summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2019-04-27serial: uartps: console_setup() can't be placed to init sectionMichal Simek1-1/+1
[ Upstream commit 4bb1ce2350a598502b23088b169e16b43d4bc639 ] When console device is rebinded, console_setup() is called again. But marking it as __init means that function will be clear after boot is complete. If console device is binded again console_setup() is not found and error "Unable to handle kernel paging request at virtual address" is reported. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27tty: ldisc: add sysctl to prevent autoloading of ldiscsGreg Kroah-Hartman3-0/+73
commit 7c0cca7c847e6e019d67b7d793efbbe3b947d004 upstream. By default, the kernel will automatically load the module of any line dicipline that is asked for. As this sometimes isn't the safest thing to do, provide a sysctl to disable this feature. By default, we set this to 'y' as that is the historical way that Linux has worked, and we do not want to break working systems. But in the future, perhaps this can default to 'n' to prevent this functionality. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27tty: increase the default flip buffer limit to 2*640KManfred Schlaegl1-1/+1
[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ] We increase the default limit for buffer memory allocation by a factor of 10 to 640K to prevent data loss when using fast serial interfaces. For example when using RS485 without flow-control at speeds of 1Mbit/s an upwards we've run into problems such as applications being too slow to read out this buffer (on embedded devices based on imx53 or imx6). If you want to write transmitted data to a slow SD card and thus have realtime requirements, this limit can become a problem. That shouldn't be the case and 640K buffers fix such problems for us. This value is a maximum limit for allocation only. It has no effect on systems that currently run fine. When transmission is slow enough applications and hardware can keep up and increasing this limit doesn't change anything. It only _allows_ to allocate more than 2*64K in cases we currently fail to allocate memory despite having some. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-03Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdbocWentao Wang1-1/+3
commit 3ec8002951ea173e24b466df1ea98c56b7920e63 upstream. Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03serial: max310x: Fix to avoid potential NULL pointer dereferenceAditya Pakki1-0/+2
commit 3a10e3dd52e80b9a97a3346020024d17b2c272d6 upstream. of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23serial: fsl_lpuart: fix maximum acceptable baud rate with over-samplingTomonori Sakita1-1/+1
[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ] Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20serial: fsl_lpuart: clear parity enable bit when disable parityAndy Duan1-0/+4
[ Upstream commit 397bd9211fe014b347ca8f95a8f4e1017bac1aeb ] Current driver only enable parity enable bit and never clear it when user set the termios. The fix clear the parity enable bit when PARENB flag is not set in termios->c_cflag. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06vt: invoke notifier on screen size changeNicolas Pitre1-0/+1
commit 0c9b1965faddad7534b6974b5b36c4ad37998f8e upstream. User space using poll() on /dev/vcs devices are not awaken when a screen size change occurs. Let's fix that. Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06tty/n_hdlc: fix __might_sleep warningPaul Fulghum1-0/+1
commit fc01d8c61ce02c034e67378cd3e645734bc18c8c upstream. Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user call while current is TASK_INTERRUPTIBLE. This is a false positive since the code path does not depend on current state remaining TASK_INTERRUPTIBLE. The loop breaks out and sets TASK_RUNNING after calling copy_to_user. This patch supresses the warning by setting TASK_RUNNING before calling copy_to_user. [1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324 Signed-off-by: Paul Fulghum <paulkf@microgate.com> Reported-by: syzbot <syzbot+c244af085a0159d22879@syzkaller.appspotmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06tty: Handle problem if line discipline does not have receive_bufGreg Kroah-Hartman1-1/+2
commit 27cfb3a53be46a54ec5e0bd04e51995b74c90343 upstream. Some tty line disciplines do not have a receive buf callback, so properly check for that before calling it. If they do not have this callback, just eat the character quietly, as we can't fail this call. Reported-by: Jann Horn <jannh@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26tty/ldsem: Wake up readers after timed out down_write()Dmitry Safonov1-0/+10
commit 231f8fd0cca078bd4396dd7e380db813ac5736e2 upstream. ldsem_down_read() will sleep if there is pending writer in the queue. If the writer times out, readers in the queue should be woken up, otherwise they may miss a chance to acquire the semaphore until the last active reader will do ldsem_up_read(). There was a couple of reports where there was one active reader and other readers soft locked up: Showing all locks held in the system: 2 locks held by khungtaskd/17: #0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1 #1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3 2 locks held by askfirst/123: #0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58 #1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4 Prevent readers wait for active readers to release ldisc semaphore. Link: lkml.kernel.org/r/20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com Link: lkml.kernel.org/r/20180907045041.GF1110@shao2-debian Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21drivers/tty: add missing of_node_put()Yangtao Li1-0/+1
[ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()Macpaul Lin1-2/+2
commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream. This patch is trying to fix KE issue due to "BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198" reported by Syzkaller scan." [26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198 [26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364 [26364:syz-executor0][name:report&] [26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0 [26364:syz-executor0]Call trace: [26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470 [26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30 [26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128 [26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8 [26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390 [26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20 [26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198 [26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270 [26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90 [26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158 [26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8 [26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0 [26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0 [26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8 [26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208 [26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]The buggy address belongs to the variable: [26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]Memory state around the buggy address: [26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 [26364:syz-executor0][name:report&] ^ [26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa [26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa [26364:syz-executor0][name:report&] [26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint [26364:syz-executor0]------------[cut here]------------ After checking the source code, we've found there might be an out-of-bounds access to "config[len - 1]" array when the variable "len" is zero. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13kgdboc: Fix warning with module buildLaura Abbott1-18/+19
commit 1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream. After 2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is now only used when built in, resulting in a warning when compiled as a module: drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function] static int kgdboc_option_setup(char *opt) ^~~~~~~~~~~~~~~~~~~ Move the function under the appropriate ifdef for builtin only. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13kgdboc: Fix restrict errorLaura Abbott1-4/+2
commit 2dd453168643d9475028cd867c57e65956a0f7f9 upstream. There's an error when compiled with restrict: drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’: drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict] strcpy(config, opt); ^~~~~~~~~~~~~~~~~~~ As the error implies, this is from trying to use config as both source and destination. Drop the call to the function where config is the argument since nothing else happens in the function. Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01tty: wipe buffer if not echoing dataGreg Kroah-Hartman1-2/+17
commit b97b3d9fb57860a60592859e332de7759fd54c2e upstream. If we are not echoing the data to userspace or the console is in icanon mode, then perhaps it is a "secret" so we should wipe it once we are done with it. This mirrors the logic that the audit code has. Reported-by: aszlig <aszlig@nix.build> Tested-by: Milan Broz <gmazyland@gmail.com> Tested-by: Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by: aszlig <aszlig@nix.build> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01tty: wipe buffer.Linus Torvalds1-0/+2
commit c9a8e5fce009e3c601a43c49ea9dbcb25d1ffac5 upstream. After we are done with the tty buffer, zero it out. Reported-by: aszlig <aszlig@nix.build> Tested-by: Milan Broz <gmazyland@gmail.com> Tested-by: Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by: aszlig <aszlig@nix.build> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22termios, tty/tty_baudrate.c: fix buffer overrunH. Peter Anvin1-2/+2
commit 991a25194097006ec1e0d2e0814ff920e59e3465 upstream. On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does not do any limit checking on the tty_baudrate[] array, and in fact a buffer overrun is possible on both architectures. Add a limit check to prevent that situation. This will be followed by a much bigger cleanup/simplification patch. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Requested-by: Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22tty: check name length in tty_find_polling_driver()Miles Chen1-1/+1
[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ] The issue is found by a fuzzing test. If tty_find_polling_driver() recevies an incorrect input such as ',,' or '0b', the len becomes 0 and strncmp() always return 0. In this case, a null p->ops->poll_init() is called and it causes a kernel panic. Fix this by checking name length against zero in tty_find_polling_driver(). $echo ,, > /sys/module/kgdboc/parameters/kgdboc [ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457 uart_get_baud_rate+0xe8/0x190 [ 20.804917] Modules linked in: [ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8 [ 20.805469] Hardware name: linux,dummy-virt (DT) [ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO) [ 20.805895] pc : uart_get_baud_rate+0xe8/0x190 [ 20.806042] lr : uart_get_baud_rate+0xc0/0x190 [ 20.806476] sp : ffffffc06acff940 [ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580 [ 20.806977] x27: 0000000000009600 x26: 0000000000009600 [ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0 [ 20.807576] x23: 0000000000000001 x22: 0000000000000000 [ 20.807807] x21: 0000000000000001 x20: 0000000000000000 [ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000 [ 20.808277] x17: 0000000000000000 x16: 0000000000000000 [ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.808757] x13: ffffffffffffffff x12: 0000000000000001 [ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003 [ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000 [ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0 [ 20.811005] Call trace: [ 20.811214] uart_get_baud_rate+0xe8/0x190 [ 20.811479] serial8250_do_set_termios+0xe0/0x6f4 [ 20.811719] serial8250_set_termios+0x48/0x54 [ 20.811928] uart_set_options+0x138/0x1bc [ 20.812129] uart_poll_init+0x114/0x16c [ 20.812330] tty_find_polling_driver+0x158/0x200 [ 20.812545] configure_kgdboc+0xbc/0x1bc [ 20.812745] param_set_kgdboc_var+0xb8/0x150 [ 20.812960] param_attr_store+0xbc/0x150 [ 20.813160] module_attr_store+0x40/0x58 [ 20.813364] sysfs_kf_write+0x8c/0xa8 [ 20.813563] kernfs_fop_write+0x154/0x290 [ 20.813764] vfs_write+0xf0/0x278 [ 20.813951] __arm64_sys_write+0x84/0xf4 [ 20.814400] el0_svc_common+0xf4/0x1dc [ 20.814616] el0_svc_handler+0x98/0xbc [ 20.814804] el0_svc+0x8/0xc [ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 20.826913] Mem abort info: [ 20.827103] ESR = 0x84000006 [ 20.827352] Exception class = IABT (current EL), IL = 16 bits [ 20.827655] SET = 0, FnV = 0 [ 20.827855] EA = 0, S1PTW = 0 [ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____) [ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000 [ 20.829195] Internal error: Oops: 84000006 [#1] SMP [ 20.829564] Modules linked in: [ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8 [ 20.830545] Hardware name: linux,dummy-virt (DT) [ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.831174] pc : (null) [ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4 [ 20.831727] sp : ffffffc06acff9b0 [ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000 [ 20.832267] x27: ffffff900969e16f x26: 0000000000000000 [ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000 [ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160 [ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8 [ 20.833559] x19: ffffff900969df90 x18: 0000000000000000 [ 20.833878] x17: 0000000000000000 x16: 0000000000000000 [ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.834821] x13: ffffffffffffffff x12: 0000000000000001 [ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007 [ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000 [ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90 [ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____)) [ 20.837396] Call trace: [ 20.837566] (null) [ 20.837816] serial8250_set_termios+0x48/0x54 [ 20.838089] uart_set_options+0x138/0x1bc [ 20.838570] uart_poll_init+0x114/0x16c [ 20.838834] tty_find_polling_driver+0x158/0x200 [ 20.839119] configure_kgdboc+0xbc/0x1bc [ 20.839380] param_set_kgdboc_var+0xb8/0x150 [ 20.839658] param_attr_store+0xbc/0x150 [ 20.839920] module_attr_store+0x40/0x58 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840440] kernfs_fop_write+0x154/0x290 [ 20.840702] vfs_write+0xf0/0x278 [ 20.840942] __arm64_sys_write+0x84/0xf4 [ 20.841209] el0_svc_common+0xf4/0x1dc [ 20.841471] el0_svc_handler+0x98/0xbc [ 20.841713] el0_svc+0x8/0xc [ 20.842057] Code: bad PC value [ 20.842764] ---[ end trace a8835d7de79aaadf ]--- [ 20.843134] Kernel panic - not syncing: Fatal exception [ 20.843515] SMP: stopping secondary CPUs [ 20.844289] Kernel Offset: disabled [ 20.844634] CPU features: 0x0,21806002 [ 20.844857] Memory Limit: none [ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22kgdboc: Passing ekgdboc to command line causes panicHe Zhe1-0/+5
commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream. kgdboc_option_setup does not check input argument before passing it to strlen. The argument would be a NULL pointer if "ekgdboc", without its value, is set in command line and thus cause the following panic. PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1 [ 0.000000] RIP: 0010:strlen+0x0/0x20 ... [ 0.000000] Call Trace [ 0.000000] ? kgdboc_option_setup+0x9/0xa0 [ 0.000000] ? kgdboc_early_init+0x6/0x1b [ 0.000000] ? do_early_param+0x4d/0x82 [ 0.000000] ? parse_args+0x212/0x330 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_options+0x20/0x23 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_param+0x2d/0x39 [ 0.000000] ? setup_arch+0x2f7/0xbf4 [ 0.000000] ? start_kernel+0x5e/0x4c2 [ 0.000000] ? load_ucode_bsp+0x113/0x12f [ 0.000000] ? secondary_startup_64+0xa5/0xb0 This patch adds a check to prevent the panic. Cc: stable@vger.kernel.org Cc: jason.wessel@windriver.com Cc: gregkh@linuxfoundation.org Cc: jslaby@suse.com Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10tty: audit: Fix audit sourcePeter Hurley2-2/+2
[ Upstream commit 6b2a3d628aa752f0ab825fc6d4d07b09e274d1c1 ] The data to audit/record is in the 'from' buffer (ie., the input read buffer). Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode") Cc: stable <stable@vger.kernel.org> # 4.1+ Cc: Miloslav Trmač <mitr@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10tty: serial: fsl_lpuart: fix clearing of receive flagStefan Agner1-3/+6
[ Upstream commit d68827c62a105eec547945daedf4d1d3e283717d ] Commit 8e4934c6d6c6 ("tty: serial: fsl_lpuart: clear receive flag on FIFO flush") implemented clearing of the receive flag by reading the status register only. It turned out that even though we flush the FIFO afterwards, a explicit read of the data register is still required. This leads to a FIFO underrun. To avoid this, follow the advice in the overrun "Operation section": Unconditionally clear RXUF after using RXFLUSH. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10serial: samsung: Add the support for Exynos5433 SoCChanwoo Choi1-20/+36
[ Upstream commit 31ec77aca72ee5920ed3ec3d047734dc0bc43342 ] This patch adds new s3c24xx_serial_drv_data structure for Exynos5433 SoC because Exynos5433 has different fifo size from existing Exynos4 SoC. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Geunsik Lim <geunsik.lim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-10Revert "tty: Fix pty master poll() after slave closes v2"Peter Hurley1-7/+2
[ Upstream commit 2ce3c10c0c3e0d418c1a7a4c838319ba42c75388 ] This reverts commit c4dc304677e8d566572c4738d95c48be150c6606. This fix is superseded by commit 52bce7f8d4fc633c9a9d0646eef58ba6ae9a3b73, 'pty, n_tty: Simplify input processing on final close'. The final close now waits for input processing to complete before destroying the pty, so poll() does not need to special case this condition. Cc: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-13serial: cpm_uart: return immediately from console pollChristophe Leroy1-3/+7
commit be28c1e3ca29887e207f0cbcd294cefe5074bab6 upstream. kgdb expects poll function to return immediately and returning NO_POLL_CHAR when no character is available. Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll") Cc: Jason Wessel <jason.wessel@windriver.com> Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13drivers/tty: add error handling for pcmcia_loop_configZhouyang Jia1-2/+4
[ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ] When pcmcia_loop_config fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pcmcia_loop_config. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26tty: rocket: Fix possible buffer overwrite on register_PCIAnton Vasilyev1-1/+1
[ Upstream commit 0419056ec8fd01ddf5460d2dba0491aad22657dd ] If number of isa and pci boards exceed NUM_BOARDS on the path rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs in register_PCI() on assign rcktpt_io_addr[i]. The patch adds check on upper bound for index of registered board in register_PCI. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-28serial: 8250_dw: always set baud rate in dw8250_set_termiosChen Hu1-1/+1
commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream. dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu <hu1.chen@intel.com> Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-09tty: Fix data race in tty_insert_flip_string_fixed_flagDaeRyong Jeong1-0/+3
[ Upstream commit b6da31b2c07c46f2dcad1d86caa835227a16d9ff ] Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by: DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-09hvc_opal: don't set tb_ticks_per_usec in udbg_init_opal_common()Stewart Smith1-1/+0
[ Upstream commit 447808bf500a7cc92173266a59f8a494e132b122 ] time_init() will set up tb_ticks_per_usec based on reality. time_init() is called *after* udbg_init_opal_common() during boot. from arch/powerpc/kernel/time.c: unsigned long tb_ticks_per_usec = 100; /* sane default */ Currently, all powernv systems have a timebase frequency of 512mhz (512000000/1000000 == 0x200) - although there's nothing written down anywhere that I can find saying that we couldn't make that different based on the requirements in the ISA. So, we've been (accidentally) thwacking the (currently) correct (for powernv at least) value for tb_ticks_per_usec earlier than we otherwise would have. The "sane default" seems to be adequate for our purposes between udbg_init_opal_common() and time_init() being called, and if it isn't, then we should probably be setting it somewhere that isn't hvc_opal.c! Signed-off-by: Stewart Smith <stewart@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11n_tty: Fix stall at n_tty_receive_char_special().Tetsuo Handa1-5/+8
commit 3d63b7e4ae0dc5e02d28ddd2fa1f945defc68d81 upstream. syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is because comparison is not working as expected since ldata->read_head can change at any moment. Mitigate this by explicitly masking with buffer size when checking condition for "while" loops. [1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+18df353d7540aa6b5467@syzkaller.appspotmail.com> Fixes: bc5a5e3f45d04784 ("n_tty: Don't wrap input buffer indices at buffer size") Cc: stable <stable@vger.kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: arc_uart: Fix out-of-bounds access through DT aliasGeert Uytterhoeven1-0/+5
[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ] The arc_uart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a legitimate DTB. Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: fsl_lpuart: Fix out-of-bounds access through DT aliasGeert Uytterhoeven1-0/+4
[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ] The lpuart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: c9e2e946fb0ba5d2 ("tty: serial: add Freescale lpuart driver support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: imx: Fix out-of-bounds access through serial port indexGeert Uytterhoeven1-0/+6
[ Upstream commit 5673444821406dda5fc25e4b52aca419f8065a19 ] The imx_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from platform data, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: ff05967a07225ab6 ("serial/imx: add of_alias_get_id() reference back") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: samsung: Fix out-of-bounds access through serial port indexGeert Uytterhoeven1-0/+4
[ Upstream commit 49ee23b71877831ac087d6083f6f397dc19c9664 ] The s3c24xx_serial_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from an incrementing probe index, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using a legitimate DTB or legitimate board code. Fixes: 13a9f6c64fdc55eb ("serial: samsung: Consider DT alias when probing ports") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30serial: xuartps: Fix out-of-bounds access through DT aliasGeert Uytterhoeven1-1/+1
[ Upstream commit e7d75e18d0fc3f7193b65282b651f980c778d935 ] The cdns_uart_port[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 928e9263492069ee ("tty: xuartps: Initialize ports according to aliases") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02tty: Use __GFP_NOFAIL for tty_ldisc_get()Tetsuo Handa1-6/+5
commit bcdd0ca8cb8730573afebcaae4138f8f4c8eaa20 upstream. syzbot is reporting crashes triggered by memory allocation fault injection at tty_ldisc_get() [1]. As an attempt to handle OOM in a graceful way, we have tried commit 5362544bebe85071 ("tty: don't panic on OOM in tty_set_ldisc()"). But we reverted that attempt by commit a8983d01f9b7d600 ("Revert "tty: don't panic on OOM in tty_set_ldisc()"") due to reproducible crash. We should spend resource for finding and fixing race condition bugs rather than complicate error paths for 2 * sizeof(void *) bytes allocation failure. [1] https://syzkaller.appspot.com/bug?id=489d33fa386453859ead58ff5171d43772b13aa3 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not setTony Lindgren1-0/+11
commit b2d89ad9c9682e795ed6eeb9ed455789ad6cedf1 upstream. At least on droid 4 with control channel in ADM mode, there is no response to Modem Status Command (MSC). Currently gsmtty_modem_update() expects to have data in dlci->modem_rx unless debug & 2 is set. This means that on droid 4, things only work if debug & 2 is set. Let's fix the issue by ignoring empty dlci->modem_rx for ADM mode. In the AMD mode, CMD_MSC will never respond and gsm_process_modem() won't get called to set dlci->modem_rx. And according to ts_127010v140000p.pdf, MSC is only relevant if basic option is chosen, so let's test for that too. Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Dan Williams <dcbw@redhat.com> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Cc: Michael Scott <michael.scott@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02tty: n_gsm: Fix long delays with control frame timeouts in ADM modeTony Lindgren1-1/+11
commit e9ec22547986dd32c5c70da78107ce35dbff1344 upstream. Commit ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") added support for DLCI to stay in Asynchronous Disconnected Mode (ADM). But we still get long delays waiting for commands to other DLCI to complete: --> 5) C: SABM(P) Q> 0) C: UIH(F) Q> 0) C: UIH(F) Q> 0) C: UIH(F) ... This happens because gsm_control_send() sets cretries timer to T2 that is by default set to 34. This will cause resend for T2 times for the control frame. In ADM mode, we will never get a response so the control frame, so retries are just delaying all the commands. Let's fix the issue by setting DLCI_MODE_ADM flag after detecting the ADM mode for the control DLCI. Then we can use that in gsm_control_send() to set retries to 1. This means the control frame will be sent once allowing the other end at an opportunity to switch from ADM to ABM mode. Note that retries will be decremented in gsm_control_retransmit() so we don't want to set it to 0 here. Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Dan Williams <dcbw@redhat.com> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Cc: Michael Scott <michael.scott@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13tty: n_gsm: Allow ADM response in addition to UA for control dlciTony Lindgren1-3/+14
[ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Fix serial console on SNI RM400 machinesThomas Bogendoerfer1-5/+10
[ Upstream commit e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d ] sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK is disabled. Correct usage of clk API to make it work with/without it. Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock) Suggested-by: Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08vt: change SGR 21 to follow the standardsMike Frysinger1-1/+5
commit 65d9982d7e523a1a8e7c9af012da0d166f72fc56 upstream. ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined" since at least March 1984. The Linux kernel has treated it as SGR 22 "normal intensity" since it was added in Linux-0.96b in June 1992. Before that, it was simply ignored. Other terminal emulators have either ignored it, or treat it as double underline now. xterm for example added support in its 304 release (May 2014) [2] where it was previously ignoring it. Changing this behavior shouldn't be an issue: - It isn't a named capability in ncurses's terminfo database, so no script is using libtinfo/libcurses to look this up, or using tput to query & output the right sequence. - Any script assuming SGR 21 will reset intensity in all terminals already do not work correctly on non-Linux VTs (including running under screen/tmux/etc...). - If someone has written a script that only runs in the Linux VT, and they're using SGR 21 (instead of SGR 22), the output should still be readable. imo it's important to change this as the Linux VT's non-conformance is sometimes used as an argument for other terminal emulators to not implement SGR 21 at all, or do so incorrectly. [1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm [2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bcafbee00bc73b3f1eeb9d Signed-off-by: Mike Frysinger <vapier@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08tty: vt: fix up tabstops properlyLinus Torvalds1-4/+4
commit f1869a890cdedb92a3fab969db5d0fd982850273 upstream. Tabs on a console with long lines do not wrap properly, so correctly account for the line length when computing the tab placement location. Reported-by: James Holderness <j4_james@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: 8250_pci: Add Brainboxes UC-260 4 port serial deviceNikola Ciprich1-0/+11
commit 9f2068f35729948bde84d87a40d135015911345d upstream. Add PCI ids for two variants of Brainboxes UC-260 quad port PCI serial cards. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18tty/serial: atmel: add new version check for usartJonas Danielsson1-0/+1
commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream. On our at91sam9260 based board the usart0 and usart1 ports report their versions (ATMEL_US_VERSION) as 0x10302. This version is not included in the current checks in the driver. Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: sh-sci: prevent lockup on full TTY buffersUlrich Hecht1-0/+2
commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream. When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)Linus Torvalds1-2/+2
commit 966031f340185eddd05affcf72b740549f056348 upstream. We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250_pci: Add Amazon PCI serial device IDMatt Wilson1-0/+3
commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html Signed-off-by: Matt Wilson <msw@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09sysrq : fix Show Regs call trace on ARMJibin Xu1-2/+7
[ Upstream commit b00bebbc301c8e1f74f230dc82282e56b7e7a6db ] When kernel configuration SMP,PREEMPT and DEBUG_PREEMPT are enabled, echo 1 >/proc/sys/kernel/sysrq echo p >/proc/sysrq-trigger kernel will print call trace as below: sysrq: SysRq : Show Regs BUG: using __this_cpu_read() in preemptible [00000000] code: sh/435 caller is __this_cpu_preempt_check+0x18/0x20 Call trace: [<ffffff8008088e80>] dump_backtrace+0x0/0x1d0 [<ffffff8008089074>] show_stack+0x24/0x30 [<ffffff8008447970>] dump_stack+0x90/0xb0 [<ffffff8008463950>] check_preemption_disabled+0x100/0x108 [<ffffff8008463998>] __this_cpu_preempt_check+0x18/0x20 [<ffffff80084c9194>] sysrq_handle_showregs+0x1c/0x40 [<ffffff80084c9c7c>] __handle_sysrq+0x12c/0x1a0 [<ffffff80084ca140>] write_sysrq_trigger+0x60/0x70 [<ffffff8008251e00>] proc_reg_write+0x90/0xd0 [<ffffff80081f1788>] __vfs_write+0x48/0x90 [<ffffff80081f241c>] vfs_write+0xa4/0x190 [<ffffff80081f3354>] SyS_write+0x54/0xb0 [<ffffff80080833f0>] el0_svc_naked+0x24/0x28 This can be seen on a common board like an r-pi3. This happens because when echo p >/proc/sysrq-trigger, get_irq_regs() is called outside of IRQ context, if preemption is enabled in this situation,kernel will print the call trace. Since many prior discussions on the mailing lists have made it clear that get_irq_regs either just returns NULL or stale data when used outside of IRQ context,we simply avoid calling it outside of IRQ context. Signed-off-by: Jibin Xu <jibin.xu@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()Lukas Wunner1-1/+1
[ Upstream commit 3236a965486ba0c6043cf2c7b51943d8b382ae29 ] This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND have the same value. If they do, it means the user has passed in invalid data with the TIOCSRS485 ioctl() since RTS must have a different polarity when sending and when not sending. In this case, rs485 mode is not enabled (the RS485_URA bit is not set in the RS485 Enable Register) and this is supposed to be signaled back to the user by clearing the SER_RS485_ENABLED bit in struct serial_rs485 ... except a missing tilde character is preventing that from happening. Fixes: 28e3fb6c4dce ("serial: Add support for Fintek F81216A LPC to 4 UART") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-08 14:41:47 +0300