summaryrefslogtreecommitdiff
path: root/drivers/vfio
AgeCommit message (Collapse)AuthorFilesLines
2016-01-27vfio/noiommu: Don't use iommu_present() to track fake groupsAlex Williamson1-14/+10
Using iommu_present() to determine whether an IOMMU group is real or fake has some problems. First, apparently Power systems don't register an IOMMU on the device bus, so the groups and containers get marked as noiommu and then won't bind to their actual IOMMU driver. Second, I expect we'll run into the same issue as we try to support vGPUs through vfio, since they're likely to emulate this behavior of creating an IOMMU group on a virtual device and then providing a vfio IOMMU backend tailored to the sort of isolation they provide, which won't necessarily be fully compatible with the IOMMU API. The solution here is to use the existing iommudata interface to IOMMU groups, which allows us to easily identify the fake groups we've created for noiommu purposes. The iommudata we set is purely arbitrary since we're only comparing the address, so we use the address of the noiommu switch itself. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Anatoly Burakov <anatoly.burakov@intel.com> Tested-by: Santosh Shukla <sshukla@mvista.com> Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-01-04vfio/iommu_type1: make use of info.flagsPierre Morel1-1/+1
The flags entry is there to tell the user that some optional information is available. Since we report the iova_pgsizes signal it to the user by setting the flags to VFIO_IOMMU_INFO_PGSIZES. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-12-22vfio: Include No-IOMMU modeAlex Williamson3-7/+200
There is really no way to safely give a user full access to a DMA capable device without an IOMMU to protect the host system. There is also no way to provide DMA translation, for use cases such as device assignment to virtual machines. However, there are still those users that want userspace drivers even under those conditions. The UIO driver exists for this use case, but does not provide the degree of device access and programming that VFIO has. In an effort to avoid code duplication, this introduces a No-IOMMU mode for VFIO. This mode requires building VFIO with CONFIG_VFIO_NOIOMMU and enabling the "enable_unsafe_noiommu_mode" option on the vfio driver. This should make it very clear that this mode is not safe. Additionally, CAP_SYS_RAWIO privileges are necessary to work with groups and containers using this mode. Groups making use of this support are named /dev/vfio/noiommu-$GROUP and can only make use of the special VFIO_NOIOMMU_IOMMU for the container. Use of this mode, specifically binding a device without a native IOMMU group to a VFIO bus driver will taint the kernel and should therefore not be considered supported. This patch includes no-iommu support for the vfio-pci bus driver only. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22VFIO: platform: reset: fix a warning message conditionDan Carpenter1-1/+1
This loop ends with count set to -1 and not zero so the warning message isn't printed when it should be. I've fixed this by change the postop to a preop. Fixes: 0990822c9866 ('VFIO: platform: reset: AMD xgbe reset module') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-12-04Revert: "vfio: Include No-IOMMU mode"Alex Williamson3-199/+10
Revert commit 033291eccbdb ("vfio: Include No-IOMMU mode") due to lack of a user. This was originally intended to fill a need for the DPDK driver, but uptake has been slow so rather than support an unproven kernel interface revert it and revisit when userspace catches up. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-21vfio: fix a warning messageDan Carpenter1-1/+1
The first argument to the WARN() macro has to be a condition. I'm sort of disappointed that this code doesn't generate a compiler warning. I guess -Wformat-extra-args doesn't work in the kernel. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-20vfio: platform: remove needless stack usageKees Cook1-4/+1
request_module already takes format strings, so no need to duplicate the effort. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-20vfio-pci: constify pci_error_handlers structuresJulia Lawall1-1/+1
This pci_error_handlers structure is never modified, like all the other pci_error_handlers structures, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-20vfio: Drop owner assignment from platform_driverKrzysztof Kozlowski1-1/+0
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-14Merge tag 'vfio-v4.4-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds15-90/+606
Pull VFIO updates from Alex Williamson: - Use kernel interfaces for VPD emulation (Alex Williamson) - Platform fix for releasing IRQs (Eric Auger) - Type1 IOMMU always advertises PAGE_SIZE support when smaller mapping sizes are available (Eric Auger) - Platform fixes for incorrectly using copies of structures rather than pointers to structures (James Morse) - Rework platform reset modules, fix leak, and add AMD xgbe reset module (Eric Auger) - Fix vfio_device_get_from_name() return value (Joerg Roedel) - No-IOMMU interface (Alex Williamson) - Fix potential out of bounds array access in PCI config handling (Dan Carpenter) * tag 'vfio-v4.4-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: make an array larger vfio: Include No-IOMMU mode vfio: Fix bug in vfio_device_get_from_name() VFIO: platform: reset: AMD xgbe reset module vfio: platform: reset: calxedaxgmac: fix ioaddr leak vfio: platform: add dev_info on device reset vfio: platform: use list of registered reset function vfio: platform: add compat in vfio_platform_device vfio: platform: reset: calxedaxgmac: add reset function registration vfio: platform: introduce module_vfio_reset_handler macro vfio: platform: add capability to register a reset function vfio: platform: introduce vfio-platform-base module vfio/platform: store mapped memory in region, instead of an on-stack copy vfio/type1: handle case where IOMMU does not support PAGE_SIZE size VFIO: platform: clear IRQ_NOAUTOEN when de-assigning the IRQ vfio/pci: Use kernel VPD access functions vfio: Whitelist PCI bridges
2015-11-09vfio/pci: make an array largerDan Carpenter1-2/+2
Smatch complains about a possible out of bounds error: drivers/vfio/pci/vfio_pci_config.c:1241 vfio_cap_init() error: buffer overflow 'pci_cap_length' 20 <= 20 The problem is that pci_cap_length[] was defined as large enough to hold "PCI_CAP_ID_AF + 1" elements. The code in vfio_cap_init() assumes it has PCI_CAP_ID_MAX + 1 elements. Originally, PCI_CAP_ID_AF and PCI_CAP_ID_MAX were the same but then we introduced PCI_CAP_ID_EA in commit f80b0ba95964 ("PCI: Add Enhanced Allocation register entries") so now the array is too small. Let's fix this by making the array size PCI_CAP_ID_MAX + 1. And let's make a similar change to pci_ext_cap_length[] for consistency. Also both these arrays can be made const. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-04vfio: Include No-IOMMU modeAlex Williamson3-10/+199
There is really no way to safely give a user full access to a DMA capable device without an IOMMU to protect the host system. There is also no way to provide DMA translation, for use cases such as device assignment to virtual machines. However, there are still those users that want userspace drivers even under those conditions. The UIO driver exists for this use case, but does not provide the degree of device access and programming that VFIO has. In an effort to avoid code duplication, this introduces a No-IOMMU mode for VFIO. This mode requires building VFIO with CONFIG_VFIO_NOIOMMU and enabling the "enable_unsafe_noiommu_mode" option on the vfio driver. This should make it very clear that this mode is not safe. Additionally, CAP_SYS_RAWIO privileges are necessary to work with groups and containers using this mode. Groups making use of this support are named /dev/vfio/noiommu-$GROUP and can only make use of the special VFIO_NOIOMMU_IOMMU for the container. Use of this mode, specifically binding a device without a native IOMMU group to a VFIO bus driver will taint the kernel and should therefore not be considered supported. This patch includes no-iommu support for the vfio-pci bus driver only. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-04vfio: Fix bug in vfio_device_get_from_name()Joerg Roedel1-3/+4
The vfio_device_get_from_name() function might return a non-NULL pointer, when called with a device name that is not found in the list. This causes undefined behavior, in my case calling an invalid function pointer later on: kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffff8800cb3ddc08 [...] Call Trace: [<ffffffffa03bd733>] ? vfio_group_fops_unl_ioctl+0x253/0x410 [vfio] [<ffffffff811efc4d>] do_vfs_ioctl+0x2cd/0x4c0 [<ffffffff811f9657>] ? __fget+0x77/0xb0 [<ffffffff811efeb9>] SyS_ioctl+0x79/0x90 [<ffffffff81001bb0>] ? syscall_return_slowpath+0x50/0x130 [<ffffffff8167f776>] entry_SYSCALL_64_fastpath+0x16/0x75 Fix the issue by returning NULL when there is no device with the requested name in the list. Cc: stable@vger.kernel.org # v4.2+ Fixes: 4bc94d5dc95d ("vfio: Fix lockdep issue") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03VFIO: platform: reset: AMD xgbe reset moduleEric Auger3-0/+137
This patch introduces a module that registers and implements a low-level reset function for the AMD XGBE device. it performs the following actions: - reset the PHY - disable auto-negotiation - disable & clear auto-negotiation IRQ - soft-reset the MAC Those tiny pieces of code are inherited from the native xgbe driver. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: reset: calxedaxgmac: fix ioaddr leakEric Auger1-7/+7
In the current code the vfio_platform_region is copied on the stack. As a consequence the ioaddr address is not iounmapped in the vfio platform driver (vfio_platform_regions_cleanup). The patch uses the pointer to the region instead. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: add dev_info on device resetEric Auger2-2/+13
It might be helpful for the end-user to check the device reset function was found by the vfio platform reset framework. Lets store a pointer to the struct device in vfio_platform_device and trace when the reset function is called or not found. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: use list of registered reset functionEric Auger3-30/+30
Remove the static lookup table and use the dynamic list of registered reset functions instead. Also load the reset module through its alias. The reset struct module pointer is stored in vfio_platform_device. We also remove the useless struct device pointer parameter in vfio_platform_get_reset. This patch fixes the issue related to the usage of __symbol_get, which besides from being moot, prevented compilation with CONFIG_MODULES disabled. Also usage of MODULE_ALIAS makes possible to add a new reset module without needing to update the framework. This was suggested by Arnd. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: add compat in vfio_platform_deviceEric Auger2-7/+9
Let's retrieve the compatibility string on probe and store it in the vfio_platform_device struct Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: reset: calxedaxgmac: add reset function registrationEric Auger1-2/+2
This patch adds the reset function registration/unregistration. This is handled through the module_vfio_reset_handler macro. This latter also defines a MODULE_ALIAS which simplifies the load from vfio-platform. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: introduce module_vfio_reset_handler macroEric Auger1-0/+14
The module_vfio_reset_handler macro - define a module alias - implement module init/exit function which respectively registers and unregisters the reset function. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: add capability to register a reset functionEric Auger2-0/+47
In preparation for subsequent changes in reset function lookup, lets introduce a dynamic list of reset combos (compat string, reset module, reset function). The list can be populated/voided with vfio_platform_register/unregister_reset. Those are not yet used in this patch. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio: platform: introduce vfio-platform-base moduleEric Auger5-4/+18
To prepare for vfio platform reset rework let's build vfio_platform_common.c and vfio_platform_irq.c in a separate module from vfio-platform and vfio-amba. This makes possible to have separate module inits and works around a race between platform driver init and vfio reset module init: that way we make sure symbols exported by base are available when vfio-platform driver gets probed. The open/release being implemented in the base module, the ref count is applied to the parent module instead. Signed-off-by: Eric Auger <eric.auger@linaro.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio/platform: store mapped memory in region, instead of an on-stack copyJames Morse1-18/+18
vfio_platform_{read,write}_mmio() call ioremap_nocache() to map a region of io memory, which they store in struct vfio_platform_region to be eventually re-used, or unmapped by vfio_platform_regions_cleanup(). These functions receive a copy of their struct vfio_platform_region argument on the stack - so these mapped areas are always allocated, and always leaked. Pass this argument as a pointer instead. Fixes: 6e3f26456009 "vfio/platform: read and write support for the device fd" Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-03vfio/type1: handle case where IOMMU does not support PAGE_SIZE sizeEric Auger1-1/+14
Current vfio_pgsize_bitmap code hides the supported IOMMU page sizes smaller than PAGE_SIZE. As a result, in case the IOMMU does not support PAGE_SIZE page, the alignment check on map/unmap is done with larger page sizes, if any. This can fail although mapping could be done with pages smaller than PAGE_SIZE. This patch modifies vfio_pgsize_bitmap implementation so that, in case the IOMMU supports page sizes smaller than PAGE_SIZE we pretend PAGE_SIZE is supported and hide sub-PAGE_SIZE sizes. That way the user will be able to map/unmap buffers whose size/ start address is aligned with PAGE_SIZE. Pinning code uses that granularity while iommu driver can use the sub-PAGE_SIZE size to map the buffer. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-28VFIO: platform: clear IRQ_NOAUTOEN when de-assigning the IRQEric Auger1-0/+1
The vfio platform driver currently sets the IRQ_NOAUTOEN before doing the request_irq to properly handle the user masking. However it does not clear it when de-assigning the IRQ. This brings issues when loading the native driver again which may not explicitly enable the IRQ. This problem was observed with xgbe driver. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-27vfio/pci: Use kernel VPD access functionsAlex Williamson1-1/+69
The PCI VPD capability operates on a set of window registers in PCI config space. Writing to the address register triggers either a read or write, depending on the setting of the PCI_VPD_ADDR_F bit within the address register. The data register provides either the source for writes or the target for reads. This model is susceptible to being broken by concurrent access, for which the kernel has adopted a set of access functions to serialize these registers. Additionally, commits like 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") and 7aa6ca4d39ed ("PCI: Add VPD function 0 quirk for Intel Ethernet devices") indicate that VPD registers can be shared between functions on multifunction devices creating dependencies between otherwise independent devices. Fortunately it's quite easy to emulate the VPD registers, simply storing copies of the address and data registers in memory and triggering a VPD read or write on writes to the address register. This allows vfio users to avoid seeing spurious register changes from accesses on other devices and enables the use of shared quirks in the host kernel. We can theoretically still race with access through sysfs, but the window of opportunity is much smaller. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Mark Rustad <mark.d.rustad@intel.com>
2015-10-27vfio: Whitelist PCI bridgesAlex Williamson1-6/+25
When determining whether a group is viable, we already allow devices bound to pcieport. Generalize this to include any PCI bridge device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-01vfio: Register/unregister irq_bypass_producerFeng Wu4-0/+13
This patch adds the registration/unregistration of an irq_bypass_producer for MSI/MSIx on vfio pci devices. Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-25vfio: Fix lockdep issueAlex Williamson1-37/+54
When we open a device file descriptor, we currently have the following: vfio_group_get_device_fd() mutex_lock(&group->device_lock); open() ... if (ret) release() If we hit that error case, we call the backend driver release path, which for vfio-pci looks like this: vfio_pci_release() vfio_pci_disable() vfio_pci_try_bus_reset() vfio_pci_get_devs() vfio_device_get_from_dev() vfio_group_get_device() mutex_lock(&group->device_lock); Whoops, we've stumbled back onto group.device_lock and created a deadlock. There's a low likelihood of ever seeing this play out, but obviously it needs to be fixed. To do that we can use a reference to the vfio_device for vfio_group_get_device_fd() rather than holding the lock. There was a loop in this function, theoretically allowing multiple devices with the same name, but in practice we don't expect such a thing to happen and the code is already aborting from the loop with break on any sort of error rather than continuing and only parsing the first match anyway, so the loop was effectively unused already. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Fixes: 20f300175a1e ("vfio/pci: Fix racy vfio_device_get_from_dev() call") Reported-by: Joerg Roedel <joro@8bytes.org> Tested-by: Joerg Roedel <jroedel@suse.de>
2015-06-28Merge tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds9-19/+195
Pull VFIO updates from Alex Williamson: - fix race with device reference versus driver release (Alex Williamson) - add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger) - enable vfio-platform for ARM64 (Eric Auger) - tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson) * tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio: MAINTAINERS: Add vfio-platform sub-maintainer VFIO: platform: enable ARM64 build VFIO: platform: Calxeda xgmac reset module VFIO: platform: populate the reset function on probe VFIO: platform: add reset callback VFIO: platform: add reset struct and lookup table vfio/pci: Fix racy vfio_device_get_from_dev() call
2015-06-24Merge tag 'powerpc-4.2-1' of ↵Linus Torvalds2-101/+1010
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...
2015-06-22VFIO: platform: enable ARM64 buildEric Auger1-1/+1
This patch enables building VFIO platform and derivatives on ARM64. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22VFIO: platform: Calxeda xgmac reset moduleEric Auger6-0/+107
This patch introduces a module that registers and implements a basic reset function for the Calxeda xgmac device. This latter basically disables interrupts and stops DMA transfers. The reset function code is inherited from the native calxeda xgmac driver. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22VFIO: platform: populate the reset function on probeEric Auger1-1/+36
The reset function lookup happens on vfio-platform probe. The reset module load is requested and a reference to the function symbol is hold. The reference is released on vfio-platform remove. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22VFIO: platform: add reset callbackEric Auger2-2/+14
A new reset callback is introduced. If this callback is populated, the reset is invoked on device first open/last close or upon userspace ioctl. The modality is exposed on VFIO_DEVICE_GET_INFO. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-18VFIO: platform: add reset struct and lookup tableEric Auger2-0/+9
This patch introduces the vfio_platform_reset_combo struct that stores all the information useful to handle the reset modality: compat string, name of the reset function, name of the module that implements the reset function. A lookup table of such structures is added, currently void. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-11vfio: powerpc/spapr: Support Dynamic DMA windowsAlexey Kardashevskiy1-1/+195
This adds create/remove window ioctls to create and remove DMA windows. sPAPR defines a Dynamic DMA windows capability which allows para-virtualized guests to create additional DMA windows on a PCI bus. The existing linux kernels use this new window to map the entire guest memory and switch to the direct DMA operations saving time on map/unmap requests which would normally happen in a big amounts. This adds 2 ioctl handlers - VFIO_IOMMU_SPAPR_TCE_CREATE and VFIO_IOMMU_SPAPR_TCE_REMOVE - to create and remove windows. Up to 2 windows are supported now by the hardware and by this driver. This changes VFIO_IOMMU_SPAPR_TCE_GET_INFO handler to return additional information such as a number of supported windows and maximum number levels of TCE tables. DDW is added as a capability, not as a SPAPR TCE IOMMU v2 unique feature as we still want to support v2 on platforms which cannot do DDW for the sake of TCE acceleration in KVM (coming soon). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Register memory and define IOMMU v2Alexey Kardashevskiy1-80/+421
The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership ↵Alexey Kardashevskiy1-1/+87
control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: powerpc/powernv/ioda: Define and implement DMA windows APIAlexey Kardashevskiy1-8/+11
This extends iommu_table_group_ops by a set of callbacks to support dynamic DMA windows management. create_table() creates a TCE table with specific parameters. it receives iommu_table_group to know nodeid in order to allocate TCE table memory closer to the PHB. The exact format of allocated multi-level table might be also specific to the PHB model (not the case now though). This callback calculated the DMA window offset on a PCI bus from @num and stores it in a just created table. set_window() sets the window at specified TVT index + @num on PHB. unset_window() unsets the window from specified TVT. This adds a free() callback to iommu_table_ops to free the memory (potentially a tree of tables) allocated for the TCE table. create_table() and free() are supposed to be called once per VFIO container and set_window()/unset_window() are supposed to be called for every group in a container. This adds IOMMU capabilities to iommu_table_group such as default 32bit window parameters and others. This makes use of new values in vfio_iommu_spapr_tce. IODA1/P5IOC2 do not support DDW so they do not advertise pagemasks to the userspace. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11powerpc/iommu/powernv: Release replaced TCEAlexey Kardashevskiy1-25/+38
At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership controlAlexey Kardashevskiy1-5/+65
This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11powerpc/spapr: vfio: Switch from iommu_table to new iommu_table_groupAlexey Kardashevskiy1-36/+86
So far one TCE table could only be used by one IOMMU group. However IODA2 hardware allows programming the same TCE table address to multiple PE allowing sharing tables. This replaces a single pointer to a group in a iommu_table struct with a linked list of groups which provides the way of invalidating TCE cache for every PE when an actual TCE table is updated. This adds pnv_pci_link_table_and_group() and pnv_pci_unlink_table_and_group() helpers to manage the list. However without VFIO, it is still going to be a single IOMMU group per iommu_table. This changes iommu_add_device() to add a device to a first group from the group list of a table as it is only called from the platform init code or PCI bus notifier and at these moments there is only one group per table. This does not change TCE invalidation code to loop through all attached groups in order to simplify this patch and because it is not really needed in most cases. IODA2 is fixed in a later patch. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11powerpc/spapr: vfio: Replace iommu_table with iommu_table_groupAlexey Kardashevskiy1-10/+13
Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Rework groups attachingAlexey Kardashevskiy1-16/+24
This is to make extended ownership and multiple groups support patches simpler for review. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Moving pinning/unpinning to helpersAlexey Kardashevskiy1-20/+41
This is a pretty mechanical patch to make next patches simpler. New tce_iommu_unuse_page() helper does put_page() now but it might skip that after the memory registering patch applied. As we are here, this removes unnecessary checks for a value returned by pfn_to_page() as it cannot possibly return NULL. This moves tce_iommu_disable() later to let tce_iommu_clear() know if the container has been enabled because if it has not been, then put_page() must not be called on TCEs from the TCE table. This situation is not yet possible but it will after KVM acceleration patchset is applied. This changes code to work with physical addresses rather than linear mapping addresses for better code readability. Following patches will add an xchg() callback for an IOMMU table which will accept/return physical addresses (unlike current tce_build()) which will eliminate redundant conversions. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Disable DMA mappings on disabled containerAlexey Kardashevskiy1-0/+6
At the moment DMA map/unmap requests are handled irrespective to the container's state. This allows the user space to pin memory which it might not be allowed to pin. This adds checks to MAP/UNMAP that the container is enabled, otherwise -EPERM is returned. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Move locked_vm accounting to helpersAlexey Kardashevskiy1-19/+63
There moves locked pages accounting to helpers. Later they will be reused for Dynamic DMA windows (DDW). This reworks debug messages to show the current value and the limit. This stores the locked pages number in the container so when unlocking the iommu table pointer won't be needed. This does not have an effect now but it will with the multiple tables per container as then we will allow attaching/detaching groups on fly and we may end up having a container with no group attached but with the counter incremented. While we are here, update the comment explaining why RLIMIT_MEMLOCK might be required to be bigger than the guest RAM. This also prints pid of the current process in pr_warn/pr_debug. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Use it_page_sizeAlexey Kardashevskiy1-13/+13
This makes use of the it_page_size from the iommu_table struct as page size can differ. This replaces missing IOMMU_PAGE_SHIFT macro in commented debug code as recently introduced IOMMU_PAGE_XXX macros do not include IOMMU_PAGE_SHIFT. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11vfio: powerpc/spapr: Check that IOMMU page is fully contained by system pageAlexey Kardashevskiy1-0/+16
This checks that the TCE table page size is not bigger that the size of a page we just pinned and going to put its physical address to the table. Otherwise the hardware gets unwanted access to physical memory between the end of the actual page and the end of the aligned up TCE page. Since compound_order() and compound_head() work correctly on non-huge pages, there is no need for additional check whether the page is huge. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>