summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3/mtu3_plat.c
AgeCommit message (Collapse)AuthorFilesLines
2018-04-22usb: mtu3: simplify getting .drvdataWolfram Sang1-4/+2
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPsChunfeng Yun1-3/+5
The old way of usb wakeup only supports platform with single SSUSB IP, such as mt8173, but mt2712 has two SSUSB IPs, so rebuild its flow and also supports the new glue layer of usb wakeup on mt2712 which is different from mt8173. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09usb: mtu3: fix error code for getting extcon deviceChunfeng Yun1-1/+1
When failing to get extcon device, extcon_get_edev_by_phandle() may return different error codes, but not only -EPROBE_DEFER, so can't always return -EPROBE_DEFER, and fix it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: mtu3: Remove redundant license textGreg Kroah-Hartman1-10/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19usb: mtu3: set invalid dr_mode as dual-role modeChunfeng Yun1-4/+2
Treat dr_mode of USB_DR_MODE_UNKNOWN as USB_DR_MODE_OTG to enhance functional robustness. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: get optional vbus for host only modeChunfeng Yun1-4/+4
When dr_mode is set as USB_DR_MODE_HOST, it's better to try to get optional vbus, this can increase flexibility, although we can set vbus as always on for regulator or put it in host driver to turn it on. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD switchChunfeng Yun1-35/+3
In order to keep manual DRD switch independent on IDDIG interrupt, make use of FORCE/RG_IDDIG instead of IDDIG EINT interrupt to implement manual DRD switch function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: add optional mcu and dma bus clocksChunfeng Yun1-40/+81
There are mcu_bus and dma_bus clocks needed to be turned on/off by driver on some SoCs, so add them as optional ones Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support option to disable usb3 portsChunfeng Yun1-2/+6
Add support to disable specific usb3 ports, it's useful when usb3 phy is shared with PCIe or SATA, because we should disable the corresponding usb3 port if the phy is used by PCIe or SATA. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-15usb: mtu3: add generic compatible stringChunfeng Yun1-0/+1
The mtu3 driver is a generic driver for MediaTek usb3 DRD IP, add a generic compatible to avoid confusion when support new SoCs but use a compatible with specific SoC's name "mt8173". Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-13usb: mtu3: Handle return value of clk_prepare_enableArvind Yadav1-3/+20
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()Wei Yongjun1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-08usb: mtu3: make the reference clock optionalChunfeng Yun1-2/+9
Make the reference clock optional for DTS backward compatibility and ignore the error if it does not exist. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: mtu3: add reference clockChunfeng Yun1-2/+19
usually, the reference clock comes from 26M oscillator directly, but some SoCs are not, add it for compatibility. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: mtu3: get resources that cause deferred probe earlierChunfeng Yun1-12/+12
Some resources such as regulator, clock usually cause deferred probe, get them earlier to avoid more ineffective processing. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: dual-role mode supportChunfeng Yun1-4/+82
support dual-role mode; there are two ways to switch between host and device modes, one is by idpin, another is by debugfs which depends on user input. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: host only mode supportChunfeng Yun1-67/+222
supports host only mode and the code is ported from host/xhci-mtk.c IPPC register shared between host and device is moved into common glue layer. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: Add MediaTek USB3 DRD driverChunfeng Yun1-0/+251
This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-01 07:07:49 +0300