summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-8/+2
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-21Merge tag 'linux-watchdog-5.10-rc1' of ↵Linus Torvalds14-48/+320
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Toshiba Visconti watchdog driver - it87_wdt: add IT8772 + IT8784 - several fixes and improvements * tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Add Toshiba Visconti watchdog driver watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: it87_wdt: add IT8784 ID watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3 watchdog: renesas_wdt: support handover from bootloader watchdog: imx7ulp: Watchdog should continue running for wait/stop mode watchdog: rti: Simplify with dev_err_probe() watchdog: davinci: Simplify with dev_err_probe() watchdog: cadence: Simplify with dev_err_probe() watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h> watchdog: Use put_device on error watchdog: Fix memleak in watchdog_cdev_register watchdog: imx7ulp: Strictly follow the sequence for wdog operations watchdog: it87_wdt: add IT8772 ID watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed drivers: watchdog: rdc321x_wdt: Fix race condition bugs
2020-10-15Merge tag 'mfd-next-5.10' of ↵Linus Torvalds3-0/+241
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-14watchdog: Add Toshiba Visconti watchdog driverNobuhiro Iwamatsu3-0/+204
Add the watchdog driver for Toshiba Visconti series. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201005023012.603026-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: it87_wdt: add IT8784 IDHanspeter Portner1-1/+3
IT8784 watchdog works as in IT878x Tested on SHAREVDY K10 board. Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200904211639.18787-2-dev@open-music-kontrollers.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabledGuenter Roeck1-0/+18
On Family 17h (Ryzen) devices, the WatchdogTmrEn bit of PmDecodeEn not only enables watchdog memory decoding at 0xfeb00000, it also enables the watchdog hardware itself. Use this information to enable the watchdog if it is not already enabled. Cc: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/20200910163109.235136-2-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3Guenter Roeck1-1/+1
EFCH_PM_DECODEEN3 is supposed to access DECODEEN register bits 24..31, in other words the register at byte offset 3. Cc: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 887d2ec51e34b ("watchdog: sp5100_tco: Add support for recent FCH versions") Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/20200910163109.235136-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: renesas_wdt: support handover from bootloaderWolfram Sang1-2/+10
Support an already running watchdog by checking its enable bit and set up the status accordingly before registering the device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200908095615.31376-1-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: imx7ulp: Watchdog should continue running for wait/stop modeAnson Huang1-1/+4
When kernel idle, system will enter wait/stop mode, wdog should continue running in this scenario, and the refresh thread can wake up system from wait/stop mode. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1596150213-31638-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: rti: Simplify with dev_err_probe()Krzysztof Kozlowski1-10/+4
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200901153141.18960-3-krzk@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: davinci: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200901153141.18960-2-krzk@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: cadence: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200901153141.18960-1-krzk@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>Zhen Lei1-2/+0
There has been no reference to "struct sched_param" since commit 94beddacb53c ("sched,watchdog: Convert to sched_set_fifo()"), so there's no need to include <uapi/linux/sched/types.h> any more, delete it. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200827062154.1847-1-thunder.leizhen@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: Use put_device on errorDinghao Liu1-1/+1
We should use put_device() instead of freeing device directly after device_initialize(). Fixes: cb36e29bb0e4b ("watchdog: initialize device before misc_register") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200824031230.31050-1-dinghao.liu@zju.edu.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: Fix memleak in watchdog_cdev_registerDinghao Liu1-1/+3
When watchdog_kworker is NULL, we should free wd_data before the function returns to prevent memleak. Fixes: 664a39236e718 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200824024001.25474-1-dinghao.liu@zju.edu.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: imx7ulp: Strictly follow the sequence for wdog operationsAnson Huang1-13/+61
According to reference manual, the i.MX7ULP WDOG's operations except refresh should follow below sequence: 1. disable global interrupts; 2. unlock the wdog and wait unlock bit set; 3. reconfigure the wdog and wait for reconfiguration bit set; 4. enabel global interrupts. Strictly follow the recommended sequence can make it more robust. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1596150213-31638-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: it87_wdt: add IT8772 IDHanspeter Portner1-1/+3
IT8772 watchdog works as in IT872x Tested on SHAREVDI K6-F12 board. Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200827105940.2835910-1-hanspeter.portner@livesystems.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not neededChristophe JAILLET1-1/+1
There is no need to use GFP_ATOMIC here. It is a probe function, no spinlock is taken and GFP_KERNEL is used just before and just after this 'usb_alloc_coherent()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200809071912.742836-1-christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-10-14drivers: watchdog: rdc321x_wdt: Fix race condition bugsMadhuparna Bhowmik1-3/+2
In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized after misc_register(), hence if ioctl is called before its initialization which can call rdc321x_wdt_start() function, it will see an uninitialized value of rdc321x_wdt_device.queue, hence initialize it before misc_register(). Also, rdc321x_wdt_device.default_ticks is accessed in reset() function called from write callback, thus initialize it before misc_register(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200807112902.28764-1-madhuparnabhowmik10@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-09-17watchdog: add support for sl28cpld watchdogMichael Walle3-0/+241
Add support for the watchdog of the sl28cpld board management controller. This is part of a multi-function device driver. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson1-8/+2
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-19ARM: samsung: remove HAVE_S3C2410_WATCHDOG and use direct dependenciesKrzysztof Kozlowski1-8/+2
A separate Kconfig option HAVE_S3C2410_WATCHDOG for Samsung SoCs is not really needed and the s3c24xx watchdog driver can depend on Samsung ARM architectures instead. The "HAVE_xxx_WATCHDOG" pattern of dependency is not popular and Samsung platforms are here exceptions. All others just depend on CONFIG_ARCH_xxx. This makes the code slightly smaller without any change in functionality. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2020-08-12Merge tag 'linux-watchdog-5.9-rc1' of ↵Linus Torvalds49-153/+755
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - f71808e_wdt imporvements - dw_wdt improvements - mlx-wdt: support new watchdog type with longer timeout period - fallthrough pseudo-keyword replacements - overall small fixes and improvements * tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: rti-wdt: balance pm runtime enable calls watchdog: rti-wdt: attach to running watchdog during probe watchdog: add support for adjusting last known HW keepalive time watchdog: use __watchdog_ping in startup watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot' watchdog: pcwd_usb: remove needless check before usb_free_coherent() watchdog: Replace HTTP links with HTTPS ones dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support watchdog: initialize device before misc_register watchdog: booke_wdt: Add common nowayout parameter driver watchdog: scx200_wdt: Use fallthrough pseudo-keyword watchdog: Use fallthrough pseudo-keyword watchdog: f71808e_wdt: do stricter parameter validation watchdog: f71808e_wdt: clear watchdog timeout occurred flag watchdog: f71808e_wdt: remove use of wrong watchdog_info option watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options docs: watchdog: codify ident.options as superset of possible status flags dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150 dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML watchdog: dw_wdt: Add DebugFS files ...
2020-08-05watchdog: rti-wdt: balance pm runtime enable callsTero Kristo1-0/+2
PM runtime should be disabled in the fail path of probe and when the driver is removed. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717132958.14304-5-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: rti-wdt: attach to running watchdog during probeTero Kristo1-10/+102
If the RTI watchdog is running already during probe, the driver must configure itself to match the HW. Window size and timeout is probed from hardware, and the last keepalive ping is adjusted to match it also. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717132958.14304-4-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: add support for adjusting last known HW keepalive timeTero Kristo1-0/+30
Certain watchdogs require the watchdog only to be pinged within a specific time window, pinging too early or too late cause the watchdog to fire. In cases where this sort of watchdog has been started before kernel comes up, we must adjust the watchdog keepalive window to match the actually running timer, so add a new driver API for this purpose. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717132958.14304-3-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: use __watchdog_ping in startupTero Kristo1-8/+11
Current watchdog startup functionality does not respect the minimum hw heartbeat setup and the last watchdog ping timeframe when watchdog is already running and userspace process attaches to it. Fix this by using the __watchdog_ping from the startup also. For this code path, we can also let the __watchdog_ping handle the bookkeeping for the worker and last keepalive times. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717132958.14304-2-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot'Woody Lin1-0/+57
Add module parameters 'soft_reboot_cmd' and 'soft_active_on_boot' for customizing softdog configuration; config reboot command by assigning soft_reboot_cmd, and set soft_active_on_boot to start up softdog timer at module initialization stage. Signed-off-by: Woody Lin <woodylin@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200708083218.3157213-1-woodylin@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: pcwd_usb: remove needless check before usb_free_coherent()Xu Wang1-3/+2
usb_free_coherent() is safe with NULL usb_pcwd->intr_buffer and this check is not required. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200713055348.21620-1-vulab@iscas.ac.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: Replace HTTP links with HTTPS onesAlexander A. Klimov5-5/+5
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200713205821.38223-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: initialize device before misc_registerKrzysztof Sobota1-9/+9
When watchdog device is being registered, it calls misc_register that makes watchdog available for systemd to open. This is a data race scenario, because when device is open it may still have device struct not initialized - this in turn causes a crash. This patch moves device initialization before misc_register call and it solves the problem printed below. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54 kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54) [<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb105513974f ]--- ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54 refcount_t: increment on 0; use-after-free. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54) [<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb1055139750 ]--- Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com> Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: booke_wdt: Add common nowayout parameter driverTimothy Myers1-1/+5
Add the common "nowayout" parameter to booke_wdt to make this behavior selectable at runtime and to make the implementation more consistent with many other watchdog drivers. Signed-off-by: Timothy Myers <timothy.myers@adtran.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [groeck: Dropped version data, cleaned up subject line] Link: https://lore.kernel.org/r/CH2PR19MB359059AA5C8917D8D24633FF9D690@CH2PR19MB3590.namprd19.prod.outlook.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: scx200_wdt: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7-rc7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717164059.GA26947@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: Use fallthrough pseudo-keywordGustavo A. R. Silva38-40/+39
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200707171121.GA13472@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: f71808e_wdt: do stricter parameter validationAhmad Fatoum1-25/+12
We check the f71862fg_pin module parameter every time a watchdog device for the f71862fg is opened, but the parameter can't change at runtime. If we move the check to the start of init: - We catch userspace passing invalid, but unused, values - We check the condition only once - We simplify the code Do so. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-6-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: f71808e_wdt: clear watchdog timeout occurred flagAhmad Fatoum1-0/+7
The flag indicating a watchdog timeout having occurred normally persists till Power-On Reset of the Fintek Super I/O chip. The user can clear it by writing a `1' to the bit. The driver doesn't offer a restart method, so regular system reboot might not reset the Super I/O and if the watchdog isn't enabled, we won't touch the register containing the bit on the next boot. In this case all subsequent regular reboots will be wrongly flagged by the driver as being caused by the watchdog. Fix this by having the flag cleared after read. This is also done by other drivers like those for the i6300esb and mpc8xxx_wdt. Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-5-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: f71808e_wdt: remove use of wrong watchdog_info optionAhmad Fatoum1-2/+1
The flags that should be or-ed into the watchdog_info.options by drivers all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the driver's watchdog_ops has a usable set_timeout. WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which equals: WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY | WDIOF_MAGICCLOSE | 0xc0045000 These were so far indicated to userspace on WDIOC_GETSUPPORT. As the driver has not yet been migrated to the new watchdog kernel API, the constant can just be dropped without substitute. Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-4-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.optionsAhmad Fatoum1-1/+2
The driver supports populating bootstatus with WDIOF_CARDRESET, but so far userspace couldn't portably determine whether absence of this flag meant no watchdog reset or no driver support. Or-in the bit to fix this. Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-3-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Add DebugFS filesSerge Semin1-0/+68
For the sake of the easier device-driver debug procedure, we added a DebugFS file with the controller registers state. It's available only if kernel is configured with DebugFS support. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Add pre-timeouts supportSerge Semin1-8/+130
DW Watchdog can rise an interrupt in case if IRQ request mode is enabled and timer reaches the zero value. In this case the IRQ lane is left pending until either the next watchdog kick event (watchdog restart) or until the WDT_EOI register is read or the device/system reset. This interface can be used to implement the pre-timeout functionality optionally provided by the Linux kernel watchdog devices. IRQ mode provides a two stages timeout interface. It means the IRQ is raised when the counter reaches zero, while the system reset occurs only after subsequent timeout if the timer restart is not performed. Due to this peculiarity the pre-timeout value is actually set to the achieved hardware timeout, while the real watchdog timeout is considered to be twice as much of it. This applies a significant limitation on the pre-timeout values, so current implementation supports either zero value, which disables the pre-timeout events, or non-zero values, which imply the pre-timeout to be at least half of the current watchdog timeout. Note that we ask the interrupt controller to detect the rising-edge pre-timeout interrupts to prevent the high-level-IRQs flood, since if the pre-timeout happens, the IRQ lane will be left pending until it's cleared by the timer restart. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Support devices with asynch clocksSerge Semin1-5/+43
DW Watchdog IP core can be synthesised with asynchronous timer/APB clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case separate clock signals are supposed to be used to feed watchdog timer and APB interface of the device. Currently the driver supports the synchronous mode only. Since there is no way to determine which mode was actually activated for device from its registers, we have to rely on the platform device configuration data. If optional "pclk" clock source is supplied, we consider the device working in asynchronous mode, otherwise the driver falls back to the synchronous configuration. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Support devices with non-fixed TOP valuesSerge Semin1-24/+167
In case if the DW Watchdog IP core is synthesised with WDT_USE_FIX_TOP == false, the TOP interval indexes make the device to load a custom periods to the counter. These periods are hardwired at the IP synthesis stage and can be within [2^8, 2^(WDT_CNT_WIDTH - 1)]. Alas their values can't be detected at runtime and must be somehow supplied to the driver so one could properly determine the watchdog timeout intervals. For this purpose we suggest to have a vendor- specific dts property "snps,watchdog-tops" utilized, which would provide an array of sixteen counter values. At device probe stage they will be used to initialize the watchdog device timeouts determined from the array values and current clocks source rate. In order to have custom TOP values supported the driver must be altered in the following way. First of all the fixed-top values ready-to-use array must be determined for compatibility with currently supported devices, which were synthesised with WDT_USE_FIX_TOP == true. It will be used if either fixed TOP feature is detected being enabled or no custom TOPs are fetched from the device dt node. Secondly at the probe stage we must initialize an array of the watchdog timeouts corresponding to the detected TOPs list and the reference clock rate. For generality the procedure of initialization is designed in a way to support the TOPs array with no limitations on the items order or value. Finally the watchdog period search methods should be altered to support the new timeouts data structure. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: Use kobj_to_dev() APIWang Qing1-1/+1
Use kobj_to_dev() API instead of container_of(). Signed-off-by: Wang Qing <wangqing@vivo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1591945384-14587-1-git-send-email-wangqing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: bcm_kona_wdt: Use correct return value for bcm_kona_wdt_probe()Tiezhu Yang1-1/+1
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1590391864-308-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: sunxi_wdt: fix improper error exit codeMartin Wu1-1/+1
sunxi_wdt_probe() should return -ENOMEM when devm_kzalloc() fails. Signed-off-by: Martin Wu <wuyan@allwinnertech.com> Signed-off-by: Frank Lee <frank@allwinnertech.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200529094514.26374-1-frank@allwinnertech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: test_bit() => watchdog_active()Bumsik Kim1-1/+1
Use the dedicated function watchdog_active() instead of the generic test_bit() function. It is done using the following Coccinelle script: @@ identifier wdd; @@ - test_bit(WDOG_ACTIVE, &wdd->status) + watchdog_active(wdd) Signed-off-by: Bumsik Kim <k.bumsik@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200529012428.84684-1-k.bumsik@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: mlx-wdt: support new watchdog type with longer timeout periodMichael Shych1-11/+62
New programmable logic device can have watchdog type 3 implementation. It's same as Type 2 with extended maximum timeout period. Maximum timeout is up-to 65535 sec. Type 3 HW watchdog implementation can exist on all Mellanox systems. It is differentiated by WD capability bit. Signed-off-by: Michael Shych <michaelsh@mellanox.com> Reviewed-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200504141427.17685-4-michaelsh@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-06-15sched,watchdog: Convert to sched_set_fifo()Peter Zijlstra1-2/+1
Because SCHED_FIFO is a broken scheduler model (see previous patches) take away the priority field, the kernel can't possibly make an informed decision. Effectively changes prio from 99 to 50. Cc: wim@linux-watchdog.org Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-40/+40
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>