| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add register dump for the ISP image stabilizer module to debugfs. This
helps debugging issues related to digital zoom.
Link: https://lore.kernel.org/r/20231201140433.2126011-3-paul.elder@ideasonboard.com
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Consolidate the wraparound fields in the memory interface interrupt
status registers, so that it can be more succinctly expressed by taking
the stream ID (main or self) as a parameter.
Link: https://lore.kernel.org/r/20231201140433.2126011-2-paul.elder@ideasonboard.com
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.
This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.
It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-4-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Store the IRQ lines used by the driver for easy access. These are needed
in future patches which fix IRQ race issues.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-3-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The IRQ handler rkisp1_isr() calls sub-handlers, all of which returns an
irqreturn_t value, but rkisp1_isr() ignores those values and always
returns IRQ_HANDLED.
Fix this by collecting the return values, and returning IRQ_HANDLED or
IRQ_NONE as appropriate.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-2-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In all known platforms the ISP has dedicated IRQ lines, but for some
reason the driver uses IRQF_SHARED.
Supporting IRQF_SHARED properly requires handling interrupts even when
our device is disabled, and the driver does not handle this. To avoid
adding such code, and to be sure the driver won't accidentally be used
in a platform with shared interrupts, let's drop the IRQF_SHARED flag.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-1-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add missing call to v4l2_subdev_cleanup() to fix memory leak.
Link: https://lore.kernel.org/r/20231122-rkisp-fixes-v2-2-78bfb63cdcf8@ideasonboard.com
Fixes: 2cce0a369dbd ("media: rkisp1: isp: Use V4L2 subdev active state")
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add missing calls to media_device_cleanup() to fix memory leak.
Link: https://lore.kernel.org/r/20231122-rkisp-fixes-v2-1-78bfb63cdcf8@ideasonboard.com
Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The extended address registers are missing in the debug output register
list. These are only available on 36-Bit DMA platforms. Due to the
prolonged name, the output width has to be adjusted as well.
Link: https://lore.kernel.org/r/20231207110918.1338524-1-alexander.stein@ew.tq-group.com
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver always enables the clocks at probe() and disables them only
at remove(). It is not clear why the driver does this, as it supports
runtime PM, and enables and disables the clocks in the runtime resume
and suspend callbacks. Also, in the case runtime PM is not available,
the driver calls the resume and suspend callbacks manually from probe()
and remove().
Drop the unnecessary clock enable, thus enabling the clocks only when
actually needed.
Link: https://lore.kernel.org/r/20231122-imx-csis-v2-2-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver always calls mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in remove(). This causes multiple WARNs from the
kernel, as the clocks get disabled too many times.
Fix the remove() to call mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in a way that reverses what is done in probe().
Link: https://lore.kernel.org/r/20231122-imx-csis-v2-1-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Include all the headers that the driver needs explicitly instead of
relying on indirect inclusion. While at it, drop a few unneeded headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device does not implement the power line frequency control
correctly. It is a UVC 1.5 device, but implements the control as a UVC
1.1 device.
Add the corresponding control mapping override.
Bus 003 Device 002: ID 2b7e:b752 SunplusIT Inc HD Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x2b7e
idProduct 0xb752
bcdDevice 0.04
iManufacturer 1 SunplusIT Inc
iProduct 2 HD Camera
iSerial 3 01.00.00
bNumConfigurations 1
Cc: Yunke Cao <yunkec@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When selecting an alternate setting, the driver loops over all available
alternate settings to find the one with the lowest bandwidth high enough
for the selected format and resolution. While all alternate settings
should have different packet sizes, some buggy devices report multiple
alternate settings with the same size. The driver happens to pick the
last one in this case.
In theory this should work fine, but in real life we have device bugs.
The Ali Corp. Newmine Camera (0402:8841) exposes four alternate
settings with the same packet size. The first three seem to work fine,
while selecting the last one results in lots of transmission errors.
Switch to using the first best alternate setting when multiple are
present. This should be safe (last famous words), as sniffing USB
traffic with the faulty device shows that Windows 10 picks the first
alternate setting, and devices are typically tested on Windows.
Closes: https://lore.kernel.org/linux-media/Nh6D0WI--3-9@tutanota.com/
Reported-by: Karel Janda <karel1@tutanota.com>
Suggested-by: Karel Janda <karel1@tutanota.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device does not implement the control properly.
Fixes v4l2-compliance error:
info: checking control 'Power Line Frequency' (0x00980918)
fail: v4l2-test-controls.cpp(552): could not set valid menu item 3
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The vb2 read support requests 1 buffer, leaving it to the driver
to increase this number to something that works.
Unfortunately, drivers do not deal with this reliably, and in fact
this caused problems for the bttv driver and reading from /dev/vbiX,
causing every other VBI frame to be all 0.
Instead, request as the number of buffers whatever is the maximum of
2 and q->min_buffers_needed+1.
In order to start streaming you need at least q->min_buffers_needed
queued buffers, so add 1 buffer for processing. And if that field
is 0, then choose 2 (again, one buffer is being filled while the
other one is being processed).
This certainly makes more sense than requesting just 1 buffer, and
the VBI bttv support is now working again.
It turns out that the old videobuf1 behavior of bttv was to allocate
8 (video) and 4 (vbi) buffers when used with read(). After the vb2
conversion that changed to 2 for both. With this patch it is 3, which
is really all you need.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The old (now removed) videobuf framework had an optional vbi hack where
the sequence number of the frame counter was copied in the last 4 bytes
of the buffer. This hack was active only for the read() interface
(so not for streaming I/O), and it was enabled by bttv. This allowed
applications that used read() for the VBI data to match it with the
corresponding video frame.
When bttv was converted to vb2 this hack was forgotten, but some old
applications rely on this.
So add this back, but this time in the bttv driver rather than in the
vb2 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The start_streaming callback returned 0 or 1 instead of a
proper error code. Fix that.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For the purpose of setting old non-pad based sub-device try format as a
basis for VIDIOC_TRY_FMT implementation, there is no need to set the
format in the sub-device state. Drop the assignment to the state, which
would result in a NULL pointer dereference.
Fixes: fd17e3a9a788 ("media: i2c: Use accessors for pad config 'try_*' fields")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For the purpose of setting old non-pad based sub-device try format as a
basis for VIDIOC_TRY_FMT implementation, there is no need to set the
format in the sub-device state. Drop the assignment to the state, which
would result in a NULL pointer dereference.
Fixes: fd17e3a9a788 ("media: i2c: Use accessors for pad config 'try_*' fields")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For the purpose of setting old non-pad based sub-device try format as a
basis for VIDIOC_TRY_FMT implementation, there is no need to set the
format in the sub-device state. Drop the assignment to the state, which
would result in a NULL pointer dereference.
Fixes: fd17e3a9a788 ("media: i2c: Use accessors for pad config 'try_*' fields")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For the purpose of setting old non-pad based sub-device try format as a
basis for VIDIOC_TRY_FMT implementation, there is no need to set the
format in the sub-device state. Drop the assignment to the state, which
would result in a NULL pointer dereference.
Fixes: fd17e3a9a788 ("media: i2c: Use accessors for pad config 'try_*' fields")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For the purpose of setting old non-pad based sub-device try format as a
basis for VIDIOC_TRY_FMT implementation, there is no need to set the
format in the sub-device state. Drop the assignment to the state, which
would result in a NULL pointer dereference.
Fixes: fd17e3a9a788 ("media: i2c: Use accessors for pad config 'try_*' fields")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For the purpose of setting old non-pad based sub-device try format as a
basis for VIDIOC_TRY_FMT implementation, there is no need to set the
format in the sub-device state. Drop the assignment to the state, which
would result in a NULL pointer dereference.
Fixes: fd17e3a9a788 ("media: i2c: Use accessors for pad config 'try_*' fields")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Select V4L2_CCI_I2C Kconfig option which the CCS driver now depends on.
Fixes: 529322112a3b ("media: ccs: Use V4L2 CCI for accessing sensor registers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312060941.CYiHppAp-lkp@intel.com/
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support for the multi-planar variants of NV12. The RGA is now able
to exchange DMABUFs with other devices that only support multi-planar
NV12, for example the Hantro JPEG encoder.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Multi-planar formats may have multiple planes that must be handled and
correctly mapped into a continuous buffer for the RGA by using the DMA
descriptors.
The plane offsets in the continuous mapping may now start at page
boundaries and the previous calculation based on the frame sizes is only
valid for planar buffers in a single memory. Therefore, the offsets must
be detected and set while creating the mapping.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Switch to the multi-planar API, which allows to handle buffers with
separate planes.
The RGA driver doesn't expose multi-planar formats, yet. The existing
contiguous planar formats can be used with the multi-planar API as well,
but the multi-planar API is required for multi-planar formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use the provided V4L2_TYPE_IS_{OUTPUT,CAPTURE} macros to check if the
buffer or queue is OUTPUT or CAPTURE. The macros work also work for the
_MPLANE buffer and queue types and make it easier to switch to the
multi-planar API.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The local variable allows to simplify the accessed to the format and
makes it easier to change the type of the format.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use the pixelformat instead of the v4l2_format to find the rga_fmt. This
avoids knowing the structure and type of v4l2_format in rga_fmt_find and
simplifies the function.
Also cleanup the users of the function. In try_fmt always return the
found pixel format to make sure that the pixel format is always set.
Thus, we can be sure that we will find the rga_fmt in s_fmt and can drop
the check if a given format has been found.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The try_fmt should limit the width and height to the know limits of the
RGA. Use the clamp() helper instead of open coding the clamping.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The RGA DMA descriptor list contains only 32-bit addresses. Set the
dma_mask to only allocate memory that is addressable by the descriptors.
This prevents errors when preparing vb2 buffers that were allocated by
the RGA.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Calculate the plane offsets and store them with the video buffer while
creating the buffer mapping.
This allows the driver to more freely handle the memory of the DMA
mapping as the offsets and the mapping can be kept in sync.
The driver still has to update the offsets to respect the configured
cropping and rotation, but this calculation is now separated from the
calculation of the plane offsets.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Split the register setup for the source and destination video buffers
into separate functions.
This is a cleanup to make the code more readable by separating the
offset calculation for the different buffers and prepares the driver for
using pre-calculated offsets of planes.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The RGA driver allocates two buffers for the DMA descriptors of the
input and output buffers. Whenever a new job is processed, the
descriptor list is updated for the current buffers.
By updating the descriptor list during buf_prepare, it is possible to
correctly fail DMABUF imports if the buffers that shall be imported are
not within the 32 bit address range that can be addressed by the RGA.
Managing the DMA descriptor list with the buffer also makes it easier to
track the buffer mapping and the plane offsets into this mapping.
The cost is that the driver now requires DMA coherent memory per buffer
for the descriptor list. However, the size scales with the size of the
video buffers and is not allocated if the RGA is not used.
While at it, use dma_alloc_coherent to allocate the descriptors and get
rid of the virt_to_phys calls to get the physical addresses.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The IOMMU of the RGA is programmed with a list of DMA descriptors that
contain an 32 bit address per 4k page in the video buffers. The address
in the descriptor points to the start address of the page.
Introduce 'struct rga_dma_desc' to make the handling of the DMA
descriptors explicit instead of hiding them behind standard types.
While at it, use provided helpers for iterating the sg_table instead of
manually calculating the DMA addresses.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Declare power-domain names "top", "ife0" and "ife1" eponymously for the
power-domains TITAN_TOP_GDSC, IFE_0_GDSC and IFE_1_GDSC respectively.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Some platforms such as SC7280 have 3 CSIDs and 2 CSID-lites but current
code has hardcoded 2 as the maximum number of CSIDs. Remove the hardcoded
maximum number of VFEs to handle all possible combinations of CSIDs and
CSID-lites.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Some platforms such as SC7280 have three VFEs and two VFE-lites. Current
code has hard-coded two as the maximum number of VFEs. Remove the
hard-coded maximum number of VFEs to handle all possible combinations of
VFEs and VFE-lites.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311200405.h6G4L9oe-lkp@intel.com
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Right now we use fixed indexes to assign power-domains, with a
requirement for the TOP GDSC to come last in the list.
Adding support for named power-domains means the declaration in the dtsi
can come in any order.
After this change we continue to support the old indexing - if a SoC
resource declaration or the in-use dtb doesn't declare power-domain names
we fall back to the default legacy indexing.
From this point on though new SoC additions should contain named
power-domains, eventually we will drop support for legacy indexing.
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Moving the location of the hooks to VFE power domains has several
advantages.
1. Separation of concerns and functional decomposition.
vfe.c should be responsible for and know best how manage
power-domains for a VFE, excising from camss.c follows this
principle.
2. Embedding a pointer to genpd in struct camss_vfe{} meas that we can
dispense with a bunch of kmalloc array inside of camss.c.
3. Splitting up titan top gdsc from vfe/ife gdsc provides a base for
breaking up magic indexes in dtsi.
Suggested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For the various versions of VFE we have a boiler-plate
pm_domain_on/pm_domain_off callback pair of the general form.
- Error check.
Not always done but applicable to all.
- device_link_add (DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME |
DL_FLAG_RPM_ACTIVE);
- Error check returning -EINVAL on error.
- Return 0
Reduce the pattern down to a common callback. VFE 4.1 is a special case
which to me also indicates that it is worthwhile maintaining an indirection
for the vfe_pm_domain_{on|off} for now.
Otherwise lets chuck out a bunch of needlessly replicated code.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Right now we use the top-level camss structure to provide pointers via
VFE id index back to genpd linkages.
In effect this hard-codes VFE indexes to power-domain indexes in the
dtsi and mandates a very particular ordering of power domains in the
dtsi, which bears no relationship to a real hardware dependency.
As a first step to rationalising the VFE power-domain code and breaking
the magic indexing in dtsi use per-VFE pointers to genpd linkages.
The top-level index in msm_vfe_subdev_init is still used to attain the
initial so no functional or logical change arises from this change.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
At the moment we have some complex code for determining if a VFE requires a
power-domain attachment. Particularly discordant in this scheme is the
subtle reliance on VFE and VFE Lite declaration ordering in our resources.
VFE id is used to determine if a VFE is lite or not and consequently if a
VFE requires power-domain attachment. VFE Lite though is not a correct
delineation between power-domain and non power-domain state since early
SoCs have neither VFE Lite nor power-domains attached to VFEs.
Introduce has_pd to the VFE resource structure to allow the CAMSS code to
understand if it needs to try to attach a power-domain for a given VFE.
As a side-effect from this we no longer need to care about VFE Lite or
non-Lite or the id number associated with either and which order the
VFE/VFE Lite was declared in.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.
On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.
Fixes: 64fbf4445526 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The StarFive Camera Subsystem is only present on the StarFive JH7110
SoC. Hence add a dependency on ARCH_STARFIVE, to prevent asking the
user about this driver when configuring a kernel without StarFive SoC
support.
Fixes: bba185d141b1 ("media: staging: media: starfive: camss: Add core driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The Chips&Media Wave 5 Series multi-standard codec IP is currently only
supported on Texas Instruments K3 architecture. Hence add a dependency on
ARCH_K3, to prevent asking the user about this driver when configuring a
kernel without Texas Instruments K3 Multicore SoC support.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: small update in commit log, and reformatted the Fixes tag]
|
