summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/udc/renesas_usb3.c
AgeCommit message (Collapse)AuthorFilesLines
2023-07-25usb: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-03Merge tag 'usb-6.5-rc1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1. Included in here are: - Lots of USB4/Thunderbolt additions and updates for new hardware types and fixes as people are starting to get access to the hardware in the wild - new gadget controller driver, cdns2, added - new typec drivers added - xhci driver updates - typec driver updates - usbip driver fixes - usb-serial driver updates and fixes - lots of smaller USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC usb: host: xhci: Do not re-initialize the XHCI HC if being removed usb: typec: nb7vpq904m: fix CONFIG_DRM dependency usbip: usbip_host: Replace strlcpy with strscpy usb: dwc3: gadget: Propagate core init errors to UDC during pullup USB: serial: option: add LARA-R6 01B PIDs usb: ulpi: Make container_of() no-op in to_ulpi_dev() usb: gadget: legacy: fix error return code in gfs_bind usb: typec: fsa4480: add support for Audio Accessory Mode usb: typec: fsa4480: rework mux & switch setup to handle more states usb: typec: ucsi: call typec_set_mode on non-altmode partner change USB: gadget: f_hid: make hidg_class a static const structure USB: gadget: f_printer: make usb_gadget_class a static const structure USB: mon: make mon_bin_class a static const structure USB: gadget: udc: core: make udc_class a static const structure USB: roles: make role_class a static const structure dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt dt-bindings: usb: Add StarFive JH7110 USB controller dt-bindings: usb: dwc3: Add IPQ9574 compatible usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup" ...
2023-06-13usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} errorBiju Das1-2/+2
Currently {modprobe, bind} after {rmmod, unbind} results in probe failure. genirq: Flags mismatch irq 22. 00000004 (85070400.usb3drd) vs. 00000004 (85070400.usb3drd) renesas_usb3: probe of 85070000.usb3peri failed with error -16 The reason is, it is trying to register an interrupt handler for the same IRQ twice. The devm_request_irq() was called with the parent device. So the interrupt handler won't be unregistered when the usb3-peri device is unbound. Fix this issue by replacing "parent dev"->"dev" as the irq resource is managed by this driver. Fixes: 9cad72dfc556 ("usb: gadget: Add support for RZ/V2M USB3DRD driver") Cc: stable <stable@kernel.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-ID: <20230530161720.179927-1-biju.das.jz@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-28usb: gadget/renesas_usb3: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230517230239.187727-40-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23usb: gadget: udc: renesas_usb3: Fix use after free bug in ↵Zheng Wang1-0/+1
renesas_usb3_remove due to race condition In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: gadget: renesas_usb3: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/gadget/udc/renesas_usb3.c:2811:34: error: ‘usb3_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230311173624.263189-5-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: gadget: udc: renesas_usb3: remove R-Car H3 ES1.* handlingWolfram Sang1-22/+1
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-12-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25usb: gadget: udc: renesas_usb3: Add role switch support for RZ/V2MBiju Das1-5/+29
As RZ/V2M has both HOST and PERI reset module, we need to do reset release before accessing registers in respective IP module. This patch adds role switch support for RZ/V2M. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230121145853.4792-7-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25usb: gadget: Add support for RZ/V2M USB3DRD driverBiju Das1-37/+65
The RZ/V2M USB3.1 Gen1 Interface (USB) composed of a USB3.1 Gen1 Dual Role Device controller (USB3DRD), a USB3.1 Gen1 Host controller (USB3HOST), a USB3.1 Gen1 Peripheral controller (USB3PERI). The reset for both host and peri are located in USB3DRD block. The USB3DRD registers are mapped in the AXI address space of the Peripheral module. Add USB3DRD driver to handle reset for both host and peri modules. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230121145853.4792-6-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: gadget: udc: renesas_usb3: Add support for RZ/V2MPhil Edworthy1-27/+104
RZ/V2M (r9a09g011) has a few differences: - The USB3_DRD_CON register has moved, its called USB_PERI_DRD_CON in the RZ/V2M hardware manual. It has additional bits for host and peripheral reset that need to cleared to use usb host and peripheral respectively. - The USB3_OTG_STA, USB3_OTG_INT_STA and USB3_OTG_INT_ENA registers have been moved and renamed to USB_PERI_DRD_STA, USB_PERI_DRD_INT_STA and USB_PERI_DRD_INT_E. - The IDMON bit used in the above regs for role detection have moved from bit 4 to bit 0. - RZ/V2M has an separate interrupt for DRD, i.e. for changes to IDMON. - There are reset lines for DRD and USBP - There is another clock, managed by runtime PM. Whilst the hardware can support 16 pipes, it is artifically limited based on the ram per pipe calculation. With the 4KB ram per pipe, we can support 9 pipes consisting of 4xIN pipes, 4xOUT pipes and PIPE0. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220804192220.128601-3-phil.edworthy@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03usb: Drop commas after SoC match table sentinelsGeert Uytterhoeven1-1/+1
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/5cae409f647272a5679291ebc0000bfeccc14160.1646311762.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transitionAdam Ford1-0/+2
The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuseGeert Uytterhoeven1-10/+7
soc_device_match() is intended as a last resort, to handle e.g. quirks that cannot be handled by matching based on a compatible value. As the device nodes for the Renesas USB 3.0 Peripheral Controller on R-Car E3 and RZ/G2E do have SoC-specific compatible values, the latter can and should be used to match against these devices. This also fixes support for the USB 3.0 Peripheral Controller on the R-Car E3e (R8A779M6) SoC, which is a different grading of the R-Car E3 (R8A77990) SoC, using the same SoC-specific compatible value. Fixes: 30025efa8b5e75f5 ("usb: gadget: udc: renesas_usb3: add support for r8a77990") Fixes: 546970fdab1da5fe ("usb: gadget: udc: renesas_usb3: add support for r8a774c0") Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/760981fb4cd110d7cbfc9dcffa365e7c8b25c6e5.1628696960.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-24usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()Yoshihiro Shimoda1-2/+3
The usb3_start_pipen() is called by renesas_usb3_ep_queue() and usb3_request_done_pipen() so that usb3_start_pipen() is possible to cause a race when getting usb3_first_req like below: renesas_usb3_ep_queue() spin_lock_irqsave() list_add_tail() spin_unlock_irqrestore() usb3_start_pipen() usb3_first_req = usb3_get_request() --- [1] --- interrupt --- usb3_irq_dma_int() usb3_request_done_pipen() usb3_get_request() usb3_start_pipen() usb3_first_req = usb3_get_request() ... (the req is possible to be finished in the interrupt) The usb3_first_req [1] above may have been finished after the interrupt ended so that this driver caused to start a transfer wrongly. To fix this issue, getting/checking the usb3_first_req are under spin_lock_irqsave() in the same section. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: roles: Provide the switch drivers handle to the switch in the APIHeikki Krogerus1-12/+14
The USB role callback functions had a parameter pointing to the parent device (struct device) of the switch. The assumption was that the switch parent is always the controller. Firstly, that may not be true in every case, and secondly, it prevents us from supporting devices that supply multiple muxes. Changing the first parameter of usb_role_switch_set_t and usb_role_switch_get_t from struct device to struct usb_role_switch. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-19usb: gadget: renesas_usb3: remove useless cast for driver.nameCorentin Labbe1-1/+1
device_driver name is const char pointer, so it not useful to cast udc_name (which is already const char). Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/1582054383-35760-15-git-send-email-clabbe@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-18Merge tag 'usb-for-v5.5' of ↵Greg Kroah-Hartman1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.5 We have TI's glue layer for the Cadence USB3 controller going upstream. Tegra's XUDC driver is also going upstream with this pull request. Apart from these two big features, we have a bunch of patches switching over to devm_platform_ioremap_resource() in order to simplify code a little; and a non-critical fix for DWC3 usage via kexec. * tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits) usb: dwc3: of-simple: add a shutdown usb: cdns3: Add TI specific wrapper driver dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller usb: mtu3: fix race condition about delayed_status usb: gadget: Add UDC driver for tegra XUSB device mode controller usb: dwc3: debug: Remove newline printout usb: dwc2: use a longer core rest timeout in dwc2_core_reset() usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe() USB: gadget: udc: clean up an indentation issue usb: gadget: Quieten gadget config message phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq usb: gadget: Remove set but not used variable 'opts' in msg_do_config usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config usb: mtu3: add a new function to do status stage usb: gadget: configfs: fix concurrent issue between composite APIs usb: gadget: f_tcm: Provide support to get alternate setting in tcm function usb: gadget: Correct NULL pointer checking in fsl gadget usb: fsl: Remove unused variable USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 ...
2019-11-14usb: gadget: udc: renesas_usb3: create debugfs directory under usb rootChunfeng Yun1-1/+1
Now the USB gadget subsystem can use the USB debugfs root directory, so move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1573541519-28488-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman1-5/+6
We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27usb: gadget: udc: renesas_usb3: Fix __le16 warningsYoshihiro Shimoda1-5/+6
This patch fixes the following sparse warnings by using a macro and a suitable variable type. drivers/usb/gadget/udc/renesas_usb3.c:1547:17: warning: restricted __le16 degrades to integer drivers/usb/gadget/udc/renesas_usb3.c:1550:43: warning: incorrect type in argument 2 (different base types) drivers/usb/gadget/udc/renesas_usb3.c:1550:43: expected unsigned short [usertype] addr drivers/usb/gadget/udc/renesas_usb3.c:1550:43: got restricted __le16 [usertype] wValue drivers/usb/gadget/udc/renesas_usb3.c:1607:24: warning: incorrect type in assignment (different base types) drivers/usb/gadget/udc/renesas_usb3.c:1607:24: expected unsigned short [assigned] [usertype] status drivers/usb/gadget/udc/renesas_usb3.c:1607:24: got restricted __le16 [usertype] drivers/usb/gadget/udc/renesas_usb3.c:1775:17: warning: restricted __le16 degrades to integer Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: udc: renesas_usb3: add suspend event supportVeeraiyan Chidambaram1-0/+15
In R-Car Gen3 USB 3.0 Function, if host is detached an interrupt will be generated and Suspended state bit is set in interrupt status register. Interrupt handler will call driver->suspend(composite_suspend) if suspended state bit is set. composite_suspend will call ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed by user space application via /dev/ep0. To be able to detect the host detach, USB_INT_1_B2_SPND to cover the Suspended bit of the B2_SPND_OUT[9] from the USB Status Register (USB_STA) register and perform appropriate action in the usb3_irq_epc_int_1 function. Without this commit, disconnection of the phone from R-Car H3 ES2.0 Salvator-X CN11 port is not recognized and reverse role switch does not happen. If phone is connected again it does not enumerate. With this commit, disconnection will be recognized and reverse role switch will happen by a user space application. If phone is connected again it will enumerate properly and will become visible in the output of 'lsusb'. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-22usb: gadget: renesas_usb3: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-04usb: gadget: renesas_usb3: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190904094836.18532-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-19Merge 5.3-rc5 into usb-nextGreg Kroah-Hartman1-2/+3
We need the usb fixes in here as well for other patches to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-12usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"Yoshihiro Shimoda1-2/+3
Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Fixes: cc995c9ec118 ("usb: gadget: udc: renesas_usb3: add support for usb role swap") Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb: gadget: udc: renesas_usb3: remove redundant assignment to retColin Ian King1-1/+1
Variable ret is being initialized with a value that is never read and ret is being re-assigned immediately after the initialization in both paths of an if statement. This is redundant and can be removed. Addresses-Coverity: ("Unused value") Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: udc: renesas_usb3: Enhance role switch supportBiju Das1-7/+84
The RZ/G2E cat874 board has a type-c connector connected to hd3ss3220 usb type-c drp port controller. Enhance role switch support to assign the role requested by connector device using the usb role switch class framework. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-01-28usb: gadget: udc: renesas_usb3: add support for r8a774c0Fabrizio Castro1-0/+4
RZ/G2E USB 3.0 implementation is like the one found on R-Car E3, therefore add the same quirk. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_deviceYoshihiro Shimoda1-5/+10
This patch adds a safety connection way for "forced_b_device" with "workaround_for_vbus" like below: < Example for R-Car E3 Ebisu > # modprobe <any usb gadget driver> # echo 1 > /sys/kernel/debug/ee020000.usb/b_device (connect a usb cable to host side.) # echo 2 > /sys/kernel/debug/ee020000.usb/b_device Previous code should have connected a usb cable before the "b_device" is set to 1 on the Ebisu board. However, if xHCI driver on the board is probed, it causes some troubles: - Conflicts USB VBUS/signals between the board and another host. - "Cannot enable. Maybe the USB cable is bad?" might happen on both the board and another host with a usb hub. - Cannot enumerate a usb gadget correctly because an interruption of VBUS change happens unexpectedly. Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-05usb: gadget: udc: renesas_usb3: add support for r8a77990Yoshihiro Shimoda1-0/+11
Since r8a77990 (R-Car E3) doesn't have VBUS detect pin and number of ramif is 4, this patch adds a new renesas_usb3_priv variable for the SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: gadget: udc: renesas_usb3: Fix b-device mode for "workaround"Yoshihiro Shimoda1-0/+3
If the "workaround_for_vbus" is true, the driver will not call usb_disconnect(). So, since the controller keeps some registers' value, the driver doesn't re-enumarate suitable speed after the b-device mode is disabled. To fix the issue, this patch adds usb_disconnect() calling in renesas_usb3_b_device_write() if workaround_for_vbus is true. Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode") Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-08-29usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0Yoshihiro Shimoda1-1/+4
This patch fixes an issue that maxpacket size of ep0 is incorrect for SuperSpeed. Otherwise, CDC NCM class with SuperSpeed doesn't work correctly on this driver because its control read data size is more than 64 bytes. Reported-by: Junki Kato <junki.kato.xk@renesas.com> Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Junki Kato <junki.kato.xk@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: gadget: udc: renesas_usb3: Add register of usb role switchYoshihiro Shimoda1-1/+83
This patch adds role switch support for R-Car SoCs into the USB 3.0 peripheral driver. Some R-Car SoCs (e.g. R-Car H3) have USB 3.0 dual-role device controller which has the USB 3.0 xHCI host and Renesas USB 3.0 peripheral. Unfortunately, the mode change register (DRD_CON) contains the USB 3.0 peripheral controller side only. So, this renesas_usb3 driver manages the DRD_CON now. However, in peripheral mode, the host should stop. Also the host hardware needs to reinitialize its own registers when the mode changes from peripheral to host mode. Otherwise, the host cannot work correctly (e.g. detect a device as high-speed). To achieve this reinitialization by a driver, this driver also registers a role switch driver to manage the DRD_CON and get a device pointer of usb 3.0 host from "companion" property of OF. Then, when the usb role is changed, renesas_usb3_role_switch_set() will attach/release the xhci-plat driver to reinitialize the host hardware. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31USB: gadget: udc: renesas_usb3: no need to check return value of ↵Greg Kroah-Hartman1-15/+3
debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Felipe Balbi <balbi@kernel.org> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-21usb: gadget: udc: renesas_usb3: fix double phy_put()Yoshihiro Shimoda1-2/+0
This patch fixes an issue that this driver cause double phy_put() calling. This driver must not call phy_put() in the remove because the driver calls devm_phy_get() in the probe. Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy") Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnectingYoshihiro Shimoda1-0/+7
This patch fixes an issue that reconnection is possible to fail because unexpected state handling happens by the irqs. To fix the issue, the driver disables the controller's irqs when disconnected. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns errorYoshihiro Shimoda1-3/+5
This patch fixes an issue that this driver ignores errors other than the non-existence of the device, f.e. a memory allocation failure in devm_phy_get(). So, this patch replaces devm_phy_get() with devm_phy_optional_get(). Reported-by: Simon Horman <horms+renesas@verge.net.au> Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy") Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udcYoshihiro Shimoda1-8/+8
This patch fixes an issue that this driver cannot call phy_init() if a gadget driver is alreadly loaded because usb_add_gadget_udc() might call renesas_usb3_start() via .udc_start. This patch also revises the typo (s/an optional/optional/). Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy") Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udcYoshihiro Shimoda1-1/+1
This patch fixes an issue that this driver causes panic if a gadget driver is already loaded because usb_add_gadget_udc() might call renesas_usb3_start() via .udc_start, and then pm_runtime_get_sync() in renesas_usb3_start() doesn't work correctly. Note that the usb3_to_dev() macro should not be called at this timing because the macro uses the gadget structure. Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()") Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should remove debugfsYoshihiro Shimoda1-1/+7
This patch fixes an issue that this driver doesn't remove its debugfs. Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode") Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-02-12usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove()Yoshihiro Shimoda1-1/+1
This patch fixes an issue that the renesas_usb3_remove() causes NULL pointer dereference because the usb3_to_dev() macro will use the gadget instance and it will be deleted before. Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-28usb: gadget: udc: renesas_usb3: fix number of the pipesYoshihiro Shimoda1-1/+1
This controller on R-Car Gen3 has 6 pipes that included PIPE 0 for control actually. But, the datasheet has error in writing as it has 31 pipes. (However, the previous code defined 30 pipes wrongly...) Anyway, this patch fixes it. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-07USB: gadget: udc: Remove redundant license textGreg Kroah-Hartman1-4/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Raviteja Garimella <raviteja.garimella@broadcom.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Johan Hovold <johan@kernel.org> Cc: Al Cooper <alcooperx@gmail.com> Cc: Srinath Mannam <srinath.mannam@broadcom.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: "Felix Hädicke" <felixhaedicke@web.de> Cc: Peter Chen <peter.chen@nxp.com> Cc: Allen Pais <allen.lkml@gmail.com> Cc: Yuyang Du <yuyang.du@intel.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03usb: gadget: udc: renesas_usb3: make const array max_packet_array staticColin Ian King1-1/+1
Don't populate the const array max_packet_array on the stack, instead make it static. Makes the object code smaller by over 90 bytes: Before: text data bss dec hex filename 34337 5612 128 40077 9c8d renesas_usb3.o After: text data bss dec hex filename 34149 5708 128 39985 9c31 renesas_usb3.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27Merge tag 'extcon-next-for-4.15' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-next Chanwoo writes: Update extcon for 4.15 Detailed description for this pull request: 1. Split out extcon header file for consumer and provider device : The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device. - include/linux/extcon-provider.h includes API for the provider device driver. - include/linux/extcon.h includes the API for the consumer device driver. 2. Support the SmartDock accessory on extcon-max77843.c device driver - Support the SmartDock accessory which detects following connectors at the same time. : USB host throught USB hub for mouse, keyboard and so on. : MHL connector for video output. : Charger connector for battery charging. - It tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. 3. Fix the minor issue of extcon driver - Delete the unneeded initialization in extcon-max14577. - Make extcon_info static const in order to fix the warning.
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi1-1/+1
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-19usb: gadget: udc: renesas_usb3: Use of_device_get_match_data() helperGeert Uytterhoeven1-6/+1
Use the of_device_get_match_data() helper instead of open coding, postponing the matching until when it's really needed. Note that the renesas_usb3 driver is used with DT only, so there's always a valid match. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-18 11:49:06 +0300