summaryrefslogtreecommitdiff
path: root/drivers/vfio
AgeCommit message (Collapse)AuthorFilesLines
2015-07-25vfio: Fix lockdep issueAlex Williamson1-37/+54
When we open a device file descriptor, we currently have the following: vfio_group_get_device_fd() mutex_lock(&group->device_lock); open() ... if (ret) release() If we hit that error case, we call the backend driver release path, which for vfio-pci looks like this: vfio_pci_release() vfio_pci_disable() vfio_pci_try_bus_reset() vfio_pci_get_devs() vfio_device_get_from_dev() vfio_group_get_device() mutex_lock(&group->device_lock); Whoops, we've stumbled back onto group.device_lock and created a deadlock. There's a low likelihood of ever seeing this play out, but obviously it needs to be fixed. To do that we can use a reference to the vfio_device for vfio_group_get_device_fd() rather than holding the lock. There was a loop in this function, theoretically allowing multiple devices with the same name, but in practice we don't expect such a thing to happen and the code is already aborting from the loop with break on any sort of error rather than continuing and only parsing the first match anyway, so the loop was effectively unused already. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Fixes: 20f300175a1e ("vfio/pci: Fix racy vfio_device_get_from_dev() call") Reported-by: Joerg Roedel <joro@8bytes.org> Tested-by: Joerg Roedel <jroedel@suse.de>
2015-06-28Merge tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds9-19/+195
Pull VFIO updates from Alex Williamson: - fix race with device reference versus driver release (Alex Williamson) - add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger) - enable vfio-platform for ARM64 (Eric Auger) - tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson) * tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio: MAINTAINERS: Add vfio-platform sub-maintainer VFIO: platform: enable ARM64 build VFIO: platform: Calxeda xgmac reset module VFIO: platform: populate the reset function on probe VFIO: platform: add reset callback VFIO: platform: add reset struct and lookup table vfio/pci: Fix racy vfio_device_get_from_dev() call
2015-06-24Merge tag 'powerpc-4.2-1' of ↵Linus Torvalds2-101/+1010
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...
2015-06-22VFIO: platform: enable ARM64 buildEric Auger1-1/+1
This patch enables building VFIO platform and derivatives on ARM64. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22VFIO: platform: Calxeda xgmac reset moduleEric Auger6-0/+107
This patch introduces a module that registers and implements a basic reset function for the Calxeda xgmac device. This latter basically disables interrupts and stops DMA transfers. The reset function code is inherited from the native calxeda xgmac driver. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22VFIO: platform: populate the reset function on probeEric Auger1-1/+36
The reset function lookup happens on vfio-platform probe. The reset module load is requested and a reference to the function symbol is hold. The reference is released on vfio-platform remove. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22VFIO: platform: add reset callbackEric Auger2-2/+14
A new reset callback is introduced. If this callback is populated, the reset is invoked on device first open/last close or upon userspace ioctl. The modality is exposed on VFIO_DEVICE_GET_INFO. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-18VFIO: platform: add reset struct and lookup tableEric Auger2-0/+9
This patch introduces the vfio_platform_reset_combo struct that stores all the information useful to handle the reset modality: compat string, name of the reset function, name of the module that implements the reset function. A lookup table of such structures is added, currently void. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-11vfio: powerpc/spapr: Support Dynamic DMA windowsAlexey Kardashevskiy1-1/+195
This adds create/remove window ioctls to create and remove DMA windows. sPAPR defines a Dynamic DMA windows capability which allows para-virtualized guests to create additional DMA windows on a PCI bus. The existing linux kernels use this new window to map the entire guest memory and switch to the direct DMA operations saving time on map/unmap requests which would normally happen in a big amounts. This adds 2 ioctl handlers - VFIO_IOMMU_SPAPR_TCE_CREATE and VFIO_IOMMU_SPAPR_TCE_REMOVE - to create and remove windows. Up to 2 windows are supported now by the hardware and by this driver. This changes VFIO_IOMMU_SPAPR_TCE_GET_INFO handler to return additional information such as a number of supported windows and maximum number levels of TCE tables. DDW is added as a capability, not as a SPAPR TCE IOMMU v2 unique feature as we still want to support v2 on platforms which cannot do DDW for the sake of TCE acceleration in KVM (coming soon). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Register memory and define IOMMU v2Alexey Kardashevskiy1-80/+421
The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership ↵Alexey Kardashevskiy1-1/+87
control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: powerpc/powernv/ioda: Define and implement DMA windows APIAlexey Kardashevskiy1-8/+11
This extends iommu_table_group_ops by a set of callbacks to support dynamic DMA windows management. create_table() creates a TCE table with specific parameters. it receives iommu_table_group to know nodeid in order to allocate TCE table memory closer to the PHB. The exact format of allocated multi-level table might be also specific to the PHB model (not the case now though). This callback calculated the DMA window offset on a PCI bus from @num and stores it in a just created table. set_window() sets the window at specified TVT index + @num on PHB. unset_window() unsets the window from specified TVT. This adds a free() callback to iommu_table_ops to free the memory (potentially a tree of tables) allocated for the TCE table. create_table() and free() are supposed to be called once per VFIO container and set_window()/unset_window() are supposed to be called for every group in a container. This adds IOMMU capabilities to iommu_table_group such as default 32bit window parameters and others. This makes use of new values in vfio_iommu_spapr_tce. IODA1/P5IOC2 do not support DDW so they do not advertise pagemasks to the userspace. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11powerpc/iommu/powernv: Release replaced TCEAlexey Kardashevskiy1-25/+38
At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership controlAlexey Kardashevskiy1-5/+65
This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11powerpc/spapr: vfio: Switch from iommu_table to new iommu_table_groupAlexey Kardashevskiy1-36/+86
So far one TCE table could only be used by one IOMMU group. However IODA2 hardware allows programming the same TCE table address to multiple PE allowing sharing tables. This replaces a single pointer to a group in a iommu_table struct with a linked list of groups which provides the way of invalidating TCE cache for every PE when an actual TCE table is updated. This adds pnv_pci_link_table_and_group() and pnv_pci_unlink_table_and_group() helpers to manage the list. However without VFIO, it is still going to be a single IOMMU group per iommu_table. This changes iommu_add_device() to add a device to a first group from the group list of a table as it is only called from the platform init code or PCI bus notifier and at these moments there is only one group per table. This does not change TCE invalidation code to loop through all attached groups in order to simplify this patch and because it is not really needed in most cases. IODA2 is fixed in a later patch. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11powerpc/spapr: vfio: Replace iommu_table with iommu_table_groupAlexey Kardashevskiy1-10/+13
Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Rework groups attachingAlexey Kardashevskiy1-16/+24
This is to make extended ownership and multiple groups support patches simpler for review. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Moving pinning/unpinning to helpersAlexey Kardashevskiy1-20/+41
This is a pretty mechanical patch to make next patches simpler. New tce_iommu_unuse_page() helper does put_page() now but it might skip that after the memory registering patch applied. As we are here, this removes unnecessary checks for a value returned by pfn_to_page() as it cannot possibly return NULL. This moves tce_iommu_disable() later to let tce_iommu_clear() know if the container has been enabled because if it has not been, then put_page() must not be called on TCEs from the TCE table. This situation is not yet possible but it will after KVM acceleration patchset is applied. This changes code to work with physical addresses rather than linear mapping addresses for better code readability. Following patches will add an xchg() callback for an IOMMU table which will accept/return physical addresses (unlike current tce_build()) which will eliminate redundant conversions. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Disable DMA mappings on disabled containerAlexey Kardashevskiy1-0/+6
At the moment DMA map/unmap requests are handled irrespective to the container's state. This allows the user space to pin memory which it might not be allowed to pin. This adds checks to MAP/UNMAP that the container is enabled, otherwise -EPERM is returned. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Move locked_vm accounting to helpersAlexey Kardashevskiy1-19/+63
There moves locked pages accounting to helpers. Later they will be reused for Dynamic DMA windows (DDW). This reworks debug messages to show the current value and the limit. This stores the locked pages number in the container so when unlocking the iommu table pointer won't be needed. This does not have an effect now but it will with the multiple tables per container as then we will allow attaching/detaching groups on fly and we may end up having a container with no group attached but with the counter incremented. While we are here, update the comment explaining why RLIMIT_MEMLOCK might be required to be bigger than the guest RAM. This also prints pid of the current process in pr_warn/pr_debug. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Use it_page_sizeAlexey Kardashevskiy1-13/+13
This makes use of the it_page_size from the iommu_table struct as page size can differ. This replaces missing IOMMU_PAGE_SHIFT macro in commented debug code as recently introduced IOMMU_PAGE_XXX macros do not include IOMMU_PAGE_SHIFT. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Check that IOMMU page is fully contained by system pageAlexey Kardashevskiy1-0/+16
This checks that the TCE table page size is not bigger that the size of a page we just pinned and going to put its physical address to the table. Otherwise the hardware gets unwanted access to physical memory between the end of the actual page and the end of the aligned up TCE page. Since compound_order() and compound_head() work correctly on non-huge pages, there is no need for additional check whether the page is huge. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Move page pinning from arch code to VFIO IOMMU driverAlexey Kardashevskiy1-13/+67
This moves page pinning (get_user_pages_fast()/put_page()) code out of the platform IOMMU code and puts it to VFIO IOMMU driver where it belongs to as the platform code does not deal with page pinning. This makes iommu_take_ownership()/iommu_release_ownership() deal with the IOMMU table bitmap only. This removes page unpinning from iommu_take_ownership() as the actual TCE table might contain garbage and doing put_page() on it is undefined behaviour. Besides the last part, the rest of the patch is mechanical. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-09vfio/pci: Fix racy vfio_device_get_from_dev() callAlex Williamson2-15/+28
Testing the driver for a PCI device is racy, it can be all but complete in the release path and still report the driver as ours. Therefore we can't trust drvdata to be valid. This race can sometimes be seen when one port of a multifunction device is being unbound from the vfio-pci driver while another function is being released by the user and attempting a bus reset. The device in the remove path is found as a dependent device for the bus reset of the release path device, the driver is still set to vfio-pci, but the drvdata has already been cleared, resulting in a null pointer dereference. To resolve this, fix vfio_device_get_from_dev() to not take the dev_get_drvdata() shortcut and instead traverse through the iommu_group, vfio_group, vfio_device path to get a reference we can trust. Once we have that reference, we know the device isn't in transition and we can test to make sure the driver is still what we expect, so that we don't interfere with devices we don't own. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-05-29drivers/vfio: Allow type-1 IOMMU instantiation on top of an ARM SMMUv3Will Deacon1-1/+1
The ARM SMMUv3 driver is compatible with the notion of a type-1 IOMMU in VFIO. This patch allows VFIO_IOMMU_TYPE1 to be selected if ARM_SMMU_V3=y. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-05-12drivers/vfio: Support EEH error injectionGavin Shan1-0/+10
The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR) to inject the specified EEH error, which is represented by (struct vfio_eeh_pe_err), to the indicated PE for testing purpose. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-02vfio: Fix runaway interruptible timeoutAlex Williamson1-3/+18
Commit 13060b64b819 ("vfio: Add and use device request op for vfio bus drivers") incorrectly makes use of an interruptible timeout. When interrupted, the signal remains pending resulting in subsequent timeouts occurring instantly. This makes the loop spin at a much higher rate than intended. Instead of making this completely non-interruptible, we can change this into a sort of interruptible-once behavior and use the "once" to log debug information. The driver API doesn't allow us to abort and return an error code. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Fixes: 13060b64b819 Cc: stable@vger.kernel.org # v4.0
2015-05-01vfio-pci: Log device requests more verboselyAlex Williamson1-1/+7
Log some clues indicating whether the user is receiving device request interfaces or not listening. This can help indicate why a driver unbind is blocked or explain why QEMU automatically unplugged a device from the VM. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-08vfio-pci: Fix use after freeAlex Williamson1-0/+1
Reported by 0-day test infrastructure. Fixes: ecaa1f6a0154 ("vfio-pci: Add VGA arbiter client") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Move idle devices to D3hot power stateAlex Williamson1-3/+33
We can save some power by putting devices that are bound to vfio-pci but not in use by the user in the D3hot power state. Devices get woken into D0 when opened by the user. Resets return the device to D0, so we need to re-apply the low power state after a bus reset. It's tempting to try to use D3cold, but we have no reason to inhibit hotplug of idle devices and we might get into a loop of having the device disappear before we have a chance to try to use it. A new module parameter allows this feature to be disabled if there are devices that misbehave as a result of this change. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Remove warning if try-reset failsAlex Williamson1-8/+2
As indicated in the comment, this is not entirely uncommon and causes user concern for no reason. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Allow PCI IDs to be specified as module optionsAlex Williamson1-0/+49
This copies the same support from pci-stub for exactly the same purpose, enabling a set of PCI IDs to be automatically added to the driver's dynamic ID table at module load time. The code here is pretty simple and both vfio-pci and pci-stub are fairly unique in being meta drivers, capable of attaching to any device, so there's no attempt made to generalize the code into pci-core. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Add VGA arbiter clientAlex Williamson1-4/+63
If VFIO VGA access is disabled for the user, either by CONFIG option or module parameter, we can often opt-out of VGA arbitration. We can do this when PCI bridge control of VGA routing is possible. This means that we must have a parent bridge and there must only be a single VGA device below that bridge. Fortunately this is the typical case for discrete GPUs. Doing this allows us to minimize the impact of additional GPUs, in terms of VGA arbitration, when they are only used via vfio-pci for non-VGA applications. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Add module option to disable VGA region accessAlex Williamson1-3/+16
Add a module option so that we don't require a CONFIG change and kernel rebuild to disable VGA support. Not only can VGA support be troublesome in itself, but by disabling it we can reduce the impact to host devices by doing a VGA arbitration opt-out. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17vfio: Split virqfd into a separate module for vfio bus driversAlex Williamson6-12/+25
An unintended consequence of commit 42ac9bd18d4f ("vfio: initialize the virqfd workqueue in VFIO generic code") is that the vfio module is renamed to vfio_core so that it can include both vfio and virqfd. That's a user visible change that may break module loading scritps and it imposes eventfd support as a dependency on the core vfio code, which it's really not. virqfd is intended to be provided as a service to vfio bus drivers, so instead of wrapping it into vfio.ko, we can make it a stand-alone module toggled by vfio bus drivers. This has the additional benefit of removing initialization and exit from the core vfio code. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17vfio: virqfd_lock can be statickbuild test robot1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: put off the allocation of "minor" in vfio_create_groupZhen Lei1-7/+6
The next code fragment "list_for_each_entry" is not depend on "minor". With this patch, the free of "minor" in "list_for_each_entry" can be reduced, and there is no functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: implement IRQ masking/unmasking via an eventfdAntonios Motakis2-4/+45
With this patch the VFIO user will be able to set an eventfd that can be used in order to mask and unmask IRQs of platform devices. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: initialize the virqfd workqueue in VFIO generic codeAntonios Motakis4-11/+12
Now we have finally completely decoupled virqfd from VFIO_PCI. We can initialize it from the VFIO generic code, in order to safely use it from multiple independent VFIO bus drivers. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: move eventfd support code for VFIO_PCI to a separate fileAntonios Motakis4-219/+215
The virqfd functionality that is used by VFIO_PCI to implement interrupt masking and unmasking via an eventfd, is generic enough and can be reused by another driver. Move it to a separate file in order to allow the code to be shared. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: pass an opaque pointer on virqfd initializationAntonios Motakis1-14/+16
VFIO_PCI passes the VFIO device structure *vdev via eventfd to the handler that implements masking/unmasking of IRQs via an eventfd. We can replace it in the virqfd infrastructure with an opaque type so we can make use of the mechanism from other VFIO bus drivers. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: add local lock for virqfd instead of depending on VFIO PCIAntonios Motakis1-15/+16
The Virqfd code needs to keep accesses to any struct *virqfd safe, but this comes into play only when creating or destroying eventfds, so sharing the same spinlock with the VFIO bus driver is not necessary. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: virqfd: rename vfio_pci_virqfd_init and vfio_pci_virqfd_exitAntonios Motakis3-7/+7
The functions vfio_pci_virqfd_init and vfio_pci_virqfd_exit are not really PCI specific, since we plan to reuse the virqfd code with more VFIO drivers in addition to VFIO_PCI. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: Move rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit from "vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export"] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and exportAntonios Motakis1-14/+16
We want to reuse virqfd functionality in multiple VFIO drivers; before moving these functions to core VFIO, add the vfio_ prefix to the virqfd_enable and virqfd_disable functions, and export them so they can be used from other modules. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: support for level sensitive interruptsAntonios Motakis2-3/+102
Level sensitive interrupts are exposed as maskable and automasked interrupts and are masked and disabled automatically when they fire. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: Move masked interrupt initialization from "vfio/platform: trigger an interrupt via eventfd"] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: trigger an interrupt via eventfdAntonios Motakis2-2/+94
This patch allows to set an eventfd for a platform device's interrupt, and also to trigger the interrupt eventfd from userspace for testing. Level sensitive interrupts are marked as maskable and are handled in a later patch. Edge triggered interrupts are not advertised as maskable and are implemented here using a simple and efficient IRQ handler. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: fix masked interrupt initialization] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: initial interrupts support codeAntonios Motakis3-3/+115
This patch is a skeleton for the VFIO_DEVICE_SET_IRQS IOCTL, around which most IRQ functionality is implemented in VFIO. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: return IRQ infoAntonios Motakis4-5/+89
Return information for the interrupts exposed by the device. This patch extends VFIO_DEVICE_GET_INFO with the number of IRQs and enables VFIO_DEVICE_GET_IRQ_INFO. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: support MMAP of MMIO regionsAntonios Motakis1-0/+65
Allow to memory map the MMIO regions of the device so userspace can directly access them. PIO regions are not being handled at this point. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: read and write support for the device fdAntonios Motakis2-0/+151
VFIO returns a file descriptor which we can use to manipulate the memory regions of the device. Usually, the user will mmap memory regions that are addressable on page boundaries, however for memory regions where this is not the case we cannot provide mmap functionality due to security concerns. For this reason we also allow to use read and write functions to the file descriptor pointing to the memory regions. We implement this functionality only for MMIO regions of platform devices; PIO regions are not being handled at this point. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>