Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit cd0a2c6a081ff67007323725b9ff07d9934b1ed8 ]
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-4-619a28148e5c@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3b4695ff47c4964d4ccb930890c9ffd8e455e20 ]
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-3-619a28148e5c@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 275fafe58faa7fdb10fa245412696ecef676aac5 ]
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-2-619a28148e5c@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef4a9204d594fe959cdbc7418273caf4001535c8 ]
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-1-619a28148e5c@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c534b63bede6cb987c2946ed4d0b0013a52c5ba7 ]
In vc4_hdmi_audio_init() of_get_address() may return
NULL which is later dereferenced. Fix this bug by adding NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409075622.11783-1-amishin@t-argos.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a1f95aede6285dba6dd036d907196f35ae3a11ea ]
In malidp_mw_connector_reset, new memory is allocated with kzalloc, but
no check is performed. In order to prevent null pointer dereferencing,
ensure that mw_state is checked before calling
__drm_atomic_helper_connector_reset.
Fixes: 8cbc5caf36ef ("drm: mali-dp: Add writeback connector")
Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240407063053.5481-1-qq810974084@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b621e9e9e148c0928ab109ac3d4b81487469acb ]
The allocation failure of mycs->yuv_scaler_binary in load_video_binaries()
is followed with a dereference of mycs->yuv_scaler_binary after the
following call chain:
sh_css_pipe_load_binaries()
|-> load_video_binaries(mycs->yuv_scaler_binary == NULL)
|
|-> sh_css_pipe_unload_binaries()
|-> unload_video_binaries()
In unload_video_binaries(), it calls to ia_css_binary_unload with argument
&pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the
same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer
dereference is triggered.
Link: https://lore.kernel.org/r/20240118151303.3828292-1-alexious@zju.edu.cn
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51084f89d687e14d96278241e5200cde4b0985c7 ]
There is no reason to prohibit sh7760fb from being built as a
loadable module as suggested by Geert, so change the config symbol
from bool to tristate to allow that and change the FB dependency as
needed.
Fixes: f75f71b2c418 ("fbdev/sh7760fb: Depend on FB=y")
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34d7bf1c8e59f5fbf438ee32c96389ebe41ca2e8 ]
When support for streams was added to the V4L2 subdev API, the
v4l2_subdev_crop structure was extended with a stream field, but the
field was not handled in the core code that translates the
VIDIOC_SUBDEV_[GS]_CROP ioctls to the selection API. Fix it.
Fixes: 2f91e10ee6fd ("media: subdev: add stream based configuration")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 545b215736c5c4b354e182d99c578a472ac9bfce ]
Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text)
Fixes: c5254e72b8ed ("[media] media: Driver for Toshiba et8ek8 5MP sensor")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a069f79bfa6ec1ea0744981ea8425c8a25322579 ]
Call devm_request_irq() before registering the async notifier, as otherwise
it would be possible to use the device before the interrupts could be
delivered to the driver.
Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d1a7493343cc00d9019880b686e4e0a0f649531 ]
As documented in the description of the transfer() function of
"struct drm_dp_aux", the transfer() function can be called at any time
regardless of the state of the DP port. Specifically if the kernel has
the DP AUX character device enabled and userspace accesses
"/dev/drm_dp_auxN" directly then the AUX transfer function will be
called regardless of whether a DP device is connected.
For eDP panels we have a special rule where we wait (with a 5 second
timeout) for HPD to go high. This rule was important before all panels
drivers were converted to call wait_hpd_asserted() and actually can be
removed in a future commit.
For external DP devices we never checked for HPD. That means that
trying to access the DP AUX character device (AKA `hexdump -C
/dev/drm_dp_auxN`) would very, very slowly timeout. Specifically on my
system:
$ time hexdump -C /dev/drm_dp_aux0
hexdump: /dev/drm_dp_aux0: Connection timed out
real 0m8.200s
We want access to the drm_dp_auxN character device to fail faster than
8 seconds when no DP cable is plugged in.
Let's add a test to make transfers fail right away if a device isn't
plugged in. Rather than testing the HPD line directly, we have the
dp_display module tell us when AUX transfers should be enabled so we
can handle cases where HPD is signaled out of band like with Type C.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/583127/
Link: https://lore.kernel.org/r/20240315143621.v2.1.I16aff881c9fe82b5e0fc06ca312da017aa7b5b3e@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22578178e5dd6d3aa4490879df8b6c2977d980be ]
Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and
pre-emphasis to 2, while the real maximum value for the sum of the
voltage swing and pre-emphasis is 3. Fix the DP code to remove this
limitation.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/577006/
Link: https://lore.kernel.org/r/20240203-dp-swing-3-v1-1-6545e1706196@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 290680c2da8061e410bcaec4b21584ed951479af ]
Multiple WMI events can be received concurrently, so multiple instances
of xiaomi_wmi_notify() can be active at the same time. Since the input
device is shared between those handlers, the key input sequence can be
disturbed.
Fix this by protecting the key input sequence with a mutex.
Compile-tested only.
Fixes: edb73f4f0247 ("platform/x86: wmi: add Xiaomi WMI key driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240402143059.8456-2-W_Armin@gmx.de
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 935a92a1c400285545198ca2800a4c6c519c650a ]
In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is
assigned to mhdp_state->current_mode, and there is a dereference of it in
drm_mode_set_name(), which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate().
Fix this bug add a check of mhdp_state->current_mode.
Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408125810.21899-1-amishin@t-argos.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1820e16a3019b6258e6009d34432946a6ddd0a90 ]
Increase the size of led_names so it can fit any valid v4l2 device name.
Fixes:
drivers/media/radio/radio-shark2.c:197:17: warning: ‘%s’ directive output may be truncated writing up to 35 bytes into a region of size 32 [-Wformat-truncation=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a742c6010d136cb6c441a0f1dd2bfbfae3c4df2 ]
clang-19 warns about mixing two enum types here:
drivers/media/platform/renesas/rcar-vin/rcar-vin.h:296:12: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
drivers/media/platform/renesas/rcar-vin/rcar-core.c:216:18: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
drivers/media/platform/renesas/rcar-vin/rcar-vin.h:296:12: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
drivers/media/platform/renesas/rcar-vin/rcar-vin.h:296:12: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
This one is intentional, and there is already a cast to work around another
warning, so address this by adding another cast.
Fixes: 406bb586dec0 ("media: rcar-vin: Add r8a779a0 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 810dd605e917c716f6f83e6cd8ea23d9155d32a2 ]
Need to remove links when unregistering devices.
Fixes: ac7da4a73b10 ("media: staging: media: starfive: camss: Register devices")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bb1fd7eddcab2d28cfc11eb20f1029154dac718 ]
The return value of dvb_ca_en50221_init() is not checked here that may
cause undefined behavior in case of nonzero value return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 25aee3debe04 ("[media] Rename media/dvb as media/pci")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 688cf598665851b9e8cb5083ff1d208ce43d10ff ]
Building with W=1 shows that a couple of variables in this driver are only
used in certain configurations:
drivers/video/fbdev/sis/init301.c:239:28: error: 'SiS_Part2CLVX_6' defined but not used [-Werror=unused-const-variable=]
239 | static const unsigned char SiS_Part2CLVX_6[] = { /* 1080i */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:230:28: error: 'SiS_Part2CLVX_5' defined but not used [-Werror=unused-const-variable=]
230 | static const unsigned char SiS_Part2CLVX_5[] = { /* 750p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:211:28: error: 'SiS_Part2CLVX_4' defined but not used [-Werror=unused-const-variable=]
211 | static const unsigned char SiS_Part2CLVX_4[] = { /* PAL */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:192:28: error: 'SiS_Part2CLVX_3' defined but not used [-Werror=unused-const-variable=]
192 | static const unsigned char SiS_Part2CLVX_3[] = { /* NTSC, 525i, 525p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:184:28: error: 'SiS_Part2CLVX_2' defined but not used [-Werror=unused-const-variable=]
184 | static const unsigned char SiS_Part2CLVX_2[] = {
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:176:28: error: 'SiS_Part2CLVX_1' defined but not used [-Werror=unused-const-variable=]
176 | static const unsigned char SiS_Part2CLVX_1[] = {
| ^~~~~~~~~~~~~~~
This started showing up after the definitions were moved into the
source file from the header, which was not flagged by the compiler.
Move the definition into the appropriate #ifdef block that already
exists next to them.
Fixes: 5908986ef348 ("video: fbdev: sis: avoid mismatched prototypes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01a2c5123e27b3c4685bf2fc4c2e879f6e0c7b33 ]
In the case where `conn_routes` is true we allocate an extra slot in
the `ddp_comp` array but mtk_drm_crtc_create() never seemed to
initialize it in the test case I ran. For me, this caused a later
crash when we looped through the array in mtk_drm_crtc_mode_valid().
This showed up for me when I booted with `slub_debug=FZPUA` which
poisons the memory initially. Without `slub_debug` I couldn't
reproduce, presumably because the later code handles the value being
NULL and in most cases (not guaranteed in all cases) the memory the
allocator returned started out as 0.
It really doesn't hurt to initialize the array with devm_kcalloc()
since the array is small and the overhead of initting a handful of
elements to 0 is small. In general initting memory to zero is a safer
practice and usually it's suggested to only use the non-initting alloc
functions if you really need to.
Let's switch the function to use an allocation function that zeros the
memory. For me, this avoids the crash.
Fixes: 01389b324c97 ("drm/mediatek: Add connector dynamic selection capability")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240328092248.1.I2e73c38c0f264ee2fa4a09cdd83994e37ba9f541@changeid/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e4350095e8ab2577ee05f8c3b044e661b5af9a0 ]
Add a check to mtk_drm_gem_init if we attempt to allocate a GEM object
of 0 bytes. Currently, no such check exists and the kernel will panic if
a userspace application attempts to allocate a 0x0 GBM buffer.
Tested by attempting to allocate a 0x0 GBM buffer on an MT8188 and
verifying that we now return EINVAL.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Justin Green <greenjustin@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240307180051.4104425-1-greenjustin@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfbc68e4d8695497f858a45a142665e22a512ea3 ]
Playing 4K media with 59.94 fractional rate (typically VP9) causes the screen to lose
sync with the following error reported in the system log:
[ 89.610280] Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
Change the fractional rate calculation to stop DIV_ROUND_CLOSEST rounding down which
results in vclk freq failing to match correctly.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240109230704.4120561-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109230704.4120561-1-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26c8cfb9d1e4b252336d23dd5127a8cbed414a32 ]
The name of the overlay does not fit into the fixed-length field:
drivers/video/fbdev/sh_mobile_lcdcfb.c:1577:2: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 25
Make it short enough by changing the string.
Fixes: c5deac3c9b22 ("fbdev: sh_mobile_lcdc: Implement overlays support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55679cc22e60e8ec23b2340248389022798416cd ]
The init sequence specifies the 0x11 and 0x29 dsi commands, which are
the exit-sleep and display-on commands.
In the actual prepare step the driver already uses the appropriate
function calls for those, so drop the duplicates.
Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-2-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80cc8c0d09e6bab3bd016ddaccd0570cadbe1891 ]
Similar to other variants, the LTK050H3148W wants to run in video mode
when displaying data. So far only the Synopsis DSI driver was using this
panel and it is always switching to video mode, independent of this flag
being set.
Other DSI drivers might handle this differently, so add the flag.
Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07b9d0144fff9af08b8dcd0ae134510bfd539e42 ]
The array size calculation in pvr_vm_mips_fini() appears to be incorrect based on
taking the size of the pointer rather than the size of the array, which manifests
as a warning about signed integer overflow:
In file included from include/linux/kernel.h:16,
from drivers/gpu/drm/imagination/pvr_rogue_fwif.h:10,
from drivers/gpu/drm/imagination/pvr_ccb.h:7,
from drivers/gpu/drm/imagination/pvr_device.h:7,
from drivers/gpu/drm/imagination/pvr_vm_mips.c:4:
drivers/gpu/drm/imagination/pvr_vm_mips.c: In function 'pvr_vm_mips_fini':
include/linux/array_size.h:11:25: error: overflow in conversion from 'long unsigned int' to 'int' changes value from '18446744073709551615' to '-1' [-Werror=overflow]
11 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
| ^
drivers/gpu/drm/imagination/pvr_vm_mips.c:106:24: note: in expansion of macro 'ARRAY_SIZE'
106 | for (page_nr = ARRAY_SIZE(mips_data->pt_pages) - 1; page_nr >= 0; page_nr--) {
| ^~~~~~~~~~
Just use the number of array elements directly here, and in the corresponding
init function for consistency.
Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/lkml/9df9e4f87727399928c068dbbf614c9895ae15f9.camel@imgtec.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6819db94e1cd3ce24a432f3616cd563ed0c4eaba ]
The function hynix_nand_rr_init() should probably return an error code.
Judging by the usage, it seems that the return code is passed up
the call stack.
Right now, it always returns 0 and the function hynix_nand_cleanup()
in hynix_nand_init() has never been called.
Found by RASU JSC and Linux Verification Center (linuxtesting.org)
Fixes: 626994e07480 ("mtd: nand: hynix: Add read-retry support for 1x nm MLC NANDs")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240313102721.1991299-1-korotkov.maxim.s@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mtd_otp_nvmem_add()
[ Upstream commit d44f0bbbd8d182debcce88bda55b05269f3d33d6 ]
Jump to the error reporting code in mtd_otp_nvmem_add() if the
mtd_otp_size() call fails. Without this fix, the error is not logged.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240313173425.1325790-2-aapo.vienamo@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a43dbeaba81eb645a12a004c67722c632ed0d94b ]
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cca4 ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
function
[ Upstream commit 63ae548f1054a0b71678d0349c7dc9628ddd42ca ]
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Fixes: b629596072e5 ("drm/amd/display: Build unity lut for shaper")
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Charlene Liu <Charlene.Liu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e842d55bad7794823a50f24fd645b58f2ef93ab ]
When the atna33xc20 driver was first written the resume code never
returned an error. If there was a problem waiting for HPD it just
printed a warning and moved on. This changed in response to review
feedback [1] on a future patch but I accidentally didn't account for
rolling back the regulator enable in the error cases. Do so now.
[1] https://lore.kernel.org/all/5f3cf3a6-1cc2-63e4-f76b-4ee686764705@linaro.org/
Fixes: 3b5765df375c ("drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux")
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313-homestarpanel-regulator-v1-1-b8e3a336da12@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8df1ddb5bf11ab820ad991e164dab82c0960add9 ]
If an eDP panel is not powered on then any attempts to talk to it over
the DP AUX channel will timeout. Unfortunately these attempts may be
quite slow. Userspace can initiate these attempts either via a
/dev/drm_dp_auxN device or via the created i2c device.
Making the DP AUX drivers timeout faster is a difficult proposition.
In theory we could just poll the panel's HPD line in the AUX transfer
function and immediately return an error there. However, this is
easier said than done. For one thing, there's no hard requirement to
hook the HPD line up for eDP panels and it's OK to just delay a fixed
amount. For another thing, the HPD line may not be fast to probe. On
parade-ps8640 we need to wait for the bridge chip's firmware to boot
before we can get the HPD line and this is a slow process.
The fact that the transfers are taking so long to timeout is causing
real problems. The open source fwupd daemon sometimes scans DP busses
looking for devices whose firmware need updating. If it happens to
scan while a panel is turned off this scan can take a long time. The
fwupd daemon could try to be smarter and only scan when eDP panels are
turned on, but we can also improve the behavior in the kernel.
Let's let eDP panels drivers specify that a panel is turned off and
then modify the common AUX transfer code not to attempt a transfer in
this case.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
Stable-dep-of: 5e842d55bad7 ("drm/panel: atna33xc20: Fix unbalanced regulator in the case HPD doesn't assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 172695f145fb4798ab605e8a73f6e87711930124 ]
In case the LCDIF is enabled in DT but unused, the clocks used by the
LCDIF are not enabled. Those clocks may even have a use count of 0 in
case there are no other users of those clocks. This can happen e.g. in
case the LCDIF drives HDMI bridge which has no panel plugged into the
HDMI connector.
Do not attempt to disable clocks in the suspend callback and re-enable
clocks in the resume callback unless the LCDIF is enabled and was in
use before the system entered suspend, otherwise the driver might end
up trying to disable clocks which are already disabled with use count
0, and would trigger a warning from clock core about this condition.
Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions
internally perform the clocks disable and enable operations and act
as runtime PM hooks too.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01c0cce88c5480cc2505b79330246ef12eda938f ]
Commit 95da53d63dcf ("drm/omapdrm: Use regular fbdev I/O helpers")
stopped console from updating for command mode displays because there is
no damage handling in fb_sys_write() unlike we had earlier in
drm_fb_helper_sys_write().
Let's fix the issue by adding FB_GEN_DEFAULT_DEFERRED_DMAMEM_OPS and
FB_DMAMEM_HELPERS_DEFERRED as suggested by Thomas. We cannot use the
FB_DEFAULT_DEFERRED_OPS as fb_deferred_io_mmap() won't work properly
for write-combine.
Fixes: 95da53d63dcf ("drm/omapdrm: Use regular fbdev I/O helpers")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228063540.4444-3-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 632bac50544c0929ced9eed41e7d04c08adecbb0 ]
The framebuffer console stopped updating with commit f231af498c29
("drm/fb-helper: Disconnect damage worker from update logic").
Let's fix the issue by implementing fb_dirty similar to what was done
with commit 039a72ce7e57 ("drm/i915/fbdev: Implement fb_dirty for intel
custom fb helper").
Fixes: f231af498c29 ("drm/fb-helper: Disconnect damage worker from update logic")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228063540.4444-2-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97252d0a4bfbb07079503d059f7522d305fe0f7a ]
I've recently been seeing some unexplained GSP errors on my RTX 6000 from
failed aux transactions:
[ 132.915867] nouveau 0000:1f:00.0: gsp: cli:0xc1d00002 obj:0x00730000
ctrl cmd:0x00731341 failed: 0x0000ffff
While the cause of these is not yet clear, these messages made me notice
that the aux transactions causing these transactions were succeeding - not
failing. As it turns out, this is because we're currently not returning the
correct variable when r535_dp_aux_xfer() hits an error - causing us to
never propagate GSP errors for failed aux transactions to userspace.
So, let's fix that.
Fixes: 4ae3a20102b2 ("nouveau/gsp: don't free ctrl messages on errors")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240315212104.776936-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2c71b711e7efc6478976233768bdbc3386e6dce ]
Volteer devices in the collabora lab are categorized under the
asus-cx9400-volteer device type. The majority of these units
has an Intel Core i5-1130G7 CPU, while some of them have a
Intel Core i7-1160G7 CPU instead. So due to this difference,
new device type template is added for the Intel Core i5-1130G7
and i7-1160G7 variants of the Acer Chromebook Spin 514 (CP514-2H)
volteer Chromebooks. So update the same in drm-ci.
https://gitlab.collabora.com/lava/lava/-/merge_requests/149
Fixes: 0119c894ab0d ("drm: Add initial ci/ subdirectory")
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307021841.100561-1-vignesh.raman@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e18aeeda0b6905c333df5a0566b99f5c84426098 ]
For a given bridge pipeline if any bridge sets pre_enable_prev_first
flag then the pre_enable for the previous bridge will be called before
pre_enable of this bridge and opposite is done for post_disable.
These are the potential bridge flags to alter bridge init order in order
to satisfy the MIPI DSI host and downstream panel or bridge to function.
However the existing pre_enable_prev_first logic with associated bridge
ordering has broken for both pre_enable and post_disable calls.
[pre_enable]
The altered bridge ordering has failed if two consecutive bridges on a
given pipeline enables the pre_enable_prev_first flag.
Example:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flag
on each iteration and assigned the previou bridge to limit pointer
if the bridge doesn't enable pre_enable_prev_first flags.
If control found Bridge 2 is pre_enable_prev_first then the iteration
looks for Bridge 3 and found it is not pre_enable_prev_first and assigns
it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3
and Bridge 2 and assign iter pointer with limit which is Bridge 4.
Here is the actual problem, for the next iteration control look for
Bridge 5 instead of Bridge 4 has iter pointer in previous iteration
moved to Bridge 4 so this iteration skips the Bridge 4. The iteration
found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned
to Encoder. From next iteration Encoder skips as it is the last bridge
for reverse order pipeline.
So, the resulting pre_enable bridge order would be,
- Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5.
This patch fixes this by assigning limit to next pointer instead of
previous bridge since the iteration always looks for bridge that does
NOT request prev so assigning next makes sure the last bridge on a
given iteration what exactly the limit bridge is.
So, the resulting pre_enable bridge order with fix would be,
- Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4,
Encoder.
[post_disable]
The altered bridge ordering has failed if two consecutive bridges on a
given pipeline enables the pre_enable_prev_first flag.
Example:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
In this example Bridge 5 and Bridge 4 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flags
on each iteration and assigned the previou bridge to next and next to
limit pointer if the bridge does enable pre_enable_prev_first flag.
If control starts from Bridge 6 then it found next Bridge 5 is
pre_enable_prev_first and immediately the next assigned to previous
Bridge 6 and limit assignments to next Bridge 6 and call post_enable
of Bridge 6 even though the next consecutive Bridge 5 is enabled with
pre_enable_prev_first. This clearly misses the logic to find the state
of next conducive bridge as everytime the next and limit assigns
previous bridge if given bridge enabled pre_enable_prev_first.
So, the resulting post_disable bridge order would be,
- Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1,
Panel.
This patch fixes this by assigning next with previou bridge only if the
bridge doesn't enable pre_enable_prev_first flag and the next further
assign it to limit. This way we can find the bridge that NOT requested
prev to disable last.
So, the resulting pre_enable bridge order with fix would be,
- Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1,
Panel.
Validated the bridge init ordering by incorporating dummy bridges in
the sun6i-mipi-dsi pipeline
Fixes: 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d8e45f2929b94099913eb66c3ebb18b5063e9421 ]
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a292ba981324ec790eb671df1c64fae5c98c4b3d ]
Currently, XSK control path in ice driver calls directly
ice_vsi_cfg_txq() whereas we have ice_vsi_cfg_single_txq() for that
purpose. Use the latter from XSK side and make ice_vsi_cfg_txq() static.
ice_vsi_cfg_txq() resides in ice_base.c and is rather big, so to reduce
the code churn let us move the callers of it from ice_lib.c to
ice_base.c.
This change puts ice_qp_ena() on nice diet due to the checks and
operations that ice_vsi_cfg_single_{r,t}xq() do internally.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-182 (-182)
Function old new delta
ice_xsk_pool_setup 2165 1983 -182
Total: Before=472597, After=472415, chg -0.04%
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e5fb691faee1d43ee13d4ce2666b0a05e1555b3 ]
Currently, XSK control path in ice driver calls directly
ice_vsi_cfg_rxq() whereas we have ice_vsi_cfg_single_rxq() for that
purpose. Use the latter from XSK side and make ice_vsi_cfg_rxq() static.
ice_vsi_cfg_rxq() resides in ice_base.c and is rather big, so to reduce
the code churn let us move two callers of it from ice_lib.c to
ice_base.c.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.
Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a189f0ee6685457528db7a36ded3085e5d13ddc3 ]
Return -ENOMEM on allocation failure. Don't return success.
Fixes: cda0d6a198e2 ("Bluetooth: qca: fix info leak when fetching fw build id")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aea27a92a41dae14843f92c79e9e42d8f570105c ]
The blamed commit started to use the ptp workqueue to get the second
part of the timestamp. And when the port was set down, then this
workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING
is not enabled, then the ptp_clock is not initialized so then it would
crash when it would try to access the delayed work.
So then basically by setting up and then down the port, it would crash.
The fix consists in checking if the ptp_clock is initialized and only
then cancel the delayed work.
Fixes: cc7554954848 ("net: micrel: Change to receive timestamp in the frame for lan8841")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36ac9e7f2e5786bd37c5cd91132e1f39c29b8197 ]
Reinitialize the whole EST structure would also reset the mutex
lock which is embedded in the EST structure, and then trigger
the following warning. To address this, move the lock to struct
stmmac_priv. We also need to reacquire the mutex lock when doing
this initialization.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068
Modules linked in:
CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0xd84/0x1068
lr : __mutex_lock+0xd84/0x1068
sp : ffffffc0864e3570
x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003
x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac
x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff
x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000
x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8
x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698
x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001
x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027
x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
__mutex_lock+0xd84/0x1068
mutex_lock_nested+0x28/0x34
tc_setup_taprio+0x118/0x68c
stmmac_setup_tc+0x50/0xf0
taprio_change+0x868/0xc9c
Fixes: b2aae654a479 ("net: stmmac: add mutex lock to protect est parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240513014346.1718740-2-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ca63ffdb94ba2bac4c23c8609aabd7edd03c312 ]
Report taprio offload status. This includes per txq and global
counters of window_drops and tx_overruns.
Window_drops count include count of frames dropped because of
queueMaxSDU setting and HLBF error. Transmission overrun counter
inform the user application whether any packets are currently being
transmitted on a particular queue during a gate-close event.DWMAC IPs
takes care Transmission overrun won't happen hence this is always 0.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 36ac9e7f2e57 ("net: stmmac: move the EST lock to struct stmmac_priv")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd5a6a71313e27c4f601526081b69d4e76f03dea ]
Keep per Tx-queue error count on Head-Of-Line Blocking due to frame
size(HLBF) error. The MAC raises HLBF error on one or more queues
when none of the time Intervals of open-gates in the GCL is greater
than or equal to the duration needed for frame transmission and by
default drops those packets that causes HLBF error. EST_FRM_SZ_ERR
register provides the One Hot encoded Queue numbers that have the
Frame Size related error.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 36ac9e7f2e57 ("net: stmmac: move the EST lock to struct stmmac_priv")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5c3e1bfc9e0ee72af528df8d773980f4855938a ]
Add support for configuring queueMaxSDU. As DWMAC IPs doesn't support
queueMaxSDU table handle this in the SW. The maximum 802.3 frame size
that is allowed to be transmitted by any queue is queueMaxSDU +
16 bytes (i.e. 6 bytes SA + 6 bytes DA + 4 bytes FCS).
Inspired from intel i225 driver.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 36ac9e7f2e57 ("net: stmmac: move the EST lock to struct stmmac_priv")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2e0c58b25a0a0c37ec643255558c5af4450c9f5 ]
There is a deadlock issue found in sungem driver, please refer to the
commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid
deadlocks"). The root cause of the issue is that netpoll is in atomic
context and disable_irq() is called by .ndo_poll_controller interface
of sungem driver, however, disable_irq() might sleep. After analyzing
the implementation of fec_poll_controller(), the fec driver should have
the same issue. Due to the fec driver uses NAPI for TX completions, the
.ndo_poll_controller is unnecessary to be implemented in the fec driver,
so fec_poll_controller() can be safely removed.
Fixes: 7f5c6addcdc0 ("net/fec: add poll controller function for fec nic")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240511062009.652918-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|