summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-08-02Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpcLinus Torvalds7-2/+345
Pull OLPC platform updates from Andres Salomon: "These move the OLPC Embedded Controller driver out of arch/x86/platform and into drivers/platform/olpc. OLPC machines are now ARM-based (which means lots of x86 and ARM changes), but are typically pretty self-contained.. so it makes more sense to go through a separate OLPC tree after getting the appropriate review/ACKs." * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc: x86: OLPC: move s/r-related EC cmds to EC driver Platform: OLPC: move global variables into priv struct Platform: OLPC: move debugfs support from x86 EC driver x86: OLPC: switch over to using new EC driver on x86 Platform: OLPC: add a suspended flag to the EC driver Platform: OLPC: turn EC driver into a platform_driver Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it drivers: OLPC: update various drivers to include olpc-ec.h Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-13/+37
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-08-02Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds9-26/+124
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits) sh: explicitly include sh_dma.h in setup-sh7722.c sh: ecovec: care CN5 VBUS if USB host mode sh: sh7724: fixup renesas_usbhs clock settings sh: intc: initial irqdomain support. sh: pfc: Fix up init ordering mess. serial: sh-sci: fix compilation breakage, when DMA is enabled dmaengine: shdma: restore partial transfer calculation sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757 sh: Fix up recursive fault in oops with unset TTB. sh: pfc: Build fix for pinctrl_remove_gpio_range() changes. sh: select the fixed regulator driver on several boards sh: ecovec: switch MMC power control to regulators sh: add fixed voltage regulators to se7724 sh: add fixed voltage regulators to sdk7786 sh: add fixed voltage regulators to rsk sh: add fixed voltage regulators to migor sh: add fixed voltage regulators to kfr2r09 sh: add fixed voltage regulators to ap325rxa sh: add fixed voltage regulators to sh7757lcr sh: add fixed voltage regulators to sh2007 ...
2012-08-02Merge tag 'md-3.6' of git://neil.brown.name/mdLinus Torvalds5-22/+150
Pull additional md update from NeilBrown: "This contains a few patches that depend on plugging changes in the block layer so needed to wait for those. It also contains a Kconfig fix for the new RAID10 support in dm-raid." * tag 'md-3.6' of git://neil.brown.name/md: md/dm-raid: DM_RAID should select MD_RAID10 md/raid1: submit IO from originating thread instead of md thread. raid5: raid5d handle stripe in batch way raid5: make_request use batch stripe release
2012-08-02Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds11-1123/+2070
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
2012-08-02md/dm-raid: DM_RAID should select MD_RAID10NeilBrown1-2/+3
Now that DM_RAID supports raid10, it needs to select that code to ensure it is included. Cc: Jonathan Brassow <jbrassow@redhat.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02md/raid1: submit IO from originating thread instead of md thread.NeilBrown2-4/+55
queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02raid5: raid5d handle stripe in batch wayShaohua Li1-13/+32
Let raid5d handle stripe in batch way to reduce conf->device_lock locking. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02raid5: make_request use batch stripe releaseShaohua Li2-3/+60
make_request() does stripe release for every stripe and the stripe usually has count 1, which makes previous release_stripe() optimization not work. In my test, this release_stripe() becomes the heaviest pleace to take conf->device_lock after previous patches applied. Below patch makes stripe release batch. All the stripes will be released in unplug. The STRIPE_ON_UNPLUG_LIST bit is to protect concurrent access stripe lru. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-01Merge tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6Linus Torvalds48-1089/+2468
Pull fbdev updates from Florian Tobias Schandinat: - large updates for OMAP - support for LCD3 overlay manager (omap5) - omapdss output cleanup - removal of passive matrix LCD support as there are no drivers for such panels for DSS or DSS2 and nobody complained (cleanup) - large updates for SH Mobile - overlay support - separating MERAM (cache) from framebuffer driver - some updates for Exynos and da8xx-fb - various other small patches * tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits) da8xx-fb: fix compile issue due to missing include fbdev: Make pixel_to_pat() failure mode more friendly da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled fbdev: sh_mobile_lcdc: Fix vertical panning step video: exynos mipi dsi: Fix mipi dsi regulators handling issue video: da8xx-fb: do clock reset of revision 2 LCDC before enabling arm: da850: configure LCDC fifo threshold video: da8xx-fb: configure FIFO threshold to reduce underflow errors video: da8xx-fb: fix flicker due to 1 frame delay in updated frame video: da8xx-fb rev2: fix disabling of palette completion interrupt da8xx-fb: add missing FB_BLANK operations video: exynos_dp: use usleep_range instead of delay video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training fb: epson1355fb: Fix section mismatch video: exynos_dp: fix wrong DPCD address during Link Training video/smscufx: fix line counting in fb_write aty128fb: Fix coding style issues fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation fbdev: sh_mobile_lcdc: Support horizontal panning ...
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds9-88/+35
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-08-01Merge branch 'for-3.6/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds17-165/+198
Pull block driver changes from Jens Axboe: - Making the plugging support for drivers a bit more sane from Neil. This supersedes the plugging change from Shaohua as well. - The usual round of drbd updates. - Using a tail add instead of a head add in the request completion for ndb, making us find the most completed request more quickly. - A few floppy changes, getting rid of a duplicated flag and also running the floppy init async (since it takes forever in boot terms) from Andi. * 'for-3.6/drivers' of git://git.kernel.dk/linux-block: floppy: remove duplicated flag FD_RAW_NEED_DISK blk: pass from_schedule to non-request unplug functions. block: stack unplug blk: centralize non-request unplug handling. md: remove plug_cnt feature of plugging. block/nbd: micro-optimization in nbd request completion drbd: announce FLUSH/FUA capability to upper layers drbd: fix max_bio_size to be unsigned drbd: flush drbd work queue before invalidate/invalidate remote drbd: fix potential access after free drbd: call local-io-error handler early drbd: do not reset rs_pending_cnt too early drbd: reset congestion information before reporting it in /proc/drbd drbd: report congestion if we are waiting for some userland callback drbd: differentiate between normal and forced detach drbd: cleanup, remove two unused global flags floppy: Run floppy initialization asynchronous
2012-08-01Merge branch 'for-3.6/core' of git://git.kernel.dk/linux-blockLinus Torvalds2-39/+1
Pull core block IO bits from Jens Axboe: "The most complicated part if this is the request allocation rework by Tejun, which has been queued up for a long time and has been in for-next ditto as well. There are a few commits from yesterday and today, mostly trivial and obvious fixes. So I'm pretty confident that it is sound. It's also smaller than usual." * 'for-3.6/core' of git://git.kernel.dk/linux-block: block: remove dead func declaration block: add partition resize function to blkpg ioctl block: uninitialized ioc->nr_tasks triggers WARN_ON block: do not artificially constrain max_sectors for stacking drivers blkcg: implement per-blkg request allocation block: prepare for multiple request_lists block: add q->nr_rqs[] and move q->rq.elvpriv to q->nr_rqs_elvpriv blkcg: inline bio_blkcg() and friends block: allocate io_context upfront block: refactor get_request[_wait]() block: drop custom queue draining used by scsi_transport_{iscsi|fc} mempool: add @gfp_mask to mempool_create_node() blkcg: make root blkcg allocation use %GFP_KERNEL blkcg: __blkg_lookup_create() doesn't need radix preload
2012-08-01Merge branch 'for-next' of git://neil.brown.name/mdLinus Torvalds8-219/+400
Pull md updates from NeilBrown. * 'for-next' of git://neil.brown.name/md: DM RAID: Add support for MD RAID10 md/RAID1: Add missing case for attempting to repair known bad blocks. md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE. md/raid1: don't abort a resync on the first badblock. md: remove duplicated test on ->openers when calling do_md_stop() raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layer md/raid1: prevent merging too large request md/raid1: read balance chooses idlest disk for SSD md/raid1: make sequential read detection per disk based MD RAID10: Export md_raid10_congested MD: Move macros from raid1*.h to raid1*.c MD RAID1: rename mirror_info structure MD RAID10: rename mirror_info structure MD RAID10: Fix compiler warning. raid5: add a per-stripe lock raid5: remove unnecessary bitmap write optimization raid5: lockless access raid5 overrided bi_phys_segments raid5: reduce chance release_stripe() taking device_lock
2012-08-01delousing target_core_file a bitAl Viro1-27/+5
* set_fs(KERNEL_DS) + getname() is probably the weirdest implementation of strdup() I've seen. Especially since they don't to copy it at all... * filp_open() never returns NULL; it's ERR_PTR(-E...) on failure. * file->f_dentry is never going to be NULL, TYVM. * match_strdup() + snprintf() + kfree() is a bloody weird way to spell match_strlcpy(). Pox on cargo-cult programmers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-01DM RAID: Add support for MD RAID10Jonathan Brassow1-5/+90
Support the MD RAID10 personality through dm-raid.c Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-01Merge commit 'c039c332f23e794deb6d6f37b9f07ff3b27fb2cf' into mdNeilBrown1608-55721/+77054
Pull in pre-requisites for adding raid10 support to dm-raid.
2012-08-01Merge branch 'common/irqdomain' into sh-latestPaul Mundt5-5/+85
2012-08-01sh: intc: initial irqdomain support.Paul Mundt5-5/+85
Trivial support for irq domains, using either a linear map or radix tree depending on the vector layout. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01Merge branch 'common/pinctrl' into sh-latestPaul Mundt1-17/+15
2012-08-01sh: pfc: Fix up init ordering mess.Paul Mundt1-17/+15
Commit ca5481c68e9fbcea62bb3c78ae6cccf99ca8fb73 ("sh: pfc: Rudimentary pinctrl-backed GPIO support.") introduced a regression for platforms that were doing early GPIO API calls (from arch_initcall() or earlier), leading to a situation where our two-stage registration logic would trip itself up and we'd -ENODEV out of the pinctrl registration path, resulting in endless -EPROBE_DEFER errors. Further lack of checking any sort of errors from gpio_request() resulted in boot time warnings, tripping on the FLAG_REQUESTED test-and-set in gpio_ensure_requested(). As it turns out there's no particular need to bother with the two-stage registration, as the platform bus is already available at the point that we have to start caring. As such, it's easiest to simply fold these together in to a single init path, the ordering of which is ensured through the platform's mux registration, as usual. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01Merge branch 'sh/dmaengine' into sh-latestPaul Mundt1934-62202/+198204
2012-08-01serial: sh-sci: fix compilation breakage, when DMA is enabledGuennadi Liakhovetski1-2/+3
A recent commit: commit d6fa5a4e7ab605370fd6c982782f84ef2e6660e7 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> serial: sh-sci: prepare for conversion to the shdma base library is not sufficient to update the sh-sci driver to the new shdma driver layout. This caused compilation breakage, when CONFIG_SERIAL_SH_SCI_DMA is enabled. This patch trivially fixes the problem by updating the DMA descriptor manipulation code. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01dmaengine: shdma: restore partial transfer calculationGuennadi Liakhovetski2-0/+21
The recent shdma driver split has mistakenly removed support for partial DMA transfer size calculation on forced termination. This patch restores it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01Platform: OLPC: move global variables into priv structAndres Salomon1-20/+28
Populate olpc_ec_priv with variables that were previously global. This makes things a tad bit clearer, IMO. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01Platform: OLPC: move debugfs support from x86 EC driverAndres Salomon1-0/+117
There's nothing about the debugfs interface for the EC driver that is architecture-specific, so move it into the arch-independent driver. The code is mostly unchanged with the exception of renamed variables, coding style changes, and API updates. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01x86: OLPC: switch over to using new EC driver on x86Andres Salomon1-5/+0
This uses the new EC driver framework in drivers/platform/olpc. The XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff (including a new workqueue; no more running EC commands with IRQs disabled!) can be shared with other architectures. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01Platform: OLPC: add a suspended flag to the EC driverAndres Salomon1-1/+45
A problem we've noticed on XO-1.75 is when we suspend in the middle of an EC command. Don't allow that. In the process, create a private object for the generic EC driver to use; we have a framework for passing around a struct, use that rather than a proliferation of global variables. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01Platform: OLPC: turn EC driver into a platform_driverAndres Salomon1-0/+48
The 1.75-based OLPC EC driver already does this; let's do it for all EC drivers. This gives us nice suspend/resume hooks, amongst other things. We want to run the EC's suspend hooks later than other drivers (which may be setting wakeup masks or be running EC commands). We also want to run the EC's resume hooks earlier than other drivers (which may want to run EC commands). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call itAndres Salomon1-2/+110
This provides a new API allows different OLPC architectures to override the EC driver. x86 and ARM OLPC machines use completely different EC backends. The olpc_ec_cmd is synchronous, and waits for the workqueue to send the command to the EC. Multiple callers can run olpc_ec_cmd() at once, and they will by serialized and sleep while only one executes on the EC at a time. We don't provide an unregister function, as that doesn't make sense within the context of OLPC machines - there's only ever 1 EC, it's critical to functionality, and it certainly not hotpluggable. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01drivers: OLPC: update various drivers to include olpc-ec.hAndres Salomon4-2/+4
Switch over to using olpc-ec.h in multiple steps, so as not to break builds. This covers every driver that calls olpc_ec_cmd(). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driverAndres Salomon3-0/+21
The OLPC EC driver has outgrown arch/x86/platform/. It's time to both share common code amongst different architectures, as well as move it out of arch/x86/. The XO-1.75 is ARM-based, and the EC driver shares a lot of code with the x86 code. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-01Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds10-12/+14
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
2012-08-01Merge tag 'vfio-for-v3.6' of git://github.com/awilliam/linux-vfioLinus Torvalds13-0/+5426
Pull VFIO core from Alex Williamson: "This series includes the VFIO userspace driver interface for the 3.6 kernel merge window. This driver is intended to provide a secure interface for device access using IOMMU protection for applications like assignment of physical devices to virtual machines. Qemu will be the first user of this interface, enabling assignment of PCI devices to Qemu guests. This interface is intended to eventually replace the x86-specific assignment mechanism currently available in KVM. This interface has the advantage of being more secure, by working with IOMMU groups to ensure device isolation and providing it's own filtered resource access mechanism, and also more flexible, in not being x86 or KVM specific (extensions to enable POWER are already working). This driver is originally the work of Tom Lyon, but has since been handed over to me and gone through a complete overhaul thanks to the input from David Gibson, Ben Herrenschmidt, Chris Wright, Joerg Roedel, and others. This driver has been available in linux-next for the last month." Paul Mackerras says: "I would be glad to see it go in since we want to use it with KVM on PowerPC. If possible we'd like the PowerPC bits for it to go in as well." * tag 'vfio-for-v3.6' of git://github.com/awilliam/linux-vfio: vfio: Add PCI device driver vfio: Type1 IOMMU implementation vfio: Add documentation vfio: VFIO core
2012-08-01Merge tag 'random_for_linus' of ↵Linus Torvalds17-159/+287
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
2012-08-01Merge tag 'rdma-for-linus' of ↵Linus Torvalds8-258/+555
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull final RDMA changes from Roland Dreier: - Fix IPoIB to stop using unsafe linkage between networking neighbour layer and private path database. - Small fixes for bugs found by Fengguang Wu's automated builds. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Use a private hash table for path lookup in xmit path IB/qib: Fix size of cc_supported_table_entries RDMA/ucma: Convert open-coded equivalent to memdup_user() RDMA/ocrdma: Fix check of GSI CQs RDMA/cma: Use PTR_RET rather than if (IS_ERR(...)) + PTR_ERR
2012-08-01Merge branch 'v4l_for_linus' of ↵Linus Torvalds126-8031/+7073
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: - radio API: add support to work with radio frequency bands - new AM/FM radio drivers: radio-shark, radio-shark2 - new Remote Controller USB driver: iguanair - conversion of several drivers to the v4l2 core control framework - new board additions at existing drivers - the remaining (and vast majority of the patches) are due to drivers/DocBook fixes/cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (154 commits) [media] radio-tea5777: use library for 64bits div [media] tlg2300: Declare MODULE_FIRMWARE usage [media] lgs8gxx: Declare MODULE_FIRMWARE usage [media] xc5000: Add MODULE_FIRMWARE statements [media] s2255drv: Add MODULE_FIRMWARE statement [media] dib8000: move dereference after check for NULL [media] Documentation: Update cardlists [media] bttv: add support for Aposonic W-DVR [media] cx25821: Remove bad strcpy to read-only char* [media] pms.c: remove duplicated include [media] smiapp-core.c: remove duplicated include [media] via-camera: pass correct format settings to sensor [media] rtl2832.c: minor cleanup [media] Add support for the IguanaWorks USB IR Transceiver [media] Minor cleanups for MCE USB [media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry [media] Use a named union in struct v4l2_ioctl_info [media] mceusb: Add Twisted Melon USB IDs [media] staging/media/solo6x10: use module_pci_driver macro [media] staging/media/dt3155v4l: use module_pci_driver macro ... Conflicts: Documentation/feature-removal-schedule.txt
2012-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-16/+84
Pull networking update from David S. Miller: "I think Eric Dumazet and I have dealt with all of the known routing cache removal fallout. Some other minor fixes all around. 1) Fix RCU of cached routes, particular of output routes which require liberation via call_rcu() instead of call_rcu_bh(). From Eric Dumazet. 2) Make sure we purge net device references in cached routes properly. 3) TG3 driver bug fixes from Michael Chan. 4) Fix reported 'expires' value in ipv6 routes, from Li Wei. 5) TUN driver ioctl leaks kernel bytes to userspace, from Mathias Krause." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) ipv4: Properly purge netdev references on uncached routes. ipv4: Cache routes in nexthop exception entries. ipv4: percpu nh_rth_output cache ipv4: Restore old dst_free() behavior. bridge: make port attributes const ipv4: remove rt_cache_rebuild_count net: ipv4: fix RCU races on dst refcounts net: TCP early demux cleanup tun: Fix formatting. net/tun: fix ioctl() based info leaks tg3: Update version to 3.124 tg3: Fix race condition in tg3_get_stats64() tg3: Add New 5719 Read DMA workaround tg3: Fix Read DMA workaround for 5719 A0. tg3: Request APE_LOCK_PHY before PHY access ipv6: fix incorrect route 'expires' value passed to userspace mISDN: Bugfix only few bytes are transfered on a connection seeq: use PTR_RET at init_module of driver bnx2x: remove cast around the kmalloc in bnx2x_prev_mark_path ipv4: clean up put_child ...
2012-08-01rtc/rtc-88pm80x: remove unneed devm_kfreeDevendra Naga1-2/+0
devm_kzalloc() doesn't need a matching devm_kfree(), the freeing mechanism will trigger when driver unloads. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01rtc/rtc-88pm80x: assign ret only when rtc_register_driver failsDevendra Naga1-1/+1
At the probe we are assigning ret to return value of PTR_ERR right after the rtc_register_drive()r, as we would have done it in the if (IS_ERR(ptr)) check, since the function fails and goes inside that case Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01nbd: set SOCK_MEMALLOC for access to PFMEMALLOC reservesMel Gorman1-1/+5
Set SOCK_MEMALLOC on the NBD socket to allow access to PFMEMALLOC reserves so pages backed by NBD, particularly if swap related, can be cleaned to prevent the machine being deadlocked. It is still possible that the PFMEMALLOC reserves get depleted resulting in deadlock but this can be resolved by the administrator by increasing min_free_kbytes. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01netvm: propagate page->pfmemalloc from skb_alloc_page to skbMel Gorman7-8/+7
The skb->pfmemalloc flag gets set to true iff during the slab allocation of data in __alloc_skb that the the PFMEMALLOC reserves were used. If page splitting is used, it is possible that pages will be allocated from the PFMEMALLOC reserve without propagating this information to the skb. This patch propagates page->pfmemalloc from pages allocated for fragments to the skb. It works by reintroducing and expanding the skb_alloc_page() API to take an skb. If the page was allocated from pfmemalloc reserves, it is automatically copied. If the driver allocates the page before the skb, it should call skb_propagate_pfmemalloc() after the skb is allocated to ensure the flag is copied properly. Failure to do so is not critical. The resulting driver may perform slower if it is used for swap-over-NBD or swap-over-NFS but it should not result in failure. [davem@davemloft.net: API rename and consistency] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01mm: factor out memory isolate functionsMinchan Kim1-0/+1
mm/page_alloc.c has some memory isolation functions but they are used only when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. So let's make it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01drivers/media/video/v4l2-ioctl.c: fix buildAndrew Morton1-2/+6
Fix zillions of these: drivers/media/video/v4l2-ioctl.c:1848: error: unknown field 'func' specified in initializer drivers/media/video/v4l2-ioctl.c:1848: warning: missing braces around initializer drivers/media/video/v4l2-ioctl.c:1848: warning: (near initialization for 'v4l2_ioctls[0].<anonymous>') drivers/media/video/v4l2-ioctl.c:1848: warning: initialization makes integer from pointer without a cast drivers/media/video/v4l2-ioctl.c:1848: error: initializer element is not computable at load time drivers/media/video/v4l2-ioctl.c:1848: error: (near initialization for 'v4l2_ioctls[0].<anonymous>.offset') Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6Linus Torvalds17-55/+697
Pull battery updates from Anton Vorontsov: "The tag contains just a few battery-related changes for v3.6. It's is all pretty straightforward, except one thing. One of our patches added thermal support for power supply class, but thermal/ subsystem changed under our feet. We (well, Stephen, that is) caught the issue and it was decided[1] that I'd just delay the battery pull request, and then will fix it up by merging upstream back into battery tree at the specific commit. That's not all though: another[2] small fixup for thermal subsystem was needed to get rid of a warning in power supply subsystem (the warning was not drivers/power's "fault", the thermal registration function just needed a proper const annotation, which is also done by a small commit on top of the merge. So, to sum this up: - The 'master' branch of the battery tree was in the -next tree for weeks, was never rebased, altered etc. It should be all OK; - Although, for-v3.6 tag contains the 'master' branch + merge + the warning fix. [1] http://lkml.org/lkml/2012/6/19/23 [2] http://lkml.org/lkml/2012/6/18/28" * tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits) thermal: Constify 'type' argument for the registration routine olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries olpc-battery: Add VOLTAGE_MAX_DESIGN property charger-manager: Fix build break related to EXTCON lp8727_charger: Move header file into platform_data directory power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT bq27x00_battery: Add support for BQ27425 chip charger-manager: Set current limit of regulator for over current protection charger-manager: Use EXTCON Subsystem to detect charger cables for charging test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties test_power: Add support for USB AC source gpio-charger: Use cansleep version of gpio_set_value bq27x00_battery: Add support for power average and health properties sbs-battery: Don't trigger false supply_changed event twl4030_charger: Allow charger to control the regulator that feeds it twl4030_charger: Add backup-battery charging twl4030_charger: Fix some typos max17042_battery: Support CHARGE_COUNTER power supply attribute smb347-charger: Add constant charge and current properties power_supply: Add constant charge_current and charge_voltage properties ...
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds2-355/+462
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph changes from Sage Weil: "Lots of stuff this time around: - lots of cleanup and refactoring in the libceph messenger code, and many hard to hit races and bugs closed as a result. - lots of cleanup and refactoring in the rbd code from Alex Elder, mostly in preparation for the layering functionality that will be coming in 3.7. - some misc rbd cleanups from Josh Durgin that are finally going upstream - support for CRUSH tunables (used by newer clusters to improve the data placement) - some cleanup in our use of d_parent that Al brought up a while back - a random collection of fixes across the tree There is another patch coming that fixes up our ->atomic_open() behavior, but I'm going to hammer on it a bit more before sending it." Fix up conflicts due to commits that were already committed earlier in drivers/block/rbd.c, net/ceph/{messenger.c, osd_client.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (132 commits) rbd: create rbd_refresh_helper() rbd: return obj version in __rbd_refresh_header() rbd: fixes in rbd_header_from_disk() rbd: always pass ops array to rbd_req_sync_op() rbd: pass null version pointer in add_snap() rbd: make rbd_create_rw_ops() return a pointer rbd: have __rbd_add_snap_dev() return a pointer libceph: recheck con state after allocating incoming message libceph: change ceph_con_in_msg_alloc convention to be less weird libceph: avoid dropping con mutex before fault libceph: verify state after retaking con lock after dispatch libceph: revoke mon_client messages on session restart libceph: fix handling of immediate socket connect failure ceph: update MAINTAINERS file libceph: be less chatty about stray replies libceph: clear all flags on con_close libceph: clean up con flags libceph: replace connection state bits with states libceph: drop unnecessary CLOSED check in socket state change callback libceph: close socket directly from ceph_con_close() ...
2012-08-01[media] radio-tea5777: use library for 64bits divMauro Carvalho Chehab1-3/+5
drivers/built-in.o: In function `radio_tea5777_set_freq': radio-tea5777.c:(.text+0x4d8704): undefined reference to `__udivdi3' Reported-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-31vfio: Add PCI device driverAlex Williamson8-0/+3233
Add PCI device support for VFIO. PCI devices expose regions for accessing config space, I/O port space, and MMIO areas of the device. PCI config access is virtualized in the kernel, allowing us to ensure the integrity of the system, by preventing various accesses while reducing duplicate support across various userspace drivers. I/O port supports read/write access while MMIO also supports mmap of sufficiently sized regions. Support for INTx, MSI, and MSI-X interrupts are provided using eventfds to userspace. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-07-31vfio: Type1 IOMMU implementationAlex Williamson4-0/+768
This VFIO IOMMU backend is designed primarily for AMD-Vi and Intel VT-d hardware, but is potentially usable by anything supporting similar mapping functionality. We arbitrarily call this a Type1 backend for lack of a better name. This backend has no IOVA or host memory mapping restrictions for the user and is optimized for relatively static mappings. Mapped areas are pinned into system memory. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-07-31vfio: VFIO coreAlex Williamson5-0/+1425
VFIO is a secure user level driver for use with both virtual machines and user level drivers. VFIO makes use of IOMMU groups to ensure the isolation of devices in use, allowing unprivileged user access. It's intended that VFIO will replace KVM device assignment and UIO drivers (in cases where the target platform includes a sufficiently capable IOMMU). New in this version of VFIO is support for IOMMU groups managed through the IOMMU core as well as a rework of the API, removing the group merge interface. We now go back to a model more similar to original VFIO with UIOMMU support where the file descriptor obtained from /dev/vfio/vfio allows access to the IOMMU, but only after a group is added, avoiding the previous privilege issues with this type of model. IOMMU support is also now fully modular as IOMMUs have vastly different interface requirements on different platforms. VFIO users are able to query and initialize the IOMMU model of their choice. Please see the follow-on Documentation commit for further description and usage example. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>