Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
|
|
When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.
Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.
This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.
How to test:
User can get the coalesce value using ethtool command.
Example command:
Get: ethtool -c <interface>
Previous output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
New output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.
Invoke xdp_do_flush() before leaving NAPI.
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).
Invoke xdp_do_flush() also in the error path.
Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70ad152b ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Directly use tbo's start address will miss the domain start offset. Need
to use gpu_offset instead.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
On eDP we can receive invalid modes from dm_update_crtc_state() for
entirely new streams for which drm_mode_set_crtcinfo() shouldn't be
called on. So, instead of calling drm_mode_set_crtcinfo() from within
create_stream_for_sink() we can instead call it from
amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call
drm_mode_set_crtcinfo() for valid modes from that function (invalid
modes are rejected by that callback) and that is the only user
of create_validate_stream_for_sink() that we need to call
drm_mode_set_crtcinfo() for (as before commit cb841d27b876
("drm/amd/display: Always pass connector_state to stream validation"),
that is the only place where create_validate_stream_for_sink()'s
dm_state was NULL).
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693
Fixes: cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes a memory leak in the amdgpu_ras_feature_enable() function.
The leak occurs when the function sends a command to the firmware to enable
or disable a RAS feature for a GFX block. If the command fails, the kfree()
function is not called to free the info memory.
Fixes: 9f051d6ff13f ("drm/amdgpu: Free ras cmd input buffer properly")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
devm_kstrdup() returns pointer to allocated string on success,
NULL on failure. So it is better to check the return value of it.
Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This reverts commit 7748ce5b69581325cae40c2134088820f0957902.
vbios_version sysfs node is used to identify Part Number also. Revert to
the same so that it doesn't break scripts/software which parse this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[What]
MST now recognizes both connected displays
Fixes: 927e784c180c ("drm/amd/display: Add symclk enable/disable during stream enable/disable")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The removed line prevents the following cleanup function
to execute a dma_fence_put on the out_fence to free its
memory, producing the following output in kmemleak:
unreferenced object 0xffff888126d8ee00 (size 128):
comm "kwin_wayland", pid 981, jiffies 4295380296 (age 390.060s)
hex dump (first 32 bytes):
c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............
30 1a e1 2e a6 00 00 00 28 fc 5b 17 81 88 ff ff 0.......(.[.....
backtrace:
[<0000000011655661>] kmalloc_trace+0x26/0xa0
[<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu]
[<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu]
[<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm]
[<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm]
[<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100
[<0000000011fa801e>] do_syscall_64+0x5b/0xc0
[<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
unreferenced object 0xffff888121930500 (size 128):
comm "kwin_wayland", pid 981, jiffies 4295380313 (age 390.096s)
hex dump (first 32 bytes):
c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............
f9 ec d7 2f a6 00 00 00 28 fc 5b 17 81 88 ff ff .../....(.[.....
backtrace:
[<0000000011655661>] kmalloc_trace+0x26/0xa0
[<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu]
[<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu]
[<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm]
[<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm]
[<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100
[<0000000011fa801e>] do_syscall_64+0x5b/0xc0
[<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[...]
This memleak will grow quickly, being possible to see the
following line in dmesg after few minutes of life in the
virtual machine:
[ 706.217388] kmemleak: 10731 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
The patch will remove the line to allow the cleanup
function do its job.
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Fixes: e4812ab8e6b1 ("drm/virtio: Refactor and optimize job submission code path")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912060824.5210-1-jose.pekkarinen@foxhound.fi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- driver fixes due to incorrect fwnode_handle_put() call
- bt8xx: bttv_risc_packed(): remove field checks
- vb2: frame_vector.c: replace WARN_ONCE with a comment
- imx219: a couple typo fixes and perform a full mode set
unconditionally
- uvcvideo: Fix OOB read
- some dependency fixes
* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
media: vb2: frame_vector.c: replace WARN_ONCE with a comment
media: uvcvideo: Fix OOB read
media: bt8xx: bttv_risc_packed(): remove field checks
media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
media: i2c: imx219: Perform a full mode set unconditionally
media: i2c: imx219: Fix crop rectangle setting when changing format
media: i2c: imx219: Fix a typo referring to a wrong variable
media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
media: ivsc: Depend on VIDEO_DEV
media: via: Use correct dependency for camera sensor drivers
media: v4l: Use correct dependency for camera sensor drivers
media: pci: ivsc: Select build dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes, plus a new device ID for Intel Granite
Rapids systems.
The fix for the i.MX driver is fairly urgent, it's fixing a data
corruption issue when bits per word isn't 8.
There's also one fix which was queued but not sent for v6.4 due to
being minor and arriving at the end of the release"
* tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: Take in account bits per word instead of assuming 8-bits
spi: intel-pci: Add support for Granite Rapids SPI serial flash
spi: stm32: add a delay before SPI disable
spi: nxp-fspi: reset the FLSHxCR1 registers
spi: zynqmp-gqspi: fix clock imbalance on probe failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for the tps6287x driver which was incorrectly specifying the
field for voltage range selection leading to incorrect voltages being
set"
* tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix voltage range selection
|
|
engine->stats is a union of execlist and guc stat objects. When execlist
specific fields are initialized, the initial state of guc stats is
affected. This results in bad busyness values when using GuC mode. Move
the execlist initialization from common code to execlist specific code.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912212247.1828681-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 4485bd519f5d6d620a29d0547ff3c982bdeeb468)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Move the check for "if (IS_ERR(obj))" in front of the call to
i915_gem_object_set_cache_coherency() which dereferences "obj".
Otherwise it will lead to a crash.
Fixes: 43aa755eae2c ("drm/i915/mtl: Update cache coherency setting for context structure")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/455b2279-2e08-4d00-9784-be56d8ee42e3@moroto.mountain
(cherry picked from commit c92ec50822fb84306d951520d81919328421acbd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The EDID returned by drm_bridge_get_edid() needs to be freed.
Fixes: 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131015.2472029-1-jani.nikula@intel.com
|
|
Buttress spec requires that the interrupt status is cleared at
the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT),
that implies that we have to mask out the global interrupt while
handling buttress interrupts.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822095238.3722815-1-stanislaw.gruszka@linux.intel.com
|
|
before check 'hwdev'
'hwdev' is checked too late and hwdev will not be NULL, so remove the check
Fixes: 2acf960e3be6 ("net: hinic: Add support for configuration of rx-vlan-filter by ethtool")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202309112354.pikZCmyk-lkp@intel.com/
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an error occurs after a successful irq_domain_add_linear() call, it
should be undone by a corresponding irq_domain_remove(), as already done
in the remove function.
Fixes: c6ce2b6bffe5 ("gpio: add TB10x GPIO driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are some attributes added by vxlan_fill_info() which are not
accounted for in vxlan_get_size(). Add them.
I didn't find a way to trigger an actual problem from this miscalculation
since there is usually extra space in netlink size calculations like
if_nlmsg_size(); but maybe I just didn't search long enough.
Fixes: 3511494ce2f3 ("vxlan: Group Policy extension")
Fixes: e1e5314de08b ("vxlan: implement GPE")
Fixes: 0ace2ca89cbd ("vxlan: Use checksum partial with remote checksum offload")
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The u_memcpya() function is supposed to return error pointers on
error. Returning NULL will lead to an Oops.
Fixes: e3885f712134 ("nouveau/u_memcpya: use vmemdup_user")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/10fd258b-466f-4c5b-9d48-fe61a3f21424@moroto.mountain
|
|
I think there are limit checks in place for most things but the
new uAPI wants to not have them.
Add a limit check and use the vmemdup_user helper instead.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810185020.231135-1-airlied@gmail.com
|
|
Always stop and re-start the scheduler in order to let the scheduler
free up the timedout job in case it got signaled. In case of exec jobs
the job type specific callback will take care to signal all fences and
tear down the channel.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230916162835.5719-1-dakr@redhat.com
|
|
Fix the following warning.
drivers/gpu/drm/nouveau/nouveau_fence.c:210:45: sparse: sparse:
incorrect type in initializer (different address spaces)
@@ expected struct nouveau_channel *chan
@@ got struct nouveau_channel [noderef] __rcu *channel
We're just about to emit the fence, there is nothing to protect against
yet, hence it is safe to just cast __rcu away.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309140340.BwKXzaDx-lkp@intel.com/
Fixes: 978474dc8278 ("drm/nouveau: fence: fix undefined fence state after emit")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230916011501.15813-1-dakr@redhat.com
|
|
The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN
parameter.
In this case, when the TX FIFO gets empty and the last command didn't have
the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until
a new command is pushed into the TX FIFO or the transfer is aborted.
When the controller is holding SCL low, it cannot be disabled.
The transfer must first be aborted.
Also, the bus recovery won't work because SCL is held low by the master.
Check if the master is holding SCL low in __i2c_dw_disable() before trying
to disable the controller. If SCL is held low, an abort is initiated.
When the abort is done, then proceed with disabling the controller.
This whole situation can happen for instance during SMBus read data block
if the slave just responds with "byte count == 0".
This puts the driver in an unrecoverable state, because the controller is
holding SCL low and the current __i2c_dw_disable() procedure is not
working. In this situation only a SoC reset can fix the i2c bus.
Co-developed-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Unaccepted table is now allocated from EFI_ACPI_RECLAIM_MEMORY. It
translates into E820_TYPE_ACPI, which is not added to memblock and
therefore not mapped in the direct mapping.
This causes a crash on the first touch of the table.
Use memblock_add() to make sure that the table is mapped in direct
mapping.
Align the range to the nearest page borders. Ranges smaller than page
size are not mapped.
Fixes: e7761d827e99 ("efi/unaccepted: Use ACPI reclaim memory for unaccepted memory table")
Reported-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This fix was originally queued at the end of the 6.4 cycle but as it was
minor it never actually got sent.
|
|
Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. we think firmware watchdog initialization is completed
before hns3 clear the firmware interrupt source. However, firmware
initialization may not complete early.
so we add delay before hns3 clear firmware interrupt source and 5 ms delay
is enough to avoid second firmware reset interrupt.
Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Firmware does not respond driver commands during reset
Therefore, rule will fail to delete while the firmware is resetting
So, if failed to delete rule, set rule state to TO_DEL,
and the rule will be deleted when periodic task being scheduled.
Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver will enable unicast promisc for the function
once configure mac address fail. It's unreasonable when the failure
is caused by using same mac address with other functions. So only
enable unicast promisc when mac table full.
Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The device_version V3 hardware can't offload the checksum for IP in GRE
packets, but can do it for NvGRE. So default to disable the checksum and
GSO offload for GRE, but keep the ability to enable it when only using
NvGRE.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the vf cmdq is disabled, there is no need to keep these task running.
So this patch skip these task when the cmdq is disabled.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have to unregister tco_pdev also if i2c_add_adapter() fails.
Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
commit 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics
where necessary") caused one regression as found by Uwe, the backtrace
looks like:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21
Hardware name: STM32 (Device Tree Support)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x60/0x90
dump_stack_lvl from register_lock_class+0x98c/0x99c
register_lock_class from __lock_acquire+0x74/0x293c
__lock_acquire from lock_acquire+0x134/0x398
lock_acquire from stmmac_get_stats64+0x2ac/0x2fc
stmmac_get_stats64 from dev_get_stats+0x44/0x130
dev_get_stats from rtnl_fill_stats+0x38/0x120
rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4
rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144
rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88
rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec
__dev_notify_flags from dev_change_flags+0x50/0x5c
dev_change_flags from ip_auto_config+0x2f4/0x1260
ip_auto_config from do_one_initcall+0x70/0x35c
do_one_initcall from kernel_init_freeable+0x2ac/0x308
kernel_init_freeable from kernel_init+0x1c/0x138
kernel_init from ret_from_fork+0x14/0x2c
The reason is the rxq|txq_stats structures are not what expected
because stmmac_open() -> __stmmac_open() the structure is overwritten
by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));"
This causes the well initialized syncp member of rxq|txq_stats is
overwritten unexpectedly as pointed out by Johannes and Uwe.
Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For
SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats
as ____cacheline_aligned_in_smp.
Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit in Fixes has removed an fwnode_graph_get_endpoint_by_id() call
in mipi_csis_subdev_init().
So the reference that was taken should not be released anymore in the
error handling path of the probe and in the remove function.
Remove the now incorrect fwnode_handle_put() calls.
Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There are several functions involved for performing the functionality
of evtchn_do_upcall():
- __xen_evtchn_do_upcall() doing the real work
- xen_hvm_evtchn_do_upcall() just being a wrapper for
__xen_evtchn_do_upcall(), exposed for external callers
- xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but
without any user
Simplify this maze by:
- removing the unused xen_evtchn_do_upcall()
- removing xen_hvm_evtchn_do_upcall() as the only left caller of
__xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to
xen_evtchn_do_upcall()
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Skip non-existent ALARM attribute to avoid a shift-out-of-bounds
dmesg warning.
Reported-by: Doug Smythies <dsmythies@telus.net>
Closes: https://lore.kernel.org/linux-hwmon/ZQVzdlHgWdFhOVyQ@debian.me/T/#mc69b690660eb50734a6b07506d74a119e0266f1b
Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230918184722.2033225-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.
Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Link: https://lore.kernel.org/r/20230914130356.235912-1-admin@dennisbonke.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
intel_scu_ipc_dev_simple_command()
Andy discovered this bug during patch review. The 'scu' argument to this
function shouldn't be overridden by the function itself. It doesn't make
any sense. Looking at the commit history, we see that commit
f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
removed the setting of the scu to ipcdev in other functions, but not
this one. That was an oversight. Remove this line so that we stop
overriding the scu instance that is used by this function.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ipc_wait_for_interrupt()
It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.
CPU0 SCU
---- ---
ipc_wait_for_interrupt()
wait_for_completion_timeout(&scu->cmd_complete)
[TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
<long time scheduled away>
if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes: e7b7ab3847c9 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The IMX spi driver has a hardcoded 8, breaking the driver for word
lengths other than 8.
Signed-off-by: Stefan Moring <stefanmoring@gmail.com>
Reported-by: Sebastian Reichel <sre@kernel.org>
Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Tested-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230917164037.29284-1-stefanmoring@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip()
function") updating a trip point temperature doesn't actually work,
because the value supplied by user space is subsequently overwritten
with the current trip point hysteresis value.
Fix this by changing the code to parse the number string supplied by
user space after retrieving the current trip point data from the
thermal zone.
Also drop a redundant tab character from the code in question.
Fixes: 2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip() function")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
|
|
A bug was introduced during unification of setting CAP_SMP_T_SWCOORD for
the _PDC and _OSC methods.
The third u32 in the buffer is never cleared before setting bits on it.
The memory is not guaranteed to be zero as it was allocated by kmalloc()
instead of kzalloc().
Fix this by initializing the third u32 in the buffer to 0.
Fixes: b9e8d0168a7a ("ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to the NAPI documentation networking/napi.rst, Rx specific
APIs like page pool and XDP cannot be used at all when budget is 0.
skb Tx processing should happen regardless of the budget.
Stop NAPI polling after Tx processing and skip Rx processing if budget
is 0.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the NAPI documentation networking/napi.rst, for the ethtool
API a channel is a IRQ/NAPI which services queues of a given type.
tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair.
Therefore, combined channels shall be returned instead of separate tx/rx
channels.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|