summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)AuthorFilesLines
2014-02-12Remove MACH_OMAP_H4_OTGRichard Weinberger1-1/+1
The symbol is an orphan, get rid of it. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-24Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-09usb: delete non-required instances of include <linux/init.h>Paul Gortmaker13-13/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08usb: gadget: remove unused variable in gr_queue_int()Wei Yongjun1-3/+0
The variable 'dev' is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08usb: gadget: s3c-hsotg: remove duplicated include from s3c-hsotg.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-26Merge tag 'v3.13-rc4' into next/cleanupOlof Johansson9-23/+28
Linux 3.13-rc4
2013-12-24usb: gadget: at91_udc: fix build warningFelipe Balbi1-7/+7
commit e117e742 (usb: gadget: add "maxpacket_limit" field to struct usb_ep) added a build warning to at91_udc when it passed the wrong argument to usb_ep_set_maxpacket_limit(). Fix this by passing correct argument. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-24usb: gadget: Add UDC driver for Aeroflex Gaisler GRUSBDCAndreas Larsson4-0/+2470
This adds an UDC driver for GRUSBDC USB Device Controller cores available in the GRLIB VHDL IP core library. The driver only supports DMA mode. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-24usb: gadget: s3c-hsotg: get phy bus width from phy subsystemMatt Porter2-1/+14
Adds support for querying the phy bus width from the generic phy subsystem. Configure UTMI bus width in GUSBCFG based on this value. Signed-off-by: Matt Porter <mporter@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-24usb: gadget: s3c-hsotg: enable generic phy supportMatt Porter1-16/+39
Adds support for the generic PHY subsystem. Generic PHY support is probed and then the driver falls back to checking for an old style USB PHY and pdata if not found. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-24usb: gadget: s3c-hsotg: add snps,dwc2 compatible stringMatt Porter1-0/+1
Enable support for the dwc2 binding. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-24usb: gadget: s3c-hsotg: enable build for other platformsMatt Porter2-6/+4
Remove unused Samsung-specific machine include and Kconfig dependency on S3C. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-20usb: gadget: fix up some comments about CONFIG_USB_DEBUGGreg Kroah-Hartman2-2/+2
These two gadget drivers said that their #endif was for CONFIG_USB_DEBUG, but they really were not, so fix them up to be correct. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19usb: gadget: should use u16 type variable to store MaxPowerDu, ChangbinX1-1/+1
From 7e827a0d300e084f74c65122baa5e3193f9a7f18 Mon Sep 17 00:00:00 2001 From: "Du, Changbin" <changbinx.du@intel.com> Date: Mon, 16 Dec 2013 20:32:13 +0800 Subject: [PATCH] usb/gadget: should use u16 type variable to store MaxPower The MaxPower field is of u16 type. So using u8 type variable can break data (high byte lost). Signed-off-by: Du, Changbin <changbinx.du@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19usb: gadget: configfs: include appropriate header file in configfs.cRashika Kheria1-0/+1
Include appropriate header file drivers/usb/gadget/configfs.h in gadget/configfs.c because function unregister_gadget_item() has its prototype declaration in gadget/configfs.h. This eliminates the following warning in gadget/configfs.c: drivers/usb/gadget/configfs.c:994:6: warning: no previous prototype for ‘unregister_gadget_item’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19Merge tag 'v3.13-rc4' into nextFelipe Balbi8-21/+26
Linux 3.13-rc4 * tag 'v3.13-rc4': (1001 commits) Linux 3.13-rc4 null_blk: mem garbage on NUMA systems during init radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() Revert "selinux: consider filesystem subtype in policies" igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference ARM: fix asm/memory.h build error dm array: fix a reference counting bug in shadow_ablock dm space map: disallow decrementing a reference count below zero mm: memcg: do not allow task about to OOM kill to bypass the limit mm: memcg: fix race condition between memcg teardown and swapin thp: move preallocated PTE page table on move_huge_pmd() mfd/rtc: s5m: fix register updating by adding regmap for RTC rtc: s5m: enable IRQ wake during suspend rtc: s5m: limit endless loop waiting for register update rtc: s5m: fix unsuccesful IRQ request during probe drivers/rtc/rtc-s5m.c: fix info->rtc assignment include/linux/kernel.h: make might_fault() a nop for !MMU drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap procfs: also fix proc_reg_get_unmapped_area() for !MMU case ... Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_sourcesink: Fix sparse warningJingoo Han1-4/+4
Make local symbols static in order to fix the following sparse warnings. drivers/usb/gadget/f_sourcesink.c:205:34: warning: symbol 'ss_source_comp_desc' was not declared. Should it be static? drivers/usb/gadget/f_sourcesink.c:222:34: warning: symbol 'ss_sink_comp_desc' was not declared. Should it be static? drivers/usb/gadget/f_sourcesink.c:240:34: warning: symbol 'ss_iso_source_comp_desc' was not declared. Should it be static? drivers/usb/gadget/f_sourcesink.c:258:34: warning: symbol 'ss_iso_sink_comp_desc' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_serial: Fix sparse warningJingoo Han1-1/+1
Make local symbol static in order to fix the following sparse warning. drivers/usb/gadget/f_serial.c:357:21: warning: symbol 'gser_alloc' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_phonet: Fix sparse warningJingoo Han1-1/+1
Make local symbol static in order to fix the following sparse warning. drivers/usb/gadget/f_phonet.c:692:21: warning: symbol 'phonet_alloc' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_obex: Fix sparse warningJingoo Han1-1/+1
Make local symbol static in order to fix the following sparse warning. drivers/usb/gadget/f_obex.c:502:21: warning: symbol 'obex_alloc' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_ncm: Fix sparse warningJingoo Han1-1/+1
Make local symbol static in order to fix the following sparse warning. drivers/usb/gadget/f_ncm.c:1389:21: warning: symbol 'ncm_alloc' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_mass_storage: Fix sparse warningJingoo Han1-1/+1
Use NULL instead of 0 when returning pointer, to fix the following sparse warnings. drivers/usb/gadget/f_mass_storage.c:3114:60: warning: Using plain integer as NULL pointer drivers/usb/gadget/f_mass_storage.c:3114:63: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: f_loopback: Fix sparse warningJingoo Han1-2/+2
Make local symbols static in order to fix the following sparse warnings. drivers/usb/gadget/f_loopback.c:123:34: warning: symbol 'ss_loop_source_comp_desc' was not declared. Should it be static? drivers/usb/gadget/f_loopback.c:139:34: warning: symbol 'ss_loop_sink_comp_desc' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: atmel_usba: Fix sparse warningJingoo Han1-1/+1
'usba_gadget_template' is used only in this file. Thus, make 'usba_gadget_template' static, in order to fix the following sparse warning. warning: symbol 'usba_gadget_template' was not declared. Should it be static? Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: atmel_usba: Use devm_*() functionsJingoo Han1-47/+17
Use devm_*() functions to make cleanup paths simpler. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: nokia: fix error recovery path for optional functionsAndrzej Pietrasiewicz1-3/+3
In the nokia gadget some USB functions (obex 1 and 2, phonet) are optional. If at the start of nokia_bind_config e.g. fi_phonet is an error pointer, which can happen because we don't fail the bind process if usb_get_function_instance() fails for fi_phonet, then f_phonet is NULL, and phonet_stat = usb_add_function(c, f_phonet); is never called and phonet_stat remains 0. If, in these circumstances, we hit the err_conf label then !phonet_stat evaluates to true and we try usb_remove_function() with its second parameter being f_phonet which is NULL and it causes NULL pointer dereference. This patch changes the initial values of (obex1|obex2|phonet)_stat to a nonzero value so that if the err_conf label is hit while the respective functions have not been acquired the usb_remove_function() is not called for those functions. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17usb: gadget: add "maxpacket_limit" field to struct usb_epRobert Baldyga25-52/+64
This patch adds "maxpacket_limit" to struct usb_ep. This field contains maximum value of maxpacket supported by driver, and is set in driver probe. This value should be used by autoconfig() function, because value of field "maxpacket" is set to value from endpoint descriptor when endpoint becomes enabled. So when autoconfig() function will be called again for this endpoint, "maxpacket" value will contain wMaxPacketSize from descriptior instead of maximum packet size for this endpoint. For this reason this patch adds new field "maxpacket_limit" which contains value of maximum packet size (which defines maximum endpoint capabilities). This value is used in ep_matches() function used by autoconfig(). Value of "maxpacket_limit" should be set in UDC driver probe function, using usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function set choosen value to both "maxpacket_limit" and "maxpacket" fields. This patch modifies UDC drivers by adding support for maxpacket_limit. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: f_fs: fix sparse warningFelipe Balbi1-1/+1
use NULL when returning NULL pointers, not 0. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: add configfs supportAndrzej Pietrasiewicz3-1/+94
Add support for using FunctionFS in configfs-based USB gadgets. [ balbi@ti.com : removed redefinition of VERBOSE_DEBUG and few trailing whitespaces ] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: Remove compatibility layerAndrzej Pietrasiewicz2-116/+0
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: g_ffs: convert to new interface of f_fsAndrzej Pietrasiewicz2-56/+96
Prepare for configfs integration. Use the new interface so that f_fs can be made a module. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: convert to new function interface with backward ↵Andrzej Pietrasiewicz5-209/+433
compatibility This is required in order to integrate configfs support. f_fs needs to be a separately compiled module and so it needs to use the new interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: add devices management codeAndrzej Pietrasiewicz3-123/+314
This will be required in order to use the new function interface (usb_get_function_instance/usb_put_function_instance) Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyunmgin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: create utility fileAndrzej Pietrasiewicz3-13/+35
A header file to be used by f_fs.c and g_ffs.c will be required when f_fs.c is converted into a module. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: Remove VLAIS usage from gadget codeAndrzej Pietrasiewicz1-40/+76
The use of variable length arrays in structs (VLAIS) in the Linux Kernel code precludes the use of compilers which don't implement VLAIS (for instance the Clang compiler). This alternate patch calculates offsets into the kmalloc-ed memory buffer using macros. The previous patch required multiple kmalloc and kfree calls. This version uses "group" vs "struct" since it really is not a struct and is essentially a group of VLA in a common allocated block. This version also fixes the issues pointed out by Andrzej Pietrasiewicz and Michal Nazarewicz. Signed-off-by: Mark Charlebois <charlebm@gmail.com> Signed-off-by: Behan Webster <behanw@converseincode.com> [elimination of miexed declaration and code, checkpatch cleanup] [fixes after Michal's review] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: rndis: merge u_rndis.ko with usb_f_rndis.koAndrzej Pietrasiewicz5-16/+26
The rndis function's users use only the new interface, so the two modules can be merged. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: f_rndis: remove compatibility layerAndrzej Pietrasiewicz2-107/+1
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: g_ffs: convert to new interface of f_rndisAndrzej Pietrasiewicz2-40/+66
There is a new interface of f_rndis and g_ffs is the last to use the old one. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: f_subset: remove compatibility layerAndrzej Pietrasiewicz2-62/+1
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: g_ffs: convert to new interface of f_subsetAndrzej Pietrasiewicz2-22/+48
There is a new function interface of f_subset and g_ffs is the last to use the old one. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: f_ecm: remove compatibility layerAndrzej Pietrasiewicz2-74/+1
There are no old function interface users left, so the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmim Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: g_ffs: convert to new interface of f_ecmAndrzej Pietrasiewicz2-14/+80
There is a new funtion interface and g_ffs is the last gadget to use the old. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: g_ffs: remove a reduntant gfs_ether_setup variableAndrzej Pietrasiewicz1-8/+5
Since d6a0143985489e470a118605352f4b18df0ce142 usb: gadget: move the global the_dev variable to their users "the_dev" variable can be used as a "setup done" flag; non-NULL meaning "setup done", NULL meaning "setup not done". Moreover, gether_cleanup() can be safely called with a NULL argument. Corrected a comment to be consistent with the code. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: configfs: allow setting function instance's nameAndrzej Pietrasiewicz1-0/+7
USB function's configfs config group is created in a generic way in usb/gadget/configfs.c:function_make(), which in turn delegates actual allocation and setup of the USB function instance to a particular implementation, e.g. in f_acm.c. The said implementation does its job in a parameter-less function e.g. acm_alloc_instance(), which results in creating an unnamed config group, whose name is set later in function_make(). function_make() creates the name by parsing a string of the form: <function name>.<instance name> which comes from userspace as a parameter to mkdir invocation. Up to now only <function name> has been used, while <instance name> has been ignored. This patch adds a set_inst_name() operation to struct usb_function_instance which allows passing the <instance name> from function_make() so that it is not ignored. It is entirely up to the implementor of set_inst_name() what to do with the <instance name>. In a typical case, the struct usb_function_instance is embedded in a larger struct which is retrieved in set_inst_name() with container_of(), and the larger struct contains a field to store the <instance name>. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: s3c-hsotg: add flush TX FIFO when kill all requestsRobert Baldyga1-0/+3
This patch adds flushing TX FIFO in kill_all_requests() function in dedicated-fifo mode. It's because when requests are killed (when endpoint is disabled or in case of device reset/disconnection) in FIFO can stay some unsent data. In the worst case FIFO can stay full, and then if endpoint will be back enabled, sending new data will be impossible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: s3c-hsotg: fix maxpacket size in s3c_hsotg_irq_enumdoneRobert Baldyga1-2/+2
This patch set maximum possible maxpacket value for each speed. Previous values didn't allow to use maxpacket sizes greater than 64 in full speed and 512 in high speed, although hardware is able to handle up to 1023 in fs and 1024 in hs. Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-10usb: f_fs: check quirk to pad epout buf size when not aligned to maxpacketsizeMichal Nazarewicz1-4/+19
Check gadget.quirk_ep_out_aligned_size to decide if buffer size requires to be aligned to maxpacketsize of an out endpoint. ffs_epfile_io() needs to pad epout buffer to match above condition if quirk is found. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-10usb: gadget: f_fs: remove loop from I/O functionMichal Nazarewicz1-54/+40
When endpoint changes (due to it being disabled or alt setting changed), mimic the action as if the change happened after the request has been queued, instead of retrying with the new endpoint. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06usb: gadget: amd5536udc: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06usb: gadget: pch_udc: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-30 01:08:47 +0300