summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-03-11Merge tag 'drm-intel-fixes-2022-03-10' of ↵Dave Airlie2-2/+15
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix PSR2 when selective fetch is enabled and cursor at (-1, -1) (Jouni Högander) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YinTFSFg++HvuFpZ@tursulin-mobl2
2022-03-11Merge tag 'drm-misc-fixes-2022-03-10' of ↵Dave Airlie1-4/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * drm/sun4i: Fix P010 and P210 format numbers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YipS65Iuu7RMMlAa@linux-uq9g
2022-03-11Merge tag 'net-5.17-rc8' of ↵Linus Torvalds36-166/+241
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, and ipsec. Current release - regressions: - Bluetooth: fix unbalanced unlock in set_device_flags() - Bluetooth: fix not processing all entries on cmd_sync_work, make connect with qualcomm and intel adapters reliable - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0" - xdp: xdp_mem_allocator can be NULL in trace_mem_connect() - eth: ice: fix race condition and deadlock during interface enslave Current release - new code bugs: - tipc: fix incorrect order of state message data sanity check Previous releases - regressions: - esp: fix possible buffer overflow in ESP transformation - dsa: unlock the rtnl_mutex when dsa_master_setup() fails - phy: meson-gxl: fix interrupt handling in forced mode - smsc95xx: ignore -ENODEV errors when device is unplugged Previous releases - always broken: - xfrm: fix tunnel mode fragmentation behavior - esp: fix inter address family tunneling on GSO - tipc: fix null-deref due to race when enabling bearer - sctp: fix kernel-infoleak for SCTP sockets - eth: macb: fix lost RX packet wakeup race in NAPI receive - eth: intel stop disabling VFs due to PF error responses - eth: bcmgenet: don't claim WOL when its not available" * tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) xdp: xdp_mem_allocator can be NULL in trace_mem_connect(). ice: Fix race condition during interface enslave net: phy: meson-gxl: improve link-up behavior net: bcmgenet: Don't claim WOL when its not available net: arc_emac: Fix use after free in arc_mdio_probe() sctp: fix kernel-infoleak for SCTP sockets net: phy: correct spelling error of media in documentation net: phy: DP83822: clear MISR2 register to disable interrupts gianfar: ethtool: Fix refcount leak in gfar_get_ts_info selftests: pmtu.sh: Kill nettest processes launched in subshell. selftests: pmtu.sh: Kill tcpdump processes launched by subshell. NFC: port100: fix use-after-free in port100_send_complete net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ax25: Fix NULL pointer dereference in ax25_kill_by_device net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr net: ethernet: lpc_eth: Handle error for clk_enable ...
2022-03-11ice: Fix race condition during interface enslaveIvan Vecera2-2/+21
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev() is called from ice_service_task() context, aux device is created and associated device->lock is taken. 2. Command 'ip link ... set master...' calls ice's notifier under RTNL lock and that notifier calls ice_unplug_aux_dev(). That function tries to take aux device->lock but this is already taken by ice_plug_aux_dev() in step 1 3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already taken in step 2 4. Dead-lock The patch fixes this issue by following changes: - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev() call in ice_service_task() - The bit is checked in ice_clear_rdma_cap() and only if it is not set then ice_unplug_aux_dev() is called. If it is set (in other words plugging of aux device was requested and ice_plug_aux_dev() is potentially running) then the function only clears the bit - Once ice_plug_aux_dev() call (in ice_service_task) is finished the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked whether it was already cleared by ice_clear_rdma_cap(). If so then aux device is unplugged. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Co-developed-by: Petr Oros <poros@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11net: phy: meson-gxl: improve link-up behaviorHeiner Kallweit1-1/+7
Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11net: bcmgenet: Don't claim WOL when its not availableJeremy Linton1-0/+7
Some of the bcmgenet platforms don't correctly support WOL, yet ethtool returns: "Supports Wake-on: gsf" which is false. Ideally if there isn't a wol_irq, or there is something else that keeps the device from being able to wakeup it should display: "Supports Wake-on: d" This patch checks whether the device can wakup, before using the hard-coded supported flags. This corrects the ethtool reporting, as well as the WOL configuration because ethtool verifies that the mode is supported before attempting it. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11net: arc_emac: Fix use after free in arc_mdio_probe()Jianglei Nie1-2/+3
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. Fixes: 95b5fc03c189 ("net: arc_emac: Make use of the helper function dev_err_probe()") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11Merge tag 'mlx5-fixes-2022-03-09' of ↵Jakub Kicinski5-18/+17
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-03-09 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ==================== Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'staging-5.17-rc8' of ↵Linus Torvalds7-28/+42
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are three small fixes for staging drivers for 5.17-rc8 or -final, which ever comes next. They resolve some reported problems: - rtl8723bs wifi driver deadlock fix for reported problem that is a revert of a previous patch. Also a documentation fix is added so that the same problem hopefully can not come back again. - gdm724x driver use-after-free fix for a reported problem. All of these have been in linux-next for a while with no reported problems" * tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: Improve the comment explaining the locking rules staging: rtl8723bs: Fix access-point mode deadlock staging: gdm724x: fix use after free in gdm_lte_rx()
2022-03-10net: phy: DP83822: clear MISR2 register to disable interruptsClément Léger1-1/+1
MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10gianfar: ethtool: Fix refcount leak in gfar_get_ts_infoMiaoqian Lin1-0/+1
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'soc-fixes-5.17-3' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here is a third set of fixes for the soc tree, well within the expected set of changes. Maintainer list changes: - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses - Broadcom iProc has a new git tree Regressions: - Robert Foss sends a revert for a Mediatek DPI bridge patch that caused an inadvertent break in the DT binding - mstar timers need to be included in Kconfig Devicetree fixes for: - Aspeed ast2600 spi pinmux - Tegra eDP panels on Nyan FHD - Tegra display IOMMU - Qualcomm sm8350 UFS clocks - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm sm8450, and Broadcom BCM2711" * tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 MAINTAINERS: Update Jisheng's email address Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint" dt-bindings: drm/bridge: anx7625: Revert DPI support ARM: dts: aspeed: Fix AST2600 quad spi group MAINTAINERS: update Krzysztof Kozlowski's email MAINTAINERS: Update git tree for Broadcom iProc SoCs ARM: tegra: Move Nyan FHD panels to AUX bus arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias ARM: mstar: Select HAVE_ARM_ARCH_TIMER soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint ARM: boot: dts: bcm2711: Fix HVS register range arm64: dts: qcom: c630: disable crypto due to serror arm64: dts: qcom: sm8450: fix apps_smmu interrupts arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb arm64: dts: qcom: sm8350: Correct UFS symbol clocks arm64: tegra: Disable ISO SMMU for Tegra194 Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
2022-03-10vhost: allow batching hint without sizeJason Wang1-1/+3
Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") tries to reject the IOTLB message whose size is zero. But the size is not necessarily meaningful, one example is the batching hint, so the commit breaks that. Fixing this be reject zero size message only if the message is used to update/invalidate the IOTLB. Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reported-by: Eli Cohen <elic@nvidia.com> Cc: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220310075211.4801-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eli Cohen <elic@nvidia.com>
2022-03-10Merge tag 'spi-fix-v5.17-rc7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One fix for type conversion issues when working out maximum scatter/gather segment sizes. It caused problems for some systems where the limits overflow due to the type conversion" * tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix invalid sgs value
2022-03-10Merge tag 'gpio-fixes-for-v5.17' of ↵Linus Torvalds5-19/+37
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a probe failure for Tegra241 GPIO controller in gpio-tegra186 - revert changes that caused a regression in the sysfs user-space interface - correct the debounce time conversion in GPIO ACPI - statify a struct in gpio-sim and fix a typo - update registers in correct order (hardware quirk) in gpio-ts4900 * tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: fix a typo gpio: ts4900: Do not set DAT and OE together gpio: sim: Declare gpio_sim_hog_config_item_ops static gpiolib: acpi: Convert ACPI value of debounce to microseconds gpio: Revert regression in sysfs-gpio (gpiolib.c) gpio: tegra186: Add IRQ per bank for Tegra241
2022-03-10gpio: sim: fix a typoBartosz Golaszewski1-1/+1
Just noticed this when applying Andy's patch. s/childred/children/ Fixes: cb8c474e79be ("gpio: sim: new testing module") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-03-10gpio: ts4900: Do not set DAT and OE togetherMark Featherston1-5/+19
This works around an issue with the hardware where both OE and DAT are exposed in the same register. If both are updated simultaneously, the harware makes no guarantees that OE or DAT will actually change in any given order and may result in a glitch of a few ns on a GPIO pin when changing direction and value in a single write. Setting direction to input now only affects OE bit. Setting direction to output updates DAT first, then OE. Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support") Signed-off-by: Mark Featherston <mark@embeddedTS.com> Signed-off-by: Kris Bahnsen <kris@embeddedTS.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-03-10Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds6-9/+42
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "One more small batch of clk driver fixes: - A fix for the Qualcomm GDSC power domain delays that avoids black screens at boot on some more recent SoCs that use a different delay than the hard-coded delays in the driver. - A build fix LAN966X clk driver that let it be built on architectures that didn't have IOMEM" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: lan966x: Fix linking error clk: qcom: dispcc: Update the transition delay for MDSS GDSC clk: qcom: gdsc: Add support to update GDSC transition delay
2022-03-10Merge tag 'xsa396-5.17-tag' of ↵Linus Torvalds8-124/+150
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: - blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. - blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. - netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend" * tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netfront: react properly to failing gnttab_end_foreign_access_ref() xen/gnttab: fix gnttab_end_foreign_access() without page specified xen/pvcalls: use alloc/free_pages_exact() xen/9p: use alloc/free_pages_exact() xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done() xen: remove gnttab_query_foreign_access() xen/gntalloc: don't use gnttab_query_foreign_access() xen/scsifront: don't use gnttab_query_foreign_access() for mapped status xen/netfront: don't use gnttab_query_foreign_access() for mapped status xen/blkfront: don't use gnttab_query_foreign_access() for mapped status xen/grant-table: add gnttab_try_end_foreign_access() xen/xenbus: don't let xenbus_grant_ring() remove grants in error case
2022-03-10NFC: port100: fix use-after-free in port100_send_completePavel Skripkin1-0/+2
Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670 Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge branch 'for-linus' of ↵Linus Torvalds5-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - sysfs attributes leak fix for Google Vivaldi driver (Dmitry Torokhov) - fix for potential out-of-bounds read in Thrustmaster driver (Pavel Skripkin) - error handling reference leak in Elo driver (Jiri Kosina) - a few new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: nintendo: check the return value of alloc_workqueue() HID: vivaldi: fix sysfs attributes leak HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts HID: elo: Revert USB reference counting HID: Add support for open wheel and no attachment to T300 HID: logitech-dj: add new lightspeed receiver id
2022-03-09net/mlx5e: SHAMPO, reduce TIR indicationBen Ben-Ishay2-5/+1
SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the first place to enforce suitability between connected TIR and RQ, this enforcement does not exist in current the Firmware implementation and was redundant in the first place. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09net/mlx5e: Lag, Only handle events from highest priority multipath entryRoi Dayan1-3/+8
There could be multiple multipath entries but changing the port affinity for each one doesn't make much sense and there should be a default one. So only track the entry with lowest priority value. The commit doesn't affect existing users with a single entry. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLEDima Chumak1-3/+0
Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09net/mlx5: Fix a race on command flush flowMoshe Shemesh1-7/+8
Fix a refcount use after free warning due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process released its refcount but didn't release the index yet. Fix it by adding the needed spin lock. It fixes the following warning trace: refcount_t: addition on 0; use-after-free. WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0 ... RIP: 0010:refcount_warn_saturate+0x80/0xe0 ... Call Trace: <TASK> mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core] mlx5_cmd_flush+0x3a/0xf0 [mlx5_core] enter_error_state+0x44/0x80 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core] process_one_work+0x1be/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x141/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09net: marvell: prestera: Add missing of_node_put() in ↵Miaoqian Lin1-0/+1
prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: ethernet: lpc_eth: Handle error for clk_enableJiasheng Jiang1-1/+4
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net:mcf8390: Use platform_get_irq() to get the interruptMinghao Chi (CGEL ZTE)1-5/+5
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: ethernet: ti: cpts: Handle error for clk_enableJiasheng Jiang1-1/+3
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09Merge branch '40GbE' of ↵David S. Miller11-101/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-03-08 This series contains updates to iavf, i40e, and ice drivers. Michal ensures netdev features are properly updated to reflect VLAN changes received from PF and adds an additional flag for MSI-X reinitialization as further differentiation of reinitialization operations is needed for iavf. Jake stops disabling of VFs due to failed virtchannel responses for i40e and ice driver. Dave moves MTU event notification to the service task to prevent issues with RTNL lock for ice. Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of GFP_KERNEL for ice. Jedrzej fixes the value for link speed comparison which was preventing the requested value from being set for ice. --- Note: This will conflict when merging with net-next. Resolution: diff --cc drivers/net/ethernet/intel/ice/ice.h index dc42ff92dbad,3121f9b04f59..000000000000 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags ICE_FLAG_LEGACY_RX, ICE_FLAG_VF_TRUE_PROMISC_ENA, ICE_FLAG_MDD_AUTO_RESET_VF, + ICE_FLAG_VF_VLAN_PRUNING, ICE_FLAG_LINK_LENIENT_MODE_ENA, ICE_FLAG_PLUG_AUX_DEV, + ICE_FLAG_MTU_CHANGED, + ICE_FLAG_GNSS, /* GNSS successfully initialized */ ICE_PF_FLAGS_NBITS /* must be last */ }; ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09ethernet: Fix error handling in xemaclite_of_probeMiaoqian Lin1-1/+3
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do. Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09ice: Fix curr_link_speed advertised speedJedrzej Jagielski1-1/+1
Change curr_link_speed advertised speed, due to link_info.link_speed is not equal phy.curr_user_speed_req. Without this patch it is impossible to set advertised speed to same as link_speed. Testing Hints: Try to set advertised speed to 25G only with 25G default link (use ethtool -s 0x80000000) Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09ice: Don't use GFP_KERNEL in atomic contextChristophe JAILLET1-1/+1
ice_misc_intr() is an irq handler. It should not sleep. Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09ice: Fix error with handling of bonding MTUDave Ertman2-15/+15
When a bonded interface is destroyed, .ndo_change_mtu can be called during the tear-down process while the RTNL lock is held. This is a problem since the auxiliary driver linked to the LAN driver needs to be notified of the MTU change, and this requires grabbing a device_lock on the auxiliary_device's dev. Currently this is being attempted in the same execution context as the call to .ndo_change_mtu which is causing a dead-lock. Move the notification of the changed MTU to a separate execution context (watchdog service task) and eliminate the "before" notification. Fixes: 348048e724a0e ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09ice: stop disabling VFs due to PF error responsesJacob Keller2-21/+0
The ice_vc_send_msg_to_vf function has logic to detect "failure" responses being sent to a VF. If a VF is sent more than ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled. Almost identical logic also existed in the i40e driver. This logic was added to the ice driver in commit 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") which itself copied from the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). Neither commit provides a proper explanation or justification of the check. In fact, later commits to i40e changed the logic to allow bypassing the check in some specific instances. The "logic" for this seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lack of resources, etc. Additionally, this causes the PF to log an info message for every failed VF response which may confuse users, and can spam the kernel log. This behavior is not documented as part of any requirement for our products and other operating system drivers such as the FreeBSD implementation of our drivers do not include this type of check. In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1 ("i40e: Lower some message levels") explains that these messages typically don't actually indicate a real issue. It is quite likely that a user who hits this in practice will be very confused as the VF will be disabled without an obvious way to recover. We already have robust malicious driver detection logic using actual hardware detection mechanisms that detect and prevent invalid device usage. Remove the logic since its not a documented requirement and the behavior is not intuitive. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09i40e: stop disabling VFs due to PF error responsesJacob Keller3-59/+9
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09iavf: Fix adopting new combined settingMichal Maloszewski2-4/+10
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED which should indicate that interrupts need to be completely reinitialized during reset leads to RTNL deadlocks using ethtool -C while a reset is in progress. To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED used to trigger MSI-X reinit. New combined setting is fixed adopt after VF reset. This has been implemented by call reinit interrupt scheme during VF reset. Without this fix new combined setting has never been adopted. Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08iavf: Fix handling of vlan strip virtual channel messagesMichal Maloszewski1-0/+40
Modify netdev->features for vlan stripping based on virtual channel messages received from the PF. Change is needed to synchronize vlan strip status between PF sysfs and iavf ethtool. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08spi: Fix invalid sgs valueBiju Das1-2/+2
max_seg_size is unsigned int and it can have a value up to 2^32 (for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX) When this value is used in min_t() as an integer type, it becomes -1 and the value of sgs becomes 0. Fix this issue by replacing the 'int' data type with 'unsigned int' in min_t(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-08net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()Russell King (Oracle)1-1/+1
Discussing one of the tests in mt753x_phylink_validate() with Landen Chao confirms that the "||" should be "&&". Fix this. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-08drm/sun4i: mixer: Fix P010 and P210 format numbersJernej Skrabec1-4/+4
It turns out that DE3 manual has inverted YUV and YVU format numbers for P010 and P210. Invert them. This was tested by playing video decoded to P010 and additionally confirmed by looking at BSP driver source. Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
2022-03-08gpio: sim: Declare gpio_sim_hog_config_item_ops staticAndy Shevchenko1-1/+1
Compiler is not happy: warning: symbol 'gpio_sim_hog_config_item_ops' was not declared. Should it be static? Fixes: cb8c474e79be ("gpio: sim: new testing module") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-03-08MAINTAINERS: update Krzysztof Kozlowski's emailKrzysztof Kozlowski1-1/+1
Use Krzysztof Kozlowski's @kernel.org account in maintainer entries. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220307172805.156760-1-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-08Input: zinitix - do not report shadow fingersLinus Walleij1-9/+35
I observed the following problem with the BT404 touch pad running the Phosh UI: When e.g. typing on the virtual keyboard pressing "g" would produce "ggg". After some analysis it turns out the firmware reports that three fingers hit that coordinate at the same time, finger 0, 2 and 4 (of the five available 0,1,2,3,4). DOWN Zinitix-TS 3-0020: finger 0 down (246, 395) Zinitix-TS 3-0020: finger 1 up (0, 0) Zinitix-TS 3-0020: finger 2 down (246, 395) Zinitix-TS 3-0020: finger 3 up (0, 0) Zinitix-TS 3-0020: finger 4 down (246, 395) UP Zinitix-TS 3-0020: finger 0 up (246, 395) Zinitix-TS 3-0020: finger 2 up (246, 395) Zinitix-TS 3-0020: finger 4 up (246, 395) This is one touch and release: i.e. this is all reported on touch (down) and release. There is a field in the struct touch_event called finger_cnt which is actually a bitmask of the fingers active in the event. Rename this field finger_mask as this matches the use contents better, then use for_each_set_bit() to iterate over just the fingers that are actally active. Factor out a finger reporting function zinitix_report_fingers() to handle all fingers. Also be more careful in reporting finger down/up: we were reporting every event with input_mt_report_slot_state(..., true); but this should only be reported on finger down or move, not on finger up, so also add code to check p->sub_status to see what is happening and report correctly. After this my Zinitix BT404 touchscreen report fingers flawlessly. The vendor drive I have notably does not use the "finger_cnt" and contains obviously incorrect code like this: if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM) touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM; As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is a bitmask this seems quite confused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-07Merge tag 'mtd/fixes-for-5.17-rc8' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fix from Miquel Raynal: "As part of a previous changeset introducing support for the K3 architecture, the OMAP_GPMC (a non visible symbol) got selected by the selection of MTD_NAND_OMAP2 instead of doing so from the architecture directly (like for the other users of these two drivers). Indeed, from a hardware perspective, the OMAP NAND controller needs the GPMC to work. This led to a robot error which got addressed in fix merge into -rc4. Unfortunately, the approach at this time still used "select" and lead to further build error reports (sparc64:allmodconfig). This time we switch to 'depends on' in order to prevent random misconfigurations. The different dependencies will however need a future cleanup" * tag 'mtd/fixes-for-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: omap2: Actually prevent invalid configuration and build error
2022-03-07Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds12-39/+109
Pull virtio fixes from Michael Tsirkin: "Some last minute fixes that took a while to get ready. Not regressions, but they look safe and seem to be worth to have" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: handle fallout from folio work tools/virtio: fix virtio_test execution vhost: remove avail_event arg from vhost_update_avail_event() virtio: drop default for virtio-mem vdpa: fix use-after-free on vp_vdpa_remove virtio-blk: Remove BUG_ON() in virtio_queue_rq() virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero vhost: fix hung thread due to erroneous iotlb entries vduse: Fix returning wrong type in vduse_domain_alloc_iova() vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command vdpa/mlx5: should verify CTRL_VQ feature exists for MQ vdpa: factor out vdpa_set_features_unlocked for vdpa internal use virtio_console: break out of buf poll on remove virtio: document virtio_reset_device virtio: acknowledge all features before access virtio: unexport virtio_finalize_features
2022-03-07mtd: rawnand: omap2: Actually prevent invalid configuration and build errorRoger Quadros1-2/+1
The root of the problem is that we are selecting symbols that have dependencies. This can cause random configurations that can fail. The cleanest solution is to avoid using select. This driver uses interfaces from the OMAP_GPMC driver so we have to depend on it instead. Fixes: 4cd335dae3cf ("mtd: rawnand: omap2: Prevent invalid configuration and build error") Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org
2022-03-07drm/i915/psr: Set "SF Partial Frame Enable" also on full updateJouni Högander2-2/+15
Currently we are observing occasional screen flickering when PSR2 selective fetch is enabled. More specifically glitch seems to happen on full frame update when cursor moves to coords x = -1 or y = -1. According to Bspec SF Single full frame should not be set if SF Partial Frame Enable is not set. This happened to be true for ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's actually "SF Partial Frame Enable" (Bit 31). Setting "SF Partial Frame Enable" bit also on full update seems to fix screen flickering. Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE only if not on ADL_P. Bit 31 has different meaning in ADL_P. Bspec: 49274 v2: Fix Mihai Harpau email address v3: Modify commit message and remove unnecessary comment Tested-by: Lyude Paul <lyude@redhat.com> Fixes: 7f6002e58025 ("drm/i915/display: Enable PSR2 selective fetch by default") Reported-by: Lyude Paul <lyude@redhat.com> Cc: Mihai Harpau <mharpau@gmail.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com (cherry picked from commit 8d5516d18b323cf7274d1cf5fe76f4a691f879c6) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-03-07gpiolib: acpi: Convert ACPI value of debounce to microsecondsAndy Shevchenko2-2/+14
It appears that GPIO ACPI library uses ACPI debounce values directly. However, the GPIO library APIs expect the debounce timeout to be in microseconds. Convert ACPI value of debounce to microseconds. While at it, document this detail where it is appropriate. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664 Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-03-07gpio: Revert regression in sysfs-gpio (gpiolib.c)Marcelo Roberto Jimenez1-10/+0
Some GPIO lines have stopped working after the patch commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges") And this has supposedly been fixed in the following patches commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL") commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined") But an erratic behavior where some GPIO lines work while others do not work has been introduced. This patch reverts those changes so that the sysfs-gpio interface works properly again. Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 10:13:34 +0300