summaryrefslogtreecommitdiff
path: root/drivers/virtio
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+3
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ...
2017-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-04Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: - Introduce the ORC unwinder, which can be enabled via CONFIG_ORC_UNWINDER=y. The ORC unwinder is a lightweight, Linux kernel specific debuginfo implementation, which aims to be DWARF done right for unwinding. Objtool is used to generate the ORC unwinder tables during build, so the data format is flexible and kernel internal: there's no dependency on debuginfo created by an external toolchain. The ORC unwinder is almost two orders of magnitude faster than the (out of tree) DWARF unwinder - which is important for perf call graph profiling. It is also significantly simpler and is coded defensively: there has not been a single ORC related kernel crash so far, even with early versions. (knock on wood!) But the main advantage is that enabling the ORC unwinder allows CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel measurably: With frame pointers disabled, GCC does not have to add frame pointer instrumentation code to every function in the kernel. The kernel's .text size decreases by about 3.2%, resulting in better cache utilization and fewer instructions executed, resulting in a broad kernel-wide speedup. Average speedup of system calls should be roughly in the 1-3% range - measurements by Mel Gorman [1] have shown a speedup of 5-10% for some function execution intense workloads. The main cost of the unwinder is that the unwinder data has to be stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel config - which is a modest cost on modern x86 systems. Given how young the ORC unwinder code is it's not enabled by default - but given the performance advantages the plan is to eventually make it the default unwinder on x86. See Documentation/x86/orc-unwinder.txt for more details. - Remove lguest support: its intended role was that of a temporary proof of concept for virtualization, plus its removal will enable the reduction (removal) of the paravirt API as well, so Rusty agreed to its removal. (Juergen Gross) - Clean up and fix FSGS related functionality (Andy Lutomirski) - Clean up IO access APIs (Andy Shevchenko) - Enhance the symbol namespace (Jiri Slaby) * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) objtool: Handle GCC stack pointer adjustment bug x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone() x86/fpu/math-emu: Add ENDPROC to functions x86/boot/64: Extract efi_pe_entry() from startup_64() x86/boot/32: Extract efi_pe_entry() from startup_32() x86/lguest: Remove lguest support x86/paravirt/xen: Remove xen_patch() objtool: Fix objtool fallthrough detection with function padding x86/xen/64: Fix the reported SS and CS in SYSCALL objtool: Track DRAP separately from callee-saved registers objtool: Fix validate_branch() return codes x86: Clarify/fix no-op barriers for text_poke_bp() x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs selftests/x86/fsgsbase: Test selectors 1, 2, and 3 x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common x86/asm: Fix UNWIND_HINT_REGS macro for older binutils x86/asm/32: Fix regs_get_register() on segment registers x86/xen/64: Rearrange the SYSCALL entries x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads ...
2017-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+7
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25virtio_pci: fix cpu affinity supportChristoph Hellwig1-3/+7
Commit 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues"") removed the adjustment of the pre_vectors for the virtio MSI-X vector allocation which was added in commit fb5e31d9 ("virtio: allow drivers to request IRQ affinity when creating VQs"). This will lead to an incorrect assignment of MSI-X vectors, and potential deadlocks when offlining cpus. Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues") Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-25scsi: virtio: Reduce BUG if total_sg > virtqueue size to WARN.Richard W.M. Jones1-2/+3
If using indirect descriptors, you can make the total_sg as large as you want. If not, BUG is too serious because the function later returns -ENOSPC. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24x86/lguest: Remove lguest supportJuergen Gross1-2/+2
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-16/+12
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25virtio-balloon: coding format cleanupWei Wang1-2/+4
Clean up the comment format. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio-balloon: deflate via a page listLiang Li1-14/+8
This patch saves the deflated pages to a list, instead of the PFN array. Accordingly, the balloon_pfn_to_page() function is removed. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-24virtio_ring: allow to store zero as the ctxJason Wang1-1/+1
Allow zero to be store as a ctx, with this we could store e.g zero value which could be meaningful for the case of storing headroom through ctx. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18virtio_balloon: disable VIOMMU supportMichael S. Tsirkin1-0/+7
virtio balloon bypasses the DMA API entirely so does not support the VIOMMU right now. It's not clear we need that support, for now let's just make sure we don't pretend to support it. Cc: stable@vger.kernel.org Cc: Wei Wang <wei.w.wang@intel.com> Fixes: 1a937693993f ("virtio: new feature to detect IOMMU device quirk") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2017-05-02virtio: allow extra context per descriptorMichael S. Tsirkin1-13/+57
Allow extra context per descriptor. To avoid slow down for data path, this disables use of indirect descriptors for this vq. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-02virtio: add context flag to find vqsMichael S. Tsirkin6-17/+35
Allows maintaining extra context per vq. For ease of use, passing in NULL is legal and disables the feature for all vqs. Includes fixes by Christian for s390, acked by Cornelia. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-02virtio: wrap find_vqsMichael S. Tsirkin2-4/+2
We are going to add more parameters to find_vqs, let's wrap the call so we don't need to tweak all drivers every time. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11virtio-pci: Remove affinity hint before freeing the interruptMarc Zyngier1-3/+6
virtio-pci registers a per-vq affinity hint when using MSIX, but fails to remove it when freeing the interrupt, resulting in this type of splat: [ 31.111202] WARNING: CPU: 0 PID: 2823 at kernel/irq/manage.c:1503 __free_irq+0x2c4/0x2c8 [ 31.114689] Modules linked in: [ 31.116101] CPU: 0 PID: 2823 Comm: kexec Not tainted 4.10.0+ #6941 [ 31.118911] Hardware name: Generic DT based system [ 31.121319] [<c022fb78>] (unwind_backtrace) from [<c0229d8c>] (show_stack+0x18/0x1c) [ 31.125017] [<c0229d8c>] (show_stack) from [<c05192f4>] (dump_stack+0x84/0x98) [ 31.128427] [<c05192f4>] (dump_stack) from [<c023d940>] (__warn+0xf4/0x10c) [ 31.131910] [<c023d940>] (__warn) from [<c023da20>] (warn_slowpath_null+0x28/0x30) [ 31.135543] [<c023da20>] (warn_slowpath_null) from [<c0290238>] (__free_irq+0x2c4/0x2c8) [ 31.139355] [<c0290238>] (__free_irq) from [<c02902d0>] (free_irq+0x44/0x78) [ 31.142909] [<c02902d0>] (free_irq) from [<c059d3a8>] (vp_del_vqs+0x68/0x1c0) [ 31.146299] [<c059d3a8>] (vp_del_vqs) from [<c056ca4c>] (pci_device_shutdown+0x3c/0x78) The obvious fix is to drop the affinity hint before freeing the interrupt. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: remove struct virtio_pci_vq_info"Michael S. Tsirkin4-43/+122
This reverts commit 5c34d002dcc7a6dd665a19d098b4f4cd5501ba1a. Conflicts: drivers/virtio/virtio_pci_common.c The cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. This reverts the cleanup changes but keeps the affinity support. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: use shared interrupts for virtqueues"Michael S. Tsirkin2-112/+148
This reverts commit 07ec51480b5eb1233f8c1b0f5d7a7c8d1247c507. Conflicts: drivers/virtio/virtio_pci_common.c Unfortunately the idea does not work with threadirqs as more than 32 queues can then map to a single interrupts. Further, the cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. This reverts the cleanup changes but keeps the affinity support. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev"Michael S. Tsirkin4-4/+7
This reverts commit 53a020c661741f3b87ad3ac6fa545088aaebac9b. The cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: simplify MSI-X setup"Michael S. Tsirkin1-17/+15
This reverts commit 52a61516125fa9a21b3bdf4f90928308e2e5573f. Conflicts: drivers/virtio/virtio_pci_common.c The cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. This reverts the cleanup changes but keeps the affinity support. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-10Revert "virtio_pci: fix out of bound access for msix_names"Michael S. Tsirkin1-5/+4
This reverts commit de85ec8b07f82c8c84de7687f769e74bf4c26a1e. Follow-up patches will revert 07ec51480b5e ("virtio_pci: use shared interrupts for virtqueues") that triggered the problem so no need for this one anymore. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-07virtio: allow drivers to validate featuresMichael S. Tsirkin1-0/+6
Some drivers can't support all features in all configurations. At the moment we blindly set FEATURES_OK and later FAILED. Support this better by adding a callback drivers can use to do some early checks. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-28virtio_balloon: prevent uninitialized variable useArnd Bergmann1-0/+2
The latest gcc-7.0.1 snapshot reports a new warning: virtio/virtio_balloon.c: In function 'update_balloon_stats': virtio/virtio_balloon.c:258:26: error: 'events[2]' is used uninitialized in this function [-Werror=uninitialized] virtio/virtio_balloon.c:260:26: error: 'events[3]' is used uninitialized in this function [-Werror=uninitialized] virtio/virtio_balloon.c:261:56: error: 'events[18]' is used uninitialized in this function [-Werror=uninitialized] virtio/virtio_balloon.c:262:56: error: 'events[17]' is used uninitialized in this function [-Werror=uninitialized] This seems absolutely right, so we should add an extra check to prevent copying uninitialized stack data into the statistics. >From all I can tell, this has been broken since the statistics code was originally added in 2.6.34. Fixes: 9564e138b1f6 ("virtio: Add memory statistics reporting to the balloon driver (V4)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-28virtio-balloon: use actual number of stats for stats queue buffersLadi Prosek1-7/+10
The virtio balloon driver contained a not-so-obvious invariant that update_balloon_stats has to update exactly VIRTIO_BALLOON_S_NR counters in order to send valid stats to the host. This commit fixes it by having update_balloon_stats return the actual number of counters, and its callers use it when pushing buffers to the stats virtqueue. Note that it is still out of spec to change the number of counters at run-time. "Driver MUST supply the same subset of statistics in all buffers submitted to the statsq." Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-28virtio_balloon: init 1st buffer in stats vqLadi Prosek1-0/+2
When init_vqs runs, virtio_balloon.stats is either uninitialized or contains stale values. The host updates its state with garbage data because it has no way of knowing that this is just a marker buffer used for signaling. This patch updates the stats before pushing the initial buffer. Alternative fixes: * Push an empty buffer in init_vqs. Not easily done with the current virtio implementation and violates the spec "Driver MUST supply the same subset of statistics in all buffers submitted to the statsq". * Push a buffer with invalid tags in init_vqs. Violates the same spec clause, plus "invalid tag" is not really defined. Note: the spec says: When using the legacy interface, the device SHOULD ignore all values in the first buffer in the statsq supplied by the driver after device initialization. Note: Historically, drivers supplied an uninitialized buffer in the first buffer. Unfortunately QEMU does not seem to implement the recommendation even for the legacy interface. Cc: stable@vger.kernel.org Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-28virtio_pci: fix out of bound access for msix_namesJason Wang1-4/+5
Fedora has received multiple reports of crashes when running 4.11 as a guest https://bugzilla.redhat.com/show_bug.cgi?id=1430297 https://bugzilla.redhat.com/show_bug.cgi?id=1434462 https://bugzilla.kernel.org/show_bug.cgi?id=194911 https://bugzilla.redhat.com/show_bug.cgi?id=1433899 The crashes are not always consistent but they are generally some flavor of oops or GPF in virtio related code. Multiple people have done bisections (Thank you Thorsten Leemhuis and Richard W.M. Jones) and found this commit to be at fault 07ec51480b5eb1233f8c1b0f5d7a7c8d1247c507 is the first bad commit commit 07ec51480b5eb1233f8c1b0f5d7a7c8d1247c507 Author: Christoph Hellwig <hch@lst.de> Date: Sun Feb 5 18:15:19 2017 +0100 virtio_pci: use shared interrupts for virtqueues The issue seems to be an out of bounds access to the msix_names array corrupting kernel memory. Fixes: 07ec51480b5e ("virtio_pci: use shared interrupts for virtqueues") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
2017-03-03Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
2017-03-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds7-279/+184
Pull vhost updates from Michael Tsirkin: "virtio, vhost: optimizations, fixes Looks like a quiet cycle for vhost/virtio, just a couple of minor tweaks. Most notable is automatic interrupt affinity for blk and scsi. Hopefully other devices are not far behind" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-console: avoid DMA from stack vhost: introduce O(1) vq metadata cache virtio_scsi: use virtio IRQ affinity virtio_blk: use virtio IRQ affinity blk-mq: provide a default queue mapping for virtio device virtio: provide a method to get the IRQ affinity mask for a virtqueue virtio: allow drivers to request IRQ affinity when creating VQs virtio_pci: simplify MSI-X setup virtio_pci: don't duplicate the msix_enable flag in struct pci_dev virtio_pci: use shared interrupts for virtqueues virtio_pci: remove struct virtio_pci_vq_info vhost: try avoiding avail index access when getting descriptor virtio_mmio: expose header to userspace
2017-03-02sched/headers: Prepare to remove the <linux/magic.h> include from ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> Update files that depend on the magic.h inclusion. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27virtio: provide a method to get the IRQ affinity mask for a virtqueueChristoph Hellwig4-0/+16
This basically passed up the pci_irq_get_affinity information through virtio through an optional get_vq_affinity method. It is only implemented by the PCI backend for now, and only when we use per-virtqueue IRQs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27virtio: allow drivers to request IRQ affinity when creating VQsChristoph Hellwig6-17/+23
Add a struct irq_affinity pointer to the find_vqs methods, which if set is used to tell the PCI layer to create the MSI-X vectors for our I/O virtqueues with the proper affinity from the start. Compared to after the fact affinity hints this gives us an instantly working setup and allows to allocate the irq descritors node-local and avoid interconnect traffic. Last but not least this will allow blk-mq queues are created based on the interrupt affinity for storage drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27virtio_pci: simplify MSI-X setupChristoph Hellwig1-17/+18
Try to grab the MSI-X vectors early and fall back to the shared one before doing lots of allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27virtio_pci: don't duplicate the msix_enable flag in struct pci_devChristoph Hellwig4-7/+4
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27virtio_pci: use shared interrupts for virtqueuesChristoph Hellwig2-145/+106
This lets IRQ layer handle dispatching IRQs to separate handlers for the case where we don't have per-VQ MSI-X vectors, and allows us to greatly simplify the code based on the assumption that we always have interrupt vector 0 (legacy INTx or config interrupt for MSI-X) available, and any other interrupt is request/freed throught the VQ, even if the actual interrupt line might be shared in some cases. This allows removing a great deal of variables keeping track of the interrupt state in struct virtio_pci_device, as we can now simply walk the list of VQs and deal with per-VQ interrupt handlers there, and only treat vector 0 special. Additionally clean up the VQ allocation code to properly unwind on error instead of having a single global cleanup label, which is error prone, and in this case also leads to more code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27virtio_pci: remove struct virtio_pci_vq_infoChristoph Hellwig4-115/+39
We don't really need struct virtio_pci_vq_info, as most field in there are redundant: - the vq backpointer is not strictly neede to start with - the entry in the vqs list is not needed - the generic virtqueue already has list, we only need to check if it has a callback to get the same semantics - we can use a simple array to look up the MSI-X vec if needed. - That simple array now also duoble serves to replace the per_vq_vectors flag Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27virtio_mmio: expose header to userspaceMichael S. Tsirkin1-1/+1
It's handy for userspace emulators like QEMU. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-25mm balloon: umount balloon_mnt when removing vb deviceYisheng Xie1-0/+4
With CONFIG_BALLOON_COMPACTION=y the kernel will mount balloon_mnt for balloon page migration when we probe a virtio_balloon device. However we do not unmount it when removing the device. Fix this. Fixes: b1123ea6d3b3 ("mm: balloon: use general non-lru movable page feature") Link: http://lkml.kernel.org/r/1486531318-35189-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Rafael Aquini <aquini@redhat.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+0
The conflict was an interaction between a bug fix in the netvsc driver in 'net' and an optimization of the RX path in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07virtio_net: refactor freeze/restore logic into virtnet reset logicJohn Fastabend1-19/+23
For XDP we will need to reset the queues to allow for buffer headroom to be configured. In order to do this we need to essentially run the freeze()/restore() code path. Unfortunately the locking requirements between the freeze/restore and reset paths are different however so we can not simply reuse the code. This patch refactors the code path and adds a reset helper routine. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"Michael S. Tsirkin1-7/+0
This reverts commit c7070619f3408d9a0dffbed9149e6f00479cf43b. This has been shown to regress on some ARM systems: by forcing on DMA API usage for ARM systems, we have inadvertently kicked open a hornets' nest in terms of cache-coherency. Namely that unless the virtio device is explicitly described as capable of coherent DMA by firmware, the DMA APIs on ARM and other DT-based platforms will assume it is non-coherent. This turns out to cause a big problem for the likes of QEMU and kvmtool, which generate virtio-mmio devices in their guest DTs but neglect to add the often-overlooked "dma-coherent" property; as a result, we end up with the guest making non-cacheable accesses to the vring, the host doing so cacheably, both talking past each other and things going horribly wrong. We are working on a safer work-around. Fixes: c7070619f340 ("vring: Force use of DMA API for ARM-based systems with legacy devices") Reported-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-25vring: Force use of DMA API for ARM-based systems with legacy devicesWill Deacon1-0/+7
Booting Linux on an ARM fastmodel containing an SMMU emulation results in an unexpected I/O page fault from the legacy virtio-blk PCI device: [ 1.211721] arm-smmu-v3 2b400000.smmu: event 0x10 received: [ 1.211800] arm-smmu-v3 2b400000.smmu: 0x00000000fffff010 [ 1.211880] arm-smmu-v3 2b400000.smmu: 0x0000020800000000 [ 1.211959] arm-smmu-v3 2b400000.smmu: 0x00000008fa081002 [ 1.212075] arm-smmu-v3 2b400000.smmu: 0x0000000000000000 [ 1.212155] arm-smmu-v3 2b400000.smmu: event 0x10 received: [ 1.212234] arm-smmu-v3 2b400000.smmu: 0x00000000fffff010 [ 1.212314] arm-smmu-v3 2b400000.smmu: 0x0000020800000000 [ 1.212394] arm-smmu-v3 2b400000.smmu: 0x00000008fa081000 [ 1.212471] arm-smmu-v3 2b400000.smmu: 0x0000000000000000 <system hangs failing to read partition table> This is because the legacy virtio-blk device is behind an SMMU, so we have consequently swizzled its DMA ops and configured the SMMU to translate accesses. This then requires the vring code to use the DMA API to establish translations, otherwise all transactions will result in fatal faults and termination. Given that ARM-based systems only see an SMMU if one is really present (the topology is all described by firmware tables such as device-tree or IORT), then we can safely use the DMA API for all legacy virtio devices. Modern devices can advertise the prescense of an IOMMU using the VIRTIO_F_IOMMU_PLATFORM feature flag. Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: <stable@vger.kernel.org> Fixes: 876945dbf649 ("arm64: Hook up IOMMU dma_ops") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-25virtio_mmio: Set DMA masks appropriatelyRobin Murphy1-1/+19
Once DMA API usage is enabled, it becomes apparent that virtio-mmio is inadvertently relying on the default 32-bit DMA mask, which leads to problems like rapidly exhausting SWIOTLB bounce buffers. Ensure that we set the appropriate 64-bit DMA mask whenever possible, with the coherent mask suitably limited for the legacy vring as per a0be1db4304f ("virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices"). Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Fixes: b42111382f0e ("virtio_mmio: Use the DMA API if enabled") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio_mmio: Set dev.release() to avoid warningYuan Liu1-0/+2
Fix a warning thrown from virtio_mmio_remove(): Device 'virtio0' does not have a release() function The fix is according to virtio_pci_probe() of drivers/virtio/virtio_pci_common.c Signed-off-by: Yuan Liu <liuyuan@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio_ring: fix description of virtqueue_get_bufFelipe Franciosi1-1/+1
The device (not the driver) populates the used ring and includes the len of how much data was written. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio_pci: split vp_try_to_find_vqs into INTx and MSI-X variantsChristoph Hellwig1-40/+57
There is basically no shared logic between the INTx and MSI-X case in vp_try_to_find_vqs, so split the function into two and clean them up a little bit. Also remove the fairly pointless vp_request_intx wrapper while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio_pci: merge vp_free_vectors into vp_del_vqsChristoph Hellwig1-34/+27
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio_pci: remove the call to vp_free_vectors in vp_request_msix_vectorsChristoph Hellwig1-1/+0
vp_request_msix_vectors is only called by vp_try_to_find_vqs, which already calls vp_free_vectors through vp_del_vqs in the failure case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio_pci: use pci_alloc_irq_vectorsChristoph Hellwig2-26/+17
This avoids the separate allocation for the msix_entries structures, and instead allows us to use pci_irq_vector to find a given IRQ vector. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio: clean up handling of request_irq failureMichael S. Tsirkin1-3/+1
We call del_vqs twice when request_irq fails, this makes no sense. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>