| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit ad2302345d59d29232cb668baaae9e840925d153 upstream.
Update state upon any interrupt to report correct state transitions in
case the flexcan core enabled the broken error state quirk fix.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72d92e865d1560723e1957ee3f393688c49ca5bf upstream.
The dlc member of the struct rx_msg contains also the ESD_RTR flag to
mark received RTR frames. Without the fix the can_dlc value for received
RTR frames would always be set to 8 by get_can_dlc() instead of the
received value.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3207c65dfafae27e7c492cb9188c0dc0eeaf3fd upstream.
xhci_stop_device() calls xhci_queue_stop_endpoint() multiple times
without checking the return value. xhci_queue_stop_endpoint() can
return error if the HC is already halted or unable to queue commands.
This can cause a deadlock condition as xhci_stop_device() would
end up waiting indefinitely for a completion for the command that
didn't get queued. Fix this by checking the return value and bailing
out of xhci_stop_device() in case of error. This patch happens to fix
potential memory leaks of the allocated command structures as well.
Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,")
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 810a624bd1b64b13ddcc2eb5c1880526a750a870 upstream.
When a URB is cancled, xhci driver turns the untransferred trbs
into no-ops. If an endpoint stalls on a no-op trb that belongs
to the cancelled URB, the event handler won't reset the endpoint.
Hence, it will stay halted.
Link: http://marc.info/?l=linux-usb&m=149582598330127&w=2
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1aad52cf8b3f95dfe9b5b64da66343306ddf73b upstream.
KASAN reported use-after-free bug when xhci host controller died:
[ 176.952537] BUG: KASAN: use-after-free in xhci_handle_command_timeout+0x68/0x224
[ 176.960846] Write of size 4 at addr ffffffc0cbb01608 by task kworker/3:3/1680
...
[ 177.180644] Freed by task 0:
[ 177.183882] kasan_slab_free+0x90/0x15c
[ 177.188194] kfree+0x114/0x28c
[ 177.191630] xhci_cleanup_command_queue+0xc8/0xf8
[ 177.196916] xhci_hc_died+0x84/0x358
Problem here is that when the cmd_timer fired, it would try to access
current_cmd while the command queue is already freed by xhci_hc_died().
Cleanup current_cmd in xhci_cleanup_command_queue() to avoid that.
Fixes: d9f11ba9f107 ("xhci: Rework how we handle unresponsive or hoptlug removed hosts")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea7d0d69426cab6747ed311c53f4142eb48b9454 upstream.
Many USB 3.1 capable hosts never updated the Serial Bus Release Number
(SBRN) register to USB 3.1 from USB 3.0
xhci driver identified USB 3.1 capable hosts based on this SBRN register,
which according to specs "contains the release of the Universal Serial
Bus Specification with which this Universal Serial Bus Host Controller
module is compliant." but still in october 2017 gives USB 3.0 as
the only possible option.
Make an additional check for USB 3.1 support and enable it if the xHCI
supported protocol capablity lists USB 3.1 capable ports.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 445ef61543da3db5b699f87fb0aa4f227165f6ed upstream.
The sunxi musb has a bug where sometimes it will generate a babble
error on device disconnect instead of a disconnect IRQ. When this
happens the musb controller switches from host mode to device mode
(it clears MUSB_DEVCTL_HM/MUSB_DEVCTL_SESSION and sets
MUSB_DEVCTL_BDEVICE) and gets stuck in this state.
The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM
was cleared.
To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM)
to detect babble error so that sunxi musb babble recovery can handle it
by restoring the mode. This information is provided by the driver logic
and does not rely on register contents.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 297d7fe9e439473800ab1f2f853b4b5f8c888500 upstream.
Currently, the number of channels is set to 15 but in the case of DA8xx,
the number of channels is 4.
Update the driver to configure the number of channels at runtime.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e10c5b0c773efb8643ee89d387d310584ca30830 upstream.
The way to configure the DMA mode on DA8xx is different from DSPS.
Add a new function to configure DMA mode on DA8xx and use a callback
to call the right function based on the platform.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bfa53e0e366b98185fadb03f7916d1538cb90ebd upstream.
The DA8xx and DSPS platforms don't use the same address for few registers.
On Da8xx, this is causing some issues (e.g. teardown that doesn't work).
Configure the address of the register during the init and use them instead
of constants.
Reported-by: nsekhar@ti.com
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c3aae9bd59978fb8c3557d7883380bef0f2cfa1 upstream.
The musb delayed irq work was never flushed on suspend, something which
since 4.9 can lead to an external abort if the work is scheduled after
the grandparent's clock has been disabled:
PM: Suspending system (mem)
PM: suspend of devices complete after 125.224 msecs
PM: suspend devices took 0.132 seconds
PM: late suspend of devices complete after 7.423 msecs
PM: noirq suspend of devices complete after 7.083 msecs
suspend debug: Waiting for 5 second(s).
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0262c60
...
[<c054880c>] (musb_default_readb) from [<c0547b5c>] (musb_irq_work+0x48/0x220)
[<c0547b5c>] (musb_irq_work) from [<c014f8a4>] (process_one_work+0x1f4/0x758)
[<c014f8a4>] (process_one_work) from [<c014fe5c>] (worker_thread+0x54/0x514)
[<c014fe5c>] (worker_thread) from [<c015704c>] (kthread+0x128/0x158)
[<c015704c>] (kthread) from [<c0109330>] (ret_from_fork+0x14/0x24)
Commit 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") started
scheduling musb_irq_work with a delay of up to a second and with
retries thereby making this easy to trigger, for example, by suspending
shortly after a disconnect.
Note that we set a flag to prevent the irq work from rescheduling itself
during suspend and instead process a disconnect immediately. This takes
care of the case where we are disconnected shortly before suspending.
However, when in host mode, a disconnect while suspended will still
go unnoticed and thus prevent the controller from runtime suspending
upon resume as the session bit is always set. This will need to be
addressed separately.
Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect")
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f190e0b9de89c4c917c3ffb3799e9d00fc534ac upstream.
The current session-bit quirk implementation does not prevent the retry
counter from underflowing, something which could break runtime PM and
keep the device active for a very long time (about 2^32 seconds) after a
disconnect.
This notably breaks the B-device timeout case, but could potentially
cause problems also when the controller is operating as an A-device.
Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ed05c68cbcae42cd52b8e53b66952bfa9c002ce upstream.
This fixes a kernel oops when unloading the driver due to usb_put_phy
being called after usb_phy_generic_unregister when the device is
detached. Calling usb_phy_generic_unregister causes x->dev->driver to
be NULL in usb_put_phy and results in a NULL pointer dereference.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be94a6f6d488b4767662e8949dc62361bd1d6311 upstream.
Add missing break in iio_simple_dummy_write_event_config() for the voltage
threshold event enable attribute. Without this writing to the
in_voltage0_thresh_rising_en always returns -EINVAL even though the change
was correctly applied.
Fixes: 3e34e650db197 ("iio: dummy: Demonstrate the usage of new channel types")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 639812a1ed9bf49ae2c026086fbf975339cd1eef upstream.
A user reported a regression with using the normal ioctl interface on
newer kernels. This happens because I was setting the device size
before the device was actually connected, which caused us to error out
and close everything down. This didn't happen on netlink because we
hold the device lock the whole time we're setting things up, but we
don't do that for the ioctl path. This fixes the problem.
Fixes: 29eaadc ("nbd: stop using the bdev everywhere")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9e170e28636fd577249f39029d59e4e960a42b8 upstream.
Fixes following stack trace
kernel: Call Trace:
kernel: dump_stack+0x63/0x84
kernel: __warn+0xd1/0xf0
kernel: warn_slowpath_null+0x1d/0x20
kernel: __queue_work+0x37a/0x420
kernel: queue_work_on+0x27/0x40
kernel: queue_work+0x14/0x20 [qla2xxx]
kernel: schedule_work+0x13/0x20 [qla2xxx]
kernel: qla2x00_post_work+0xab/0xb0 [qla2xxx]
kernel: qla2x00_post_aen_work+0x3b/0x50 [qla2xxx]
kernel: qla2x00_async_event+0x20d/0x15d0 [qla2xxx]
kernel: ? lock_timer_base+0x7d/0xa0
kernel: qla24xx_intr_handler+0x1da/0x310 [qla2xxx]
kernel: qla2x00_poll+0x36/0x60 [qla2xxx]
kernel: qla2x00_mailbox_command+0x659/0xec0 [qla2xxx]
kernel: ? proc_create_data+0x7a/0xd0
kernel: qla25xx_init_rsp_que+0x15b/0x240 [qla2xxx]
kernel: ? request_irq+0x14/0x20 [qla2xxx]
kernel: qla25xx_create_rsp_que+0x256/0x3c0 [qla2xxx]
kernel: qla2xxx_create_qpair+0x2af/0x5b0 [qla2xxx]
kernel: qla2x00_probe_one+0x1107/0x1c30 [qla2xxx]
Fixes: ec7193e26055 ("qla2xxx: Fix delayed response to command for loop mode/direct connect.")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97819f943063b622eca44d3644067c190dc75039 upstream.
If sending messages with no cable connected, it quickly happens that
there is no more TX context available. Then "gs_can_start_xmit()"
returns with "NETDEV_TX_BUSY" and the upper layer does retry
immediately keeping the CPU busy. To fix that issue, I moved
"atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to
the TX done handling in "gs_usb_receive_bulk_callback()". Renaming
"active_tx_urbs" to "active_tx_contexts" and moving it into
"gs_[alloc|free]_tx_context()" would also make sense.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ac7db63333db1eeff901bfd6bbcd502b4634fa4 upstream.
If the connect status change is set during reset signaling, but
the status remains connected just retry port reset.
This solves an issue with connecting a 90W HP Thunderbolt 3 dock
with a Lenovo Carbon x1 (5th generation) which causes a 30min loop
of a high speed device being re-discovererd before usb ports starts
working.
[...]
[ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd
[ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd
[ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd
[...]
This is caused by a high speed device that doesn't successfully go to the
enabled state after the second port reset. Instead the connection bounces
(connected, with connect status change), bailing out completely from
enumeration just to restart from scratch.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2811501e6d8f5747d08f8e25b9ecf472d0dc4c7d upstream.
This keyboard doesn't implement Get String descriptors properly even
though string indexes are valid. What happens is that when requesting
for the String descriptor, the device disconnects and
reconnects. Without this quirk, this loop will continue forever.
Cc: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Владимир Мартьянов <vilgeforce@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 765fb2f181cad669f2beb87842a05d8071f2be85 upstream.
Elatec TWN3 has the union descriptor on data interface. This results in
failure to bind the device to the driver with the following log:
usb 1-1.2: new full speed USB device using streamplug-ehci and address 4
usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: RFID Device (COM)
usb 1-1.2: Manufacturer: OEM
cdc_acm 1-1.2:1.0: Zero length descriptor references
cdc_acm: probe of 1-1.2:1.0 failed with error -22
Adding the NO_UNION_NORMAL quirk for the device fixes the issue.
`lsusb -v` of the device:
Bus 001 Device 003: ID 09d8:0320
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 32
idVendor 0x09d8
idProduct 0x0320
bcdDevice 3.00
iManufacturer 1 OEM
iProduct 2 RFID Device (COM)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 250mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31dc3f819bac28a0990b36510197560258ab7421 upstream.
Add device-id entry for (Honeywell) Metrologic MS7820 bar code scanner.
The device has two interfaces (in this mode?); a vendor-specific
interface with two interrupt endpoints and a second HID interface, which
we do not bind to.
Reported-by: Ladislav Dobrovsky <ladislav.dobrovsky@gmail.com>
Tested-by: Ladislav Dobrovsky <ladislav.dobrovsky@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c0edc3633b56000e18d82fc241e3995ca18a69e upstream.
Andrey used the syzkaller fuzzer to find an out-of-bounds memory
access in usb_get_bos_descriptor(). The code wasn't checking that the
next usb_dev_cap_header structure could fit into the remaining buffer
space.
This patch fixes the error and also reduces the bNumDeviceCaps field
in the header to match the actual number of capabilities found, in
cases where there are fewer than expected.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 845d584f41eac3475c21e4a7d5e88d0f6e410cf7 upstream.
Taking the uurb->buffer_length userspace passes in as a maximum for the
actual urbs transfer_buffer_length causes 2 serious issues:
1) It breaks isochronous support for all userspace apps using libusb,
as existing libusb versions pass in 0 for uurb->buffer_length,
relying on the kernel using the lenghts of the usbdevfs_iso_packet_desc
descriptors passed in added together as buffer length.
This for example causes redirection of USB audio and Webcam's into
virtual machines using qemu-kvm to no longer work. This is a userspace
ABI break and as such must be reverted.
Note that the original commit does not protect other users / the
kernels memory, it only stops the userspace process making the call
from shooting itself in the foot.
2) It may cause the kernel to program host controllers to DMA over random
memory. Just as the devio code used to only look at the iso_packet_desc
lenghts, the host drivers do the same, relying on the submitter of the
urbs to make sure the entire buffer is large enough and not checking
transfer_buffer_length.
But the "USB: devio: Don't corrupt user memory" commit now takes the
userspace provided uurb->buffer_length for the buffer-size while copying
over the user-provided iso_packet_desc lengths 1:1, allowing the user
to specify a small buffer size while programming the host controller to
dma a lot more data.
(Atleast the ohci, uhci, xhci and fhci drivers do not check
transfer_buffer_length for isoc transfers.)
This reverts commit fa1ed74eb1c2 ("USB: devio: Don't corrupt user memory")
fixing both these issues.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c97d96b4e612c7dc1b37d7afc61b598a9a25994d upstream.
The previous commit (0adbfd46) fixed a memory leak but also freed a
block in the success case, causing a stale pointer to be used with
potentially fatal results. Only free the vchi_instance block in the
case that vchi_connect fails; once connected, the instance is
retained for subsequent connections.
Simplifying the code by removing a bunch of gotos and returning errors
directly.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Fixes: 0adbfd4694c2 ("staging: bcm2835-audio: fix memory leak in bcm2835_audio_open_connection()")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03bad714a1619c0074eb44d6f217c505fe27030f upstream.
Don't signal host if it has disabled interrupts for that
ring buffer. Check the feature bit to see if host supports
pending send size flag.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 05d00bc94ac27d220d8a78e365d7fa3a26dcca17 upstream.
Don't need cached read index anymore now that packet iterator
is used. The iterator has the original read index until the
visible read_index is updated.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dd45f2ab005a1f3301296059b23b03ec3dbf79b upstream.
The function hv_signal_on_read was defined in hyperv.h and
only used in one place in ring_buffer code. Clearer to just
move it inline there.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4226ff69a3dff78bead7d9a270423cd21f8d40b8 upstream.
With new iterator functions (and the double mapping) the ring buffer
read function can be greatly simplified.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 192b2d78722ffea188e5ec6ae5d55010dce05a4b upstream.
This patch addresses the following bugs in the current rescind handling code:
1. Fixes a race condition where we may be invoking hv_process_channel_removal()
on an already freed channel.
2. Prevents indefinite wait when rescinding sub-channels by correctly setting
the probe_complete state.
I would like to thank Dexuan for patiently reviewing earlier versions of this
patch and identifying many of the issues fixed here.
Greg, please apply this to 4.14-final.
Fixes: '54a66265d675 ("Drivers: hv: vmbus: Fix rescind handling")'
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f3d791f300618caf82a2be0c27456edd76d5164 upstream.
This patch handles the following issues that were observed when we are
handling racing channel offer message and rescind message for the same
offer:
1. Since the host does not respond to messages on a rescinded channel,
in the current code, we could be indefinitely blocked on the vmbus_open() call.
2. When a rescinded channel is being closed, if there is a pending interrupt on the
channel, we could end up freeing the channel that the interrupt handler would run on.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0933a456ff83a3b5ffa3a1903e0b8de4a56adf5 upstream.
In addition to DEFT, Elecom introduced a larger trackball called HUGE, in
both wired (M-HT1URBK) and wireless (M-HT1DRBK) versions. It has the same
buttons and behavior as the DEFT. This patch adds the two relevant USB IDs
to enable operation of the three Fn buttons on the top of the device.
Cc: Diego Elio Petteno <flameeyes@flameeyes.eu>
Signed-off-by: Alex Manoussakis <amanou@gnu.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69a330007091ea8a801dd9fcd897ec52f9529586 upstream.
parse_cec_param() compares a string with "cec_disable" using only 7
characters of the 11-character-long string.
The proper solution for this would be:
#define CEC_DISABLE "cec_disable"
strncmp(str, CEC_DISABLE, strlen(CEC_DISABLE))
but when comparing a string against a string constant strncmp() has no
advantage over strcmp() because the comparison is guaranteed to be bound by
the string constant. So just replace str strncmp() with strcmp().
[ tglx: Made it use strcmp and updated the changelog ]
Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170903075440.30250-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 299d7572e46f98534033a9e65973f13ad1ce9047 upstream.
Make sure to reset the USB-console port pointer when console setup fails
in order to avoid having the struct usb_serial be prematurely freed by
the console code when the device is later disconnected.
Fixes: 73e487fdb75f ("[PATCH] USB console: fix disconnection issues")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd998c2e0df0469707503023d50d46cf0b10c787 upstream.
A clean-up patch removing two redundant NULL-checks from the console
disconnect handler inadvertently also removed a third check. This could
lead to the struct usb_serial being prematurely freed by the console
code when a driver accepts but does not register any ports for an
interface which also lacks endpoint descriptors.
Fixes: 0e517c93dc02 ("USB: serial: console: clean up sanity checks")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5d9644c5fca7d8e8972268598bb516a7eae17f9 upstream.
Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74
series which will by default boot with vid 0x413c and pid's 0x81cf,
0x81d0, 0x81d1, 0x81d2.
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 837ddc4793a69b256ac5e781a5e729b448a8d983 upstream.
This commit adds support for TP-Link LTE mPCIe module is used
in in TP-Link MR200v1, MR6400v1 and v2 routers.
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c496ad835c31ad639b6865714270b3003df031f6 upstream.
Add the USB device id for the ELV TFD500 data logger.
Signed-off-by: Andreas Engel <anen-nospam@gmx.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7eac35ea29dc54cbc8399de84c9bf16553575b89 upstream.
When adding GPIO support for the cp2105, the mentioned commit by Martyn
Welch introduced a query for the part number of the chip. Unfortunately
the driver aborts probing when this query fails, so currently the driver
can not be used with chips not supporting this query.
I have a data cable for Siemens mobile phones (ID 10ab:10c5) where this
is the case.
With this patch the driver can be bound even if the part number can not
be queried.
Fixes: cf5276ce7867 ("USB: serial: cp210x: Adding GPIO support for CP2105")
Signed-off-by: Sebastian Frei <dr.nop@gmx.net>
[ johan: amend commit message; shorten error message and demote to
warning; drop unnecessary move of usb_set_serial_data() ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6c215e21b0dc5fe9416dce90f9acc2ea53c4502 upstream.
Add CYPRESS_VID vid and CYPRESS_WICED_BT_USB and CYPRESS_WICED_WL_USB
device IDs to ftdi_sio driver.
Signed-off-by: Jeffrey Chu <jeffrey.chu@cypress.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c2b4e3c3725801b57d7b858d216d38f83bdb35d upstream.
This reverts commit d7bd554f27c942e6b8b54100b4044f9be1038edf.
It turns out that Tegra20 has a bug in the implementation of the MSI
target address register (which is worked around by the existence of the
struct tegra_pcie_soc.msi_base_shift parameter) that restricts the MSI
target memory to the lower 32 bits of physical memory on that particular
generation. The offending patch causes a regression on TrimSlice, which
is a Tegra20-based device and has a PCI network interface card.
An initial, simpler fix was to change the MSI target address for Tegra20
only, but it was pointed out that the offending commit also prevents the
use of 32-bit only MSI capable devices, even on later chips. Technically
this was never guaranteed to work with the prior code in the first place
because the allocated page could have resided beyond the 4 GiB boundary,
but it is still possible that this could've introduced a regression.
The proper fix that was settled on is to select a fixed address within
the lowest 32 bits of physical address space that is otherwise unused,
but testing of that patch has provided mixed results that are not fully
understood yet.
Given all of the above and the relative urgency to get this fixed in
v4.13, revert the offending commit until a universal fix is found.
Fixes: d7bd554f27c9 ("PCI: tegra: Do not allocate MSI target memory")
Reported-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Reported-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 407dae1e4415acde2d9f48bb76361893c4653756 upstream.
struct pci_host_bridge gained hooks to map/swizzle IRQs, so that the IRQ
mapping can be done automatically by PCI core code through the
pci_assign_irq() function instead of resorting to arch-specific
implementation callbacks to carry out the same task which force PCI host
bridge drivers implementation to implement per-arch kludges to carry out a
task that is inherently architecture agnostic.
Commit 769b461fc0c0 ("arm64: PCI: Drop DT IRQ allocation from
pcibios_alloc_irq()") was assuming all PCI host controller drivers had been
converted to use ->map_irq(), but that wasn't the case: pci-aardvark had
not been converted. Due to this, it broke the support for legacy PCI
interrupts when using the pci-aardvark driver (used on Marvell Armada 3720
platforms).
In order to fix this, we make sure the ->map_irq and ->swizzle_irq fields
of pci_host_bridge are properly filled in.
Fixes: 769b461fc0c0 ("arm64: PCI: Drop DT IRQ allocation from pcibios_alloc_irq()")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aec17e1e249567e82b26dafbb86de7d07fde8729 upstream.
KASAN enabled configuration reports an error
BUG: KASAN: use-after-free in usb_composite_overwrite_options+...
[libcomposite] at addr ...
Read of size 1 by task ...
when some driver is un-bound and then bound again.
For example, this happens with FunctionFS driver when "ffs-test"
test application is run several times in a row.
If the driver has empty manufacturer ID string in initial static data,
it is then replaced with generated string. After driver unbinding
the generated string is freed, but the driver data still keep that
pointer. And if the driver is then bound again, that pointer
is re-used for string emptiness check.
The fix is to clean up the driver string data upon its unbinding
to drop the pointer to freed memory.
Fixes: cc2683c318a5 ("usb: gadget: Provide a default implementation of default manufacturer string")
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff74745e6d3d97a865eda8c1f3fd29c13b79f0cc upstream.
Kmemleak checking configuration reports a memory leak in
usb_os_desc_prepare_interf_dir function when rndis function
instance is freed and then allocated again. For example, this
happens with FunctionFS driver with RNDIS function enabled
when "ffs-test" test application is run several times in a row.
The data for intermediate "os_desc" group for interface directories
is allocated as a single VLA chunk and (after a change of default
groups handling) is not ever freed and actually not stored anywhere
besides inside a list of default groups of a parent group.
The fix is to make usb_os_desc_prepare_interf_dir function return
a pointer to allocated data (as a pointer to the first VLA item)
instead of (an unused) integer and to make the caller component
(currently the only one is RNDIS function) responsible for storing
the pointer and freeing the memory when appropriate.
Fixes: 1ae1602de028 ("configfs: switch ->default groups to a linked list")
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6a55c63e6adcb58957bbdce2d390088970273da upstream.
crtc_state_is_legacy_gamma also checks for CTM, which was missing from
intel_color_check. By using the same condition for commit and check
we reduce the chance of mismatches.
This was spotted by KASAN while trying to rework kms_color igt test.
[ 72.008660] ==================================================================
[ 72.009326] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[ 72.009519] Read of size 2 at addr ffff880220216e50 by task kms_color/1158
[ 72.009900] CPU: 2 PID: 1158 Comm: kms_color Tainted: G U W 4.14.0-rc3-patser+ #5281
[ 72.009921] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016
[ 72.009941] Call Trace:
[ 72.009968] dump_stack+0xc5/0x151
[ 72.009996] ? _atomic_dec_and_lock+0x10f/0x10f
[ 72.010024] ? show_regs_print_info+0x3c/0x3c
[ 72.010072] print_address_description+0x7f/0x240
[ 72.010108] kasan_report+0x216/0x370
[ 72.010308] ? bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[ 72.010349] __asan_load2+0x74/0x80
[ 72.010552] bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[ 72.010772] broadwell_load_luts+0x1f0/0x300 [i915]
[ 72.010997] intel_color_load_luts+0x36/0x40 [i915]
[ 72.011205] intel_begin_crtc_commit+0xa1/0x310 [i915]
[ 72.011283] drm_atomic_helper_commit_planes_on_crtc+0xa6/0x320 [drm_kms_helper]
[ 72.011316] ? wait_for_completion_io+0x460/0x460
[ 72.011524] intel_update_crtc+0xe3/0x100 [i915]
[ 72.011720] skl_update_crtcs+0x360/0x3f0 [i915]
[ 72.011945] ? intel_update_crtcs+0xf0/0xf0 [i915]
[ 72.012010] ? drm_atomic_helper_wait_for_dependencies+0x3d9/0x400 [drm_kms_helper]
[ 72.012231] intel_atomic_commit_tail+0x8db/0x1500 [i915]
[ 72.012273] ? __lock_is_held+0x9c/0xc0
[ 72.012494] ? skl_update_crtcs+0x3f0/0x3f0 [i915]
[ 72.012518] ? find_next_bit+0xb/0x10
[ 72.012544] ? cpumask_next+0x1a/0x20
[ 72.012745] ? i915_sw_fence_complete+0x9d/0xe0 [i915]
[ 72.012938] ? __i915_sw_fence_complete+0x5d0/0x5d0 [i915]
[ 72.013176] intel_atomic_commit+0x528/0x570 [i915]
[ 72.013280] ? drm_atomic_get_property+0xc00/0xc00 [drm]
[ 72.013466] ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[ 72.013496] ? kmem_cache_alloc_trace+0x266/0x280
[ 72.013714] ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[ 72.013812] drm_atomic_commit+0x77/0x80 [drm]
[ 72.013911] set_property_atomic+0x14a/0x210 [drm]
[ 72.014015] ? drm_object_property_get_value+0x70/0x70 [drm]
[ 72.014080] ? mutex_unlock+0xd/0x10
[ 72.014292] ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[ 72.014379] drm_mode_obj_set_property_ioctl+0x1cf/0x310 [drm]
[ 72.014481] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[ 72.014510] ? lock_release+0x6c0/0x6c0
[ 72.014602] ? drm_is_current_master+0x46/0x60 [drm]
[ 72.014706] drm_ioctl_kernel+0x148/0x1d0 [drm]
[ 72.014799] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[ 72.014898] ? drm_ioctl_permit+0x100/0x100 [drm]
[ 72.014936] ? kasan_check_write+0x14/0x20
[ 72.015039] drm_ioctl+0x441/0x660 [drm]
[ 72.015129] ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[ 72.015235] ? drm_getstats+0x20/0x20 [drm]
[ 72.015287] ? ___might_sleep+0x159/0x340
[ 72.015311] ? find_held_lock+0xcf/0xf0
[ 72.015341] ? __schedule_bug+0x110/0x110
[ 72.015405] do_vfs_ioctl+0xa88/0xb10
[ 72.015449] ? ioctl_preallocate+0x1a0/0x1a0
[ 72.015487] ? selinux_capable+0x20/0x20
[ 72.015525] ? rcu_dynticks_momentary_idle+0x40/0x40
[ 72.015607] SyS_ioctl+0x4e/0x80
[ 72.015647] entry_SYSCALL_64_fastpath+0x18/0xad
[ 72.015670] RIP: 0033:0x7ff74a3d04d7
[ 72.015691] RSP: 002b:00007ffc594bec08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 72.015734] RAX: ffffffffffffffda RBX: ffffffff8718f54a RCX: 00007ff74a3d04d7
[ 72.015756] RDX: 00007ffc594bec40 RSI: 00000000c01864ba RDI: 0000000000000003
[ 72.015777] RBP: ffff880211c0ff98 R08: 0000000000000086 R09: 0000000000000000
[ 72.015799] R10: 00007ff74a691b58 R11: 0000000000000246 R12: 0000000000000355
[ 72.015821] R13: 00000000ff00eb00 R14: 0000000000000a00 R15: 00007ff746082000
[ 72.015857] ? trace_hardirqs_off_caller+0xfa/0x110
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005141520.23990-1-maarten.lankhorst@linux.intel.com
[mlankhorst: s/crtc_state_is_legacy/&_gamma/ (danvet)]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 82cf435b3134 ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
(cherry picked from commit 0c3767b28186c8129f2a2cfec06a93dcd6102391)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea850f64c2722278f150dc11de2141baeb24211c upstream.
While technically CHV isn't DDI, we do look at the VBT based DDI port
info for HDMI DDC pin and DP AUX channel. (We call these "alternate",
but they're really just something that aren't platform defaults.)
In commit e4ab73a13291 ("drm/i915: Respect alternate_ddc_pin for all DDI
ports") Ville writes, "IIRC there may be CHV system that might actually
need this."
I'm not sure why there couldn't be even more platforms that need this,
but start conservative, and parse the info for CHV in addition to DDI.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553
Reported-by: Marek Wilczewski <mw@3cte.pl>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com
(cherry picked from commit 348e4058ebf53904e817eec7a1b25327143c2ed2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b50f7b24cd6c98541f1af53bddc5b6e861ee8c8 upstream.
intel_crtc->config->cpu_transcoder isn't yet filled out when
intel_crtc_mode_get() gets called during output probing, so we should
not use it there. Instead intel_crtc_mode_get() figures out the correct
transcoder on its own, and that's what we should use.
If the BIOS boots LVDS on pipe B, intel_crtc_mode_get() would actually
end up reading the timings from pipe A instead (since PIPE_A==0),
which clearly isn't what we want.
It looks to me like this may have been broken by
commit eccb140bca67 ("drm/i915: hw state readout&check support for cpu_transcoder")
as that one removed the early initialization of cpu_transcoder from
intel_crtc_init().
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Kramer <rob@solution-space.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Rob Kramer <rob@solution-space.com>
Fixes: eccb140bca67 ("drm/i915: hw state readout&check support for cpu_transcoder")
References: https://lists.freedesktop.org/archives/dri-devel/2016-April/104142.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1459525046-19425-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit e30a154b5262b967b133b06ac40777e651045898)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d7ba25bd9ef802ff02414e9105f4222d1795f27a upstream.
Kernel stores the time in jiffies at which the eDP panel is turned
off. This should be obtained after the panel is off (after the
wait_panel_off). When we next attempt to turn the panel on, we use the
difference between the timestamp at which we want to turn the panel on
and timestamp at which panel was turned off to ensure that this is equal
to panel power cycle delay and if not we wait for the remaining
time. Not waiting for the panel power cycle delay can cause the panel to
not turn on giving rise to AUX timeouts for the attempted AUX
transactions.
v2:
* Separate lines for bugzilla (Jani Nikula)
* Suggested by tag (Daniel Vetter)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com
(cherry picked from commit cbacf02e7796fea02e5c6e46c90ed7cbe9e6f2c0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78279127253a6c36ed8829eb2b7bc28ef48d9717 upstream.
Kmemleak reported memory leak after suspend and resume:
unreferenced object 0xffffffc0e31d8880 (size 128):
comm "bash", pid 181, jiffies 4294763583 (age 24.694s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 20 a2 eb c0 ff ff ff ......... ......
01 00 00 00 00 00 00 00 80 87 1d e3 c0 ff ff ff ................
backtrace:
[<ffffffc00034bb64>] __save_stack_trace+0x48/0x6c
[<ffffffc00034c244>] create_object+0x138/0x254
[<ffffffc0009dd218>] kmemleak_alloc+0x58/0x8c
[<ffffffc000346de4>] kmem_cache_alloc_trace+0x188/0x254
[<ffffffc0005af4c0>] drm_atomic_state_alloc+0x3c/0x88
[<ffffffc000591f0c>] drm_atomic_helper_duplicate_state+0x28/0x158
[<ffffffc000592098>] drm_atomic_helper_suspend+0x5c/0xf0
Problem here is that we are duplicating the drm_atomic_state in
drm_atomic_helper_suspend(), but not unreference it in the resume path.
Fixes: 1494276000db ("drm/atomic-helper: Implement subsystem-level suspend/resume")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009064641.15174-1-jeffy.chen@rock-chips.com
Fixes: 0853695c3ba4 ("drm: Add reference counting to drm_atomic_state")
(cherry picked from commit 6d281b1f79e194c02125da29ea77316810261ca8)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5ab894aee0f171a682bcd90dd5d1930cb53c55dc upstream.
Deletion of subdevice will remove device properties associated to parent
when they share the same firmware node after commit 478573c93abd (driver
core: Don't leak secondary fwnode on device removal). This was observed
with a driver adding subdevice that driver wasn't able to read device
properties after rmmod/modprobe cycle.
Consider the lifecycle of it:
parent device registration
ACPI_COMPANION_SET()
device_add_properties()
pset_copy_set()
set_secondary_fwnode(dev, &p->fwnode)
device_add()
parent probe
read device properties
ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent))
device_add(subdevice)
parent remove
device_del(subdevice)
device_remove_properties()
set_secondary_fwnode(dev, NULL);
pset_free()
Parent device will have its primary firmware node pointing to an ACPI
node and secondary firmware node point to device properties.
ACPI_COMPANION_SET() call in parent probe will set the subdevice's
firmware node to point to the same 'struct fwnode_handle' and the
associated secondary firmware node, i.e. the device properties as the
parent.
When subdevice is deleted in parent remove that will remove those
device properties and attempt to read device properties in next
parent probe call will fail.
Fix this by tracking the owner device of device properties and delete
them only when owner device is being deleted.
Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal)
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce76353f169a6471542d999baf3d29b121dce9c0 upstream.
The function only sends the flush command to the IOMMU(s),
but does not wait for its completion when it returns. Fix
that.
Fixes: 601367d76bd1 ('x86/amd-iommu: Remove iommu_flush_domain function')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
