summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-08-04drm/kms: slave encoder interface.Francisco Jerez2-1/+117
Define some helper functions to make easier to detach a KMS encoder implementation from the drm module of the GPU it's used in. This is mainly useful for some external I2C encoders known to be present on cards with GPUs from several different manufacturers. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Add the debug info in generic drm mode by using DRM_DEBUG_KMSZhao Yakui2-33/+40
Add the debug info in generic drm mode by using DRM_DEBUG_KMS Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Remove the macro defintion of DRM_DEBUG_MODEZhao Yakui1-2/+2
Two macro definitions of DRM_DEBUG_KMS/MODE can be used to add the debug info related with KMS. It is confusing. So remove the macro definition of DRM_DEBUG_MODE. Instead it can be replaced by the DRM_DEBUG_KMS. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Remove the unused prefix in DRM_DEBUG_KMS/DRIVER/MODEZhao Yakui4-51/+37
We will have to add a prefix when using the macro defintion of DRM_DEBUG_KMS /DRM_DEBUG_DRIVER/MODE. It is not convenient. We should use the DRM_NAME as default prefix. So remove the prefix in the macro definition of DRM_DEBUG_KMS/DRIVER/MODE. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15drm/mode: get the modeline for standard timing in EDID by using CVT/GTFZhao Yakui1-12/+58
Create the standard timing modeline by using CVT/GFT algorithm while interpreting the EDID. In course of interpreting the EDID, the timing level will be obtained, which is used to determine whether the CVT/GTF algorithm is selected to generate the modeline for the given hdisplay/vdisplay/vrefresh_rate. In the UMS mode firstly it will check whether it can be found in the DMT table. If it can be found, then the modeline is returned. Then the timing_level is used to choose CVT/GTF. As there is no DMT table, no modeline is returned when timing level is DMT. For the other two timing levels, the CVT/GTF will be called to generate the required standard timing modeline. [airlied: fixed up conflicts since EDID rework] Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15drm/mode: add the GTF algorithm in kernel spaceZhao Yakui1-0/+197
Add the GTF algorithm in kernel space. And this function can be called to generate the required modeline. I copied it from the file of xserver/hw/xfree86/modes/xf86gtf.c. What I have done is to translate it by using integer calculation. This is to avoid the float-point calculation in kernel space. At the same tie I also refer to the function of fb_get_mode in drivers/video/fbmon.c Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15drm/mode: add the CVT algorithm in kernel spaceZhao Yakui1-0/+219
Add the CVT algorithm in kernel space. And this function can be called to generate the required modeline. I copied it from the file of xserver/hw/xfree86/modes/xf86cvt.c. What I have done is to translate it by using integer calculation. This is to avoid the float-point calculation in kernel space. [airlied:- cleaned up some bits] Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15Merge branch 'i2c-for-2631-rc3' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds4-13/+23
* 'i2c-for-2631-rc3' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: Use resource_size i2c-davinci: behave with i2cdetect i2c-davinci: convert clock usage after clkdev conversion
2009-07-15Merge branch 'for-linus' of ↵Linus Torvalds2-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Add new ConnectX EN PCI ID 0x6764 mlx4_core: Handle multi-physical function devices
2009-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-49/+75
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines." skbuff.h: Fix comment for NET_IP_ALIGN drivers/net: using spin_lock_irqsave() in net_send_packet() NET: phy_device, fix lock imbalance gre: fix ToS/DiffServ inherit bug igb: gcc-3.4.6 fix atlx: duplicate testing of MCAST flag NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines. netdev: restore MTU change operation netdev: restore MAC address set and validate operations sit: fix regression: do not release skb->dst before xmit net: ip_push_pending_frames() fix net: sk_prot_alloc() should not blindly overwrite memory
2009-07-15i2c: Use resource_sizeJulia Lawall4-8/+8
Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-15i2c-davinci: behave with i2cdetectDavid Brownell1-4/+14
Make i2c-davinci cope properly with "i2cdetect": don't spew syslog spam on perfectly normal behaviors, or respond to any address other than the one reserved for the SMBus host. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-15i2c-davinci: convert clock usage after clkdev conversionKevin Hilman1-1/+1
DaVinci core code has converted to the new clkdev API so clock name strings are not needed. Instead, just the a 'struct device' pointer is needed. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-15Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line ↵David S. Miller5-68/+44
disciplines." This reverts commit adeab1afb7de89555c69aab5ca21300c14af6369. As Alan Cox explained, the TTY layer changes that went recently to get rid of the tty->low_latency stuff fixes this already, and even for -stable it's the ->low_latency changes that should go in to fix this, rather than this patch. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-14drivers/net: using spin_lock_irqsave() in net_send_packet()Dongdong Deng2-5/+7
spin_unlock_irq() will enable interrupt in net_send_packet(), this patch changes it to spin_lock_irqsave/spin_lock_irqrestore, so that it doesn't enable interrupts when already disabled, and netconsole would work properly over cs89x0/isa-skeleton. Call trace: netconsole write_msg() { ... -> spin_lock_irqsave(); -> netpoll_send_udp() -> netpoll_send_skb() -> net_send_packet() ->... -> spin_unlock_irqrestore(); ... } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-14NET: phy_device, fix lock imbalanceJiri Slaby1-1/+3
Don't forget to unlock a mutex in phy_scan_fixups on a fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13igb: gcc-3.4.6 fixEric Dumazet1-40/+37
forward declaration of inline function should be avoided, or old gcc cannot compile. Reported-by: Teck Choon Giam <giamteckchoon@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13atlx: duplicate testing of MCAST flagroel kluin1-1/+1
Fix duplicate testing of MCAST flag Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds14-79/+80
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME Staging: rtl8192su: convert to net_device_ops Staging: serqt_usb2: declare qt_open static in serqt_usb2 Staging: serqt_usb2: fix qt_close parameters in serqt_usb2 Staging: comedi: jr3_pci.c: add required includes Staging: meilhaus: add email address to TODO Staging: rspiusb: use NULL virtual address instead of a bogus one Staging: vt6655: compile fix Staging: rt2870: Add USB ID for Sitecom WL-608
2009-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds4-11/+16
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: wm97xx_batery: replace driver_data with dev_get_drvdata() omap: video: remove direct access of driver_data Sound: remove direct access of driver_data driver model: fix show/store prototypes in doc. Firmware: firmware_class, fix lock imbalance Driver Core: remove BUS_ID_SIZE sparc: remove driver-core BUS_ID_SIZE partitions: fix broken uevent_suppress conversion devres: WARN() and return, don't crash on device_del() of uninitialized device
2009-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds46-2204/+574
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits) USB: otg: fix module reinsert issue USB: handle zero-length usbfs submissions correctly USB: EHCI: report actual_length for iso transfers USB: option: remove unnecessary and erroneous code USB: cypress_m8: remove invalid Clear-Halt USB: musb_host: undo incorrect change in musb_advance_schedule() USB: fix LANGID=0 regression USB: serial: sierra driver id_table additions USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. USB: fix race leading to a write after kfree in usbfs USB: Sierra: fix oops upon device close USB: option.c: add A-Link 3GU device id USB: Serial: Add support for Arkham Technology adapters USB: Fix option_ms regression in 2.6.31-rc2 USB: gadget audio: select SND_PCM USB: ftdi: support NDI devices Revert USB: usbfs: deprecate and hide option for !embedded USB: usb.h: fix kernel-doc notation USB: RNDIS gadget, fix issues talking from PXA USB: serial: FTDI with product code FB80 and vendor id 0403 ...
2009-07-13Fix staging drivers after smp_lock.h reduxJean Delvare2-0/+2
Commit 405f55712dfe464b3240d7816cc4fe4174831be2 ("headers: smp_lock.h redux") broke the build of two staging drivers. Fix them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-13NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines.Ralf Baechle5-44/+68
Guido Trentalancia reports: I am trying to use the kiss driver in the Linux kernel that is being shipped with Fedora 10 but unfortunately I get the following oops: mkiss: AX.25 Multikiss, Hans Albas PE1AYX mkiss: ax0: crc mode is auto. ADDRCONF(NETDEV_CHANGE): ax0: link becomes ready ------------[ cut here ]------------ WARNING: at kernel/softirq.c:77 __local_bh_disable+0x2f/0x83() (Not tainted) [...] unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.27.25-170.2.72.fc10.i686 #1 [<c042ddfb>] warn_on_slowpath+0x65/0x8b [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb [<c042431e>] ? enqueue_entity+0x203/0x20b [<c0424361>] ? enqueue_task_fair+0x3b/0x3f [<c041f88c>] ? resched_task+0x3a/0x6e [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16 [<c043255b>] __local_bh_disable+0x2f/0x83 [<c04325ba>] local_bh_disable+0xb/0xd [<c06ab4e2>] _spin_lock_bh+0xb/0x16 [<f8b6f600>] mkiss_receive_buf+0x2fb/0x3a6 [mkiss] [<c0572a30>] flush_to_ldisc+0xf7/0x198 [<c0572b12>] tty_flip_buffer_push+0x41/0x51 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio] [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f [<c05eaabf>] uhci_scan_schedule+0x52e/0x767 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1 [<c05ec5b0>] uhci_irq+0x110/0x125 [<c05d4834>] usb_hcd_irq+0x40/0xa3 [<c0465313>] handle_IRQ_event+0x2f/0x64 [<c046642b>] handle_level_irq+0x74/0xbe [<c04663b7>] ? handle_level_irq+0x0/0xbe [<c0406e6e>] do_IRQ+0xc7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d [<c0617f52>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c069b1ba>] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- ------------[ cut here ]------------ WARNING: at kernel/softirq.c:136 _local_bh_enable_ip+0x3d/0xc4() [...] Pid: 0, comm: swapper Tainted: G W 2.6.27.25-170.2.72.fc10.i686 [<c042ddfb>] warn_on_slowpath+0x65/0x8b [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb [<c042431e>] ? enqueue_entity+0x203/0x20b [<c0424361>] ? enqueue_task_fair+0x3b/0x3f [<c041f88c>] ? resched_task+0x3a/0x6e [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16 [<f8b6f642>] ? mkiss_receive_buf+0x33d/0x3a6 [mkiss] [<c04325f9>] _local_bh_enable_ip+0x3d/0xc4 [<c0432688>] local_bh_enable_ip+0x8/0xa [<c06ab54d>] _spin_unlock_bh+0x11/0x13 [<f8b6f642>] mkiss_receive_buf+0x33d/0x3a6 [mkiss] [<c0572a30>] flush_to_ldisc+0xf7/0x198 [<c0572b12>] tty_flip_buffer_push+0x41/0x51 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio] [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f [<c05eaabf>] uhci_scan_schedule+0x52e/0x767 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1 [<c05ec5b0>] uhci_irq+0x110/0x125 [<c05d4834>] usb_hcd_irq+0x40/0xa3 [<c0465313>] handle_IRQ_event+0x2f/0x64 [<c046642b>] handle_level_irq+0x74/0xbe [<c04663b7>] ? handle_level_irq+0x0/0xbe [<c0406e6e>] do_IRQ+0xc7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d [<c0617f52>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c069b1ba>] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- mkiss: ax0: Trying crc-smack mkiss: ax0: Trying crc-flexnet The issue was, that the locking code in mkiss was assuming it was only ever being called in process or bh context. Fixed by converting the involved locking code to use irq-safe locks. Review of other networking line disciplines shows that 6pack, both sync and async PPP and STRIP have similar issues. The ppp_async one is the most interesting one as it sorts out half of the issue as far back as 2004 in commit http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=2996d8deaeddd01820691a872550dc0cfba0c37d Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Guido Trentalancia <guido@trentalancia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13USB: otg: fix module reinsert issueAjay Kumar Gupta1-0/+1
Platform_device instance (pd) is not set to NULL in usb_nop_xceiv_unregister() causing usb_nop_xceiv_register() to fail during module reinsert. From: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Babu Ravi <ravibabu@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
2009-07-13USB: handle zero-length usbfs submissions correctlyAlan Stern1-21/+20
This patch (as1262) fixes a bug in usbfs: It refuses to accept zero-length transfers, and it insists that the buffer pointer be valid even if there is no data being transferred. The patch also consolidates a bunch of repetitive access_ok() checks into a single check, which incidentally fixes the lack of such a check for Isochronous URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: EHCI: report actual_length for iso transfersAlan Stern1-4/+8
This patch (as1259b) makes ehci-hcd return the total number of bytes transferred in urb->actual_length for Isochronous transfers. Until now, the actual_length value was unaccountably left at 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: option: remove unnecessary and erroneous codeAlan Stern1-26/+1
This patch (as1264) removes a bunch of unnecessary and erroneous stuff from the option USB-serial driver. Clearly there's no need to verify that the device pointer stored in the URBs is right or to store the same pointer over again. After all, the pointer can't change once it has been set up. There's also no need to call usb_clear_halt for the IN endpoint multiple times -- in fact, doing so is an error since every time after the first there will be active URBs queued for that endpoint. Since the Clear-Halts don't appear to be needed at all, the patch simply removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: cypress_m8: remove invalid Clear-HaltAlan Stern1-2/+2
This patch (as1265) removes an erroneous call to usb_clear_halt from the cypress_m8 driver. The call isn't valid because it is made from interrupt context whereas usb_clear_halt is a blocking routine. Presumably the code has never been executed; if it did it would cause an oops. So instead treat -EPIPE like any other sort of unexplained error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: musb_host: undo incorrect change in musb_advance_schedule()Sergei Shtylyov1-1/+1
Commit c9cd06b3d6ea825c62e277def929cc4315802b48 (musb_host: refactor URB giveback) included due to my overlook the change incorrect in the context of the current kernel -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: fix LANGID=0 regressionDaniel Mack1-18/+45
commit b7af0bb ("USB: allow malformed LANGID descriptors") broke support for devices without string descriptor support. Reporting string descriptors is optional to USB devices, and a device lets us know it can't deal with strings by responding to the LANGID request with a STALL token. The kernel handled that correctly before b7af0bb came in, but failed hard if the LANGID was reported but broken. More than that, if a device was not able to provide string descriptors, the LANGID was retrieved over and over again at each string read request. This patch changes the behaviour so that a) the LANGID is only queried once b) devices which can't handle string requests are not asked again c) devices with malformed LANGID values have a sane fallback to 0x0409 Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: serial: sierra driver id_table additionsElina Pasheva1-17/+29
- Updated the id_table with all devices that Sierra Wireless currently support - Re-ordered the contents of the id_table for better readability Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.Krzysztof Halasa2-0/+4
Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: fix race leading to a write after kfree in usbfsOliver Neukum1-4/+17
this fixes a race between async_completed() and proc_reapurbnonblock(). CPU A CPU B spin_lock(&ps->lock); list_move_tail(&as->asynclist, &ps->async_completed); spin_unlock(&ps->lock); if (!(as = async_getcompleted(ps))) return -EAGAIN; return processcompl(as, (void __user * __user *)arg); processcompl() calls free_async() which calls kfree(as) as->status = urb->status; if (as->signr) { sinfo.si_signo = as->signr; sinfo.si_errno = as->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid, as->euid, as->secid); } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb, as->userurb); write after kfree Signed-off-by: Oliver Neukum <oliver@neukum.org>
2009-07-13USB: Sierra: fix oops upon device closeAlan Stern1-3/+2
This patch (as1263) fixes a mixup that occurred when conflicting patches for the sierra driver were merged incorrectly. The former sierra_shutdown routine should have been become sierra_release, not sierra_disconnect. The symptom this fixes is an oops when the device file is closed after a Sierra device has been unplugged (Bugzilla #13675). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Peter Naulls <peter@mushroomnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: option.c: add A-Link 3GU device idAnssi Hannula1-1/+5
Add A-Link 3GU device id 1e0e:9200 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 1e0e:f000 device and must be switched to 1e0e:9200 mode either by using "eject CD" or usb_modeswitch. For the record, the device does not work with generic usbserial driver (usb disconnect when sending the ATDT command). Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: Serial: Add support for Arkham Technology adaptersAmit Kucheria1-0/+2
As reported by David Potts from Arkham Technology, the current driver works with their hardware on addition of the device ids. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: Fix option_ms regression in 2.6.31-rc2Jonathan McDowell1-0/+3
Commit 32ebbe7b6ad44ae9c276419710b56de6ba705303 which filters the SCSI REZERO command in option_ms based on a SCSI INQUIRY with a vendor of Option breaks my Option Icon 225 (0af0:6971). This device returns a vendor of ZCOPTION for the ZeroCD device. The following trivial patch fixes things for me. Signed-Off-By: Jonathan McDowell <noodles@earth.li> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: gadget audio: select SND_PCMRandy Dunlap1-0/+1
Fix USB gadget audio: select SND_PCM, like many other sound drivers do, to fix build errors: drivers/built-in.o: In function `f_audio_playback_work': audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl' audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write' drivers/built-in.o: In function `_snd_pcm_hw_param_set': audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any' drivers/built-in.o: In function `gaudio_setup': (.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: ftdi: support NDI devicesMartin Geleynse2-4/+69
It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13Revert USB: usbfs: deprecate and hide option for !embeddedGreg Kroah-Hartman1-1/+1
This reverts commit cc71329b3b89b4a5be849b617f2c4f151f0b9213, so that Red Hat machines can boot properly. It seems that the Red Hat initrd code tries to watch the /proc/bus/usb/devices file to monitor usb devices showing up. While this task is prone to lots of races and does not show the true state of the system, they seem to like it. So for now, don't move this option under the EMBEDDED config option. Cc: Scott James Remnant <scott@canonical.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Peter Jones <pjones@redhat.com> Cc: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: RNDIS gadget, fix issues talking from PXADavid Brownell1-5/+6
The reworked Ethernet gadget has an RNDIS interop problem when used with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware, which currently has a hard time talking to MS-Windows hosts. The issue is that Microsoft requires USB_CLASS_COMM. Fix by tweaking the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS is used in some other device configuration. [ UPDATED: some "statements" were comma-terminated; fix that. ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Aric Blumer <aric@sdgsystems.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: serial: FTDI with product code FB80 and vendor id 0403Folkert van Heusden2-0/+2
It seems an USB device with vendor id 0403 and product code FB80 has an FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm This device in fact is a true random generantor by comsci: http://comscire.com/Products/R2000KU/ So the following patch should add support for this device if I am correct. Not tested as I do not own this device (I would like support in the kernel so that my entropybroker application (which distributes entrop data (random values) between servers and clients)). From: Folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: console: Fix regression in usb console on kernel bootJason Wessel2-7/+9
The commit 335f8514f200e63d689113d29cb7253a5c282967 introduced a regression which stopped usb consoles from working correctly as a kernel boot console as well as interactive login device. The addition of the serial_close() which in turn calls tty_port_close_start() will change the reference count of port.count and warn about it. The usb console code had previously incremented the port.count to indicate it was making use of the device as a console and the forced change causes a double open on the usb device which leads to a non obvious kernel oops later on when the tty is freed. To fix the problem instead make use of port->console to track if the port is in fact an active console port to avoid double initialization of the usb serial device. The port.count is incremented and decremented only with in the scope of usb_console_setup() for the purpose of the low level driver initialization. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: add missing class descriptions used in usb/devices fileFrans Pop1-4/+6
Added descriptions (for WIRELESS_CONTROLLER and MISC) were taken from the usb-devices script now included in usbutils. Also sort the classes in the same order as in include/linux/usb/ch9.h for easier comparison for future updates. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: fix memleak in usbfsOliver Neukum1-6/+10
This patch fixes a memory leak in devio.c::processcompl If writing to user space fails the packet must be discarded, as it already has been removed from the queue of completed packets. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: EHCI: check for STALL before other errorsAlan Stern1-14/+16
This patch (as1257) revises the way ehci-hcd detects STALLs. The logic is a little peculiar because there's no hardware status bit specifically meant to indicate a STALL. You just have to guess that a STALL was received if the BABBLE bit (which is fatal) isn't set and the transfer stopped before all its retries were used up. The existing code doesn't do this properly, because it tests for MMF (Missed MicroFrame) and DBE (Data Buffer Error) before testing the retry counter. Thus, if a transaction gets either MMF or DBE the corresponding flag is set and the transaction is retried. If the second attempt receives a STALL then -EPIPE is the correct return value. But the existing code would see the MMF or DBE flag instead and return -EPROTO, -ENOSR, or -ECOMM. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: EHCI: use the new clear_tt_buffer interfaceAlan Stern10-23/+86
This patch (as1256) changes ehci-hcd and all the other drivers in the EHCI family to make use of the new clear_tt_buffer callbacks. When a Clear-TT-Buffer request is in progress for a QH, the QH is not allowed to be linked into the async schedule until the request is finished. At that time, if there are any URBs queued for the QH, it is linked into the async schedule. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: fix the clear_tt_buffer interfaceAlan Stern4-17/+35
This patch (as1255) updates the interface for calling usb_hub_clear_tt_buffer(). Even the name of the function is changed! When an async URB (i.e., Control or Bulk) going through a high-speed hub to a non-high-speed device is cancelled or fails, the hub's Transaction Translator buffer may be left busy still trying to complete the transaction. The buffer has to be cleared; that's what usb_hub_clear_tt_buffer() does. It isn't safe to send any more URBs to the same endpoint until the TT buffer is fully clear. Therefore the HCD needs to be told when the Clear-TT-Buffer request has finished. This patch adds a callback method to struct hc_driver for that purpose, and makes the hub driver invoke the callback at the proper time. The patch also changes a couple of names; "hub_tt_kevent" and "tt.kevent" now look rather antiquated. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: fix uninitialised variable in ti_do_downloadOliver Neukum1-1/+1
Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13USB: option: add Novatel Ovation MC760Dan Williams1-0/+2
Used by Virgin Mobile with the Broadband2Go service, for example. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 01:59:22 +0300