summaryrefslogtreecommitdiff
path: root/drivers/watchdog/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-04-22drivers: watchdog: Add StarFive Watchdog driverXingyu Wu1-0/+11
Add watchdog driver for the StarFive JH7100 and JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230314132437.121534-3-xingyu.wu@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-03-02Merge tag 'linux-watchdog-6.3-rc1' of ↵Linus Torvalds1-1/+3
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - qcom-wdt dt-bindings improvements and additions (like MSM8994 and MDM9615) - mtk_wdt: Add reset_by_toprgu support - devm_clk_get_enabled() helper changes - Fix kmemleak in watchdog_cdev_register - watchdog sysfs improvements - Other fixes and small improvements * tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits) watchdog: at91rm9200: Only warn once about problems in .remove() watchdog: mt7621-wdt: avoid ralink architecture dependent code watchdog: mt7621-wdt: avoid static global declarations dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers watchdog: sbsa_wdog: Make sure the timeout programming is within the limits dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible watchdog: report options in sysfs watchdog: report fw_version in sysfs dt-bindings: watchdog: fsl-imx: document suspend in wait mode watchdog: imx2_wdg: suspend watchdog in WAIT mode watchdog: pcwd_usb: Fix attempting to access uninitialized memory dt-bindings: watchdog: qcom-wdt: merge MSM timer dt-bindings: watchdog: qcom-wdt: allow interrupts dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615 dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles dt-bindings: watchdog: qcom-wdt: do not allow fallback alone dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019 watchdog: Fix kmemleak in watchdog_cdev_register watchdog: Include <linux/kstrtox.h> when appropriate watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path ...
2023-03-02watchdog: mt7621-wdt: avoid ralink architecture dependent codeSergio Paracuellos1-1/+3
MT7621 SoC has a system controller node. Watchdog need to access to reset status register. Ralink architecture and related driver are old and from the beggining they are using some architecture dependent operations for accessing this shared registers through 'asm/mach-ralink/ralink_regs.h' header file. However this is not ideal from a driver perspective which can just access to the system controller registers in an arch independent way using regmap syscon APIs. Update Kconfig accordingly to select new added dependencies and allow driver to be compile tested. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann1-5/+4
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-19watchdog: Add Advantech EC watchdog driverThomas Kastner1-0/+7
This patch adds the 'advantech_ec_wdt' kernel module which provides WDT support for Advantech platforms with ITE based Embedded Controller. Signed-off-by: Thomas Kastner <thomas.kastner@advantech.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Thomas Kastner <thomas.kastner@advantech.com> Link: https://lore.kernel.org/r/Y0+pl/26e3pcEUPk@EIS-S230 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-13Merge tag 'linux-watchdog-6.1-rc1' of ↵Linus Torvalds1-2/+13
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - new driver for Exar/MaxLinear XR28V38x - support for exynosautov9 SoC - support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC - support for imx93 - several other fixes and improvements * tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: twl4030_wdt: add missing mod_devicetable.h include dt-bindings: watchdog: migrate mt7621 text bindings to YAML watchdog: sp5100_tco: Add "action" module parameter watchdog: imx93: add watchdog timer on imx93 watchdog: imx7ulp_wdt: init wdog when it was active watchdog: imx7ulp_wdt: Handle wdog reconfigure failure watchdog: imx7ulp_wdt: Fix RCS timeout issue watchdog: imx7ulp_wdt: Check CMD32EN in wdog init watchdog: imx7ulp: Add explict memory barrier for unlock sequence watchdog: imx7ulp: Move suspend/resume to noirq phase watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt watchdog: s3c2410_wdt: support exynosautov9 watchdog dt-bindings: watchdog: add exynosautov9 compatible watchdog: npcm: Enable clock if provided watchdog: meson: keep running if already active watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema watchdog: armada_37xx_wdt: Fix .set_timeout callback watchdog: sa1100: make variable sa1100dog_driver static watchdog: w83977f_wdt: Fix comment typo ...
2022-10-10Merge tag 'powerpc-6.1-1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Remove our now never-true definitions for pgd_huge() and p4d_leaf(). - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit. - Add support for syscall wrappers. - Add support for KFENCE on 64-bit. - Update 64-bit HV KVM to use the new guest state entry/exit accounting API. - Support execute-only memory when using the Radix MMU (P9 or later). - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests. - Updates to our linker script to move more data into read-only sections. - Allow the VDSO to be randomised on 32-bit. - Many other small features and fixes. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng Yongjun. * tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) KVM: PPC: Book3S HV: Fix stack frame regs marker powerpc: Don't add __powerpc_ prefix to syscall entry points powerpc/64s/interrupt: Fix stack frame regs marker powerpc/64: Fix msr_check_and_set/clear MSR[EE] race powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN powerpc/pseries: Add firmware details to the hardware description powerpc/powernv: Add opal details to the hardware description powerpc: Add device-tree model to the hardware description powerpc/64: Add logical PVR to the hardware description powerpc: Add PVR & CPU name to hardware description powerpc: Add hardware description string powerpc/configs: Enable PPC_UV in powernv_defconfig powerpc/configs: Update config files for removed/renamed symbols powerpc/mm: Fix UBSAN warning reported on hugetlb powerpc/mm: Always update max/min_low_pfn in mem_topology_setup() powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range powerpc: Drops STABS_DEBUG from linker scripts powerpc/64s: Remove lost/old comment powerpc/64s: Remove old STAB comment powerpc: remove orphan systbl_chk.sh ...
2022-10-02watchdog: Exar/MaxLinear XR28V38x driverDavid Müller1-0/+11
Simple driver for the watchdog present in some Exar/MaxLinear UART chips. Please see https://www.maxlinear.com/product/interface/uarts/lpc-uarts/xr28v384 for more info. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220914094605.93377-1-d.mueller@elsoft.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog/hpwdt: Enable HP_WATCHDOG for ARM64 systems.Jerry Hoemann1-2/+2
Enable HP_WATCHDOG for ARM64 systems. HPWDT_NMI_DECODING requires X86 as NMI handlers are X86 specific. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220820202821.1263837-3-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-09-26watchdog: booke_wdt: Replace PPC_FSL_BOOK3E by PPC_E500Christophe Leroy1-4/+4
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Replace it so that CONFIG_PPC_FSL_BOOK3E can be removed later. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/01a9132d51d3d8d9c74576d3da4d9d1fa5a88bde.1663606876.git.christophe.leroy@csgroup.eu
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang1-1/+1
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c) Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-07Merge tag 'powerpc-6.0-1' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...
2022-07-20watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timersScott Cheloha1-0/+8
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires. This patch adds a watchdog driver for these timers, "pseries-wdt". pseries_wdt_probe() currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time. Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220713202335.1217647-5-cheloha@linux.ibm.com
2022-07-14watchdog: simatic-ipc-wdt: convert to use P2SB accessorHenning Schild1-0/+1
Since we have a common P2SB accessor in tree we may use it instead of open coded variants. Replace custom code by p2sb_bar() call. Signed-off-by: Henning Schild <henning.schild@siemens.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org>
2022-06-03Merge tag 'arm-late-5.19' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "This is the second part of the general SoC updates, containing everything that did not make it in the initial pull request, or that came in as a bugfix later. - Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including a new machine using an ASPEED BMC. - More DT fixes from Krzysztof Kozlowski across platforms - A new SoC platform for the GXP baseboard management controller, used in current server products from HPE" * tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits) ARM: configs: Enable more audio support for i.MX tee: optee: Pass a pointer to virt_addr_valid() arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 arm64: dts: sprd: use new 'dma-channels' property ARM: dts: da850: use new 'dma-channels' property ARM: dts: pxa: use new 'dma-channels/requests' properties soc: ixp4xx/qmgr: Fix unused match warning ARM: ep93xx: Make ts72xx_register_flash() static ARM: configs: enable support for Kontron KSwitch D10 ep93xx: clock: Do not return the address of the freed memory arm64: dts: intel: add device tree for n6000 ...
2022-05-21watchdog: Add Renesas RZ/N1 Watchdog driverPhil Edworthy1-0/+8
This is a driver for the standard WDT on the RZ/N1 devices. This WDT has very limited timeout capabilities. However, it can reset the device. To do so, the corresponding bits in the SysCtrl RSTEN register need to be enabled. This is not done by this driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220427135531.708279-3-jjhiblot@traphandler.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-18watchdog: hpe-wdt: Introduce HPE GXP WatchdogNick Hawkins1-0/+11
Add support for the HPE GXP Watchdog. The GXP asic contains a full complement of timers one of which is the watchdog timer. The watchdog timer is 16 bit and has 10ms resolution. The watchdog is created as a child device of timer since the same register range is used. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net>
2022-05-08watchdog: Add watchdog driver for Sunplus SP7021Xiantao Hu1-0/+11
Sunplus SP7021 requires watchdog timer support. Add watchdog driver to enable this. Signed-off-by: Xiantao Hu <xt.hu@cqplus1.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220324031805.61316-3-xt.hu@cqplus1.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-04-01Merge tag 'linux-watchdog-5.18-rc1' of ↵Linus Torvalds1-1/+1
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add support for BCM4908 - renesas_wdt: add R-Car Gen4 support - improve watchdog_dev function documentation - sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during initialization - several other small improvements and fixes * tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: Watchdog: sp5100_tco: Enable Family 17h+ CPUs Watchdog: sp5100_tco: Add initialization using EFCH MMIO Watchdog: sp5100_tco: Refactor MMIO base address initialization Watchdog: sp5100_tco: Move timer initialization into function watchdog: ixp4xx: Implement restart watchdog: orion_wdt: support pretimeout on Armada-XP watchdog: allow building BCM7038_WDT for BCM4908 watchdog: renesas_wdt: Add R-Car Gen4 support dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support watchdog: Improve watchdog_dev function documentation watchdog: aspeed: add nowayout support watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function watchdog: imx2_wdg: Alow ping on suspend
2022-03-27watchdog: allow building BCM7038_WDT for BCM4908Rafał Miłecki1-1/+1
BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx including the watchdog block. Allow building this driver for it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-07watchdog: max77620: Add support for the max77714 variantLuca Ceresoli1-1/+1
The MAX77714 is a MFD chip whose watchdog has the same programming procedures as the MAX77620 watchdog, but most register offsets and bit masks are different, as well as some features. Support the MAX77714 watchdog by adding a variant description table holding the differences. All the features implemented by this driver are available on the MAX77714 except for the lack of a WDTOFFC bit. Instead of using a "HAS_*" flag we handle this by holding in the cnfg_glbl2_cfg_bits struct field the bits (i.e. the features) to enable in the CNFG_GLBL2 register. These bits differ among the two models. This implementation allows to avoid any conditional code, keeping the execution flow unchanged. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-01MIPS: Remove TX39XX supportThomas Bogendoerfer1-1/+1
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2022-01-17Merge tag 'linux-watchdog-5.17-rc1' of ↵Linus Torvalds1-36/+62
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - New device support: - Watchdog Timer driver for RZ/G2L - Realtek Otto watchdog timer - Apple SoC watchdog driver - Fintek F81966 - Remove BCM63XX_WDT after support for this SoC was added to BCM7038_WDT - Improvements of the BCM7038_WDT and s3c2410_wdt code - Several other fixes and improvements * tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits) watchdog: msc313e: Check if the WDT was running at boot watchdog: Add Apple SoC watchdog driver dt-bindings: watchdog: Add SM6350 and SM8250 compatible watchdog: s3c2410: Fix getting the optional clock watchdog: s3c2410: Use platform_get_irq() to get the interrupt dt-bindings: watchdog: atmel: Add missing 'interrupts' property watchdog: mtk_wdt: use platform_get_irq_optional watchdog: Add Watchdog Timer driver for RZ/G2L dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L watchdog: da9063: Add hard dependency on I2C watchdog: Add Realtek Otto watchdog timer dt-bindings: watchdog: Realtek Otto WDT binding watchdog: s3c2410: Add Exynos850 support watchdog: da9063: use atomic safe i2c transfer in reset handler watchdog: davinci: Use div64_ul instead of do_div watchdog: Remove BCM63XX_WDT MIPS: BCM63XX: Provide platform data to watchdog device watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt watchdog: Allow building BCM7038_WDT for BCM63XX watchdog: bcm7038_wdt: Support platform data configuration ...
2022-01-05watchdog: Add Apple SoC watchdog driverSven Peter1-0/+12
Add support for the watchdog timer found in Apple SoCs. This driver is also required to reboot these machines. Signed-off-by: Sven Peter <sven@svenpeter.dev> Tested-by: Janne Grunau <j@jannau.net> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211211123633.4392-2-sven@svenpeter.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: Add Watchdog Timer driver for RZ/G2LBiju Das1-0/+8
Add Watchdog Timer driver for RZ/G2L SoC. WDT IP block supports normal watchdog timer function and reset request function due to CPU parity error. This driver currently supports normal watchdog timer function and later will add support for reset request function due to CPU parity error. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: da9063: Add hard dependency on I2CAndrej Picej1-0/+1
Commit 5ea29919c294 ("watchdog: da9063: use atomic safe i2c transfer in reset handler") implements atomic save i2c transfer which uses i2c functions directly. Add I2C hard dependency which overrides COMPILE_TEST. Reported-by: kernel test robot <lkp@intel.com> Fixes: 968011a291f3 ("watchdog: da9063: use atomic safe i2c transfer in reset handler") Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211129134938.3273289-1-andrej.picej@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-01-05watchdog: Add Realtek Otto watchdog timerSander Vanheule1-0/+13
Realtek MIPS SoCs (platform name Otto) have a watchdog timer with pretimeout notifitication support. The WDT can (partially) hard reset, or soft reset the SoC. This driver implements all features as described in the devicetree binding, except the phase2 interrupt, and also functions as a restart handler. The cpu reset mode is considered to be a "warm" restart, since this mode does not reset all peripherals. Being an embedded system though, the "cpu" and "software" modes will still cause the bootloader to run on restart. It is not known how a forced system reset can be disabled on the supported platforms. This means that the phase2 interrupt will only fire at the same time as reset, so implementing phase2 is of little use. Signed-off-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Remove BCM63XX_WDTFlorian Fainelli1-10/+0
Now that we can utilize the BCM7038_WDT driver, remove that one which was not converted to the watchdog APIs. There are a couple of notable differences with how the bcm7038_wdt driver proceeds: - bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API, but this would only be used in order to catch the interrupt *before* a SoC reset and make the kernel "die" - bcm6xx_wdt would register a software timer and kick it every second in order to pet the watchdog, thus offering a two step watchdog process. This is not something that is brought over to the bcm7038_wdt as it is deemed unnecessary. If user-space cannot pet the watchdog, but a kernel timer can, the system is still in a bad shape anyway. bcm7038_wdt is simpler in its behavior and behaves as a standard watchdog driver and is not making use of any specific platform APIs, therefore making it more maintainable and extensible. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211112224636.395101-8-f.fainelli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Allow building BCM7038_WDT for BCM63XXFlorian Fainelli1-3/+4
CONFIG_BCM63XX denotes the legacy MIPS-based DSL SoCs which utilize the same piece of hardware as a watchdog, make it possible to select that driver for those platforms. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211112224636.395101-5-f.fainelli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Kconfig: fix help text indentationLuca Ceresoli1-24/+24
Some entries indent their help text with 1 tab + 1 space or 1 tab only instead of 1 tab + 2 spaces. Add the missing spaces. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211111225852.3128201-7-luca@lucaceresoli.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-28watchdog: Kconfig: enable MTK watchdogKevin Hilman1-0/+1
Enable CONFIG_MEDIATEK_WATCHDOG when ARCH_MEDIATEK is enabled. On some platforms (e.g. mt8183-pumpkin), watchdog is enabled by bootloader, so kernel driver needs to be enabled to avoid watchdog firing and causing reboot part way through kernel boot. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211103230354.915658-1-khilman@baylibre.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-12-23watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCsHenning Schild1-0/+11
This driver adds initial support for several devices from Siemens. It is based on a platform driver introduced in an earlier commit. One of the supported machines does access a GPIO pin to enable the watchdog. Here we poke GPIO memory because pinctrl does not come up. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211213120502.20661-4-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-11-01watchdog: db8500_wdt: Rename driverLinus Walleij1-4/+4
This driver is named after the ambition to support more SoCs than the DB8500. Those were never produced, so cut down the scope and rename the driver accordingly. Since the Kconfig for the watchdog defaults to y this will still be built by default. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210922230947.1864357-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: s3c2410: describe driver in KConfigKrzysztof Kozlowski1-3/+5
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210924132930.111443-1-krzysztof.kozlowski@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26ar7: fix kernel builds for compiler testJackie Liu1-1/+1
TI AR7 Watchdog Timer is only build for 32bit. Avoid error like: In file included from drivers/watchdog/ar7_wdt.c:29: ./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’: ./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration] 111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == | ^~~~~~~~~ | CKSEG1ADDR Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210907024904.4127611-1-liu.yun@linux.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: f71808e_wdt: migrate to new kernel watchdog APIAhmad Fatoum1-0/+1
Migrating the driver lets us drop the watchdog misc device boilerplate and reduces size by 285 lines. It also brings us support for new functionality like CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED. This incurs a slight backwards-compatibility break, because the new kernel watchdog API doesn't support unloading modules for drivers whose watchdog hardware is reported to be running. This means following scenario will be no longer supported: - BIOS has enabled watchdog - Module is loaded and unloaded without opening watchdog - module_exit is expected to succeed and disable watchdog HW Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/35d9dbf57b58c5f003cef31dc256ec2fec044524.1628525954.git-series.a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: remove dead iop watchdog timer driverLukas Bulwahn1-16/+0
Commit 59d3ae9a5bf6 ("ARM: remove Intel iop33x and iop13xx support") removes the config ARCH_IOP13XX in ./arch/arm/Kconfig. Hence, since then, the corresponding iop watchdog timer driver is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-09-27watchdog/sb_watchdog: fix compilation problem due to COMPILE_TESTJackie Liu1-1/+1
Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES. In arch/mips/sibyte/Platform like: cflags-$(CONFIG_SIBYTE_BCM112X) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL. SIBYTE_HDR_FMASK_ALL is mean: #define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ | SIBYTE_HDR_FMASK_1480_ALL) So, If not limited to CPU_SB1, we will get such an error: arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror] arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror] Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-22watchdog: ixp4xx: Rewrite driver to use coreLinus Walleij1-0/+1
This rewrites the IXP4xx watchdog driver as follows: - Spawn the watchdog driver as a platform device from the timer driver. It's one device in the hardware, and the fact that Linux splits the handling into two different devices is a Linux pecularity, and thus it becomes a Linux pecularity to spawn a separate watchdog driver. - Spawn the watchdog driver from the timer driver at probe(). This is well after the timer driver as actually registered and started and we know the register base is available. - Instead of looping back callbacks to the timer drivers for all watchdog calls, pass the register base to the watchdog driver and manage the registers there. The two drivers aren't even interested in the same register so the spinlock is totally surplus, delete it. - Replace pretty much all of the content in the watchdog driver with a simple, modern watchdog driver utilizing the watchdog core instead of registering its own misc device and ioctl() handling. - Drop module parameters as the same already exist in the watchdog core. What remains is a slim elegant (IMO) watchdog driver using the watchdog core, spawning from device tree or boardfile alike. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210726121214.2572836-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-08-22watchdog: bd70528 drop bd70528 supportMatti Vaittinen1-12/+0
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/994d2e374262c3f59f4465c03ef23d3116120778.1621937490.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Add Mstar MSC313e WDT driverDaniel Palmer1-0/+12
It adds a driver for the IP block handling the watchdog timer found for Mstar MSC313e SoCs and newer. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Co-developed-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210611200801.52139-3-romain.perier@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Add hrtimer-based pretimeout featureCurtis Klein1-0/+8
This adds the option to use a hrtimer to generate a watchdog pretimeout event for hardware watchdogs that do not natively support watchdog pretimeouts. With this enabled, all watchdogs will appear to have pretimeout support in userspace. If no pretimeout value is set, there will be no change in the watchdog's behavior. If a pretimeout value is set for a specific watchdog that does not have built-in pretimeout support, a timer will be started that should fire at the specified time before the watchdog timeout would occur. When the watchdog is successfully pinged, the timer will be restarted. If the timer is allowed to fire it will generate a pretimeout event. However because a software timer is used, it may not be able to fire in every circumstance. If the watchdog does support a pretimeout natively, that functionality will be used instead of the hrtimer. The general design of this feaure was inspired by the software watchdog, specifically its own pretimeout implementation. However the software watchdog and this feature are completely independent. They can be used together; with or without CONFIG_SOFT_WATCHDOG_PRETIMEOUT enabled. The main advantage of using the hrtimer pretimeout with a hardware watchdog, compared to running the software watchdog with a hardware watchdog, is that if the hardware watchdog driver is unable to ping the watchdog (e.g. due to a bus or communication error), then the hrtimer pretimeout would still fire whereas the software watchdog would not. Signed-off-by: Curtis Klein <curtis.klein@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1612383090-27110-1-git-send-email-curtis.klein@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Remove MV64x60 watchdog driverChristophe Leroy1-4/+0
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") removed the last selector of CONFIG_MV64X60. Therefore CONFIG_MV64X60_WDT cannot be selected anymore and can be removed. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/9c2952bcfaec3b1789909eaa36bbce2afbfab7ab.1616085654.git.christophe.leroy@csgroup.eu Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: Fix a typo in KconfigWong Vee Khee1-1/+1
s/thershold/threshold Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210401033209.9929-1-vee.khee.wong@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-06-21watchdog: clean up the Kconfig fileRandy Dunlap1-23/+28
Change a non-working ftp: URL to https:. Wrap long lines earlier. Spell "IP" with capital letters. Change "it`s" to "it's". The backtick (grave accent) is not an apostrophe. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210419000704.17745-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-03-10wdt: Support wdt on ROHM BD9576MUF and BD9573MUFMatti Vaittinen1-0/+13
Add Watchdog support for ROHM BD9576MUF and BD9573MUF PMICs which are mainly used to power the R-Car series processors. The watchdog is pinged using a GPIO and enabled using another GPIO. Additionally watchdog time-out can be configured to HW prior starting the watchdog. Watchdog timeout can be configured to detect only delayed ping or in a window mode where also too fast pings are detected. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-22Merge tag 'linux-watchdog-5.12-rc1' of ↵Linus Torvalds1-52/+13
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: "New drivers: - Intel Keembay Soc New chip versions: - sun4i: Add H616 compatible string - mt8192 wdt support - more Rockchip compatibles to snps,dw-wdt.yaml - binding for Qcom SDX55 - r8a779a0 (V3U) support Removed drivers: - sirf prima watchdog driver - sirf atlas watchdog driver - zte zx watchdog driver - tango watchdog driver - coh901 watchdog driver And several fixes and clean-ups" * tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ watchdog: mei_wdt: request stop on unregister dt-bindings: watchdog: Add binding for Qcom SDX55 watchdog: remove coh901 driver watchdog: remove tango driver watchdog: remove zte zx driver watchdog: remove sirf atlas driver watchdog: remove sirf prima driver watchdog: mt8192: add wdt support dt-binding: mt8192: add toprgu reset-controller head file dt-binding: mediatek: mt8192: update mtk-wdt document dt-binding: mediatek: watchdog: fix the description of compatible dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml dt-bindings: watchdog: sun4i: Add H616 compatible string watchdog: mtk_wdt: Remove mtk_wdt_stop() in probe() to prevent the system freeze and it doesn't reboot by watchdog problem watchdog: renesas_wdt: add grace period before rebooting watchdog: stop wdd when watchdog hw running in reboot_notifier watchdog: ziirave_wdt: remove unused including <linux/version.h> dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support watchdog: renesas_wdt: don't sleep in atomic context ...
2021-02-07watchdog: remove coh901 driverArnd Bergmann1-11/+0
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210120162745.61268-6-arnd@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-02-07watchdog: remove tango driverArnd Bergmann1-11/+0
The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20210120162745.61268-5-arnd@kernel.org [groeck: Removed devicetree bindings] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-26 23:59:27 +0300