| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
Peter Griffin <peter.griffin@linaro.org> says:
Hi Martin, James & Alim,
This series adds support to the ufs-exynos driver for Tensor gs101
found in Pixel 6. It was send previously in [1] and [2] but included
the other clock, phy and DTS parts. This series has been split into
just the ufs-exynos part to hopefully make things easier.
With this series, plus the phy, clock and dts changes UFS is
functional upstream for Pixel 6. The SKhynix HN8T05BZGKX015 can be
enumerated, partitions mounted etc.
The series is split into some prepatory patches for ufs-exynos and a
final patch that adds the gs101 support.
Note the sysreg clock has been moved to ufs node as fine grained clock
control around the syscon sysreg register accesses doesn't result in
functional UFS.
regards,
Peter
Link: https://lore.kernel.org/r/20240426122004.2249178-1-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a dedicated compatible and drv_data with associated hooks for gs101 SoC
found on Pixel 6.
Note we make use of the previously added EXYNOS_UFS_OPT_UFSPR_SECURE
option, to skip initialisation of UFSPR registers as these are only
accessible via SMC call.
EXYNOS_UFS_OPT_TIMER_TICK_SELECT option is also set to select tick
source. This has been done so as not to effect any existing platforms.
DBG_OPTION_SUITE on gs101 has different address offsets to other SoCs so
these register offsets now come from uic_attr struct.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-7-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows these registers to be at different offsets or not exist at all
on some SoCs variants.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-6-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Platforms such as Tensor gs101 the pclk frequency is 267Mhz. Increase
PCLK_AVAIL_MAX so we don't fail the frequency check.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-5-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This option is intended to be set for SoCs that have HCI_V2P1_CTRL register
and can select their tick source via IA_TICK_SEL bit.
Source clock selection for timer tick
0x0 = Bus clock (aclk)
0x1 = Function clock (mclk)
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-4-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This option is intended to be set on platforms whose ufspr registers are
only accessible via smc call (such as gs101).
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-3-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the calculation of the utrd pointer. This patch addresses the following
Coverity complaint:
CID 1538170: (#1 of 1): Extra sizeof expression (SIZEOF_MISMATCH)
suspicious_pointer_arithmetic: Adding sq_head_slot * 32UL /* sizeof (struct
utp_transfer_req_desc) */ to pointer hwq->sqe_base_addr of type struct
utp_transfer_req_desc * is suspicious because adding an integral value to
this pointer automatically scales that value by the size, 32 bytes, of the
pointed-to type, struct utp_transfer_req_desc. Most likely, the
multiplication by sizeof (struct utp_transfer_req_desc) in this expression
is extraneous and should be eliminated.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <quic_cang@quicinc.com>
Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240410000751.1047758-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Christoph Hellwig <hch@lst.de> says:
Hi all,
this series converts the SCSI midlayer and LLDDs to use atomic queue
limits API. It is pretty straight forward, except for the mpt3mr
driver which does really weird and probably already broken things by
setting limits from unlocked device iteration callbacks.
I will probably defer the (more complicated) ULD changes to the next
merge window as they would heavily conflict with Damien's zone write
plugging series. With that the series could go in through the SCSI
tree if Jens' ACKs the core block layer bits.
Link: https://lore.kernel.org/r/20240409143748.980206-1-hch@lst.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add MODULE_DEVICE_TABLE() so the module can be properly autoloaded based on
the alias from of_device_id table.
Cc: Will McVicker <willmcvicker@google.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240409203954.80484-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export the module alias information using the MODULE_DEVICE_TABLE() macro
in order to support auto-loading this module for devices that support it.
$ modinfo -F alias out/linux/drivers/ufs/host/ufs-exynos.ko
of:N*T*Ctesla,fsd-ufsC*
of:N*T*Ctesla,fsd-ufs
of:N*T*Csamsung,exynosautov9-ufs-vhC*
of:N*T*Csamsung,exynosautov9-ufs-vh
of:N*T*Csamsung,exynosautov9-ufsC*
of:N*T*Csamsung,exynosautov9-ufs
of:N*T*Csamsung,exynos7-ufsC*
of:N*T*Csamsung,exynos7-ufs
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240409202203.1308163-1-willmcvicker@google.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_cmd_inflight() is used to check whether or not a command is in
progress. Make it skip commands that have already completed by changing
the !blk_mq_request_started(rq) check into blk_mq_rq_state(rq) !=
MQ_RQ_IN_FLIGHT. We cannot rely on lrbp->cmd since lrbp->cmd is not
cleared when a command completes.
Link: https://lore.kernel.org/linux-scsi/20230517223157.1068210-3-bvanassche@acm.org/
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240411071444.51873-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS spec version 2.1 was published more than 10 years ago. It is
vanishingly unlikely that even there are out there platforms that uses
earlier host controllers, let alone that those ancient platforms will ever
run a V6.10 kernel. To be extra cautious, leave out removal of UFSHCI 2.0
support from this patch, and just remove support of host controllers prior
to UFS2.0.
This patch removes some legacy tuning calls that no longer apply.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240410183720.908-2-avri.altman@wdc.com
Acked-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the SCSI host's dma_alignment field and set it in ->init and remove the
now unused config_scsi_dev method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-9-hch@lst.de
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows bsg_setup_queue() to pass them to blk_mq_alloc_queue() and thus
set up the limits at queue allocation time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-3-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let's add the checks to warn the user if the ICC scaling is not supported
for the gear/lane values and also fallback to the max value if that's the
case.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-2-958412a5eb45@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
These entries are necessary to scale the interconnect bandwidth while
operating in Gear 5.
Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Andrew Halaney <ahalaney@redhat.com> says:
Please review with care as I'm not all that confident in this subject.
UFS has a lot of mb() variants used, most with comments saying "ensure
this takes effect before continuing". mb()'s aren't really the way to
guarantee that, a read back is the best method.
Some of these though I think could go a step further and remove the
mb() variant without a read back. As far as I can tell there's no real
reason to ensure it takes effect in most cases (there's no delay() or
anything afterwards, and eventually another readl()/writel() happens
which is by definition ordered). Some of the patches in this series do
that if I was confident it was safe (or a reviewer pointed out prior
that they thought it was safe to do so).
Thanks in advance for the help,
Andrew
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-0-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently a wmb() is used to ensure that writes to the
UTP_TASK_REQ_LIST_BASE* regs are completed prior to following writes to
the run/stop registers.
wmb() ensures that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring the bits have taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, none of that is necessary here. All of the writel()/readl()'s here
are to the same endpoint, so they will be ordered. There's no subsequent
delay() etc that requires it to have taken effect already, so no
readback is necessary here.
For that reason just drop the wmb() altogether.
Fixes: 897efe628d7e ("scsi: ufs: add missing memory barriers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-11-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the doorbell is written to and a wmb() is used to commit it
immediately.
wmb() ensures that the write completes before following writes occur, but
completion doesn't mean that it isn't stored in a buffer somewhere. The
recommendation for ensuring this bit has taken effect on the device is to
perform a read back to force it to make it all the way to the device. This
is documented in device-io.rst and a talk by Will Deacon on this can be
seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, completion and taking effect aren't necessary to guarantee here.
There's already other examples of the doorbell being rung that don't do
this. The writel() of the doorbell guarantees prior writes by this thread
(to the request being setup for example) complete prior to the ringing of
the doorbell, and the following wait_for_completion_io_timeout() doesn't
require any special memory barriers either.
With that in mind, just remove the wmb() altogether here.
Fixes: ad1a1b9cd67a ("scsi: ufs: commit descriptors before setting the doorbell")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-10-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495cf ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the UTP_TASK_REQ_LIST_BASE_L/UTP_TASK_REQ_LIST_BASE_H regs are
written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bits hit the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 88441a8d355d ("scsi: ufs: core: Add hibernation callbacks")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-7-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the testbus configuration is written and completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-3-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Core in scsi_register_driver() already sets the .owner, so driver does not
need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240328-b4-module-owner-scsi-v1-6-c86cb4f6e91c@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a dev command times out in MCQ mode, a successfully cleared command
should cause a retry. However, because we currently return 0, the caller
considers the command a success which causes the following error to be
logged: "Invalid offset 0x0 in descriptor IDN 0x9, length 0x0".
Retry if clearing the command was successful.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240328111244.3599-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When wl suspend error occurs, for example BKOP or SSU timeout, the host
triggers an error handler and returns -EBUSY to break the wl suspend
process. However, it is possible for the runtime PM to enter wl suspend
again before the error handler has finished, and return -EINVAL because the
device is in an error state. To address this, ensure that the rumtime PM
waits for the error handler to finish, or trigger the error handler in such
cases, because returning -EINVAL can cause the I/O to hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240329015036.15707-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
MediaTek platforms"
Peter Wang <peter.wang@mediatek.com> says:
This series fixes some defects and provide features in MediaTek UFS
drivers.
Link: https://lore.kernel.org/r/20240315083448.7185-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add mtcmos control function and config.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reset mphy when resetting host. Backup mphy setting after mphy reset
control get. Restore mphy setting after mphy reset.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mediatek host power includes two parts:
1. ufshci power, which is the main power of ufs host controller.
2. ufshci crypto sram power, which is the power of ufs crypto engine.
The host power control is actually controlling crypto sram power. Rename
it.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-6-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move sip command and associated define to a new sip header file.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-5-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add new mediatek host cap UFS_MTK_CAP_DISABLE_MCQ to allow disabling MCQ
feature by assigning dts boolean property "mediatek,ufs-disable-mcq".
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-4-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix Mediatek TX skew issue by checking dts setting and vendor/model. Then
set PA_TACTIVATE to 8.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240315083448.7185-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
VSX (the upper layer of VCCQ/VCCQ2) should:
1. Always set to hpm mode if ufs device is active.
2. Enter lpm mode only if ufs device is not active.
VCCQX should:
1. Keep hpm mode if vccq and vccq2 not set in dts.
2. Keep hpm mode if vcc not set in dts keep vcc always on.
3. Keep hpm if broken vcc keep vcc always on and not allow vccq lpm.
4. Except upper case, can enter lpm mode if ufs device is not active.
Acked-by: Chun-Hung Wu <Chun-Hung.Wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240315083448.7185-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avri Altman <avri.altman@wdc.com> says:
Device management commands are constructed for query commands that are
being issued by the driver, but also for raw device management
commands originated by the bsg module, and recently, by the advanced
rpmb handler. Thus, the same code fragments, e.g. locking, composing
the command, composing the upiu etc., appear over and over. Remove
those duplications. Theoretically, there should be no functional
change.
Link: https://lore.kernel.org/r/20240309081104.5006-1-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move some code fragments into ufshcd_prepare_req_desc_hdr() so it can be
used throughout.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-5-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move out some of the dev_cmd initializations so they can be used elsewhere.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-4-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move out the actual command issue from exec_dev_cmd it can be used
elsewhere. While at it, remove a redundant "lrbp->cmd = NULL" assignment.
Also, the device management commands that are originated from the
ufs-bsg code path, are being traced now, which wasn't the case before.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Group those 3 calls that repeat for every device management command into
lock and unlock handlers.
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-2-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the outstanding updates from the 6.9/scsi-queue branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
|
The MSM8996 DT doesn't provide frequency limits for the core_clk_unipro
clock, which results in miscalculation of the cycles_in_1us value. Provide
the backwards-compatible default to support existing MSM8996 DT files.
Fixes: b4e13e1ae95e ("scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES")
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: stable@vger.kernel.org # 6.7.x
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-msm8996-fix-ufs-v3-1-40aab49899a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
