when pairing DP IN and DP OUT for
DisplayPort tunnel setup.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
pairs
Currently we only create one DisplayPort tunnel even if there would be
more DP IN/OUT pairs available. Specifically this happens when a router
is unplugged and we check if a new DisplayPort tunnel can be created. To
cover this create tunnels as long as we find suitable DP IN/OUT pairs.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is useful when debugging possible issues.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Now that the macros are available we can use them in tb.c. This makes
the log output more consistent.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In order to allow more consistent logging of tunnel related information
make these logging macros available to the rest of the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This makes it easier to find out the tunnel in question. Also drop a
couple of lines that generate duplicate information.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typo of HPD bit stands for Hot Plug Detect.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix debug log when looking for a DisplayPort adapter pair of DP IN and
DP OUT. In case of no DP adapter available, log the type of the DP
adapter that is not available.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
There is no point disabling CL states if the router is unplugged so in
that case return early.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function is not used outside of clx.c so make it static. No
functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
It turns out there is no need to use the actual link rate when
reclaiming bandwidth for USB 3.x. The reason is that we use consumed
bandwidth which is coming from xHCI when releasing bandwidth (for
example for DisplayPort tunneling) and this can be anything between
1000 Mb/s to maximum, so when reclaiming we can just bump it up back to
maximum instead of actual link rate (which is always <= maximum).
This allows us to get rid of couple of unnecessary lines of code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since we have it, use it in the DMA test driver as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
When handling DisplayPort bandwidth request tb_switch_find_by_route() is
called and it returns a router structure with reference count increased.
In order to avoid resource leak call tb_switch_put() when finished.
Fixes: 6ce3563520be ("thunderbolt: Add support for DisplayPort bandwidth allocation mode")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is not needed when firmware connection manager is run so limit this
to software connection manager.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Alex reported that after rebooting the other host the peer-to-peer link
does not come up anymore. The reason for this is that the host that was
not rebooted tries to send the UUID request only 10 times according to
the USB4 Inter-Domain spec and gives up if it does not get reply. Then
when the other side is actually ready it cannot get the link established
anymore. The USB4 Inter-Domain spec requires that the discovery protocol
is restarted in that case so implement this now.
Reported-by: Alex Balcanquall <alex@alexbal.com>
Fixes: 8e1de7042596 ("thunderbolt: Add support for XDomain lane bonding")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
David reported that cppcheck found following possible copy & paste
error from tmu_mode_init():
tmu.c:385:50: style: Expression is always false because 'else if' condition matches previous condition at line 383. [multiCondition]
And indeed this is a bug. Fix it to use correct index
(TB_SWITCH_TMU_MODE_HIFI_UNI).
Reported-by: David Binderman <dcb314@hotmail.com>
Fixes: d49b4f043d63 ("thunderbolt: Add support for enhanced uni-directional TMU mode")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Marek reported that when BlackMagic UltraStudio device is connected the
kernel repeatedly tries to enable lane bonding without success making
the device non-functional. It looks like the device does not have lane 1
connected at all so even though it is enabled we should not try to bond
the lanes. For this reason check that lane 1 is in fact CL0 (connected,
active) before attempting to bond the lanes.
Reported-by: Marek Šanta <teslan223@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217737
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On some systems the IOMMU blocks the first couple of driver ready
messages to the connection manager firmware as can be seen in below
excerpts:
thunderbolt 0000:06:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbb0e3400 flags=0x0020]
or
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [04:00.0] PASID ffffffff fault addr 69974000 [fault reason 05] PTE Write access is not set
The reason is unknown and hard to debug because we were not able to
reproduce this locally. This only happens on certain systems with Intel
Maple Ridge Thunderbolt controller. If there is a device connected when
the driver is loaded the issue does not happen either. Only when there
is nothing connected (so typically when the system is booted up).
We can work this around by sending the driver ready several times. After
a couple of retries the message goes through and the controller works
just fine. For this reason make the number of retries a parameter for
icm_request() and then for Maple Ridge (and Titan Ridge as they us the
same function but this should not matter) increase number of retries
while shortening the timeout accordingly.
Reported-by: Werner Sembach <wse@tuxedocomputers.com>
Reported-by: Konrad J Hambrick <kjhambrick@gmail.com>
Reported-by: Calvin Walton <calvin.walton@kepstin.ca>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214259
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.6 merge window
This includes following Thunderbolt/USB4 changes for the v6.6 merge
window:
- Replace broken mailing list address in the ABI document
- Small improvements.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
Documentation/ABI: thunderbolt: Replace 01.org in contact
thunderbolt: Check Intel vendor ID in tb_switch_get_generation()
thunderbolt: Log a warning if device links are not found
thunderbolt: Set variable tmu_params storage class specifier to static
|
|
Only Intel made Thunderbolt 1-3 devices so to avoid possible confusion
check for the Intel vendor ID before deciding the device generation.
While there move the USB4 check to happen first.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The software connection manager needs the device links in order to
establish the tunnels before the native protocols so log a warning if
they are not found.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The memory allocated in tb_queue_dp_bandwidth_request() needs to be
released once the request is handled to avoid leaking it.
Fixes: 6ce3563520be ("thunderbolt: Add support for DisplayPort bandwidth allocation mode")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Previously, on unplug events, the TMU mode was disabled first
followed by the Time Synchronization Handshake, irrespective of
whether the tb_switch_tmu_rate_write() API was successful or not.
However, this caused a problem with Thunderbolt 3 (TBT3)
devices, as the TSPacketInterval bits were always enabled by default,
leading the host router to assume that the device router's TMU was
already enabled and preventing it from initiating the Time
Synchronization Handshake. As a result, TBT3 monitors experienced
display flickering from the second hot plug onwards.
To address this issue, we have modified the code to only disable the
Time Synchronization Handshake during TMU disable if the
tb_switch_tmu_rate_write() function is successful. This ensures that
the TBT3 devices function correctly and eliminates the display
flickering issue.
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
smatch reports
drivers/thunderbolt/tmu.c:30:3: warning: symbol
'tmu_params' was not declared. Should it be static?
This variable is only used in its defining file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Intel Barlow Ridge Thunderbolt controller has 3 DP IN adapters. This
allows 3 simultaneus DisplayPort tunnels through either one or two USB4
downstream ports (in any possible configuration). Add test case for
this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This adds support for the UHBR (Ultra High Bit Rate) bandwidths
introduced with DisplayPort 2.0 (and refined in 2.1). These can go up to
80 Gbit/s and their support is represent in additional bits in the DP IN
capability.
This updates the DisplayPort tunneling to support these new rates too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make sure the DisplayPort bandwidth allocation mode function names are
consistent with the existing ones, such as USB3.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
For USB4 v2 routers we can also enable CL2 which allows better power
savings and thermal management than CL0s and CL1.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is new TMU mode introduced with the USB4 v2. This mode is simpler
than the existing ones and allows all CL states as well. Enable this for
all links where both side routers are v2 and keep the existing
functionality for the v1 and earlier links.
Currently only support the MedRes rate. We can add the HiFi rate later
too if it turns out to be useful.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Intel Barlow Ridge discrete USB4 controller has larger NOR Flash, hence
increase NVM_MAX_SIZE to support it.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Move constants related to NVM into nvm.c to make the code cleaner. Use a
separate constant for USB4_DATA_DWORDS in usb4.c.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Intel Barlow Ridge discrete USB4 host router has the same limitation as
the previous generations so make sure the USB3 bandwidth limitation
quirk is applied to Barlow Ridge too.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|