| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit c408b3d1d9bbc7de5fb0304fea424ef2539da616 ]
In cur_state_store(), the new state of the cooling device is received
from user-space and is not validated by the thermal core but the same is
left for the individual drivers to take care of. Apart from duplicating
the code it leaves possibility for introducing bugs where a driver may
not do it right.
Lets make the thermal core check the new state itself and store the max
value in the cooling device structure.
Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 6c54b7bc8a31 ("thermal: core: call put_device() only after device_register() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b ]
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9be182da0a7526f1b9a3777a336f83baa2e64d23 ]
In test_async_probe_init, second set of asynchronous devices are saved
in sync_dev[sync_id], which should be async_dev[async_id].
This makes these devices not unregistered when exit.
> modprobe test_async_driver_probe && \
> modprobe -r test_async_driver_probe && \
> modprobe test_async_driver_probe
...
> sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4'
> kobject_add_internal failed for test_async_driver.4 with -EEXIST,
don't try to register things with the same name in the same directory.
Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221125063541.241328-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36225a7c72e9e3e1ce4001b6ce72849f5c9a2d3b ]
I got the following WARNING message while removing driver(ds2482):
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire]
WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0
CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307
RIP: 0010:__might_sleep+0x98/0xa0
Call Trace:
exit_signals+0x6c/0x550
do_exit+0x2b4/0x17e0
kthread_exit+0x52/0x60
kthread+0x16d/0x1e0
ret_from_fork+0x1f/0x30
The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(),
set it to TASK_RUNNING when it breaks out of the loop to avoid the
warning.
Fixes: 3c52e4e62789 ("W1: w1_process, block or sleep")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205101558.3599162-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25d5648802f12ae486076ceca5d7ddf1fef792b2 ]
I got a deadloop report while doing device(ds2482) add/remove test:
[ 162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
...
__w1_remove_master_device() can't return, because the dev->refcnt is not zero.
w1_add_master_device() |
w1_alloc_dev() |
atomic_set(&dev->refcnt, 2) |
kthread_run() |
|__w1_remove_master_device()
| kthread_stop()
// KTHREAD_SHOULD_STOP is set, |
// threadfn(w1_process) won't be |
// called. |
kthread() |
| // refcnt will never be 0, it's deadloop.
| while (atomic_read(&dev->refcnt)) {...}
After calling w1_add_master_device(), w1_process() is not really
invoked, before w1_process() starting, if kthread_stop() is called
in __w1_remove_master_device(), w1_process() will never be called,
the refcnt can not be decreased, then it causes deadloop in remove
function because of non-zero refcnt.
We need to make sure w1_process() is really started, so move the
set refcnt into w1_process() to fix this problem.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205080434.3149205-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39af728649b05e88a2b40e714feeee6451c3f18e ]
The 'parent' returned by fwnode_graph_get_port_parent()
with refcount incremented when 'prev' is not NULL, it
needs be put when finish using it.
Because the parent is const, introduce a new variable to
store the returned fwnode, then put it before returning
from fwnode_graph_get_next_endpoint().
Fixes: b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20221123022542.2999510-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95e5fda3b5f9ed8239b145da3fa01e641cf5d53c ]
The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.
Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d80dbd708c18c683dd34f79b600a05307707ce8 ]
The dwc3 core support now links against the extcon subsystem,
so it cannot be built-in when extcon is a loadable module:
arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon':
core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle'
arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev'
arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node'
There was already a Kconfig dependency in the dual-role support,
but this is now needed for the entire dwc3 driver.
It is still possible to build dwc3 without extcon, but this
prevents it from being set to built-in when extcon is a loadable
module.
Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230118090147.2126563-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c5842085851f786eba24a39ecd02650ad892064 ]
Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.
This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.
Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e433adc60f7f847e734c56246b09291532f29b6d ]
Currently, we run into a number of WARN()s when attempting to unload the
amdgpu driver (e.g. using "modprobe -r amdgpu"). These all stem from
calling drm_encoder_cleanup() too early. So, to fix this we can stop
calling drm_encoder_cleanup() from amdgpu_dm_fini() and instead have it
be called from amdgpu_dm_encoder_destroy(). Also, we don't need to free
in amdgpu_dm_encoder_destroy() since mst_encoders[] isn't explicitly
allocated by the slab allocator.
Fixes: f74367e492ba ("drm/amdgpu/display: create fake mst encoders ahead of time (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc30c15f275484f9b9fe27c2fa0895f3022d9943 ]
According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.
Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7a7ee6f5a019ad72852c001abbce50d35e992f2 ]
Terminate vdesc when terminating an ongoing transfer.
This will ensure that the vdesc is present in the desc_terminated list
The descriptor will be freed later in desc_free_list().
This fixes the memory leaks which can happen when terminating an
ongoing transfer.
Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/20230118115801.15210-1-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
for_each_child_of_node()
[ Upstream commit 596b53ccc36a546ab28e8897315c5b4d1d5a0200 ]
Since for_each_child_of_node() will increase the refcount of node, we need
to call of_node_put() manually when breaking out of the iteration.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20221122021612.1908866-1-liushixin2@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93eea624526fc7d070cdae463408665824075f54 ]
Make sure that upon error after we have acquired the wakeref we do
release it again.
v2: add another missing "goto out_wf"(Andi).
Fixes: 027c38b4121e ("drm/i915/selftests: Grab the runtime pm in shrink_thp")
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117123234.26487-1-nirmoy.das@intel.com
(cherry picked from commit 14ec40a88210151296fff3e981c1a7196ad9bf55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3782c0d6edf658b71354a64d60aa7a296188fc90 ]
betopff_init() only checks the total sum of the report counts for each
report field to be at least 4, but hid_betopff_play() expects 4 report
fields.
A device advertising an output report with one field and 4 report counts
would pass the check but crash the kernel with a NULL pointer dereference
in hid_betopff_play().
Fixes: 52cd7785f3cd ("HID: betop: add drivers/hid/hid-betopff.c")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d71ebe8114b4bf622804b810f5e274069060a174 ]
Commit a7766ef18b33("virtio_net: disable cb aggressively") enables
virtqueue callback via the following statement:
do {
if (use_napi)
virtqueue_disable_cb(sq->vq);
free_old_xmit_skbs(sq, false);
} while (use_napi && kick &&
unlikely(!virtqueue_enable_cb_delayed(sq->vq)));
When NAPI is used and kick is false, the callback won't be enabled
here. And when the virtqueue is about to be full, the tx will be
disabled, but we still don't enable tx interrupt which will cause a TX
hang. This could be observed when using pktgen with burst enabled.
TO be consistent with the logic that tries to disable cb only for
NAPI, fixing this by trying to enable delayed callback only when NAPI
is enabled when the queue is about to be full.
Fixes: a7766ef18b33 ("virtio_net: disable cb aggressively")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b90f5a665acd46efbbfa677a3a3a18d01ad6487 ]
PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.
The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.
Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.
Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3dc1b3b4750851a94212dba249703dd0e50bb20 ]
The first time dma_chan_get() is called for a channel the channel
client_count is incorrectly incremented twice for public channels,
first in balance_ref_count(), and again prior to returning. This
results in an incorrect client count which will lead to the
channel resources not being freed when they should be. A simple
test of repeated module load and unload of async_tx on a Dell
Power Edge R7425 also shows this resulting in a kref underflow
warning.
[ 124.329662] async_tx: api initialized (async)
[ 129.000627] async_tx: api initialized (async)
[ 130.047839] ------------[ cut here ]------------
[ 130.052472] refcount_t: underflow; use-after-free.
[ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28
refcount_warn_saturate+0xba/0x110
[ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr
intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm
mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si
syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops
k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat
fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul
libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas
i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash
dm_log dm_mod [last unloaded: async_tx]
[ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not
tainted 5.14.0-185.el9.x86_64 #1
[ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS
1.18.0 01/17/2022
[ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110
[ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d
26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a
bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff
48 c7
[ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286
[ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000
[ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0
[ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff
[ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970
[ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000)
knlGS:0000000000000000
[ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0
[ 130.219729] Call Trace:
[ 130.222192] <TASK>
[ 130.224305] dma_chan_put+0x10d/0x110
[ 130.227988] dmaengine_put+0x7a/0xa0
[ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280
[ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0
[ 130.242652] do_syscall_64+0x5c/0x90
[ 130.246240] ? exc_page_fault+0x62/0x150
[ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 130.255243] RIP: 0033:0x7f6463a3f5ab
[ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48
83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89
01 48
[ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX:
00000000000000b0
[ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab
[ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8
[ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000
[ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8
[ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8
[ 130.320875] </TASK>
[ 130.323081] ---[ end trace eff7156d56b5cf25 ]---
cat /sys/class/dma/dma0chan*/in_use would get the wrong result.
2
2
2
Fixes: d2f4f99db3e9 ("dmaengine: Rework dma_chan_get")
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Jie Hai <haijie1@huawei.com>
Test-by: Jie Hai <haijie1@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Joel Savitz <jsavitz@redhat.com>
Link: https://lore.kernel.org/r/20221201030050.978595-1-koba.ko@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6437a549ae178a3f5a5c03e983f291ebcdc2bbc7 ]
On ARMv5 and earlier, a randconfig build can still run into
WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE
Depends on [n]: IOMMU_SUPPORT [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y]) && !GENERIC_ATOMIC64 [=y]
Selected by [y]:
- DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) && MMU [=y]
Rework the dependencies to always require a working cmpxchg64.
Fixes: db594ba3fcf9 ("drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117164456.1591901-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c1e1b949024989e20907b84e11a731a50778416 ]
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c83d1f4c5adae9583e7fca1e3e830d6b061522d ]
The cited commit removes eswitch mode none. So after devlink reload
in switchdev mode, eswitch mode is not changed. But actually eswitch
is disabled during devlink reload.
Fix it by setting eswitch mode to legacy when disabling eswitch
which is called by reload_down.
Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffa99b534732f90077f346c62094cab3d1ccddce ]
Currently decap action is set based on tunnel_id. That means it is
set unconditionally. But for decap, ct and sample actions, decap is
done before ct. No need to decap again in sample.
And the actions are set correctly when parsing. So set decap action
based on attr instead of tunnel_id.
Fixes: 2741f2230905 ("net/mlx5e: TC, Support sample offload action for tunneled traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
MODIFY_SCHEDULING_ELEMENT
[ Upstream commit 4ddf77f9bc76092d268bd3af447d60d9cc62b652 ]
According to HW spec parent_element_id field should be reserved (0x0) when calling
MODIFY_SCHEDULING_ELEMENT command.
This patch remove the wrong initialization of reserved field, parent_element_id, on
mlx5_qos_update_node.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f51471d1935ce1f504fce6c115ce3bfbc32032b0 ]
According to HW spec element_type, element_attributes and parent_element_id fields
should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command.
This patch remove initialization of these fields when calling the command.
Fixes: bd77bf1cb595 ("net/mlx5: Add SRIOV VF max rate configuration support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5aa56105930374928d567744595fd7ac525d0688 ]
The cited commit changed class of tc_ht internal mutex in order to avoid
false lock dependency with fs_core node and flow_table hash table
structures. However, hash table implementation internally also includes a
workqueue task with its own lockdep map which causes similar bogus lockdep
splat[0]. Fix it by also adding dedicated class for hash table workqueue
work structure of tc_ht.
[0]:
[ 1139.672465] ======================================================
[ 1139.673552] WARNING: possible circular locking dependency detected
[ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted
[ 1139.675734] ------------------------------------------------------
[ 1139.676801] modprobe/5998 is trying to acquire lock:
[ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.679662]
but task is already holding lock:
[ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.682223]
which lock already depends on the new lock.
[ 1139.683640]
the existing dependency chain (in reverse order) is:
[ 1139.684887]
-> #2 (&tc_ht_lock_key){+.+.}-{3:3}:
[ 1139.685975] __mutex_lock+0x12c/0x14b0
[ 1139.686659] rht_deferred_worker+0x35/0x1540
[ 1139.687405] process_one_work+0x7c2/0x1310
[ 1139.688134] worker_thread+0x59d/0xec0
[ 1139.688820] kthread+0x28f/0x330
[ 1139.689444] ret_from_fork+0x1f/0x30
[ 1139.690106]
-> #1 ((work_completion)(&ht->run_work)){+.+.}-{0:0}:
[ 1139.691250] __flush_work+0xe8/0x900
[ 1139.691915] __cancel_work_timer+0x2ca/0x3f0
[ 1139.692655] rhashtable_free_and_destroy+0x22/0x6f0
[ 1139.693472] del_sw_flow_table+0x22/0xb0 [mlx5_core]
[ 1139.694592] tree_put_node+0x24c/0x450 [mlx5_core]
[ 1139.695686] tree_remove_node+0x6e/0x100 [mlx5_core]
[ 1139.696803] mlx5_destroy_flow_table+0x187/0x690 [mlx5_core]
[ 1139.698017] mlx5e_tc_nic_cleanup+0x2f8/0x400 [mlx5_core]
[ 1139.699217] mlx5e_cleanup_nic_rx+0x2b/0x210 [mlx5_core]
[ 1139.700397] mlx5e_detach_netdev+0x19d/0x2b0 [mlx5_core]
[ 1139.701571] mlx5e_suspend+0xdb/0x140 [mlx5_core]
[ 1139.702665] mlx5e_remove+0x89/0x190 [mlx5_core]
[ 1139.703756] auxiliary_bus_remove+0x52/0x70
[ 1139.704492] device_release_driver_internal+0x3c1/0x600
[ 1139.705360] bus_remove_device+0x2a5/0x560
[ 1139.706080] device_del+0x492/0xb80
[ 1139.706724] mlx5_rescan_drivers_locked+0x194/0x6a0 [mlx5_core]
[ 1139.707961] mlx5_unregister_device+0x7a/0xa0 [mlx5_core]
[ 1139.709138] mlx5_uninit_one+0x5f/0x160 [mlx5_core]
[ 1139.710252] remove_one+0xd1/0x160 [mlx5_core]
[ 1139.711297] pci_device_remove+0x96/0x1c0
[ 1139.722721] device_release_driver_internal+0x3c1/0x600
[ 1139.723590] unbind_store+0x1b1/0x200
[ 1139.724259] kernfs_fop_write_iter+0x348/0x520
[ 1139.725019] vfs_write+0x7b2/0xbf0
[ 1139.725658] ksys_write+0xf3/0x1d0
[ 1139.726292] do_syscall_64+0x3d/0x90
[ 1139.726942] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.727769]
-> #0 (&node->lock){++++}-{3:3}:
[ 1139.728698] __lock_acquire+0x2cf5/0x62f0
[ 1139.729415] lock_acquire+0x1c1/0x540
[ 1139.730076] down_write+0x8e/0x1f0
[ 1139.730709] down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.731841] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core]
[ 1139.732982] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core]
[ 1139.734207] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core]
[ 1139.735491] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core]
[ 1139.736716] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core]
[ 1139.738007] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core]
[ 1139.739213] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core]
[ 1139.740377] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core]
[ 1139.741534] rhashtable_free_and_destroy+0x3be/0x6f0
[ 1139.742351] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core]
[ 1139.743512] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core]
[ 1139.744683] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
[ 1139.745860] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core]
[ 1139.747098] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
[ 1139.748372] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core]
[ 1139.749590] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core]
[ 1139.750813] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core]
[ 1139.752147] mlx5e_rep_remove+0x62/0x80 [mlx5_core]
[ 1139.753293] auxiliary_bus_remove+0x52/0x70
[ 1139.754028] device_release_driver_internal+0x3c1/0x600
[ 1139.754885] driver_detach+0xc1/0x180
[ 1139.755553] bus_remove_driver+0xef/0x2e0
[ 1139.756260] auxiliary_driver_unregister+0x16/0x50
[ 1139.757059] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core]
[ 1139.758207] mlx5e_cleanup+0x12/0x30 [mlx5_core]
[ 1139.759295] mlx5_cleanup+0xc/0x49 [mlx5_core]
[ 1139.760384] __x64_sys_delete_module+0x2b5/0x450
[ 1139.761166] do_syscall_64+0x3d/0x90
[ 1139.761827] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.762663]
other info that might help us debug this:
[ 1139.763925] Chain exists of:
&node->lock --> (work_completion)(&ht->run_work) --> &tc_ht_lock_key
[ 1139.765743] Possible unsafe locking scenario:
[ 1139.766688] CPU0 CPU1
[ 1139.767399] ---- ----
[ 1139.768111] lock(&tc_ht_lock_key);
[ 1139.768704] lock((work_completion)(&ht->run_work));
[ 1139.769869] lock(&tc_ht_lock_key);
[ 1139.770770] lock(&node->lock);
[ 1139.771326]
*** DEADLOCK ***
[ 1139.772345] 2 locks held by modprobe/5998:
[ 1139.772994] #0: ffff88813c1ff0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600
[ 1139.774399] #1: ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.775822]
stack backtrace:
[ 1139.776579] CPU: 3 PID: 5998 Comm: modprobe Not tainted 6.1.0_for_upstream_debug_2022_12_12_17_02 #1
[ 1139.777935] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1139.779529] Call Trace:
[ 1139.779992] <TASK>
[ 1139.780409] dump_stack_lvl+0x57/0x7d
[ 1139.781015] check_noncircular+0x278/0x300
[ 1139.781687] ? print_circular_bug+0x460/0x460
[ 1139.782381] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1139.783121] ? lock_release+0x487/0x7c0
[ 1139.783759] ? orc_find.part.0+0x1f1/0x330
[ 1139.784423] ? mark_lock.part.0+0xef/0x2fc0
[ 1139.785091] __lock_acquire+0x2cf5/0x62f0
[ 1139.785754] ? register_lock_class+0x18e0/0x18e0
[ 1139.786483] lock_acquire+0x1c1/0x540
[ 1139.787093] ? down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.788195] ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
[ 1139.788978] ? register_lock_class+0x18e0/0x18e0
[ 1139.789715] down_write+0x8e/0x1f0
[ 1139.790292] ? down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.791380] ? down_write_killable+0x220/0x220
[ 1139.792080] ? find_held_lock+0x2d/0x110
[ 1139.792713] down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.793795] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core]
[ 1139.794879] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core]
[ 1139.796032] ? __esw_offloads_unload_rep+0xd0/0xd0 [mlx5_core]
[ 1139.797227] ? xa_load+0x11a/0x200
[ 1139.797800] ? __xa_clear_mark+0xf0/0xf0
[ 1139.798438] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core]
[ 1139.799660] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core]
[ 1139.800821] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core]
[ 1139.802049] ? mlx5_eswitch_get_uplink_priv+0x25/0x80 [mlx5_core]
[ 1139.803260] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core]
[ 1139.804398] ? __cancel_work_timer+0x1c2/0x3f0
[ 1139.805099] ? mlx5e_tc_unoffload_from_slow_path+0x460/0x460 [mlx5_core]
[ 1139.806387] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core]
[ 1139.807481] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core]
[ 1139.808564] rhashtable_free_and_destroy+0x3be/0x6f0
[ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core]
[ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core]
[ 1139.810455] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core]
[ 1139.811552] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core]
[ 1139.812655] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
[ 1139.813768] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core]
[ 1139.814952] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
[ 1139.816166] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core]
[ 1139.817336] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core]
[ 1139.818507] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core]
[ 1139.819788] ? mlx5_eswitch_uplink_get_proto_dev+0x30/0x30 [mlx5_core]
[ 1139.821051] ? kernfs_find_ns+0x137/0x310
[ 1139.821705] mlx5e_rep_remove+0x62/0x80 [mlx5_core]
[ 1139.822778] auxiliary_bus_remove+0x52/0x70
[ 1139.823449] device_release_driver_internal+0x3c1/0x600
[ 1139.824240] driver_detach+0xc1/0x180
[ 1139.824842] bus_remove_driver+0xef/0x2e0
[ 1139.825504] auxiliary_driver_unregister+0x16/0x50
[ 1139.826245] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core]
[ 1139.827322] mlx5e_cleanup+0x12/0x30 [mlx5_core]
[ 1139.828345] mlx5_cleanup+0xc/0x49 [mlx5_core]
[ 1139.829382] __x64_sys_delete_module+0x2b5/0x450
[ 1139.830119] ? module_flags+0x300/0x300
[ 1139.830750] ? task_work_func_match+0x50/0x50
[ 1139.831440] ? task_work_cancel+0x20/0x20
[ 1139.832088] ? lockdep_hardirqs_on_prepare+0x273/0x3f0
[ 1139.832873] ? syscall_enter_from_user_mode+0x1d/0x50
[ 1139.833661] ? trace_hardirqs_on+0x2d/0x100
[ 1139.834328] do_syscall_64+0x3d/0x90
[ 1139.834922] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.835700] RIP: 0033:0x7f153e71288b
[ 1139.836302] Code: 73 01 c3 48 8b 0d 9d 75 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6d 75 0e 00 f7 d8 64 89 01 48
[ 1139.838866] RSP: 002b:00007ffe0a3ed938 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1139.840020] RAX: ffffffffffffffda RBX: 0000564c2cbf8220 RCX: 00007f153e71288b
[ 1139.841043] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000564c2cbf8288
[ 1139.842072] RBP: 0000564c2cbf8220 R08: 0000000000000000 R09: 0000000000000000
[ 1139.843094] R10: 00007f153e7a3ac0 R11: 0000000000000206 R12: 0000564c2cbf8288
[ 1139.844118] R13: 0000000000000000 R14: 0000564c2cbf7ae8 R15: 00007ffe0a3efcb8
Fixes: 9ba33339c043 ("net/mlx5e: Avoid false lock depenency warning on tc_ht")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ec9b2a30853ba843b70ea16f196e5fe3327be5f ]
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce405d561b020e5a46340eb5146805a625dcacee ]
As per the documentation, function usb_ep_free_request guarantees
the request will not be queued or no longer be re-queued (or
otherwise used). However, with the current implementation it
doesn't make sure that the request in ep0 isn't reused.
Fix this by dequeuing the ep0req on functionfs_unbind before
freeing the request to align with the definition.
Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20221215052906.8993-3-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a19da111057f69214b97c62fb0ac59023970850 ]
While performing fast composition switch, there is a possibility that the
process of ffs_ep0_write/ffs_ep0_read get into a race condition
due to ep0req being freed up from functionfs_unbind.
Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait
by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't
bounded so it can go ahead and mark the ep0req to NULL, and since there
is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free.
Fix this by making a serialized execution between the two functions using
a mutex_lock(ffs->mutex).
Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver")
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20221215052906.8993-2-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fac4b8633fd682ecc8e9cff61cb3e33374a1c7e5 ]
During ucsi_unregister() when destroying a connector's workqueue, there
may still be pending delayed work items that haven't been scheduled yet.
Because queue_delayed_work() uses a separate timer to schedule a work
item, the destroy_workqueue() call is not aware of any pending items.
Hence when a pending item's timer expires it would then try to queue on
a dangling workqueue pointer.
Fix this by keeping track of all work items in a list, so that prior to
destroying the workqueue any pending items can be flushed. Do this by
calling mod_delayed_work() as that will cause pending items to get
queued immediately, which then allows the ensuing destroy_workqueue() to
implicitly drain all currently queued items to completion and free
themselves.
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Jack Pham <quic_jackp@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d6033e350694a67885605674244d43c9559dc36 ]
We need to pass 'end - 1' to ida_alloc_max after switch from
ida_simple_get to ida_alloc_max.
Otherwise smatch warns.
drivers/block/rnbd/rnbd-clt.c:1460 init_dev() error: Calling ida_alloc_max() with a 'max' argument which is a power of 2. -1 missing?
Fixes: 24afc15dbe21 ("block/rnbd: Remove a useless mutex")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20221230010926.32243-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbf44580ce6b310272a73e3e794233fd064330bd ]
This partially reverts commit f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk
for some mice"), as it turns out to break reboot on some platforms for reason
yet to be understood.
Fixes: f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 431d1531466033909d2e8c754a7dc3704b70843f ]
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5
regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is
configured in GRF_IOFUNC regs according to TRM [1].
Update mux route data to reflect this and use proper detection pin for
UART1 IO mux M1.
This fixes HDMITX IO mux M1 selection and makes it possible to enable
HDMI CEC on my Radxa ROCK 3 Model A v1.31 board.
[1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF
Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230110084636.1141740-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f3bd64ad921f051254591fbed04fd30b306cde6 ]
In a number of cases the driver assigns a default value of -1 to
priv->plat->phy_addr. This may result in calling mdiobus_get_phy()
with addr parameter being -1. Therefore check for this scenario and
bail out before calling mdiobus_get_phy().
Fixes: 42e87024f727 ("net: stmmac: Fix case when PHY handle is not present")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7bf714f875531f227f2ef1fdcc8f4d44e7c7d9d ]
Add a check for empty report_list in bigben_probe().
The missing check causes a type confusion when issuing a list_entry()
on an empty report_list.
The problem is caused by the assumption that the device must
have valid report_list. While this will be true for all normal HID
devices, a suitably malicious device can violate the assumption.
Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b12fece4c64857e5fab4290bf01b2e0317a88456 ]
Add a check for empty report_list in hid_validate_values().
The missing check causes a type confusion when issuing a list_entry()
on an empty report_list.
The problem is caused by the assumption that the device must
have valid report_list. While this will be true for all normal HID
devices, a suitably malicious device can violate the assumption.
Fixes: 1b15d2e5b807 ("HID: core: fix validation of report id 0")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 867dbe784c5010a466f00a7d1467c1c5ea569c75 ]
The caller may pass any value as addr, what may result in an out-of-bounds
access to array mdio_map. One existing case is stmmac_init_phy() that
may pass -1 as addr. Therefore validate addr before using it.
Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecf7cf8efb59789e2b21d2f9ab926142579092b2 ]
Packet len computed as difference of length word extracted from
skb data and four may result in a negative value. In such case
processing of the buffer should be interrupted rather than
setting sr_skb->len to an unexpectedly large value (due to cast
from signed to unsigned integer) and passing sr_skb to
usbnet_skb_return.
Fixes: e9da0b56fe27 ("sr9700: sanity check for packet length")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c296c77efb66994d94d9f706446a115581226550 ]
Correct queue statistics reading. All queue statistics are stored as unsigned
long values. The retrieval for ethtool fetches these values as u64. However, on
some systems the size of the counters are 32 bit. That yields wrong queue
statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by
using the correct data type.
Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short
period of time:
Non-patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
| q0_tx_pkt_n: 3775276254951 # ???
| q0_tx_irq_n: 879
| q0_rx_pkt_n: 1194000908909 # ???
| q0_rx_irq_n: 278
Patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
| q0_tx_pkt_n: 2434
| q0_tx_irq_n: 1274
| q0_rx_pkt_n: 1604
| q0_rx_irq_n: 846
Fixes: 68e9c5dee1cf ("net: stmmac: add ethtool per-queue statistic framework")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31b62a98de42cf65d76e4dcfb571af067d27d83a ]
When reading pinconf-pins from debugfs it fails to get the configured pull
type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a
reverse of the pull-up value swap applied in rockchip_set_pull so that
pull-up is correctly reported in pinconf-pins.
Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b870e73a56c4cccbec33224233eaf295839f228c ]
Since resplen and respoffs are signed integers sufficiently
large values of unsigned int len and offset members of RNDIS
response will result in negative values of prior variables.
This may be utilized to bypass implemented security checks
to either extract memory contents by manipulating offset or
overflow the data buffer via memcpy by manipulating both
offset and len.
Additionally assure that sum of resplen and respoffs does not
overflow so buffer boundaries are kept.
Fixes: 80f8c5b434f9 ("rndis_wlan: copy only useful data from rndis_command respond")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e88a0feebb241cab0253698b2f7358b6ebec802 ]
Always configure GPIO pins which are used as interrupt source as INPUTs.
In case the default pin configuration is OUTPUT, or the prior stage does
configure the pins as OUTPUT, then Linux will not reconfigure the pin as
INPUT and no interrupts are received.
Always configure the interrupt source GPIO pin as input to fix the above case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5464277625c1aca5c002e0f470377cdd6816dcf ]
The driver currently performs register read-modify-write without locking
in its irqchip part, this could lead to a race condition when configuring
interrupt mode setting. Add the missing bgpio spinlock lock/unlock around
the register read-modify-write.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 925f3deb45df73173a33e1e81db77575f4ffde39 ]
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c463721a73bdb57a913e0d3124677a3758886fc ]
This lockdep splat says it better than I could:
================================
WARNING: inconsistent lock state
6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0
{IN-SOFTIRQ-W} state was registered at:
_raw_spin_lock+0x5c/0xc0
sch_direct_xmit+0x148/0x37c
__dev_queue_xmit+0x528/0x111c
ip6_finish_output2+0x5ec/0xb7c
ip6_finish_output+0x240/0x3f0
ip6_output+0x78/0x360
ndisc_send_skb+0x33c/0x85c
ndisc_send_rs+0x54/0x12c
addrconf_rs_timer+0x154/0x260
call_timer_fn+0xb8/0x3a0
__run_timers.part.0+0x214/0x26c
run_timer_softirq+0x3c/0x74
__do_softirq+0x14c/0x5d8
____do_softirq+0x10/0x20
call_on_irq_stack+0x2c/0x5c
do_softirq_own_stack+0x1c/0x30
__irq_exit_rcu+0x168/0x1a0
irq_exit_rcu+0x10/0x40
el1_interrupt+0x38/0x64
irq event stamp: 7825
hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130
hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8
softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8
softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(_xmit_ETHER#2);
<Interrupt>
lock(_xmit_ETHER#2);
*** DEADLOCK ***
3 locks held by kworker/1:3/179:
#0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34
Workqueue: events enetc_tx_onestep_tstamp
Call trace:
print_usage_bug.part.0+0x208/0x22c
mark_lock+0x7f0/0x8b0
__lock_acquire+0x7c4/0x1ce0
lock_acquire.part.0+0xe0/0x220
lock_acquire+0x68/0x84
_raw_spin_lock+0x5c/0xc0
netif_freeze_queues+0x5c/0xc0
netif_tx_lock+0x24/0x34
enetc_tx_onestep_tstamp+0x20/0x100
process_one_work+0x28c/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x11c
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 488e0bf7f34af3d42d1d5e56f7a5a7beaff188a3 ]
If uhdlc_priv_tsa != 1 then utdm is not initialized.
And if ret != NULL then goto undo_uhdlc_init, where
utdm is dereferenced. Same if dev == NULL.
Found by Astra Linux on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm")
Signed-off-by: Esina Ekaterina <eesina@astralinux.ru>
Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
rockchip_usb2phy_power_on()
[ Upstream commit 5daba914da0e48950e9407ea4d75fa57029c9adc ]
The clk_disable_unprepare() should be called in the error handling of
rockchip_usb2phy_power_on().
Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 83a7f8e4899fb4cd77c787a3373f3e82b49a080f ]
Commit 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
Remove that variable.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113154637.1704116-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 926446ae24c03311a480fb96eb78f0ce7ea6d091 ]
AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 579923d84b04abb6cd4cd1fd9974096a2dd1832b ]
There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.
Update the driver to use the TFCR based on the reported version of the
hardware.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17eee264ef386ef30a69dd70e36f29893b85c170 ]
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail
and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as
input, which may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
