summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-04-19usb: storage: Convert US_DEBUGP to usb_stor_dbgJoe Perches20-834/+753
Use a more current logging style with dev_printk where possible. o Convert uses of US_DEBUGP to usb_stor_dbg o Add "struct us_data *" to usb_stor_dbg uses o usb_stor_dbg now uses struct device */dev_vprint_emit o Removed embedded function names o Coalesce formats o Remove trailing whitespace o Remove useless OOM messages o Remove useless function entry/exit logging o Convert some US_DEBUGP uses to dev_info and dev_dbg Object size is slightly reduced when debugging is enabled, slightly increased with no debugging because some initialization and removal messages are now always emitted. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: kill custom closing_waitJohan Hovold1-54/+15
Kill custom closing_wait implementation and let the tty-layer handle it instead. Note that the port drain-delay is set to three characters to keep the 20ms delay after wait_until_sent at low baudrates (1200 baud) during close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: remove redundant drain from break_ctlJohan Hovold1-2/+0
Remove redundant drain, which has already been handled by the tty-layer, from break_ctl. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_bufferJohan Hovold1-0/+8
Query hardware-buffer status in chars_in_buffer should the write fifo be empty. This is needed to make the tty layer wait for hardware buffers to drain on close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: remove lsr from port dataJohan Hovold1-7/+7
The line status register is only polled so let's not keep a possibly outdated value in the port data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: move write-fifo flushing to closeJohan Hovold1-9/+8
Move write-fifo flushing from ti_drain to close where it belongs. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: io_ti: remove redundant wait_until_sentJohan Hovold1-2/+0
Remove redundant wait_until_sent, which has already been handled by the tty-layer, from break_ctl. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: io_ti: fix TIOCGSERIALJohan Hovold1-1/+1
Fix regression introduced by commit f40d78155 ("USB: io_ti: kill custom closing_wait implementation") which made TIOCGSERIAL return the wrong value for closing_wait. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: usbtmc: remove unnecessary memory allocationMing Lei1-22/+4
Inside usbtmc_ioctl_clear_out_halt()/usbtmc_ioctl_clear_in_halt(), usb_clear_halt() needn't any buffer to pass in, so remove the unnecessary memory allocation. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19usbatm: fix potential NULL pointer dereferenceWei Yongjun1-3/+3
The dereference to 'instance' in the debug code should be moved below the NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19usb: storage: Fix link errorJoe Perches1-0/+2
Fix allmodconfig link error introduced by commit 75b9130e8a ("usb: storage: Add usb_stor_dbg, reduce object size") Export the symbol usb_stor_dbg. Add export.h Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: move private-data allocation to port_probeJohan Hovold1-11/+19
Allocate port-private data in port-probe rather than in attach. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: remove unused private dataJohan Hovold1-5/+1
Use port device for debug messages in interrupt-urb callback and remove unused private data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: use port interrupt-in urbJohan Hovold1-90/+12
Use the port interrupt-in urb rather managing a private one. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: mct_u232: clean up read implementationJohan Hovold1-26/+11
The device uses the second interrupt-in endpoint of the interface for reading. Stop abusing the port read urb and store a pointer to the second interrupt-in urb as port-private data instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: use port interrupt-out urbJohan Hovold1-67/+8
Use the port interrupt-out urb rather than abusing the port write_urb pointer and allocating a new urb at every open (but the first...). Note that the write_urb abuse would have led to a double free should there ever be interfaces with a bulk-out endpoint. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: remove unused endpoint addressJohan Hovold1-8/+0
Remove unused interrupt-in endpoint address from private data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: fix broken debug codeJohan Hovold1-18/+2
Replace broken and commented-out debug code with usb_serial_debug_data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: switch to generic read implementationJohan Hovold1-40/+3
Switch to the more efficient generic read implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: refactor read-urb processingJohan Hovold1-7/+18
Refactor read-urb processing, and add sanity checks on header and data lengths. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: clean up protocol definesJohan Hovold1-7/+7
Remove redundant data-offset define, which was really just the header length. Add payload-size define and use the bulk-out size define for the actual bulk-out size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: clean up protocol descriptionJohan Hovold1-7/+6
Clean up and fix typos in protocol comment. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: omninet: use kzalloc for private dataJohan Hovold1-1/+1
Make sure the port private data, which contains the write sequence number, is cleared at allocation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: ehci-omap: Improve PHY error handlingRoger Quadros1-2/+2
As the USB PHY layer never returns NULL we don't need to check for that condition. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: ehci-omap: Don't select any PHY driverRoger Quadros1-1/+3
Don't select NOP_USB_XCEIV. Instead, board config must select USB_PHY and the appropriate PHY driver. Also add a hint in Kconfig so that users enabling this driver manually enable the right PHY drivers as well. Gets rid of the below warnings when USB_EHCI_HCD_OMAP is enabled. warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl epHans de Goede1-0/+2
When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17usb: storage: Add usb_stor_dbg, reduce object sizeJoe Perches3-12/+34
Reduce the size of the objects by consolidating the duplicated USB_STORAGE into a single function. Add function usb_stor_dbg to emit debugging messages. Always validate the format and arguments. Reduce the number of uses of CONFIG_USB_STORAGE_DEBUG. Reduces size of objects ~7KB when CONFIG_USB_STORAGE_DEBUG is set. $ size drivers/usb/storage/built-in.o* text data bss dec hex filename 140133 55296 70312 265741 40e0d drivers/usb/storage/built-in.o.new 147494 55248 70296 273038 42a8e drivers/usb/storage/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17usb: remove redundant tdi_resetShengzhou Liu1-3/+0
We remove the redundant tdi_reset in ehci_setup since there is already it in ehci_reset. It was observed that the duplicated tdi_reset was causing the PHY_CLK_VALID bit unstable. Reported-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> # 3.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12usb: exynos: do not include plat/usb-phy.hArnd Bergmann2-2/+0
The definitions have moved to include/linux/usb/samsung-usb-phy.h, and plat/usb-phy.h is unavailable from drivers in a multiplatform configuration. Also fix up the plat/usb-phy.h header file to use the definitions from the new header instead of providing a separate copy. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11usb: ohci-exynos: skip phy setup for Exynos5440 based platformsThomas Abraham1-2/+9
Exynos5440 does not require any explict USB phy configuration. So skip the USB phy configuration for Exynos5440 based platforms. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11USB: serial: wishbone-serial: fix up minor sparse warningGreg Kroah-Hartman1-1/+1
This fixes a sparse warning where we should be using NULL instead of 0 Cc: Wesley W. Terpstra <w.terpstra@gsi.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11usb-serial: add support for USB Wishbone-serial adaptersWesley W. Terpstra3-0/+113
Wishbone is an open hardware SoC bus commonly used in FPGA designs. Bus access can be serialized using the Etherbone protocol <http://www.ohwr.org/projects/etherbone-core>. This driver is intended to be used with devices which attach their internal Wishbone bus to a USB serial interface using the Etherbone protocol. A userspace library is required to speak the protocol made available by this driver as ttyUSBx. Signed-off-by: Wesley W. Terpstra <w.terpstra@gsi.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10USB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD blockFlorian Fainelli1-2/+4
This patch encloses all symbols depending on USB_XHCI_HCD within an if USB_XHCI_HCD / endif block. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10USB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD blockFlorian Fainelli1-25/+26
This patch removes the various depends on USB_OHCI_HCD from the OHCI HCD drivers and enclose them within an if USB_OHCI_HCD / endif block. The Octeon OHCI HCD driver has been moved around to remain in this block. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10USB: enclose EHCI HCD drivers within an if USB_EHCI_HCD blockFlorian Fainelli1-39/+42
Thist patch removes the depends on USB_EHCI_HCD that the various USB EHCI HCD drivers use and encloses every driver within an if USB_EHCI_HCD / endif block. The EHCI HCD platform and Octeon drivers have been moved around to remain enclosed within this block. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10USB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbolFlorian Fainelli1-9/+2
Just like the OHCI counter part we just can remove the architecture specific symbols which prevent these configuration symbols from being selected by platforms/architectures requiring it. The original implementation did not scale at all since it required each and every single architecture to be added for these configuration symbols to be selected. Now it is up to the EHCI driver and/or platform to select these configuration symbols accordingly. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10USB: regroup all depends on USB within an if USB blockFlorian Fainelli14-74/+36
This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10USB: option: add a D-Link DWM-156 variantBjørn Mork1-0/+6
Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10usb: ehci-s5p: fix: Fix null pointer dereferencingVivek Gautam1-1/+1
7edb3da: (USB: EHCI: make ehci-s5p a separate driver) raised an issue with ehci-s5p's driver data. Now that 's5p_ehci_hcd' doesn't maintain pointer to 'usb_hcd' and s5p_ehci is nothing but a pointer to hcd->priv; add hcd to the driver data rather than s5p_ehci. This fixes issues with null pointer dereferencing in s5p_ehci_shutdown(), s5p_ehci_suspend(), s5p_ehci_resume(). Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> CC: Manjunath Goudar <manjunath.goudar@linaro.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Jingoo Han <jg1.han@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09Merge tag 'for-usb-next-2012-04-08' of ↵Greg Kroah-Hartman3-15/+19
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xHCI misc cleanup patches for 3.10 Hi Greg, Here's three cleanup patches for 3.10. Nothing big here, just some debugging output changes, a macro rename, and a math macro change that should have no behavioral effects. Tested on the Intel Panther Point xHCI host, with USB storage and mouse, with xHCI debugging turned on. I don't have the TI host that causes the debugging output changes to trigger. Sarah Sharp
2013-04-08USB: EHCI: make ehci-msm a separate driverManjunath Goudar4-54/+44
Separate the Qualcomm QSD/MSM on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Qualcomm QSD/MSM can be booted with a multi-platform kernel, which is not expected before 3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the msm bus glue. In V5 (arnd): - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls In V3: - Detailed commit message added here describing why this patch is required. - Arranged #include's in alphabetical order. - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver structure initialization instead of "msm-ehci", which was the reason why it broke in EHCI USB testing In V2: Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08USB: EHCI: make ehci-atmel a separate driverManjunath Goudar4-52/+51
Separate the Atmel host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Atmel can be booted with a multi-platform kernel. This is currently planned for Linux-3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the Atmel bus glue. In V4 (arnd): - reordered #include statements. - removed call to ehci_shutdown and the corresponding export In V3: - Detailed commit message added here about why this patch is required. - Replaced hcd_name string "ehci-atmel" to "atmel-ehci". - Inserted blank line in the Makefile to separate the EHCI drivers from the following non-EHCI drivers. - Exported ehci_shutdown symbol as it is needed by the Atmel driver. - Eliminated ehci_atmel_setup routine because hcd registers can be directly set in the ehci_atmel_drv_probe function. In V2: Resolved below compiler error. drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove': drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown' Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08USB: EHCI: make ehci-s5p a separate driverManjunath Goudar4-91/+85
Separate the Samsung S5P/EXYNOS host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before S5P/EXYNOS can be booted with a multi-platform kernel. We currently expect those to get merged for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the s5p bus glue. In V4 (arnd) - revert some of the pointless changes. - fix allocation of s5p specific data structure. In V3: - Detailed commit message added here, why this patch is required. - MODULE_LICENSE is GPL v2. - Added .extra_priv_size to eliminate the separate allocation of the s5p_ehci_hcd structure and removed .reset function pointer initialization. - Arranged #include's in alphabetical order. - After using extra_priv_size initialization, struct usb_hcd *hcd is redundant and can be removed from the probe function. - Eliminated s5p_ehci_phy_enable,contents of statements moved into the s5p_ehci_probe - Eliminated s5p_ehci_phy_disable, contents of statements moved into the s5p_ehci_remove. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08USB: EHCI: make ehci-spear a separate driverManjunath Goudar4-69/+61
Separate the SPEAr host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before SPEAr can be booted with a multi-platform kernel, but they are queued in the arm-soc tree for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the SPEAr bus glue. In V4 (arnd): - renamed all 'struct spear_ehci' pointers from 'ehci' to the less ambiguous 'sehci'. - folded trivial spear_start_ehci/spear_stop_ehci functions into callers. - brought back initialization of ehci->caps. In V3: - Detailed commit message added here about why this patch is required. - Eliminated ehci_spear_setup routine because hcd registers can be directly set in the spear_ehci_hcd_drv_probe function. - spear_overrides struct initialized. - Converted to using .extra_priv_size for allocating spear_ehci, and updated all users of that structure. - to_spear_ehci() macro modified for spear_ehci. In V2: - Replaced spear as SPEAr everywhere, leaving functions/variables/config options. Signed-off-by: Deepak Saxena <dsaxena@linaro.org> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08USB: EHCI: make ehci-orion a separate driverManjunath Goudar4-53/+53
Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold2-0/+2
This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08usb, gadget: use appropriate warning accessorsDavid Rientjes1-2/+2
Use the appropriate WARN() and WARN_ON() accessors to avoid a build error when CONFIG_BUG=n: drivers/usb/gadget/configfs.c: In function 'config_usb_cfg_unlink': drivers/usb/gadget/configfs.c:442:2: error: implicit declaration of function '__WARN_printf' drivers/usb/gadget/configfs.c: In function 'configfs_do_nothing': drivers/usb/gadget/configfs.c:733:2: error: implicit declaration of function '__WARN' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08xhci - clarify compliance mode debug messagesTony Camuso1-5/+9
There are no functional changes in this patch. However, because the compliance mode timer can be deleted in more than one function, it seemed expedient to include the function name in the debug strings. Also limited the use of capitals to the first word in the compliance mode debug messages, except after a function name where all words start with lower case, in keeping with the style prevalent elsewhere in xhci.c. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-04-08Merge 3.9-rc6 into usb-nextGreg Kroah-Hartman102-940/+1221
We want the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-06Merge tag 'dm-3.9-fixes-2' of ↵Linus Torvalds1-13/+38
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes from Alasdair Kergon: "A pair of patches to fix the writethrough mode of the device-mapper cache target when the device being cached is not itself wrapped with device-mapper." * tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm cache: reduce bio front_pad size in writeback mode dm cache: fix writes to cache device in writethrough mode
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-08 09:50:05 +0300