| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The file named 'controls' in the DSP's debugfs root contains a
formatted table describing the controls defined within the loaded DSP
firmware, it is of the form
name: len region:offset addr fwname algid ctltype flags en dirty
Where flags is represented as a character for each flag if set, or '-',
enabled is whether the control is enabled or disabled and dirty is
whether the control value is set in the cache but not the hardware.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230328131018.6820-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When a DSP can self-boot from ROM it is not necessary to download
firmware during the powering up sequence.
A DSP that required firmware download would fail in a previous
configuration step if firmware was not available.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are devices containing Halo Core DSPs that self-boot, cs_dsp is
used to manage the running firmware but the host does not have direct
control over starting and stopping the DSP and so cs_dsp should consider
the DSP to be always running.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The QMC depends on (SOC_FSL && COMPILE_TEST). SOC_FSL does not exist.
Fix the dependency using the correct one: FSL_SOC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230314082157.137176-1-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linux 6.3-rc2
|
|
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Dump of the faulty ACPI TPM2 table:
[000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table]
[004h 0004 4] Table Length : 0000004C
[008h 0008 1] Revision : 04
[009h 0009 1] Checksum : 2B
[00Ah 0010 6] Oem ID : "INSYDE"
[010h 0016 8] Oem Table ID : "TGL-ULT"
[018h 0024 4] Oem Revision : 00000002
[01Ch 0028 4] Asl Compiler ID : "ACPI"
[020h 0032 4] Asl Compiler Revision : 00040000
[024h 0036 2] Platform Class : 0000
[026h 0038 2] Reserved : 0000
[028h 0040 8] Control Address : 0000000000000000
[030h 0048 4] Start Method : 06 [Memory Mapped I/O]
[034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
[040h 0064 4] Minimum Log Length : 00010000
[044h 0068 8] Log Address : 000000004053D000
Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
|
|
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes: 91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a recently introduced deadlock in the int340x thermal control
driver (Srinivas Pandruvada)"
* tag 'thermal-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor_thermal: Fix deadlock
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes.
msm and amdgpu are the vast majority of these, otherwise some
straggler misc from last week for nouveau and cirrus and a mailmap
update for a drm developer.
mailmap:
- add an entry
nouveau:
- fix system shutdown regression
- build warning fix
cirrus:
- NULL ptr deref fix
msm:
- fix invalid ptr free in syncobj cleanup
- sync GMU removal in teardown
- a5xx preemption fixes
- fix runpm imbalance
- DPU hw fixes
- stack corruption fix
- clear DSPP reservation
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling"
* tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
drm/amdgpu: Fix the warning info when removing amdgpu device
drm/amdgpu: fix return value check in kfd
drm/amd: Fix initialization mistake for NBIO 7.3.0
drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
mailmap: add mailmap entries for Faith.
drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed
drm/amd/display: Update clock table to include highest clock setting
drm/amd/pm: Enable ecc_info table support for smu v13_0_10
drm/amdgpu: Support umc node harvest config on umc v8_10
drm/connector: print max_requested_bpc in state debugfs
drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
drm/msm/dpu: clear DSPP reservations in rm release
drm/msm/disp/dpu: fix sc7280_pp base offset
drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage
drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.3-2023-03-09:
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310031314.1296929-1-alexander.deucher@amd.com
|
|
Added the video capability query support for VCN version 4_0_4
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Actually, the drm_dev_enter in psp_cmd_submit_buf does not
protect anything. If DRM device is unplugged, it will always
check the condition in WARN_ON. So drop drm_dev_enter and
drm_dev_exit in psp_cmd_submit_buf.
When removing amdgpu, the calling order is as follows:
amdgpu_pci_remove
drm_dev_unplug
amdgpu_driver_unload_kms
amdgpu_device_fini_hw
amdgpu_device_ip_fini_early
psp_hw_fini
psp_ras_terminate
psp_ta_unloadye
psp_cmd_submit_buf
[ 4507.740388] Call Trace:
[ 4507.740389] <TASK>
[ 4507.740391] psp_ta_unload+0x44/0x70 [amdgpu]
[ 4507.740485] psp_ras_terminate+0x4d/0x70 [amdgpu]
[ 4507.740575] psp_hw_fini+0x28/0xa0 [amdgpu]
[ 4507.740662] amdgpu_device_fini_hw+0x328/0x442 [amdgpu]
[ 4507.740791] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 4507.740875] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 4507.740962] ? _raw_spin_unlock_irqrestore+0x27/0x43
[ 4507.740965] ? __pm_runtime_resume+0x60/0x90
[ 4507.740968] pci_device_remove+0x39/0xb0
[ 4507.740971] device_remove+0x46/0x70
[ 4507.740972] device_release_driver_internal+0xd1/0x160
[ 4507.740974] driver_detach+0x4a/0x90
[ 4507.740975] bus_remove_driver+0x6c/0xf0
[ 4507.740976] driver_unregister+0x31/0x50
[ 4507.740977] pci_unregister_driver+0x40/0x90
[ 4507.740978] amdgpu_exit+0x15/0x120 [amdgpu]
v2: fix commit message style issue
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Acked-by: Christian Koenig <chriatian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.
Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.
v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.
[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The i2cdev_{at,de}tach_adapter() callbacks are used for two purposes:
1. As notifier callbacks, when (un)registering I2C adapters created or
destroyed after i2c_dev_init(),
2. As bus iterator callbacks, for registering already existing
adapters from i2c_dev_init(), and for cleanup.
Unfortunately both use cases expect different return values: the former
expects NOTIFY_* return codes, while the latter expects zero or error
codes, and aborts in case of error.
Hence in case 2, as soon as i2cdev_{at,de}tach_adapter() returns
(non-zero) NOTIFY_OK, the bus iterator aborts. This causes (a) only the
first already existing adapter to be registered, leading to missing
/dev/i2c-* entries, and (b) a failure to unregister all but the first
I2C adapter during cleanup.
Fix this by introducing separate callbacks for the bus iterator,
wrapping the notifier functions, and always returning succes.
Any errors inside these callback functions are unlikely to happen, and
are fatal anyway.
Fixes: cddf70d0bce71c2a ("i2c: dev: fix notifier return values")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Now that .probe() was changed not to get the id parameter, drivers can
be converted back to that with the eventual goal to drop .probe_new().
Implement that for the i2c drivers that are part of the i2c core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Now that .probe() was changed not to get the id parameter, drivers can
be converted back to that with the eventual goal to drop .probe_new().
Implement that for the i2c mux drivers.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back
type") introduced a new probe callback to convert i2c init routines to
not take an i2c_device_id parameter. Now that all in-tree drivers are
converted to the temporary .probe_new() callback, .probe() can be
modified to match the desired prototype.
Now that .probe() and .probe_new() have the same semantic, they can be
defined as members of an anonymous union to save some memory and
simplify the core code a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so
it can be trivially converted.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/lkml/20221121102838.16448-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so
it can be trivially converted.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/lkml/20221121102705.16092-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Link: https://lore.kernel.org/lkml/20221118224540.619276-596-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/lkml/20221118224540.619276-497-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/lkml/20221118224540.619276-483-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc2
- Fix for possible invalid ptr free in submit ioctl syncobj cleanup path.
- Synchronize GMU removal in driver teardown path
- a5xx preemption fixes
- Fix runpm imbalance at unbind
- DPU hw catalog fixes:
- set DPU_MDP_PERIPH_0_REMOVED for sc8280xp as this is another chipset
where the PERIPH_0 block of registers is not there
- fix the DPU features supported in QCM2290 by comparing it with the
downstream device tree
- fix the length of registers in the sc7180_ctl from 0xe4 to 0x1dc
- fix the max mixer line width for sm6115 and qcm2290 chipsets in the
DPU catalog
- fix the scaler version on sm8550, sc8280xp, sm8450, sm8250, sm8350
and sm6115. This was incorrectly populated on the SW version of the
scaler library and not the scaler HW version
- Drop dim layer support for msm8998 as its not indicated to be
supported in the downstream DTSI
- fix the DPU_CLK_CTRL bits for msm 8998 sspp blocks
- Use DPU_CLK_CTRL_DMA* prefix instead of DPU_CLK_CTRL_CURSOR*
for all chipsets for the DMA sspp blocks
- fix the ping-pong block base address for sc7280 in the DPU HW catalog
- Fix stack corruption issue in the dpu_hw_ctl_setup_blendstage() function
as it was causing a negative left shift by protecting against an invalid
index
- Clear the DSPP reservations in dpu_rm_release(). This was missed out and
as as result the DSPP was not released from the resource manager global
state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvH+VH_Wx3mFMG51CMnoiU06CM-+-WMhM73M42Qx7Bp4A@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- core: avoid skb end_offset change in __skb_unclone_keeptruesize()
- sched:
- act_connmark: handle errno on tcf_idr_check_alloc
- flower: fix fl_change() error recovery path
- ieee802154: prevent user from crashing the host
Current release - new code bugs:
- eth: bnxt_en: fix the double free during device removal
- tools: ynl:
- fix enum-as-flags in the generic CLI
- fully inherit attrs in subsets
- re-license uniformly under GPL-2.0 or BSD-3-clause
Previous releases - regressions:
- core: use indirect calls helpers for sk_exit_memory_pressure()
- tls:
- fix return value for async crypto
- avoid hanging tasks on the tx_lock
- eth: ice: copy last block omitted in ice_get_module_eeprom()
Previous releases - always broken:
- core: avoid double iput when sock_alloc_file fails
- af_unix: fix struct pid leaks in OOB support
- tls:
- fix possible race condition
- fix device-offloaded sendpage straddling records
- bpf:
- sockmap: fix an infinite loop error
- test_run: fix &xdp_frame misplacement for LIVE_FRAMES
- fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
- netfilter: tproxy: fix deadlock due to missing BH disable
- phylib: get rid of unnecessary locking
- eth: bgmac: fix *initial* chip reset to support BCM5358
- eth: nfp: fix csum for ipsec offload
- eth: mtk_eth_soc: fix RX data corruption issue
Misc:
- usb: qmi_wwan: add telit 0x1080 composition"
* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
tools: ynl: fix enum-as-flags in the generic CLI
tools: ynl: move the enum classes to shared code
net: avoid double iput when sock_alloc_file fails
af_unix: fix struct pid leaks in OOB support
eth: fealnx: bring back this old driver
net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
net: microchip: sparx5: fix deletion of existing DSCP mappings
octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
net/smc: fix fallback failed while sendmsg with fastopen
ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
mailmap: update entries for Stephen Hemminger
mailmap: add entry for Maxim Mikityanskiy
nfc: change order inside nfc_se_io error path
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
net: usb: qmi_wwan: add Telit 0x1080 composition
net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
netfilter: conntrack: adopt safer max chain length
net: tls: fix device-offloaded sendpage straddling records
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-07 (ice)
This series contains updates to ice driver only.
Dave removes masking from pfcena field as it was incorrectly preventing
valid traffic classes from being enabled.
Michal resolves various smatch issues such as not propagating error
codes and returning 0 explicitly.
Arnd Bergmann resolves gcc-9 warning for integer overflow.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
====================
Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that the same hardware that the r8188eu driver supported is
supported by the real wireless driver rtl8xxxu, the r8188eu driver can
be deleted.
Also the rtl8xxxu driver supports way more devices, and is a fraction of
the overall size, making this a much better overall solution.
Thanks to the r8188eu developers and maintainers and reviewers over the
years, your work allowed Linux users to use their hardware before the
real driver was implemented properly.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Larry Finger <LarryFinger@lwfinger.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230308131934.380395-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit d5e2d038dbece821f1af57acbeded3aa9a1832c1.
We have a report of this chip being used on a
SURECOM EP-320X-S 100/10M Ethernet PCI Adapter
which could still have been purchased in some parts
of the world 3 years ago.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151
Fixes: d5e2d038dbec ("eth: fealnx: delete the driver for Myson MTD-800")
Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as
internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5
receives corrupted frames, unless port 6 (attached to GMAC0) has been
brought up by the driver. This is true regardless of whether port 5 is
used as a user port or as a CPU port (carrying DSA tags).
Offline debugging (blind for me) which began in the linked thread showed
experimentally that the configuration done by the driver for port 6
contains a step which is needed by port 5 as well - the write to
CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from
the comment "Set core clock into 500Mhz"). Prints put by Arınç show that
the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the
MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi
BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both
values of the register, while on the MT7621 SoC it cannot.
The call path that triggers the register write is:
mt753x_phylink_mac_config() for port 6
-> mt753x_pad_setup()
-> mt7530_pad_clk_setup()
so this fully explains the behavior noticed by Arınç, that bringing port
6 up is necessary.
The simplest fix for the problem is to extract the register writes which
are needed for both port 5 and 6 into a common mt7530_pll_setup()
function, which is called at mt7530_setup() time, immediately after
switch reset. We can argue that this mirrors the code layout introduced
in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once
after the reset"), in that the PLL setup has the exact same positioning,
and further work to consolidate the separate setup() functions is not
hindered.
Testing confirms that:
- the slight reordering of writes to MT7530_P6ECR and to
CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not
appear to cause problems for the operation of port 6 on MT7621 and on
MT7623 (where port 5 also always worked)
- packets sent through port 5 are not corrupted anymore, regardless of
whether port 6 is enabled by phylink or not (or even present in the
device tree)
My algorithm for determining the Fixes: tag is as follows. Testing shows
that some logic from mt7530_pad_clk_setup() is needed even for port 5.
Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK
API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so
port 5 included. That commit replaced it with a temporary "Port 5 is not
supported!" comment, and the following commit 38f790a80560 ("net: dsa:
mt7530: Add support for port 5") replaced that comment with a
configuration procedure in mt7530_setup_port5() which was insufficient
for port 5 to work. I'm laying the blame on the patch that claimed
support for port 5, although one would have also needed the change from
commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII
mode") for the write to be performed completely independently from port
6's configuration.
Thanks go to Arınç for describing the problem, for debugging and for
testing.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A small set of assorted bug and build/warning fixes"
* tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: mellanox: mlx-platform: Initialize shift variable to 0
platform/x86: int3472: Add GPIOs to Surface Go 3 Board data
platform/x86: ISST: Fix kernel documentation warnings
platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
platform: mellanox: select REGMAP instead of depending on it
platform/x86/intel/tpmi: Fix double free reported by Smatch
platform/x86: ISST: Increase range of valid mail box commands
platform/x86: dell-ddv: Fix temperature scaling
platform/x86: dell-ddv: Fix cache invalidation on resume
platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
|
|
DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit
dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled")
in linux-next), so remove that select from the DRM_MSM Kconfig file.
Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/523353/
Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org
[rob: tweak commit message to make checkpatch.pl happy]
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The assigned timeslot masks are 64bit values.
In case of 64 timeslots the code uses (1 << 64) which is undefined on a
64bit value. On the PowerPC architecture, this lead to an incorrect
result as (1 << 64) produces the same result as (1 << 0).
Fix the masks values taking care of the 64 timeslots case.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/167819855177.26.11163930602844526001@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To last 2 parameters to cfg80211_get_bss() should be of
the enum ieee80211_bss_type resp. enum ieee80211_privacy types,
which WLAN_CAPABILITY_ESS very much is not.
Fix both cfg80211_get_bss() calls in ioctl_cfg80211.c to pass
the right parameters.
Note that the second call was already somewhat fixed by commenting
out WLAN_CAPABILITY_ESS and passing in 0 instead. This was still
not entirely correct though since that would limit returned
BSS-es to ESS type BSS-es with privacy on.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230306153512.162104-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are 2 issues with the key-store index handling
1. The non WEP key stores can store keys with indexes 0 - BIP_MAX_KEYID,
this means that they should be an array with BIP_MAX_KEYID + 1
entries. But some of the arrays where just BIP_MAX_KEYID entries
big. While one other array was hardcoded to a size of 6 entries,
instead of using the BIP_MAX_KEYID define.
2. The rtw_cfg80211_set_encryption() and wpa_set_encryption() functions
index check where checking that the passed in key-index would fit
inside both the WEP key store (which only has 4 entries) as well as
in the non WEP key stores. This breaks any attempts to set non WEP
keys with index 4 or 5.
Issue 2. specifically breaks wifi connection with some access points
which advertise PMF support. Without this fix connecting to these
access points fails with the following wpa_supplicant messages:
nl80211: kernel reports: key addition failed
wlan0: WPA: Failed to configure IGTK to the driver
wlan0: RSN: Failed to configure IGTK
wlan0: CTRL-EVENT-DISCONNECTED bssid=... reason=1 locally_generated=1
Fix 1. by using the right size for the key-stores. After this 2. can
safely be fixed by checking the right max-index value depending on the
used algorithm, fixing wifi not working with some PMF capable APs.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230306153512.162104-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that
is not available. This script is not part of the kernel and it is not
officially available on the www. The result is that this lines are just
dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230301215441.GA14049@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function _rtl92e_dm_check_ac_dc_power calling a script
/etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script
is not part of the kernel and it is not available on the www. The result
is that this function is just dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230228202857.GA16442@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix deletion of existing DSCP mappings in the APP table.
Adding and deleting DSCP entries are replicated per-port, since the
mapping table is global for all ports in the chip. Whenever a mapping
for a DSCP value already exists, the old mapping is deleted first.
However, it is only deleted for the specified port. Fix this by calling
sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be.
Reproduce:
// Map and remap DSCP value 63
$ dcb app add dev eth0 dscp-prio 63:1
$ dcb app add dev eth0 dscp-prio 63:2
$ dcb app show dev eth0 dscp-prio
dscp-prio 63:2
$ dcb app show dev eth1 dscp-prio
dscp-prio 63:1 63:2 <-- 63:1 should not be there
Fixes: 8dcf69a64118 ("net: microchip: sparx5: add support for offloading dscp table")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
detection
NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.
Fixes: 4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With older compilers like gcc-9, the calculation of the vlan
priority field causes a false-positive warning from the byteswap:
In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4:
drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower':
include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow]
15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16'
106 | ___constant_swab16(x) : \
| ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16'
42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
| ^~~~~~~~
include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16'
96 | #define cpu_to_be16 __cpu_to_be16
| ^~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16'
1458 | cpu_to_be16((match.key->vlan_priority <<
| ^~~~~~~~~~~
After a change to be16_encode_bits(), the code becomes more
readable to both people and compilers, which avoids the warning.
Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There were few smatch warnings reported by Dan:
- ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner
- return values in ice_vsi_cfg_def were ignored
- in ice_vsi_rebuild return value was ignored in case rebuild failed,
it was a never reached code, however, rewrite it for clarity.
- ice_vsi_cfg_tc can return 0 instead of ret
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
