Age | Commit message (Collapse) | Author | Files | Lines |
|
commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890 upstream.
Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1]
revealed the long living issue in dw_mmc.c driver, existing since the
time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc:
Add Synopsys DesignWare mmc host driver."), also making kernel boot
broken on platforms using dw_mmc driver with 16K or 64K pages enabled,
with this message in dmesg:
mmcblk: probe of mmc0:0001 failed with error -22
That's happening because mmc_blk_probe() fails when it calls
blk_validate_limits() consequently, which returns the error due to
failed max_segment_size check in this code:
/*
* The maximum segment size has an odd historic 64k default that
* drivers probably should override. Just like the I/O size we
* require drivers to at least handle a full page per segment.
*/
...
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always
sets .max_seg_size to 4 KiB:
mmc->max_seg_size = 0x1000;
The comment in the code above explains why it's incorrect. Arnd
suggested setting .max_seg_size to .max_req_size to fix it, which is
also what some other drivers are doing:
$ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \
wc -l
18
This change is not only fixing the boot with 16K/64K pages, but also
leads to a better MMC performance. The linear write performance was
tested on E850-96 board (eMMC only), before commit [1] (where it's
possible to boot with 16K/64K pages without this fix, to be able to do
a comparison). It was tested with this command:
# dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync
Test results are as follows:
- 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s
- 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s
- 16K pages, .max_seg_size = 4 KiB: 126 MB/s
- 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s
- 64K pages, .max_seg_size = 4 KiB: 138 MB/s
- 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s
Unfortunately, SD card controller is not enabled in E850-96 yet, so it
wasn't possible for me to run the test on some cheap SD cards to check
this patch's impact on those. But it's possible that this change might
also reduce the writes count, thus improving SD/eMMC longevity.
All credit for the analysis and the suggested solution goes to Arnd.
[1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/
Fixes: f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5af2c90ba5629f0424a8d315f75fb8d91713c3c upstream.
gicv2m_of_init() fails to perform an of_node_put() when
of_address_to_resource() fails, leading to a refcount leak.
Address this by moving the error handling path outside of the loop and
making it common to all failure modes.
Fixes: 4266ab1a8ff5 ("irqchip/gic-v2m: Refactor to prepare for ACPI support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240820092843.1219933-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 284b75a3d83c7631586d98f6dede1d90f128f0db upstream.
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.
Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.
Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8321fa75102246d7415a6af441872f6637c93ab upstream.
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f9625 ("virtio_net: bulk free tx skbs")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Shivani: Modified to apply on v4.19.y-v5.10.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c8931ef55bd325052ec496f242aea7f6de47dc9c ]
Struct uvc_frame and interval (u32*) are packaged together on
streaming->formats on a single contiguous allocation.
Right now they are allocated right after uvc_format, without taking into
consideration their required alignment.
This is working fine because both structures have a field with a
pointer, but it will stop working when the sizeof() of any of those
structs is not a multiple of the sizeof(void*).
Enforce that alignment during the allocation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240404-uvc-align-v2-1-9e104b0ecfbd@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4d31653c03b90e51515b1380115d1aedad925dd ]
Callers can pass null in filter (i.e. from returned from the function
wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is
not the case.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99516f76db48e1a9d54cdfed63c1babcee4e71a5 ]
ucsi_register_altmode checks IS_ERR for the alt pointer and treats
NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled,
ucsi_register_displayport returns NULL which causes a NULL pointer
dereference in trace. Rather than return NULL, call
typec_port_register_altmode to register DisplayPort alternate mode
as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240510201244.2968152-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b6b386f9aa936ed0c190446c71cf59d4a507690 ]
Skip submitting URBs, when identical requests were already sent in
tweak_special_requests(). Instead call the completion handler directly
to return the result of the URB.
Even though submitting those requests twice should be harmless, there
are USB devices that react poorly to some duplicated requests.
One example is the ChipIdea controller implementation in U-Boot: The
second SET_CONFIGURATION request makes U-Boot disable and re-enable all
endpoints. Re-enabling an endpoint in the ChipIdea controller, however,
was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget
reinit").
Signed-off-by: Simon Holesch <simon@holesch.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Hongren Zheng <i@zenithal.me>
Tested-by: Hongren Zheng <i@zenithal.me>
Link: https://lore.kernel.org/r/20240519141922.171460-1-simon@holesch.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3eb76e71b16e8ba5277bf97617aef51f5e64dbe4 ]
Address a warning about potential string truncation based on the
string buffer sizes. We can add some hints to the string format
specifier to set limits on the resulting possible string to
squelch the complaints.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240529000259.25775-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
kfd_topology_device
[ Upstream commit 10f624ef239bd136cdcc5bbc626157a57b938a31 ]
Currently oem_id is defined as uint8_t[6] and casted to uint64_t*
in some use case. This would lead code scanner to complain about
access beyond. Re-define it in union to enforce 8-byte size and
alignment to avoid potential issue.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51dfc0a4d609fe700750a62f41447f01b8c9ea50 ]
Clear warning that read mc_data[i-1] may out-of-bounds.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8944acd0f9db33e17f387fdc75d33bb473d7936f ]
Clear warning that read ucode[] may out-of-bounds.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6077aa66fa230d12f37fef01161ef080d13b726 ]
[Why]
For subtraction, coverity reports integer overflow
warning message when variable type is uint32_t.
[How]
Change variable type to int32_t.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b38a4815f79b87efb196cd5121579fc51e29a7fb ]
[WHY & HOW]
num_valid_sets needs to be checked to avoid a negative index when
accessing reader_wm_sets[num_valid_sets - 1].
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84723eb6068c50610c5c0893980d230d7afa2105 ]
[Why]
Coverity reports OVERRUN warning. Should abort amdgpu_dm
initialize.
[How]
Return failure to amdgpu_dm_init.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a5626eeb3b5eec7a36886f9556113dd93ec8ed6 ]
[WHY & HOW]
GPIO_ID_UNKNOWN (-1) is not a valid value for array index and therefore
should be checked in advance.
This fixes 5 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebbc2ada5c636a6a63d8316a3408753768f5aa9f ]
Clear overflowed array index read warning by cast operation.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0d6bd3cd209419cc46ac49562bef1db65d90e70 ]
Assign value to clock to fix the warning below:
"Using uninitialized value res. Field res.clock is uninitialized"
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ca645a2f74a4290527ae27130c8611391b07dbf ]
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d60c429610a14560085d98fa6f4cdb43040ca8f0 ]
This adds a DMI orientation quirk for the OrangePi Neo Linux Gaming
Handheld.
Signed-off-by: Philip Mueller <philm@manjaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715045818.1019979-1-philm@manjaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ]
aac_probe_one() calls hardware-specific init functions through the
aac_driver_ident::init pointer, all of which eventually call down to
aac_init_adapter().
If aac_init_adapter() fails after allocating memory for aac_dev::queues,
it frees the memory but does not clear that member.
After the hardware-specific init function returns an error,
aac_probe_one() goes down an error path that frees the memory pointed to
by aac_dev::queues, resulting.in a double-free.
Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com>
Link: https://bugs.debian.org/1075855
Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support")
Signed-off-by: Ben Hutchings <benh@debian.org>
Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 64a26007a8f51442a9efddf7d98d50e2ca4349cd upstream.
mv88e6xxx_g2_atu_stats_get() takes two parameters. Make the stub
function also take two, otherwise we get compile errors.
Fixes: c5f299d59261 ("net: dsa: mv88e6xxx: global1_atu: Add helper for get next")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove_power_attributes()
commit 3a8839bbb86da7968a792123ed2296d063871a52 upstream.
Device attribute group @usb3_hardware_lpm_attr_group is merged by
add_power_attributes(), but it is not unmerged explicitly, fixed by
unmerging it in remove_power_attributes().
Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240820-sysfs_fix-v2-1-a9441487077e@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd4897bfd14f6a5388b21ba45a066541a0425199 upstream.
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddfcfeba891064b88bb844208b43bef2ef970f0c upstream.
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
releasing remaining devm-managed resources.
Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14e497183df28c006603cc67fd3797a537eef7b9 upstream.
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address.
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2aa765a43817ec8add990f83c8e54a9a5d87aa9c upstream.
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240816075409.23080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a471de516c35219d1722c13367191ce1f120fe9 upstream.
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Link: https://lore.kernel.org/0041DFA5200EFB1B+20240803074619.563116-1-yt@radxa.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b00583ecacb0b51712a5ecd34cf7e6684307c67 upstream.
USB_DEVICE(0x1901, 0x0006) may send data before cdc_acm is ready, which
may be misinterpreted in the default N_TTY line discipline.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Acked-by: Oliver Neuku <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240814072905.2501-1-ian.ray@gehealthcare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f9bb896eab221618927ae6a2f1d566567999839d upstream.
Linux does not write into cmd-db region. This region of memory is write
protected by XPU. XPU may sometime falsely detect clean cache eviction
as "write" into the write protected region leading to secure interrupt
which causes an endless loop somewhere in Trust Zone.
The only reason it is working right now is because Qualcomm Hypervisor
maps the same region as Non-Cacheable memory in Stage 2 translation
tables. The issue manifests if we want to use another hypervisor (like
Xen or KVM), which does not know anything about those specific mappings.
Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC
removes dependency on correct mappings in Stage 2 tables. This patch
fixes the issue by updating the mapping to MEMREMAP_WC.
I tested this on SA8155P with Xen.
Fixes: 312416d9171a ("drivers: qcom: add command DB driver")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180 WoA in EL2
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240718-cmd_db_uncached-v2-1-f6cf53164c90@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit febccb39255f9df35527b88c953b2e0deae50e53 ]
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c64b875fe1e1f6b30e3a15cb74d623349c571001 ]
pn532 devices support an autopoll command, that lets the chip
automatically poll for selected nfc technologies instead of manually
looping through every single nfc technology the user is interested in.
This is faster and less cpu and bus intensive than manually polling.
This adds this autopoll capability to the pn533 driver.
Cc: Johan Hovold <johan@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: febccb39255f ("nfc: pn533: Add poll mod list filling check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0bf2840ccc6efcba82d83b224dcde19dea9f1ee3 ]
This adds hooks for dev_up and dev_down to the phy_ops. They are
optional.
The idea is to inform the phy driver when the nfc chip is really going
to be used. When it is not used, the phy driver can suspend it's
interface to the nfc chip to save some power. The nfc chip is considered
not in use before dev_up and after dev_down.
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: febccb39255f ("nfc: pn533: Add poll mod list filling check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit defd8b3c37b0f9cb3e0f60f47d3d78d459d57fda ]
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a
NULL pointer, but its callers only check for error pointers thus miss
the NULL pointer case.
Fix it by returning an error pointer with the error code carried from
sockfd_lookup().
(I found this bug during code inspection.)
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Cc: Andreas Schultz <aschultz@tpip.net>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f71c84038d39def573744a145c573758f52a949 ]
The same for-loop check for the LINK_LIST_READY bit of an OOB_CTRL
register is used in several places. Factor these out into a single
function to reduce the lines of code.
Change-Id: I20e8f327045a72acc0a83e2d145ae2993ab62915
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a699781c79ec ("ethtool: check device is present when getting link settings")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 upstream.
Two bitmasks in 'struct sdw_slave_prop' - 'source_ports' and
'sink_ports' - define which ports to program in
sdw_program_slave_port_params(). The masks are used to get the
appropriate data port properties ('struct sdw_get_slave_dpn_prop') from
an array.
Bitmasks can be non-continuous or can start from index different than 0,
thus when looking for matching port property for given port, we must
iterate over mask bits, not from 0 up to number of ports.
This fixes allocation and programming slave ports, when a source or sink
masks start from further index.
Fixes: f8101c74aa54 ("soundwire: Add Master and Slave port programming")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240729140157.326450-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d92c7c566dc76d96e0e19e481d926bbe6631c1e upstream.
If the ata_port_alloc() call in ata_host_alloc() fails,
ata_host_release() will get called.
However, the code in ata_host_release() tries to free ata_port struct
members unconditionally, which can lead to the following:
BUG: unable to handle page fault for address: 0000000000003990
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata]
Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41
RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246
RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0
RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68
R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004
R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006
FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? ata_host_release.cold+0x2f/0x6e [libata]
? ata_host_release.cold+0x2f/0x6e [libata]
release_nodes+0x35/0xb0
devres_release_group+0x113/0x140
ata_host_alloc+0xed/0x120 [libata]
ata_host_alloc_pinfo+0x14/0xa0 [libata]
ahci_init_one+0x6c9/0xd20 [ahci]
Do not access ata_port struct members unconditionally.
Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8676a5e796fa18f55897ca36a94b2adf7f73ebd1 upstream.
The function uvc_video_clock_update() supports a single SOF overflow. Or
in other words, the maximum difference between the first ant the last
timestamp can be 4096 ticks or 4.096 seconds.
This results in a maximum value for y2 of: 0x12FBECA00, that overflows
32bits.
y2 = (u32)ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1;
Extend the size of y2 to u64 to support all its values.
Without this patch:
# yavta -s 1920x1080 -f YUYV -t 1/5 -c /dev/video0
Device /dev/v4l/by-id/usb-Shine-Optics_Integrated_Camera_0001-video-index0 opened.
Device `Integrated Camera: Integrated C' on `usb-0000:00:14.0-6' (driver 'uvcvideo') supports video, capture, without mplanes.
Video format set: YUYV (56595559) 1920x1080 (stride 3840) field none buffer size 4147200
Video format: YUYV (56595559) 1920x1080 (stride 3840) field none buffer size 4147200
Current frame rate: 1/5
Setting frame rate to: 1/5
Frame rate set: 1/5
8 buffers requested.
length: 4147200 offset: 0 timestamp type/source: mono/SoE
Buffer 0/0 mapped at address 0x7947ea94c000.
length: 4147200 offset: 4149248 timestamp type/source: mono/SoE
Buffer 1/0 mapped at address 0x7947ea557000.
length: 4147200 offset: 8298496 timestamp type/source: mono/SoE
Buffer 2/0 mapped at address 0x7947ea162000.
length: 4147200 offset: 12447744 timestamp type/source: mono/SoE
Buffer 3/0 mapped at address 0x7947e9d6d000.
length: 4147200 offset: 16596992 timestamp type/source: mono/SoE
Buffer 4/0 mapped at address 0x7947e9978000.
length: 4147200 offset: 20746240 timestamp type/source: mono/SoE
Buffer 5/0 mapped at address 0x7947e9583000.
length: 4147200 offset: 24895488 timestamp type/source: mono/SoE
Buffer 6/0 mapped at address 0x7947e918e000.
length: 4147200 offset: 29044736 timestamp type/source: mono/SoE
Buffer 7/0 mapped at address 0x7947e8d99000.
0 (0) [-] none 0 4147200 B 507.554210 508.874282 242.836 fps ts mono/SoE
1 (1) [-] none 2 4147200 B 508.886298 509.074289 0.751 fps ts mono/SoE
2 (2) [-] none 3 4147200 B 509.076362 509.274307 5.261 fps ts mono/SoE
3 (3) [-] none 4 4147200 B 509.276371 509.474336 5.000 fps ts mono/SoE
4 (4) [-] none 5 4147200 B 509.476394 509.674394 4.999 fps ts mono/SoE
5 (5) [-] none 6 4147200 B 509.676506 509.874345 4.997 fps ts mono/SoE
6 (6) [-] none 7 4147200 B 509.876430 510.074370 5.002 fps ts mono/SoE
7 (7) [-] none 8 4147200 B 510.076434 510.274365 5.000 fps ts mono/SoE
8 (0) [-] none 9 4147200 B 510.276421 510.474333 5.000 fps ts mono/SoE
9 (1) [-] none 10 4147200 B 510.476391 510.674429 5.001 fps ts mono/SoE
10 (2) [-] none 11 4147200 B 510.676434 510.874283 4.999 fps ts mono/SoE
11 (3) [-] none 12 4147200 B 510.886264 511.074349 4.766 fps ts mono/SoE
12 (4) [-] none 13 4147200 B 511.070577 511.274304 5.426 fps ts mono/SoE
13 (5) [-] none 14 4147200 B 511.286249 511.474301 4.637 fps ts mono/SoE
14 (6) [-] none 15 4147200 B 511.470542 511.674251 5.426 fps ts mono/SoE
15 (7) [-] none 16 4147200 B 511.672651 511.874337 4.948 fps ts mono/SoE
16 (0) [-] none 17 4147200 B 511.873988 512.074462 4.967 fps ts mono/SoE
17 (1) [-] none 18 4147200 B 512.075982 512.278296 4.951 fps ts mono/SoE
18 (2) [-] none 19 4147200 B 512.282631 512.482423 4.839 fps ts mono/SoE
19 (3) [-] none 20 4147200 B 518.986637 512.686333 0.149 fps ts mono/SoE
20 (4) [-] none 21 4147200 B 518.342709 512.886386 -1.553 fps ts mono/SoE
21 (5) [-] none 22 4147200 B 517.909812 513.090360 -2.310 fps ts mono/SoE
22 (6) [-] none 23 4147200 B 517.590775 513.294454 -3.134 fps ts mono/SoE
23 (7) [-] none 24 4147200 B 513.298465 513.494335 -0.233 fps ts mono/SoE
24 (0) [-] none 25 4147200 B 513.510273 513.698375 4.721 fps ts mono/SoE
25 (1) [-] none 26 4147200 B 513.698904 513.902327 5.301 fps ts mono/SoE
26 (2) [-] none 27 4147200 B 513.895971 514.102348 5.074 fps ts mono/SoE
27 (3) [-] none 28 4147200 B 514.099091 514.306337 4.923 fps ts mono/SoE
28 (4) [-] none 29 4147200 B 514.310348 514.510567 4.734 fps ts mono/SoE
29 (5) [-] none 30 4147200 B 514.509295 514.710367 5.026 fps ts mono/SoE
30 (6) [-] none 31 4147200 B 521.532513 514.914398 0.142 fps ts mono/SoE
31 (7) [-] none 32 4147200 B 520.885277 515.118385 -1.545 fps ts mono/SoE
32 (0) [-] none 33 4147200 B 520.411140 515.318336 -2.109 fps ts mono/SoE
33 (1) [-] none 34 4147200 B 515.325425 515.522278 -0.197 fps ts mono/SoE
34 (2) [-] none 35 4147200 B 515.538276 515.726423 4.698 fps ts mono/SoE
35 (3) [-] none 36 4147200 B 515.720767 515.930373 5.480 fps ts mono/SoE
Cc: stable@vger.kernel.org
Fixes: 66847ef013cc ("[media] uvcvideo: Add UVC timestamps support")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240610-hwtimestamp-followup-v1-2-f9eaed7be7f0@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be4a2a81b6b90d1a47eaeaace4cc8e2cb57b96c7 upstream.
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space.
Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27ec3c57fcadb43c79ed05b2ea31bc18c72d798a upstream.
mwifiex_band_2ghz and mwifiex_band_5ghz are statically allocated, but
used and modified in driver instances. Duplicate them before using
them in driver instances so that different driver instances do not
influence each other.
This was observed on a board which has one PCIe and one SDIO mwifiex
adapter. It blew up in mwifiex_setup_ht_caps(). This was called with
the statically allocated struct which is modified in this function.
Cc: stable@vger.kernel.org
Fixes: d6bffe8bb520 ("mwifiex: support for creation of AP interface")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240809-mwifiex-duplicate-static-structs-v1-1-6837b903b1a4@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c38a62f15e595346a1106025722869e87ffe044 upstream.
pinmux_generic_get_function() can return NULL and the pointer 'function'
was dereferenced without checking against NULL. Add checking of pointer
'function' in pcs_get_function().
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/20240808041355.2766009-1-make24@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88a9a467c548d0b3c7761b4fd54a68e70f9c0944 upstream.
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Vamsi Krishna Brahmajosyula <vamsi-krishna.brahmajosyula@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99d3bf5f7377d42f8be60a6b9cb60fb0be34dceb upstream.
syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).
Since nobody knows possible max slots, this patch chose 1024.
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c33663af9ad115f90c076a1828129a3fbadea98 upstream.
This patch adds code to check HCI_UART_PROTO_READY flag before
accessing hci_uart->proto. It fixes the race condition in
hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO.
This issue bug found by Yu Hao and Weiteng Chen:
BUG: general protection fault in hci_uart_tty_ioctl [1]
The information of C reproducer can also reference the link [2]
Reported-by: Yu Hao <yhao016@ucr.edu>
Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1]
Reported-by: Weiteng Chen <wchen130@ucr.edu>
Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2]
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6275c7bc8dd07644ea8142a1773d826800f0f3f7 upstream.
Fix a race condition if the clock provider comes up after mmc is probed,
this causes mmc to fail without retrying.
When given the DEFER error from the clk source, pass it on up the chain.
Fixes: f90a0612f0e1 ("mmc: dw_mmc: lookup for optional biu and ciu clocks")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240811212212.123255-1-ben.whitten@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80a1e7b83bb1834b5568a3872e64c05795d88f31 upstream.
It is done everywhere in cxgb4 code, e.g. in is_filter_exact_match()
There is no reason it should not be done here
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Cc: stable@vger.kernel.org
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240819075408.92378-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5554725f30475b05b5178b998366f11ecb50c7f upstream.
Currently, rumble is only supported via bluetooth on a single xbox
controller, called 'model 1708'. On the back of the device, it's named
'wireless controller for xbox one'. However, in 2021, Microsoft released
a firmware update for this controller. As part of this update, the HID
descriptor of the device changed. The product ID was also changed from
0x02fd to 0x0b20. On this controller, rumble was supported via
hid-microsoft, which matched against the old product id (0x02fd). As a
result, the firmware update broke rumble support on this controller.
See:
https://news.xbox.com/en-us/2021/09/08/xbox-controller-firmware-update-rolling-out-to-insiders-starting-today/
The hid-microsoft driver actually supports rumble on the new firmware,
as well. So simply adding new product id is sufficient to bring back
this support.
After discussing further with the xbox team, it was pointed out that
another xbox controller, xbox elite series 2, can be supported in a
similar way.
Add rumble support for all of these devices in this patch. Two of the
devices have received firmware updates that caused their product id's to
change. Both old and new firmware versions of these devices were tested.
The tested controllers are:
1. 'wireless controller for xbox one', model 1708
2. 'xbox wireless controller', model 1914. This is also sometimes
referred to as 'xbox series S|X'.
3. 'elite series 2', model 1797.
The tested configurations are:
1. model 1708, pid 0x02fd (old firmware)
2. model 1708, pid 0x0b20 (new firmware)
3. model 1914, pid 0x0b13
4. model 1797, pid 0x0b05 (old firmware)
5. model 1797, pid 0x0b22 (new firmware)
I verified rumble support on both bluetooth and usb.
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b8f9c1fb464968a5b18d3acc1da8c00bad24fad upstream.
The Wacom driver maps the HID_DG_TWIST usage to ABS_Z (rather than ABS_RZ)
for historic reasons. When the code to support twist was introduced in
commit 50066a042da5 ("HID: wacom: generic: Add support for height, tilt,
and twist usages"), we were careful to write it in such a way that it had
HID calculate the resolution of the twist axis assuming ABS_RZ instead
(so that we would get correct angular behavior). This was broken with
the introduction of commit 08a46b4190d3 ("HID: wacom: Set a default
resolution for older tablets"), which moved the resolution calculation
to occur *before* the adjustment from ABS_Z to ABS_RZ occurred.
This commit moves the calculation of resolution after the point that
we are finished setting things up for its proper use.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 08a46b4190d3 ("HID: wacom: Set a default resolution for older tablets")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a1e627af32ed60713941cbfc8075d44cad07f6dd ]
If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success.
Fixes: 2661081f5ab9 ("mmc_test: highmem tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8c90be28-67b4-4b0d-a105-034dc72a0b31@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df24373435f5899a2a98b7d377479c8d4376613b ]
DPU debugging macros need to be converted to a proper drm_debug_*
macros, however this is a going an intrusive patch, not suitable for a
fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER
to make sure that DPU debugging messages always end up in the drm debug
messages and are controlled via the usual drm.debug mask.
I don't think that it is a good idea for a generic DPU_DEBUG macro to be
tied to DRM_UT_KMS. It is used to report a debug message from driver, so by
default it should go to the DRM_UT_DRIVER channel. While refactoring
debug macros later on we might end up with particular messages going to
ATOMIC or KMS, but DRIVER should be the default.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/606932/
Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|