summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+9
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-13Merge tag 'linux-watchdog-5.2-rc1' of ↵Linus Torvalds97-1537/+1465
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - a new watchdog driver for the ROHM BD70528 watchdog block - a new watchdog driver for the i.MX system controller watchdog - conversions to use device managed functions and other improvements - refactor watchdog_init_timeout - make watchdog core configurable as module - pretimeout governors improvements - a lot of other fixes * tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: (114 commits) watchdog: Enforce that at least one pretimeout governor is enabled watchdog: stm32: add dynamic prescaler support watchdog: Improve Kconfig entry ordering and dependencies watchdog: npcm: Enable modular builds watchdog: Make watchdog core configurable as module watchdog: Move pretimeout governor configuration up watchdog: Use depends instead of select for pretimeout governors watchdog: rtd119x: drop unused module.h include watchdog: intel_scu: make it explicitly non-modular watchdog: coh901327: make it explicitly non-modular watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeout watchdog: xen_wdt: drop warning after calling watchdog_init_timeout watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeout watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeout watchdog: sp5100_tco: drop warning after calling watchdog_init_timeout watchdog: renesas_wdt: drop warning after calling watchdog_init_timeout watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeout watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeout watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeout watchdog: i6300esb: drop warning after calling watchdog_init_timeout ...
2019-05-08watchdog: Enforce that at least one pretimeout governor is enabledGuenter Roeck1-0/+6
Since commit "watchdog: Use depends instead of select for pretimeout governors", it was possible to enable pretimeout governors but keep all of them disabled. Doing this results in the following build failure. ../drivers/watchdog/watchdog_pretimeout.c: In function ‘watchdog_register_governor’: ../drivers/watchdog/watchdog_pretimeout.c:139:26: error: ‘WATCHDOG_PRETIMEOUT_DEFAULT_GOV’ undeclared if (!strncmp(gov->name, WATCHDOG_PRETIMEOUT_DEFAULT_GOV, Since it does not make sense to enable pretimeout support but disable all pretimeout governors, enforce that at least one of them is always enabled. Fixes: f627ac0e12cd ("watchdog: Use depends instead of select for pretimeout governors") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds59-65/+65
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov59-65/+65
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-05watchdog: stm32: add dynamic prescaler supportLudovic Barre1-37/+47
This patch allows to define the max prescaler by compatible. To set a large range of timeout, the prescaler should be set dynamically (from the timeout request) to improve the resolution in order to have a timeout close to the expected value. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: Improve Kconfig entry ordering and dependenciesGuenter Roeck1-10/+10
HPWDT_NMI_DECODING depends on HP_WATCHDOG and should be next to it. This helps menuconfig identify HPWDT_NMI_DECODING as depending on HP_WATCHDOG. BCM_KONA_WDT_DEBUG depends on BCM_KONA_WDT which depends on COMPILE_TEST. Enabling BCM_KONA_WDT_DEBUG without BCM_KONA_WDT does not make sense, so drop the COMPILE_TEST dependency from it. This also improves menuconfig, which now properly associates BCM_KONA_WDT_DEBUG with BCM_KONA_WDT. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: npcm: Enable modular buildsGuenter Roeck1-1/+1
Most of the NPCM7XX drivers can be built as modules. The NPCM7XX watchdog driver code supports building it as module, but its configuration option is set to bool. Make itr tristate to actually support modular builds. This improves consistency with other drivers for the same platform and enables including the driver in multi- platform configurations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: Make watchdog core configurable as moduleGuenter Roeck1-1/+3
Under some circumstances it may be desirable to configure the watchdog core as module. Enable it. As part of this change, mark pretimeout governors as depending on the watchdog core. This is necessary to prevent governors from being built into the kernel if the watchdog core is built as module. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: Move pretimeout governor configuration upGuenter Roeck1-52/+52
Watchdog pretimeout configuration was at the end of the Kconfig file, after individual watchdog drivers, and thus easy to miss. Move it right after basic watchdog option declarations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: Use depends instead of select for pretimeout governorsGuenter Roeck1-14/+16
Watchdog pretimeout governors were enabled from the default governor selection using "select". As a result, the default governor was always built into the kernel, even if no watchdog driver was loaded. By using "depends on" instead of "select", we are in better control, and the governors can all be built as modules. At the same time, set the default configuration option for pretimeout governors to match WATCHDOG_CORE (meaning all pretimeout governors are by default enabled if pretimeout support is enabled). The practical impact of this change is minimal. Previously, selecting a default governor automatically enabled that governor. Now, a default governor can only be selected if that governor has been enabled. Consequently, the order of governor selection is now reversed: The governor selection is now first, followed by default governor selection. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: rtd119x: drop unused module.h includePaul Gortmaker1-1/+0
The Kconfig for this driver is: config RTD119X_WATCHDOG bool "Realtek RTD118x/RTD129x watchdog support" ...and hence it doesn't need to include module.h for anything. There are no other signs of unused modular infrastructure. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: intel_scu: make it explicitly non-modularPaul Gortmaker1-18/+0
The Kconfig currently controlling compilation of this code is: config INTEL_SCU_WATCHDOG bool "Intel SCU Watchdog for Mobile Platforms" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We leave the moduleparam.h include since the file does declare some module parameters, and leaving them as such is currently the easiest way to remain compatible with existing boot arg use cases. Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: coh901327: make it explicitly non-modularPaul Gortmaker1-20/+4
The Kconfig currently controlling compilation of this code is: config COH901327_WATCHDOG bool "ST-Ericsson COH 901 327 watchdog" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_ALIAS is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We replace module.h with moduleparam.h since the file does actually declare some module parameters (i.e. boot args for non-modules). Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-5/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: xen_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-3/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeoutWolfram Sang1-4/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-3/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: sp5100_tco: drop warning after calling watchdog_init_timeoutWolfram Sang1-3/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: renesas_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-3/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-4/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-3/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-4/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: i6300esb: drop warning after calling watchdog_init_timeoutWolfram Sang1-4/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: hpwdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-2/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: ebc-c384_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-4/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: cadence_wdt: still probe if user supplied timeout is invalidWolfram Sang1-4/+1
We have a default timeout value in the driver which we will fall back to if the user supplied values are out of bounce. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: cadence_wdt: drop warning after calling watchdog_init_timeoutWolfram Sang1-3/+1
The core will print out details now. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: add error messages when initializing timeout failsWolfram Sang1-0/+9
This not only removes boilerplate code from watchdog drivers, it can also be more specific which of the supplied value actually fails. Also, the loglevel becomes now consistent across drivers. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: refactor watchdog_init_timeoutWolfram Sang1-14/+19
The function is not easy to read and has a problem: -EINVAL is returned when the module parameter is invalid but the DT parameter is OK. Refactor the code to have the same pattern of checks for the module parameter and DT. Further ones can be easily added in the future if the need arises. The above mentioned problem is fixed, too. Some documentation is added to describe the different handlings of '0' for the module parameter and the DT property. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: renesas_wdt: drop superfluous glob patternWolfram Sang1-1/+0
If we want to match all revisions, it is enough to leave the field empty. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: da9063_wdt: parse DT for timeout value, tooWolfram Sang1-4/+6
And make sure the final obtained value gets properly scaled. Remove two empty lines to group the initialization blocks while we are here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: intel_scu_watchdog: fix spelling mistake: "set_hearbeat" -> ↵Colin Ian King1-1/+1
"set_heartbeat" There is a spelling mistake in a pr_debug message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: pnx4008: readout watchdog stateAlexandre Belloni1-1/+2
Readout the enabled state so it is possible to get the pre-userspace handler working. Also, avoid disabling the watchdog to ensure it continues working and triggers if there is an issue later in the boot or if userspace fails to start. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: machzwd: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/machzwd.c: In function ‘zf_set_timer’: ./arch/x86/include/asm/io.h:355:14: warning: this statement may fall through [-Wimplicit-fallthrough=] #define outw outw drivers/watchdog/machzwd.c:80:53: note: in expansion of macro ‘outw’ #define zf_writew(port, data) { outb(port, INDEX); outw(data, DATA_W); } ^~~~ drivers/watchdog/machzwd.c:179:3: note: in expansion of macro ‘zf_writew’ zf_writew(COUNTER_1, new); ^~~~~~~~~ drivers/watchdog/machzwd.c:180:2: note: here case WD2: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: pnx4008_wdt: Convert to use device managed functions and other ↵Guenter Roeck1-21/+17
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop empty remove function - Use devm_add_action_or_reset() for calls to clk_disable_unprepare - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: mpc8xxx_wdt: Convert to use device managed functions and other ↵Guenter Roeck1-14/+3
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop empty remove function This also drops the inaccurate message on remove; the driver won't be removed if the hardware watchdog is running, no matter if the watchdog device is open or not. - Use local variable 'struct device *dev' consistently - Use devm_watchdog_register_driver() to register watchdog device Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: jz4740_wdt: Use 'dev' instead of dereferencing it repeatedlyGuenter Roeck1-7/+6
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly. Also, there is no call to dev_get_drvdata() or platform_get_drvdata() in the driver, so drop the unnecessary call to platform_set_drvdata(). The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: rt2880_wdt: Convert to use device managed functions and other ↵Guenter Roeck1-20/+8
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop empty remove function - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device - Replace shutdown function with call to watchdog_stop_on_reboot() Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: mt7621_wdt: Use 'dev' instead of dereferencing it repeatedlyGuenter Roeck1-3/+4
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: loongson1_wdt: Convert to use device managed functions and other ↵Guenter Roeck1-27/+21
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop unnecessary braces around conditional return statements - Drop empty remove function - Use devm_add_action_or_reset() for calls to clk_disable_unprepare - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device Cc: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: pic32-wdt: Convert to use device managed functions and other ↵Guenter Roeck1-34/+24
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop empty remove function - Use devm_add_action_or_reset() for calls to clk_disable_unprepare - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: pic32-dmt: Convert to use device managed functions and other ↵Guenter Roeck1-27/+19
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop empty remove function - Use devm_add_action_or_reset() for calls to clk_disable_unprepare - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: ux500_wdt: Convert to use device managed functions and other ↵Guenter Roeck1-12/+5
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop empty remove function - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: stm32_iwdg: Convert to use device managed functions and other ↵Guenter Roeck1-34/+31
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop empty remove function - Use devm_add_action_or_reset() for calls to clk_disable_unprepare - Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly - Use devm_watchdog_register_driver() to register watchdog device Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: zx2967_wdt: Convert to use device managed functions and other ↵Guenter Roeck1-20/+13
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop empty remove function - Use devm_add_action_or_reset() for calls to clk_disable_unprepare - Use local variable 'struct device *dev' consistently - Use devm_watchdog_register_driver() to register watchdog device Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: sbsa_gwdt: Convert to use device managed functions and other ↵Guenter Roeck1-19/+2
improvements Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop empty remove function - Use local variable 'struct device *dev' consistently - Use devm_watchdog_register_driver() to register watchdog device - Replace shutdown function with call to watchdog_stop_on_reboot() Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: imx_sc_wdt: Use 'dev' instead of dereferencing it repeatedlyGuenter Roeck1-6/+7
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: xen_wdt: Use 'dev' instead of dereferencing it repeatedlyGuenter Roeck1-9/+9
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: wm831x_wdt: Use 'dev' instead of dereferencing it repeatedlyGuenter Roeck1-10/+9
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatedly. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>