summaryrefslogtreecommitdiff
path: root/drivers/vfio
AgeCommit message (Collapse)AuthorFilesLines
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds1-56/+9
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-16Merge tag 'vfio-v4.19-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-1/+15
Pull VFIO updates from Alex Williamson: - mark switch fall-through cases (Gustavo A. R. Silva) - disable binding SR-IOV enabled PFs (Alex Williamson) * tag 'vfio-v4.19-rc1' of git://github.com/awilliam/linux-vfio: vfio-pci: Disable binding to PFs with SR-IOV enabled vfio: Mark expected switch fall-throughs
2018-08-16Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-08-13Merge branch 'fixes' into nextMichael Ellerman1-5/+5
Merge our fixes branch from the 4.18 cycle to resolve some minor conflicts.
2018-08-06vfio-pci: Disable binding to PFs with SR-IOV enabledAlex Williamson1-0/+13
We expect to receive PFs with SR-IOV disabled, however some host drivers leave SR-IOV enabled at unbind. This puts us in a state where we can potentially assign both the PF and the VF, leading to both functionality as well as security concerns due to lack of managing the SR-IOV state as well as vendor dependent isolation from the PF to VF. If we were to attempt to actively disable SR-IOV on driver probe, we risk VF bound drivers blocking, potentially risking live lock scenarios. Therefore simply refuse to bind to PFs with SR-IOV enabled with a warning message indicating the issue. Users can resolve this by re-binding to the host driver and disabling SR-IOV before attempting to use the device with vfio-pci. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-06vfio: Mark expected switch fall-throughsGustavo A. R. Silva2-1/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-22Merge tag 'powerpc-4.18-4' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two regression fixes, one for xmon disassembly formatting and the other to fix the E500 build. Two commits to fix a potential security issue in the VFIO code under obscure circumstances. And finally a fix to the Power9 idle code to restore SPRG3, which is user visible and used for sched_getcpu(). Thanks to: Alexey Kardashevskiy, David Gibson. Gautham R. Shenoy, James Clarke" * tag 'powerpc-4.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle) powerpc/Makefile: Assemble with -me500 when building for E500 KVM: PPC: Check if IOMMU page is contained in the pinned physical page vfio/spapr: Use IOMMU pageshift rather than pagesize powerpc/xmon: Fix disassembly since printf changes
2018-07-20PCI: Rename pci_try_reset_bus() to pci_reset_bus()Sinan Kaya1-2/+2
Now that the old implementation of pci_reset_bus() is gone, replace pci_try_reset_bus() with pci_reset_bus(). Compared to the old implementation, new code will fail immmediately with -EAGAIN if object lock cannot be obtained. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI: Unify try slot and bus reset APISinan Kaya1-4/+2
Drivers are expected to call pci_try_reset_slot() or pci_try_reset_bus() by querying if a system supports hotplug or not. A survey showed that most drivers don't do this and we are leaking hotplug capability to the user. Hide pci_try_slot_reset() from drivers and embed into pci_try_bus_reset(). Change pci_try_reset_bus() parameter from struct pci_bus to struct pci_dev. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-18vfio/pci: Fix potential Spectre v1Gustavo A. R. Silva1-0/+4
info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-18KVM: PPC: Check if IOMMU page is contained in the pinned physical pageAlexey Kardashevskiy1-1/+1
A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-18vfio/spapr: Use IOMMU pageshift rather than pagesizeAlexey Kardashevskiy1-4/+4
The size is always equal to 1 page so let's use this. Later on this will be used for other checks which use page shifts to check the granularity of access. This should cause no behavioral change. Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-16powerpc/powernv/ioda: Allocate indirect TCE levels on demandAlexey Kardashevskiy1-1/+1
At the moment we allocate the entire TCE table, twice (hardware part and userspace translation cache). This normally works as we normally have contigous memory and the guest will map entire RAM for 64bit DMA. However if we have sparse RAM (one example is a memory device), then we will allocate TCEs which will never be used as the guest only maps actual memory for DMA. If it is a single level TCE table, there is nothing we can really do but if it a multilevel table, we can skip allocating TCEs we know we won't need. This adds ability to allocate only first level, saving memory. This changes iommu_table::free() to avoid allocating of an extra level; iommu_table::set() will do this when needed. This adds @alloc parameter to iommu_table::exchange() to tell the callback if it can allocate an extra level; the flag is set to "false" for the realmode KVM handlers of H_PUT_TCE hcalls and the callback returns H_TOO_HARD. This still requires the entire table to be counted in mm::locked_vm. To be conservative, this only does on-demand allocation when the usespace cache table is requested which is the case of VFIO. The example math for a system replicating a powernv setup with NVLink2 in a guest: 16GB RAM mapped at 0x0 128GB GPU RAM window (16GB of actual RAM) mapped at 0x244000000000 the table to cover that all with 64K pages takes: (((0x244000000000 + 0x2000000000) >> 16)*8)>>20 = 4556MB If we allocate only necessary TCE levels, we will only need: (((0x400000000 + 0x400000000) >> 16)*8)>>20 = 4MB (plus some for indirect levels). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-16powerpc/powernv: Add indirect levels to it_userspaceAlexey Kardashevskiy1-46/+0
We want to support sparse memory and therefore huge chunks of DMA windows do not need to be mapped. If a DMA window big enough to require 2 or more indirect levels, and a DMA window is used to map all RAM (which is a default case for 64bit window), we can actually save some memory by not allocation TCE for regions which we are not going to map anyway. The hardware tables alreary support indirect levels but we also keep host-physical-to-userspace translation array which is allocated by vmalloc() and is a flat array which might use quite some memory. This converts it_userspace from vmalloc'ed array to a multi level table. As the format becomes platform dependend, this replaces the direct access to it_usespace with a iommu_table_ops::useraddrptr hook which returns a pointer to the userspace copy of a TCE; future extension will return NULL if the level was not allocated. This should not change non-KVM handling of TCE tables and it_userspace will not be allocated for non-KVM tables. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-16KVM: PPC: Make iommu_table::it_userspace big endianAlexey Kardashevskiy1-10/+9
We are going to reuse multilevel TCE code for the userspace copy of the TCE table and since it is big endian, let's make the copy big endian too. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-30vfio: Use get_user_pages_longterm correctlyJason Gunthorpe1-9/+7
The patch noted in the fixes below converted get_user_pages_fast() to get_user_pages_longterm(), however the two calls differ in a few ways. First _fast() is documented to not require the mmap_sem, while _longterm() is documented to need it. Hold the mmap sem as required. Second, _fast accepts an 'int write' while _longterm uses 'unsigned int gup_flags', so the expression '!!(prot & IOMMU_WRITE)' is only working by luck as FOLL_WRITE is currently == 0x1. Use the expected FOLL_WRITE constant instead. Fixes: 94db151dc892 ("vfio: disable filesystem-dax page pinning") Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-19vfio/pci: Make IGD support a configurable optionAlex Williamson1-2/+10
Allow the code which provides extensions to support direct assignment of Intel IGD (GVT-d) to be compiled out of the kernel if desired. The config option for this was previously automatically enabled on X86, therefore the default remains Y. This simply provides the option to disable it even for X86. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-12Merge tag 'vfio-v4.18-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds6-116/+116
Pull VFIO updates from Alex Williamson: - Bind type1 task tracking to group_leader to facilitate vCPU hotplug in QEMU (Alex Williamson) - Sample mdev display drivers, including region-based host and guest Linux drivers and bochs compatible dmabuf device (Gerd Hoffmann) - Fix vfio-platform reset module leak (Geert Uytterhoeven) - vfio-platform error message consistency (Geert Uytterhoeven) - Global checking for mdev uuid collisions rather than per parent device (Alex Williamson) - Use match_string() helper (Yisheng Xie) - vfio-platform PM domain fixes (Geert Uytterhoeven) - Fix sample mbochs driver build dependency (Arnd Bergmann) * tag 'vfio-v4.18-rc1' of git://github.com/awilliam/linux-vfio: samples: mbochs: add DMA_SHARED_BUFFER dependency vfio: platform: Fix using devices in PM Domains vfio: use match_string() helper vfio/mdev: Re-order sysfs attribute creation vfio/mdev: Check globally for duplicate devices vfio: platform: Make printed error messages more consistent vfio: platform: Fix reset module leak in error path sample: vfio bochs vbe display (host device for bochs-drm) sample: vfio mdev display - guest driver sample: vfio mdev display - host device vfio/type1: Fix task tracking for QEMU vCPU hotplug
2018-06-08vfio: platform: Fix using devices in PM DomainsGeert Uytterhoeven1-0/+10
If a device is part of a PM Domain (e.g. power and/or clock domain), its power state is managed using Runtime PM. Without Runtime PM, the device may not be powered up or clocked, causing subtle failures, crashes, or system lock-ups when the device is accessed by the guest. Fix this by adding Runtime PM support, powering the device when the VFIO device is opened by the guest. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08vfio: use match_string() helperYisheng Xie1-8/+3
match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: kvm@vger.kernel.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08vfio/mdev: Re-order sysfs attribute creationAlex Williamson1-7/+7
There exists a gap at the end of mdev_device_create() where the device is visible to userspace, but we're not yet ready to handle removal, as triggered through the 'remove' attribute. We handle this properly in mdev_device_remove() with an -EAGAIN return, but we can marginally reduce this gap by adding this attribute as a final step of our sysfs setup. Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08vfio/mdev: Check globally for duplicate devicesAlex Williamson2-67/+37
When we create an mdev device, we check for duplicates against the parent device and return -EEXIST if found, but the mdev device namespace is global since we'll link all devices from the bus. We do catch this later in sysfs_do_create_link_sd() to return -EEXIST, but with it comes a kernel warning and stack trace for trying to create duplicate sysfs links, which makes it an undesirable response. Therefore we should really be looking for duplicates across all mdev parent devices, or as implemented here, against our mdev device list. Using mdev_list to prevent duplicates means that we can remove mdev_parent.lock, but in order not to serialize mdev device creation and removal globally, we add mdev_device.active which allows UUIDs to be reserved such that we can drop the mdev_list_lock before the mdev device is fully in place. Two behavioral notes; first, mdev_parent.lock had the side-effect of serializing mdev create and remove ops per parent device. This was an implementation detail, not an intentional guarantee provided to the mdev vendor drivers. Vendor drivers can trivially provide this serialization internally if necessary. Second, review comments note the new -EAGAIN behavior when the device, and in particular the remove attribute, becomes visible in sysfs. If a remove is triggered prior to completion of mdev_device_create() the user will see a -EAGAIN error. While the errno is different, receiving an error during this period is not, the previous implementation returned -ENODEV for the same condition. Furthermore, the consistency to the user is improved in the case where mdev_device_remove_ops() returns error. Previously concurrent calls to mdev_device_remove() could see the device disappear with -ENODEV and return in the case of error. Now a user would see -EAGAIN while the device is in this transitory state. Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08vfio: platform: Make printed error messages more consistentGeert Uytterhoeven1-3/+2
- Capitalize the first word of error messages, - Unwrap statements that fit on a single line, - Use "VFIO" instead of "vfio" as the error message prefix. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08vfio: platform: Fix reset module leak in error pathGeert Uytterhoeven1-5/+10
If the IOMMU group setup fails, the reset module is not released. Fixes: b5add544d677d363 ("vfio, platform: make reset driver a requirement by default") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-08vfio/type1: Fix task tracking for QEMU vCPU hotplugAlex Williamson1-26/+47
MAP_DMA ioctls might be called from various threads within a process, for example when using QEMU, the vCPU threads are often generating these calls and we therefore take a reference to that vCPU task. However, QEMU also supports vCPU hotplug on some machines and the task that called MAP_DMA may have exited by the time UNMAP_DMA is called, resulting in the mm_struct pointer being NULL and thus a failure to match against the existing mapping. To resolve this, we instead take a reference to the thread group_leader, which has the same mm_struct and resource limits, but is less likely exit, at least in the QEMU case. A difficulty here is guaranteeing that the capabilities of the group_leader match that of the calling thread, which we resolve by tracking CAP_IPC_LOCK at the time of calling rather than at an indeterminate time in the future. Potentially this also results in better efficiency as this is now recorded once per MAP_DMA ioctl. Reported-by: Xu Yandong <xuyandong2@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-04Merge branch 'work.aio-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-06-02Revert "vfio/type1: Improve memory pinning process for raw PFN mapping"Alex Williamson1-15/+10
Bisection by Amadeusz Sławiński implicates this commit leading to bad page state issues after VM shutdown, likely due to unbalanced page references. The original commit was intended only as a performance improvement, therefore revert for offline rework. Link: https://lkml.org/lkml/2018/6/2/97 Fixes: 356e88ebe447 ("vfio/type1: Improve memory pinning process for raw PFN mapping") Cc: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com> Reported-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-05-26fs: add new vfs_poll and file_can_poll helpersChristoph Hellwig1-1/+1
These abstract out calls to the poll method in preparation for changes in how we poll. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-07Merge tag 'vfio-v4.17-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds4-41/+348
Pull VFIO updates from Alex Williamson: - Adopt iommu_unmap_fast() interface to type1 backend (Suravee Suthikulpanit) - mdev sample driver fixup (Shunyong Yang) - More efficient PFN mapping handling in type1 backend (Jason Cai) - VFIO device ioeventfd interface (Alex Williamson) - Tag new vfio-platform sub-maintainer (Alex Williamson) * tag 'vfio-v4.17-rc1' of git://github.com/awilliam/linux-vfio: MAINTAINERS: vfio/platform: Update sub-maintainer vfio/pci: Add ioeventfd support vfio/pci: Use endian neutral helpers vfio/pci: Pull BAR mapping setup from read-write path vfio/type1: Improve memory pinning process for raw PFN mapping vfio-mdev/samples: change RDI interrupt condition vfio/type1: Adopt fast IOTLB flush interface when unmap IOVAs
2018-03-26vfio/pci: Add ioeventfd supportAlex Williamson3-0/+165
The ioeventfd here is actually irqfd handling of an ioeventfd such as supported in KVM. A user is able to pre-program a device write to occur when the eventfd triggers. This is yet another instance of eventfd-irqfd triggering between KVM and vfio. The impetus for this is high frequency writes to pages which are virtualized in QEMU. Enabling this near-direct write path for selected registers within the virtualized page can improve performance and reduce overhead. Specifically this is initially targeted at NVIDIA graphics cards where the driver issues a write to an MMIO register within a virtualized region in order to allow the MSI interrupt to re-trigger. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-26vfio/pci: Use endian neutral helpersAlex Williamson1-8/+26
The iowriteXX/ioreadXX functions assume little endian hardware and convert to little endian on a write and from little endian on a read. We currently do our own explicit conversion to negate this. Instead, add some endian dependent defines to avoid all byte swaps. There should be no functional change other than big endian systems aren't penalized with wasted swaps. Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-26vfio/pci: Pull BAR mapping setup from read-write pathAlex Williamson1-12/+27
This creates a common helper that we'll use for ioeventfd setup. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-22vfio/type1: Improve memory pinning process for raw PFN mappingJason Cai (Xiang Feng)1-10/+15
When using vfio to pass through a PCIe device (e.g. a GPU card) that has a huge BAR (e.g. 16GB), a lot of cycles are wasted on memory pinning because PFNs of PCI BAR are not backed by struct page, and the corresponding VMA has flag VM_PFNMAP. With this change, when pinning a region which is a raw PFN mapping, it can skip unnecessary user memory pinning process, and thus, can significantly improve VM's boot up time when passing through devices via VFIO. In my test on a Xeon E5 2.6GHz, the time mapping a 16GB BAR was reduced from about 0.4s to 1.5us. Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-22Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"Alex Williamson1-3/+0
This reverts commit 2170dd04316e0754cbbfa4892a25aead39d225f7 The intent of commit 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") was to disallow the user from seeing that the device supports INTx if the platform is incapable of enabling it. The detection of this case however incorrectly includes devices which natively do not support INTx, such as SR-IOV VFs, and further discussions reveal gaps even for the target use case. Reported-by: Arjun Vynipadath <arjun@chelsio.com> Fixes: 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-21vfio/type1: Adopt fast IOTLB flush interface when unmap IOVAsSuravee Suthikulpanit1-11/+115
VFIO IOMMU type1 currently upmaps IOVA pages synchronously, which requires IOTLB flushing for every unmapping. This results in large IOTLB flushing overhead when handling pass-through devices has a large number of mapped IOVAs. This can be avoided by using the new IOTLB flushing interface. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> [aw - use LIST_HEAD] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-03vfio: disable filesystem-dax page pinningDan Williams1-3/+15
Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> Reported-by: Haozhong Zhang <haozhong.zhang@intel.com> Tested-by: Haozhong Zhang <haozhong.zhang@intel.com> Fixes: d475c6346a38 ("dax,ext2: replace XIP read and write with DAX I/O") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-4/+4
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-02Merge tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds3-110/+23
Pull VFIO updates from Alex Williamson: - Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy) - Capability helper cleanup (Alex Williamson) - Allow mmaps overlapping MSI-X vector table with region capability exposing this feature (Alexey Kardashevskiy) - mdev static cleanups (Xiongwei Song) * tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio: vfio: mdev: make a couple of functions and structure vfio_mdev_driver static vfio-pci: Allow mapping MSIX BAR vfio: Simplify capability helper vfio-pci: Mask INTx if a device is not capabable of enabling it
2018-01-09vfio: mdev: make a couple of functions and structure vfio_mdev_driver staticXiongwei Song1-3/+3
The functions vfio_mdev_probe, vfio_mdev_remove and the structure vfio_mdev_driver are only used in this file, so make them static. Clean up sparse warnings: drivers/vfio/mdev/vfio_mdev.c:114:5: warning: no previous prototype for 'vfio_mdev_probe' [-Wmissing-prototypes] drivers/vfio/mdev/vfio_mdev.c:121:6: warning: no previous prototype for 'vfio_mdev_remove' [-Wmissing-prototypes] Signed-off-by: Xiongwei Song <sxwjean@gmail.com> Reviewed-by: Quan Xu <quan.xu0@gmail.com> Reviewed-by: Liu, Yi L <yi.l.liu@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-20vfio-pci: Allow mapping MSIX BARAlexey Kardashevskiy1-56/+8
By default VFIO disables mapping of MSIX BAR to the userspace as the userspace may program it in a way allowing spurious interrupts; instead the userspace uses the VFIO_DEVICE_SET_IRQS ioctl. In order to eliminate guessing from the userspace about what is mmapable, VFIO also advertises a sparse list of regions allowed to mmap. This works fine as long as the system page size equals to the MSIX alignment requirement which is 4KB. However with a bigger page size the existing code prohibits mapping non-MSIX parts of a page with MSIX structures so these parts have to be emulated via slow reads/writes on a VFIO device fd. If these emulated bits are accessed often, this has serious impact on performance. This allows mmap of the entire BAR containing MSIX vector table. This removes the sparse capability for PCI devices as it becomes useless. As the userspace needs to know for sure whether mmapping of the MSIX vector containing data can succeed, this adds a new capability - VFIO_REGION_INFO_CAP_MSIX_MAPPABLE - which explicitly tells the userspace that the entire BAR can be mmapped. This does not touch the MSIX mangling in the BAR read/write handlers as we are doing this just to enable direct access to non MSIX registers. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw - fixup whitespace, trim function name] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-20vfio: Simplify capability helperAlex Williamson2-54/+12
The vfio_info_add_capability() helper requires the caller to pass a capability ID, which it then uses to fill in header fields, assuming hard coded versions. This makes for an awkward and rigid interface. The only thing we want this helper to do is allocate sufficient space in the caps buffer and chain this capability into the list. Reduce it to that simple task. Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-20vfio-pci: Mask INTx if a device is not capabable of enabling itAlexey Kardashevskiy1-0/+3
At the moment VFIO rightfully assumes that INTx is supported if the interrupt pin is not set to zero in the device config space. However if that is not the case (the pin is not zero but pdev->irq is), vfio_intx_enable() fails. In order to prevent the userspace from trying to enable INTx when we know that it cannot work, let's mask the PCI_INTERRUPT_PIN register. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-28annotate poll-related wait keysAl Viro1-1/+1
__poll_t is also used as wait key in some waitqueues. Verify that wait_..._poll() gets __poll_t as key and provide a helper for wakeup functions to get back to that __poll_t value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28anntotate the places where ->poll() return values goAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-15Merge tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds6-3/+156
Pull VFIO updates from Alex Williamson: - Virtualize PCI MPS and MRRS registers - Avoid soft lockups on SPAPR when clearing TCE - Broadcom FlexRM platform device support - Samples driver cleanup & type1 integer overflow fix * tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfio: vfio: platform: reset: Add Broadcom FlexRM reset module vfio/type1: silence integer overflow warning vfio-mdev/samples: make mdev_fops const and static vfio/spapr: Add cond_resched() for huge updates vfio/pci: Virtualize Maximum Read Request Size vfio/pci: Virtualize Maximum Payload Size
2017-11-13Merge branches 'vfio/fixes' and 'vfio/platform' into vfio-next-20171113.0Alex Williamson3-0/+123
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar3-0/+3
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-1/+1
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-20vfio: platform: reset: Add Broadcom FlexRM reset moduleAnup Patel3-0/+123
This patch adds Broadcom FlexRM low-level reset for VFIO platform. It will do the following: 1. Disable/Deactivate each FlexRM ring 2. Flush each FlexRM ring The cleanup sequence for FlexRM rings is adapted from Broadcom FlexRM mailbox driver. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Oza Oza <oza.oza@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>