| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit ba883de971d1ad018f3083d9195b8abe54d87407 ]
This function only calls mtk_otg_switch_init() when the ->port_mode
is MUSB_OTG so the clean up code should only call mtk_otg_switch_exit()
for that mode.
Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y8/3TqpqiSr0RxFH@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Before calling platform_get_resource() in omap2430_probe(), the 'ret' is
re-assgined to 0, it can't return an error code, if platform_get_resource
fails. Set the error code to -EINVAL to fix this.
Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221230081730.1655616-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The checks for musb->xceiv and musb->xceiv->set_power duplicate those in
usb_phy_set_power(), so there is no need of them. Moreover, not calling
usb_phy_set_power() results in usb_phy_set_charger_current() not being
called, so current USB config max current is not propagated through USB
charger framework and charger drivers may try to draw more current than
allowed or possible.
Fix that by removing those extra checks and calling usb_phy_set_power()
directly.
Tested on Motorola Droid4 and Nokia N900
Fixes: a9081a008f84 ("usb: phy: Add USB charger support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The am35x glue layer is no longer in use and can be dropped. There are no
longer any SoCs passing platform data for it as they are booting using
devicetree.
In general, the am35x SoCs are similar to am335x and ti81xx and can
use the musb_dsps glue layer as long as there is a proper phy driver
available.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221125085506.38127-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Probe for omap2430 glue layer is now broken for interrupt resources in
all cases.
Commit 239071064732 ("partially Revert "usb: musb: Set the DT node on the
child device"") broke probing for SoCs using ti-sysc interconnect target
module as the dt node is not found.
Commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from
DT core") caused omap3 to fail with error "-ENXIO: IRQ mc not found" as
the IRQ resources are no longer automatically populated from devicetree.
Let's fix the issues by calling device_set_of_node_from_dev() only if the
SoC has been updated to probe with ti-sysc. And for legacy SoCs, let's
populate the resources manually as needed.
Note that once we have updated the SoCs to probe with proper devicetree
data in all cases, this is no longer needed. But doing that requires
patching both devicetree and SoC code, so let's fix the probe issues first.
Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Fixes: 239071064732 ("partially Revert "usb: musb: Set the DT node on the child device"")
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Reported-by: Sicelo Mhlongo <absicsz@gmail.com>
Tested-by: Sicelo Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221118102532.34458-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Support PHYs implemented using the generic PHY framework instead of the
deprecated USB-PHY framework.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-7-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The jz4740-musb driver does not really support OTG, so it has no reason
to disable external hubs, especially since it's a system-wide setting
and we don't want external hubs to be disabled for other USB host
controllers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-6-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When musb->xceiv is not provided but musb->phy is, support setting the
OTG mode (host, peripheral) using the generic PHY framework.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modify the core so that musb->xceiv is never deferenced without being
checked first.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-4-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The musb_otg_state_string() simply calls usb_otg_state_string().
This will make it easier to get rid of the musb->xceiv dependency later.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-3-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of manipulating musb->xceiv->otg->state directly, use the newly
introduced musb_get_state() and musb_set_state() inline functions.
Later, these inline functions will be modified to get rid of the
musb->xceiv dependency, which prevents the musb code from using the
generic PHY subsystem.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 32fee1df5110 ("usb: musb: remove unused davinci support") removes
the config USB_TI_CPPI_DMA, but misses some left-over references in
drivers/usb/musb/musb_dma.h.
Remove the left-over dependent on this removed config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221031085426.17175-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The musb-davinci driver was only used on dm644x, which got removed
in linux-6.0. The only remaining davinci machines are da8xx
devicetree based and do not use this hardware.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927072616.913672-6-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927072616.913672-5-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927072616.913672-4-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927072616.913672-3-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927072616.913672-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because
of an older issue with the depencency.
It is not necessary to forbid NOP_USB_XCEIV=y in combination with
USB_MUSB_HDRC=m, but only the reverse, which causes the link failure
from the original Kconfig change.
Use the correct dependency to still allow NOP_USB_XCEIV=n or
NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m
to fix the multi_v7_defconfig for tusb.
Fixes: ab37a7a890c1 ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in")
Fixes: c0442479652b ("usb: musb: Fix randconfig build issues for Kconfig options")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220818135737.3143895-10-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
|
|
Delete the redundant word 'mode'.
Delete the redundant word 'than'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220716134457.46535-1-yuanjilin@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/20220705224750.532345354@goodmis.org
Cc: Bin Liu <b-liu@ti.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
clock source is prepared and enabled by clk_prepare_enable()
in probe function, but no disable or unprepare in remove.
Fixes: 7a96b6ea90a4 ("usb: musb: Add support for PolarFire SoC's musb controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220628140527.1404439-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These error paths return success but they need to return a negative
error code.
Fixes: 7a96b6ea90a4 ("usb: musb: Add support for PolarFire SoC's musb controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YrVmLEc/FOEzNdzj@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In musb_{save|restore}_context() the expression '&musb->endpoints[i]' just
cannot be NULL, so the checks have no sense at all -- after dropping them,
the local variables 'hw_ep' are no longer necessary, so drop them as well.
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/3f8f60d9-f1b5-6b2c-1222-39b156151a22@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for Microchips's PolarFire SoC's musb controller in host,
peripheral and otg mode.
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220613114642.1615292-2-conor.dooley@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In musb_remove() cancel_delayed_work_sync(&musb->irq_work)
is called which flush the irq_work work queue.
After cancel delayed work, musb_remove() call
musb_gadget_cleanup->usb_del_gadget_udc->usb_del_gadget
->usb_gadget_remove_driver->usb_gadget_udc_stop->udc
->gadget->ops->udc_stop(udc->gadget);
Where musb_gadget_stop() call "schedule_delayed_work(&musb->irq_work, 0)”
which is already cancel/flush.
So remove the schedule_delayed_work(&musb->irq_work, 0);
from musb_gadget_stop function.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/YqDnxkWZV2KfZh5q@Sauravs-MacBook-Air.local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver uses three clocks and there's no special handling, they're
either enabled or disabled sequentially: migrate to the clk_bulk API
to simplify clock handling.
This patch brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220404145558.93340-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 8934d3e4d0e7 ("usb: musb: omap2430: Don't use omap_get_control_dev()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220309111033.24487-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts the omap2430 changes of
commit cf081d009c44 ("usb: musb: Set the DT node on the child device")
Since v5.17-rc1, musb is broken on the gta04 and openpandora devices
(omap3530/dm3730). BeagleBone Black (am335x) seems to work.
Symptoms of this bug are
a) main symptom
[ 21.336517] using random host ethernet address
[ 21.341430] using host ethernet address: 32:70:05:18:ff:78
[ 21.341461] using self ethernet address: 46:10:3a:b3:af:d9
[ 21.358184] usb0: HOST MAC 32:70:05:18:ff:78
[ 21.376678] usb0: MAC 46:10:3a:b3:af:d9
[ 21.388305] using random self ethernet address
[ 21.393371] using random host ethernet address
[ 21.398162] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 21.421081] g_ether gadget: g_ether ready
[ 21.492156] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.691345] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.803192] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.819427] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.124450] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.168518] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.179382] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.213592] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.221832] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.227905] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.239440] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.401000] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.407073] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.426361] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.734466] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.742462] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.750396] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
... (repeats with high frequency)
This stops if the USB cable is unplugged and restarts if it is plugged in again.
b) also found in the log
[ 6.498107] ------------[ cut here ]------------
[ 6.502960] WARNING: CPU: 0 PID: 868 at arch/arm/mach-omap2/omap_hwmod.c:1885 _enable+0x50/0x234
[ 6.512207] omap_hwmod: usb_otg_hs: enabled state can only be entered from initialized, idle, or disabled state
[ 6.522766] Modules linked in: omap2430(+) bmp280_i2c bmp280 itg3200 at24 tsc2007 leds_tca6507 bma180 hmc5843_i2c hmc5843_core industrialio_triggered_buffer lis3lv02d_i2c kfifo_buf lis3lv02d phy_twl4030_usb snd_soc_omap_mcbsp snd_soc_ti_sdma musb_hdrc snd_soc_twl4030 gnss_sirf twl4030_vibra twl4030_madc twl4030_charger twl4030_pwrbutton gnss industrialio ehci_omap omapdrm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks cec
[ 6.566436] CPU: 0 PID: 868 Comm: udevd Not tainted 5.16.0-rc5-letux+ #8251
[ 6.573730] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 6.580322] [<c010ed30>] (unwind_backtrace) from [<c010a1d0>] (show_stack+0x10/0x14)
[ 6.588470] [<c010a1d0>] (show_stack) from [<c0897c14>] (dump_stack_lvl+0x40/0x4c)
[ 6.596405] [<c0897c14>] (dump_stack_lvl) from [<c0130cc4>] (__warn+0xb4/0xdc)
[ 6.604003] [<c0130cc4>] (__warn) from [<c0130d5c>] (warn_slowpath_fmt+0x70/0x9c)
[ 6.611846] [<c0130d5c>] (warn_slowpath_fmt) from [<c011f4d4>] (_enable+0x50/0x234)
[ 6.619903] [<c011f4d4>] (_enable) from [<c012081c>] (omap_hwmod_enable+0x28/0x40)
[ 6.627838] [<c012081c>] (omap_hwmod_enable) from [<c0120ff4>] (omap_device_enable+0x4c/0x78)
[ 6.636779] [<c0120ff4>] (omap_device_enable) from [<c0121030>] (_od_runtime_resume+0x10/0x3c)
[ 6.645812] [<c0121030>] (_od_runtime_resume) from [<c05c688c>] (__rpm_callback+0x3c/0xf4)
[ 6.654510] [<c05c688c>] (__rpm_callback) from [<c05c6994>] (rpm_callback+0x50/0x54)
[ 6.662628] [<c05c6994>] (rpm_callback) from [<c05c66b0>] (rpm_resume+0x448/0x4e4)
[ 6.670593] [<c05c66b0>] (rpm_resume) from [<c05c6784>] (__pm_runtime_resume+0x38/0x50)
[ 6.678985] [<c05c6784>] (__pm_runtime_resume) from [<bf14ab20>] (musb_init_controller+0x350/0xa5c [musb_hdrc])
[ 6.689727] [<bf14ab20>] (musb_init_controller [musb_hdrc]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.699737] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.708068] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.716827] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.726226] [<c05bb084>] (driver_probe_device) from [<c05bb3d0>] (__device_attach_driver+0x94/0xb4)
[ 6.735717] [<c05bb3d0>] (__device_attach_driver) from [<c05b93f8>] (bus_for_each_drv+0xa0/0xb4)
[ 6.744934] [<c05b93f8>] (bus_for_each_drv) from [<c05bb248>] (__device_attach+0xc0/0x134)
[ 6.753631] [<c05bb248>] (__device_attach) from [<c05b9fcc>] (bus_probe_device+0x28/0x80)
[ 6.762207] [<c05b9fcc>] (bus_probe_device) from [<c05b7e40>] (device_add+0x5fc/0x788)
[ 6.770507] [<c05b7e40>] (device_add) from [<c05bd240>] (platform_device_add+0x70/0x1bc)
[ 6.779022] [<c05bd240>] (platform_device_add) from [<bf177830>] (omap2430_probe+0x260/0x2d4 [omap2430])
[ 6.789001] [<bf177830>] (omap2430_probe [omap2430]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.798309] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.806610] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.815399] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.824798] [<c05bb084>] (driver_probe_device) from [<c05bb4b4>] (__driver_attach+0xc4/0xd8)
[ 6.833648] [<c05bb4b4>] (__driver_attach) from [<c05b9308>] (bus_for_each_dev+0x64/0xa0)
[ 6.842224] [<c05b9308>] (bus_for_each_dev) from [<c05ba248>] (bus_add_driver+0x148/0x1a4)
[ 6.850891] [<c05ba248>] (bus_add_driver) from [<c05bbd1c>] (driver_register+0xb4/0xf8)
[ 6.859313] [<c05bbd1c>] (driver_register) from [<c0101f54>] (do_one_initcall+0x90/0x1c8)
[ 6.867889] [<c0101f54>] (do_one_initcall) from [<c0893968>] (do_init_module+0x4c/0x204)
[ 6.876373] [<c0893968>] (do_init_module) from [<c01b4c30>] (load_module+0x13f0/0x1928)
[ 6.884796] [<c01b4c30>] (load_module) from [<c01b53a0>] (sys_finit_module+0xa0/0xc0)
[ 6.893005] [<c01b53a0>] (sys_finit_module) from [<c0100080>] (ret_fast_syscall+0x0/0x54)
[ 6.901580] Exception stack(0xc2807fa8 to 0xc2807ff0)
[ 6.906890] 7fa0: b6e517d4 00052068 00000006 b6e509f8 00000000 b6e5131c
[ 6.915466] 7fc0: b6e517d4 00052068 cd718000 0000017b 00020000 00037f78 00050048 00063368
[ 6.924011] 7fe0: bed8fef0 bed8fee0 b6e4ac4b b6f55a42
[ 6.929321] ---[ end trace d715ff121b58763c ]---
c) git bisect result on testing for "musb-hdrc" in the console log:
cf081d009c447647c6b36aced535ca427dbebe72 is the first bad commit
commit cf081d009c447647c6b36aced535ca427dbebe72
Author: Rob Herring <robh@kernel.org>
Date: Wed Dec 15 17:07:57 2021 -0600
usb: musb: Set the DT node on the child device
The musb glue drivers just copy the glue resources to the musb child device.
Instead, set the musb child device's DT node pointer to the parent device's
node so that platform_get_irq_byname() can find the resources in the DT.
This removes the need for statically populating the IRQ resources from the
DT which has been deprecated for some time.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215230756.2009115-3-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/musb/am35x.c | 2 ++
drivers/usb/musb/da8xx.c | 2 ++
drivers/usb/musb/jz4740.c | 1 +
drivers/usb/musb/mediatek.c | 2 ++
drivers/usb/musb/omap2430.c | 1 +
drivers/usb/musb/ux500.c | 1 +
6 files changed, 9 insertions(+)
Reverting this patch makes musb work again as before.
Fixes: cf081d009c44 ("usb: musb: Set the DT node on the child device")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/f62f5fc11f9ecae7e57f3fd66939e051bd3b11fc.1646744166.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211220010411.12075-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The musb glue drivers just copy the glue resources to the musb child device.
Instead, set the musb child device's DT node pointer to the parent device's
node so that platform_get_irq_byname() can find the resources in the DT.
This removes the need for statically populating the IRQ resources from the
DT which has been deprecated for some time.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215230756.2009115-3-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The platform device resources are copied by the driver core, so there is
no need for the caller to do it when creating a platform device. Just pass
the parent resources to the child device directly.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215230756.2009115-2-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
musb_gadget_queue() adds the passed request to musb_ep::req_list. If the
endpoint is idle and it is the first request then it invokes
musb_queue_resume_work(). If the function returns an error then the
error is passed to the caller without any clean-up and the request
remains enqueued on the list. If the caller enqueues the request again
then the list corrupts.
Remove the request from the list on error.
Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Viraj Shah <viraj.shah@linutronix.de>
Link: https://lore.kernel.org/r/20211021093644.4734-1-viraj.shah@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error message appears during suspend, where musb driver is storing
the register state in musb_save_context():
```
musb-sunxi 1c19000.usb: Error unknown readb offset 112
```
Print warning instead to avoid confusion.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Link: https://lore.kernel.org/r/20211019131244.1568560-1-r.stratiienko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the usb fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after
initializing musb") has inverted the calls to
dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without
updating correctly the error path. dsps_create_musb_pdev() allocates and
registers a new platform device which must be unregistered and freed
with platform_device_unregister(), and this is missing upon
dsps_setup_optional_vbus_irq() error.
While on the master branch it seems not to trigger any issue, I observed
a kernel crash because of a NULL pointer dereference with a v5.10.70
stable kernel where the patch mentioned above was backported. With this
kernel version, -EPROBE_DEFER is returned the first time
dsps_setup_optional_vbus_irq() is called which triggers the probe to
error out without unregistering the platform device. Unfortunately, on
the Beagle Bone Black Wireless, the platform device still living in the
system is being used by the USB Ethernet gadget driver, which during the
boot phase triggers the crash.
My limited knowledge of the musb world prevents me to revert this commit
which was sent to silence a robot warning which, as far as I understand,
does not make sense. The goal of this patch was to prevent an IRQ to
fire before the platform device being registered. I think this cannot
ever happen due to the fact that enabling the interrupts is done by the
->enable() callback of the platform musb device, and this platform
device must be already registered in order for the core or any other
user to use this callback.
Hence, I decided to fix the error path, which might prevent future
errors on mainline kernels while also fixing older ones.
Fixes: 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20211005221631.1529448-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kconfig symbol GENERIC_PHY says:
All the users of this framework should select this config.
and around 136 out of 138 drivers do so, so change USB_MUSB_MEDIATEK
to do so also.
This (also) fixes a long circular dependency problem for an upcoming
patch.
Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Cc: Bin Liu <b-liu@ti.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: Yonglong Wu <yonglong.wu@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211005235747.5588-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel(). The last byte is always going to be
garbage. Zero out the last bytes instead.
Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The allow_userspace_control flag enables manual role-switch from userspace.
Turn this feature on like several other USB DRD controller drivers.
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Link: https://lore.kernel.org/r/20210830155903.13907-3-mans0n@gorani.run
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If IRQ occurs between calling dsps_setup_optional_vbus_irq()
and dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.
The patch puts initializing of neccesery data before registration
of the interrupt handler.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As the USB PHYs typically are on I2C or SPI bus for the 2430 glue layer,
we need configure the PHYs early for suspend.
The musb glue layer we need to suspend only after musb_suspend() in
suspend_late.
Fixes: 62d472d8ad88 ("usb: musb: Add missing PM suspend and resume functions for 2430 glue")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727104134.52800-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The devctl register on musb is the only way to get state information
on musb. The hardware can easily get confused because it tries to do
things on it's own automagically, and things like slow VBUS rise can
make things fail.
Let's make it easier to debug the ongoing state change issues that
keep popping up on regular basis and add tracing support.
With these changes we can easily trace musb state change events with:
echo 1 > /sys/kernel/debug/tracing/events/musb/musb_state/enable
cat /sys/kernel/debug/tracing/trace_pipe
echo 0 > /sys/kernel/debug/tracing/events/musb/musb_state/enable
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Bhushan Shah <bshah@kde.org>
Cc: Drew Fustini <drew@beagleboard.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210604080536.12185-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify cable state handling a bit to leave out duplicated code.
We are just scheduling work and showing state info if a recheck is
needed. No intended functional changes.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Bhushan Shah <bshah@kde.org>
Cc: Drew Fustini <drew@beagleboard.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210604080536.12185-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the usb fixes in here as well, and this resolves some merge
issues with:
drivers/usb/dwc3/debugfs.c
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.
This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:
$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms
Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.
Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:
$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms
Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64")
Cc: stable@vger.kernel.org
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On start-up, we can get a spurious session request interrupt with nothing
connected. After that the devctl session bit will silently clear, but the
musb hardware is never idled until a cable is plugged in, or the glue
layer module is reloaded.
Let's just check the session bit again in 3 seconds in peripheral mode
to catch the issue.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210518150615.53464-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
