summaryrefslogtreecommitdiff
path: root/drivers/w1/slaves
AgeCommit message (Collapse)AuthorFilesLines
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds4-28/+818
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-08w1: keep balance of mutex locks and refcntsAlexey Khoroshilov1-28/+31
w1_therm_eeprom() and w1_DS18B20_precision() decrement THERM_REFCNT on error paths, while they did not increment it yet. read_therm() unlocks bus mutex on some error paths, while it is not acquired. The patch makes sure all the functions keep the balance in usage of the mutex and the THERM_REFCNT. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridgeJan Kandziora3-0/+787
This subpatch adds a driver for the DS28E17 Onewire to I2C master bridge. Signed-off-by: Jan Kandziora <jjj@gmx.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-10Merge tag 'for-v4.14' of ↵Linus Torvalds3-124/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: "New chip/feature support: - bq27xxx: support updating battery config from DT - bq24190: support loading battery charge info from DT - LTC2941: add LTC2942/LTC2944 support - max17042: add ACPI support - max1721x: new driver Misc: - Move bq27xxx w1 driver from w1 into power-supply subsystem - Introduce power_supply_set_input_current_limit_from_supplier - constify stuff - some minor fixes" * tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: bq27xxx: enable writing capacity values for bq27421 power: supply: bq24190_charger: Get input_current_limit from our supplier power: supply: bq24190_charger: Export 5V boost converter as regulator power: supply: bq24190_charger: Add power_supply_battery_info support power: supply: bq24190_charger: Add property system-minimum-microvolt power: supply: bq24190_charger: Enable devicetree config dt-bindings: power: supply: Add docs for TI BQ24190 battery charger power: supply: bq27xxx: Remove duplicate chip data arrays power: supply: bq27xxx: Enable data memory update for certain chips power: supply: bq27xxx: Add chip IDs for previously shadowed chips power: supply: bq27xxx: Create single chip data table power: supply: bq24190_charger: Add ti,bq24192i to devicetree table power: supply: bq24190_charger: Add input_current_limit property power: supply: Add power_supply_set_input_current_limit_from_supplier helper power: supply: max17042_battery: Fix compiler warning power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies() power: supply: make device_attribute const power: supply: max17042_battery: Fix ACPI interrupt issues power: supply: max17042_battery: Add support for ACPI enumeration power: supply: lp8788: Make several arrays static const * const ...
2017-08-31drivers: w1: add hwmon temp support for w1_thermJaghathiswari Rankappagounder Natarajan1-0/+86
This change adds hwmon temp support for w1_therm. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31drivers: w1: refactor w1_slave_show to make the temp reading functionality ↵Jaghathiswari Rankappagounder Natarajan1-31/+51
separate Inside the w1_slave_show function refactor the code to read the temp into a separate function. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28drivers: w1: Add 1w slave driver for DS28E05 EEPROMAndrew Worsley3-0/+322
Add a one wire driver for the DS28E05 one wire slave chip. This chip requires OverDrive support to talk to it. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28w1: ds2438: make several functions staticColin Ian King1-4/+5
The functions w1_ds2438_get_page, w1_ds2438_get_temperature, w1_ds2438_change_config_bit and w1_ds2438_get_voltage are local to the source and do not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'w1_ds2438_get_page' was not declared. Should it be static? symbol 'w1_ds2438_get_temperature' was not declared. Should it be static? symbol 'w1_ds2438_change_config_bit' was not declared. Should it be static? symbol 'w1_ds2438_get_voltage' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-25power: supply: move HDQ interface for bq27xxx from w1 to power/supplyAndrew F. Davis3-124/+0
The HDQ interface driver should be in this folder just like the I2C interface driver. Move this driver out of drivers/w1/slave and into drivers/power/supply. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-09w1: Add subsystem kernel public interfaceAndrew F. Davis15-43/+53
Like other subsystems we should be able to define slave devices outside of the w1 directory. To do this we move public facing interface definitions to include/linux/w1.h and rename the internal definition file to w1_internal.h. As w1_family.h and w1_int.h contained almost entirely public driver interface definitions we simply removed these files and moved the remaining definitions into w1_internal.h. With this we can now start to move slave devices out of w1/slaves and into the subsystem based on the function they implement, again like other drivers. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25w1: Organize driver source to natural/common orderAndrew F. Davis13-55/+52
Structures and functions should be ordered such that forward declaration use is minimized. MODULE_* macros should immediately follow the structures and functions upon which they act. Remaining MODULE_* macros should be at the end of the file in alphabetical order. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17w1: w1_ds2760.h: fix defines indentationMariusz Bialonczyk1-4/+6
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17w1: add support for DS2438 Smart Battery MonitorMariusz Bialonczyk3-0/+397
Detailed information about support and provided sysfs files in my next commit which creates a documentation file: Documentation/w1/slaves/w1_ds2438 Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10w1: ds2405: use module_w1_family to simplify the codeWei Yongjun1-12/+1
module_w1_family() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25w1: add DS2405 addressable switch driverMaciej S. Szmigiero3-0/+247
This adds a driver for a DS2405 1-wire single-channel addressable switch. The DS2405 can also work as a single-channel binary remote sensor. This driver supports two attributes: "state" and "output" which are the same attribute names as supported by existing DS2406, DS2408 and DS2413 drivers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31drivers: w1: style corrections-pointers-blanklines-comparisonsBen Werbowyj1-2/+4
Correct pointer notations to include whitespace between variable type and "*" character. Inserted blank line after variable declatations at two locations. Rearranged comparison within an if statment to have the constant on the right-hand side. Signed-off-by: Ben Werbowyj <ben.werbowyj@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31drivers: w1: removed assignment from within if statementBen Werbowyj1-2/+4
Assignment of variable count removed from within an if statment. This was done at two locations in the file. Signed-off-by: Ben Werbowyj <ben.werbowyj@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31drivers: w1: style corrections for parenthesis and bracesBen Werbowyj1-6/+4
Inserted whitespace between command and open parenthesis at two locations. Removed new line between open brace and command/declaration at two locations. Signed-off-by: Ben Werbowyj <ben.werbowyj@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-03w1: add helper macro module_w1_familyAndrew F. Davis10-131/+10
The helper macro module_w1_family can be used in module drivers that only register a w1 driver in their module init functions. Add this macro and use it in all applicable drivers. Link: http://lkml.kernel.org/r/20160531204313.20979-2-afd@ti.com Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03w1: remove need for ida and use PLATFORM_DEVID_AUTOAndrew F. Davis3-66/+13
PLATFORM_DEVID_AUTO can be used to have the platform core assign a unique ID instead of manually creating one with IDA. Do this in all applicable drivers. Link: http://lkml.kernel.org/r/20160531204313.20979-1-afd@ti.com Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-02w1: add ability to set (SRAM) and store (EEPROM) configuration for temp ↵Ben Sen1-7/+211
sensors like DS18B20 Since many temperature sensors come "preconfigured" with a lower precision, people are stuck at that precision when running on a kernel based device (unlike the Dallas 1Wire library for e.g. Arduino, which supports writing the configuration/scratchpad). This patch adds write support for the scratchpad/precision registers via w1_slave sysfs. Signed-off-by: Ben Sen <0.x29a.0@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-23power: bq27xxx_battery: Platform initialization must declare a deviceAndrew F. Davis1-0/+1
When initialized as a platform device the initializer must now specify a device. An empty device name is no longer valid. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23power: bq27x00_battery: Renaming for consistencyAndrew F. Davis1-2/+2
Rename functions that are used by multiple devices. New devices have been added and the function names and driver name are no longer general enough for the functionality they provide. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-06-13w1: use correct lock on error in w1_seq_show()Dan Carpenter1-2/+2
I noticed there was a problem here because Smatch complained: drivers/w1/slaves/w1_therm.c:416 w1_seq_show() warn: inconsistent returns 'mutex:&sl->master->mutex'. Locked on: line 416 Unlocked on: line 413 The problem is that we lock ->mutex but we unlock ->bus_mutex on error. David Fries says that ->bus_mutex is correct and ->mutex is incorrect. Fixes: d9411e57dc7f ('w1: Add support for DS28EA00 sequence to w1-therm') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-13w1: fix for loop exit condition in w1_seq_show()Dan Carpenter1-1/+1
The W1_42_FINISHED_BYTE is 0xFF so the cast means the condition is never true. Fixes: d9411e57dc7f ('w1: Add support for DS28EA00 sequence to w1-therm') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1: Add support for DS28EA00 sequence to w1-thermMatt Campbell1-1/+101
This patch provides support for the DS28EA00 digital thermometer. The DS28EA00 provides an additional two pins for implementing a sequence detection algorithm. This feature allows you to determine the physical location of the chip in the 1-wire bus without needing pre-existing knowledge of the bus ordering. Support is provided through the sysfs w1_seq file. The file will contain a single line with an integer value representing the device index in the bus starting at 0. Signed-off-by: Matt Campbell <mattrcampbell@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1_therm reference count family dataDavid Fries1-15/+47
A temperature conversion can take 750 ms and when possible the w1_therm slave driver drops the bus_mutex to allow other bus operations, but that includes operations such as a periodic slave search, which can remove this slave when it is no longer detected. If that happens the sl->family_data will be freed and set to NULL causing w1_slave_show to crash when it wakes up. Signed-off-by: David Fries <David@Fries.net> Reported-By: Thorsten Bschorr <thorsten@bschorr.de> Tested-by: Thorsten Bschorr <thorsten@bschorr.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-27w1: support auto-load of w1_bq27000 module.NeilBrown1-2/+2
1/ change request_module call to zero-pad single digit family numbers. This appears to be the intention of the code, but not what it actually does. This means that the alias created for W1_FAMILY_SMEM_01 might actually be useful. 2/ Define a family name for the BQ27000 battery charge monitor. Unfortunately this is the same number as W1_FAMILY_SMEM_01 so if both a compiled on a system, one module might need to be blacklisted. 3/ Add a MODULE_ALIAS for the bq27000. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-23w1: select crc16 library for ds2406Arnd Bergmann1-0/+1
commit 94859308a21b "w1: new w1_ds2406 driver" added a new driver that uses the crc16 library, but didn't ensure that the core is there. This adds the necessary Kconfig statements, just like we have it for other w1 drivers. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Scott Alfter <scott@alfter.us> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20w1/slaves: use pr_* instead of printkFjodor Schelichow1-2/+1
This patch replaces all calls to the "printk" function within the "slaves" subdirectory by calls to the appropriate "pr_*" function thus addressing the following warning generated by the checkpatch script: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com> Signed-off-by: Roman Sommer <romsom2@yahoo.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20w1: new w1_ds2406 driverScott Alfter3-0/+176
Some preliminary work at making use of this driver led me to implement CRC-16 checks on read and write to deal with the occasional glitchiness of the 1-Wire bus. The revised driver (attached) returns an I/O error if the CRC check fails. When reading the chip's state, either you get a valid indication or you get an I/O error. When changing its state, either the change is successful or an I/O error is returned. Signed-off-by: Scott Alfter <scott@alfter.us> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-01w1: Remove excess dependencies on W1 for masters and slavesAlexander Shiyan1-5/+0
Configuration for masters and slaves is included only if W1 symbol enabled, so no reason to check it once more. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-08w1: use family_data instead of rom in w1_slaveDavid Fries1-2/+19
The first line printed from w1_slave gives the context of the w1 device. So does the second line, but if the CRC check failed, the second line contains the last successful result. It is confusing when it prints the temperature next to the line that might be a previous conversion and has nothing to do with that printed temperature value. Modify the code to store the last good conversion in family_data, which is designed for custom data structures. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2781: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-18/+18
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2760: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-17/+18
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2780: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-18/+18
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds28e04: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-70/+42
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2433: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-25/+22
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2431: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-24/+19
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2423: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-18/+9
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2413.c: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-50/+22
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2408: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-122/+52
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_therm: convert to use w1_family_ops.groupsGreg Kroah-Hartman1-15/+9
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: David Stevenson <david@avoncliff.com> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Michael Arndt <michael@scriptkiller.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-04drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test modeJean-Francois Dagenais1-0/+30
Power-up timing The DS2408 is sensitive to the power-on slew rate and can inadvertently power up with a test mode feature enabled. When this occurs, the P0 port does not respond to the Channel Access Write command. For most reliable operation, it is recommended to disable the test mode after every power-on reset using the Disable Test Mode sequence shown below. The 64-bit ROM code must be transmitted in the same bit sequence as with the Match ROM command, i.e., least significant bit first. This precaution is recommended in parasite power mode (VCC pin connected to GND) as well as with VCC power. Disable Test Mode: RST,PD,96h,<64-bit DS2408 ROM Code>,3Ch,RST,PD [akpm@linux-foundation.org: don't use kerenldoc token to introduce a non-kerneldoc comment, tweak whitespace] Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-04w1: add family based automatic module loadingAlexander Stein11-0/+16
This patch allows the 1-wire bus to autoload the corresponding module for each slave being attached. This works similar to bluetooth protocols. Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()Wei Yongjun1-1/+2
Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fail, and platform_device_del() should be used in the error handling case after platform_device_add() success. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()Wei Yongjun1-1/+2
Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fail, and platform_device_del() should be used in the error handling case after platform_device_add() success. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01drivers/w1/slaves/w1_ds2780.c: fix the error handling in w1_ds2780_add_slave()Wei Yongjun1-1/+2
Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fail, and platform_device_del() should be used in the error handling case after platform_device_add() success. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01drivers/w1/slaves/w1_bq27000.c: fix the error handling in w1_bq27000_add_slave()Wei Yongjun1-1/+3
Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fails, and also add the return value check of platform_device_add_data(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>