summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-05-12i2c-eg20t: Call init() when wait-event timeout occursTomoya MORINAGA1-0/+24
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-mpc: avoid I2C abnormal after resuming from deep sleepZhao Chenhui1-0/+30
When entering deep sleep, the value in the registers I2CFDR and I2CDFSRR are lost. This causes I2C access to fail after resuming. Add suspend/resume routines to save/restore the registers I2CFDR and I2CDFSRR. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: sh_mobile: add device tree supportMagnus Damm1-0/+11
This patch enables DT support for the IIC driver used on SH-based SoCs such as sh7722 and sh7724 among others as well as SH-Mobile SoCs such as sh7367, sh7377, sh7372, sh73a0 and r8a7740. Tested with out-of-tree DT support code on the sh7372 Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-pnx.c: Remove duplicated i2c.hRoland Stigge1-3/+46
The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere else). This patch removes those and integrates the contents into the driver itself. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-pnx.c: Use resources in platformsRoland Stigge1-22/+25
As a precondition for device tree conversion, the platforms using i2c-pnx.c are converted to using mem and irq resources instead of platform data. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: designware: Add support for 16bit register accessStefan Roese2-11/+25
The STM SPEAr platform can only access the i2c controller register via 16bit read/write functions. This patch adds support to automatically detect this 16bit access mode. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: Dynamically assign adapter id if it wasn't explictly specifiedKarol Lewandowski3-14/+4
Commit 488bf314b ("i2c: Allow i2c_add_numbered_adapter() to assign a bus id") reworked i2c_add_numbered_adapter() to call i2c_add_adapter() if requested bus was -1. This allows to simplify driver's initialization procedure by using just one function for static and dynamic adapter id registration. This patch updates few more drivers (missed out in original patch) to use this functionality. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-pxa: Drop leftover commentKarol Lewandowski1-5/+0
Commit 488bf314b ("i2c: Allow i2c_add_numbered_adapter() to assign a bus id") reworked i2c-pxa driver leaving obsolete comment. This commit simply drops it. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-s3c2410: Drop unused defineKarol Lewandowski1-3/+1
Use standard of_match_ptr() to avoid defining variable unused in non device tree builds. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
2012-05-05Merge branch 'release' of ↵Linus Torvalds3-13/+10
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
2012-05-05ACPI: Fix D3hot v D3cold confusionLin Ming3-13/+10
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-05Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: Fix possible null pointer dereference in rtc-mpc5121.c
2012-05-05intel_mid_powerbtn: mark irq as IRQF_NO_SUSPENDYong Wang1-1/+1
So that the power button still wakes up the platform. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com Tested-by: Kangkai Yin <kangkai.yin@intel.com> Tested-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-14/+23
Pull drm fixes from Dave Airlie: "Some minor fixes from Intel and a radeon fix. I have the nouveau fix for the i2c regression queued for next week, its mostly a revert and seems to work on the system it was originally introduced for thanks to some i2c core changes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: clarify and extend wb setup on APUs and NI+ asics drm/i915: enable dip before writing data on gen4 fixing dmi match for hp t5745 and hp st5747 thin client drm/i915: Only enable IPS polling for gen5 drm/i915: Do not read non-existent DPLL registers on PCH hardware
2012-05-04Merge tag 'md-3.4-fixes' of git://neil.brown.name/mdLinus Torvalds2-5/+1
Pull one small fix for md/bitmaps from NeilBrown: "This fixes a regression that was introduced in the merge window." * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/bitmap: fix calculation of 'chunks' - missing shift.
2012-05-04drm/radeon: clarify and extend wb setup on APUs and NI+ asicsAlex Deucher1-2/+2
Use family rather than DCE check for clarity, also always use wb on APUs, there will never be AGP variants. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-04md/bitmap: fix calculation of 'chunks' - missing shift.NeilBrown2-5/+1
commit 61a0d80c "md/bitmap: discard CHUNK_BLOCK_SHIFT macro" replaced CHUNK_BLOCK_RATIO() by the same text that was replacing CHUNK_BLOCK_SHIFT() - which is clearly wrong. The result is that 'chunks' is often too small by 1, which can sometimes result in a crash (not sure how). So use the correct replacement, and get rid of CHUNK_BLOCK_RATIO which is no longe used. Reported-by: Karl Newman <siliconfiend@gmail.com> Tested-by: Karl Newman <siliconfiend@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-04Merge tag 'mfd-for-linus-3.4-rc6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull second set of MFD fixes from Samuel Ortiz: "This time we only have a one liner fixing an omap-usb build error." * tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix build breakage in omap-usb-host.c
2012-05-04Merge branch 'efi-vars' from Matthew GarrettLinus Torvalds1-16/+30
* efi-vars: efivars: Improve variable validation
2012-05-04efivars: Improve variable validationMatthew Garrett1-16/+30
Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04Merge tag 'tag/upstream-linus' of ↵Linus Torvalds5-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata fixes from Jeff Garzik: 1) Fix regression that could cause a misdiagnosis, which in turn could lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug and suspend/resume is involved. 2) Fix a regression that led to ata%d controller ids being numbered one larger than in <= 3.4-rc3 (oh, the horror!). Controller ids should now be as expected. 3) add some DT, PCI id's 4) ata/pata_arasan_cf: minor cpp fixing/cleaning * tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: ahci_platform: Add synopsys ahci controller in DT's compatible list ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros libata: init ata_print_id to 0 ahci: Detect Marvell 88SE9172 SATA controller libata: skip old error history when counting probe trials
2012-05-04Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds4-8/+15
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "Here are some typical i2c driver bugfixes for 3.4. Missed clock handling, improper timeout fixes, hardware wrokarounds... All patches have been in linux-next for a few days, too." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: mxs: disable QUEUE when sending is done i2c: mxs: handle spurious interrupt i2c-eg20t: Modify MODULE_AUTHOR's email address i2c-eg20t: change timeout value 50msec to 1000msec i2c: tegra: Add delay before resetting the controller after NACK i2c: pnx: Disable clk in suspend
2012-05-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-6/+17
Pull drm fixes from Dave Airlie: "Just some regression fixes from Ben along with a variable that gcc failed to spot is uninitialised." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: nouveau: initialise has_optimus variable. drm/nv10/gpio: fix thinko in mask for gpio lines 2-9 nvc0/fb: shut up PMFB interrupt after the first occurrence drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac drm/nouveau/bios: fix regression on some nv4x board
2012-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-271/+415
Pull networking fixes from David Miller: 1) Transfer padding was wrong for full-speed USB in ASIX driver, fix from Ingo van Lil. 2) Propagate the negative packet offset fix into the PowerPC BPF JIT. From Jan Seiffert. 3) dl2k driver's private ioctls were letting unprivileged tasks make MII writes and other ugly bits like that. Fix from Jeff Mahoney. 4) Fix TX VLAN and RX packet drops in ucc_geth, from Joakim Tjernlund. 5) OOPS and network namespace fixes in IPVS from Hans Schillstrom and Julian Anastasov. 6) Fix races and sleeping in locked context bugs in drop_monitor, from Neil Horman. 7) Fix link status indication in smsc95xx driver, from Paolo Pisati. 8) Fix bridge netfilter OOPS, from Peter Huang. 9) L2TP sendmsg can return on error conditions with the socket lock held, oops. Fix from Sasha Levin. 10) udp_diag should return meaningful values for socket memory usage, from Shan Wei. 11) Eric Dumazet is so awesome he gets his own section: Socket memory cgroup code (I never should have applied those patches, grumble...) made erroneous changes to sk_sockets_allocated_read_positive(). It was changed to use percpu_counter_sum_positive (which requires BH disabling) instead of percpu_counter_read_positive (which does not). Revert back to avoid crashes and lockdep warnings. Adjust the default tcp_adv_win_scale and tcp_rmem[2] values to fix throughput regressions. This is necessary as a result of our more precise skb->truesize tracking. Fix SKB leak in netem packet scheduler. 12) New device IDs for various bluetooth devices, from Manoj Iyer, AceLan Kao, and Steven Harms. 13) Fix command completion race in ipw2200, from Stanislav Yakovlev. 14) Fix rtlwifi oops on unload, from Larry Finger. 15) Fix hard_mtu when adjusting hard_header_len in smsc95xx driver. From Stephane Fillod. 16) ehea driver registers it's IRQ before all the necessary state is setup, resulting in crashes. Fix from Thadeu Lima de Souza Cascardo. 17) Fix PHY connection failures in davinci_emac driver, from Anatolij Gustschin. 18) Missing break; in switch statement in bluetooth's hci_cmd_complete_evt(). Fix from Szymon Janc. 19) Fix queue programming in iwlwifi, from Johannes Berg. 20) Interrupt throttling defaults not being actually programmed into the hardware, fix from Jeff Kirsher and Ying Cai. 21) TLAN driver SKB encoding in descriptor busted on 64-bit, fix from Benjamin Poirier. 22) Fix blind status block RX producer pointer deref in TG3 driver, from Matt Carlson. 23) Promisc and multicast are busted on ehea, fixes from Thadeu Lima de Souza Cascardo. 24) Fix crashes in 6lowpan, from Alexander Smirnov. 25) tcp_complete_cwr() needs to be careful to not rewind the CWND to ssthresh if ssthresh has the "infinite" value. Fix from Yuchung Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) sungem: Fix WakeOnLan tcp: change tcp_adv_win_scale and tcp_rmem[2] net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg drop_monitor: prevent init path from scheduling on the wrong cpu usbnet: fix failure handling in usbnet_probe usbnet: fix leak of transfer buffer of dev->interrupt ucc_geth: Add 16 bytes to max TX frame for VLANs net: ucc_geth, increase no. of HW RX descriptors netem: fix possible skb leak sky2: fix receive length error in mixed non-VLAN/VLAN traffic sky2: propogate rx hash when packet is copied net: fix two typos in skbuff.h cxgb3: Don't call cxgb_vlan_mode until q locks are initialized ixgbe: fix calling skb_put on nonlinear skb assertion bug ixgbe: Fix a memory leak in IEEE DCB igbvf: fix the bug when initializing the igbvf smsc75xx: enable mac to detect speed/duplex from phy smsc75xx: declare smsc75xx's MII as GMII capable smsc75xx: fix phy interrupt acknowledge smsc75xx: fix phy init reset loop ...
2012-05-04Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix OOPS seen in coretemp driver if the CPU core ID is too large" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (coretemp) Increase CPU core limit hwmon: (coretemp) fix oops on cpu unplug
2012-05-03ata: ahci_platform: Add synopsys ahci controller in DT's compatible listViresh Kumar1-0/+1
SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares ahci_platform driver with other controller versions. This patch updates DT compatible list for ahci_platform. It also updates and renames binding documentation to more generic name. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macrosViresh Kumar1-3/+1
#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move this definition and its usage outside of them. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03libata: init ata_print_id to 0Tero Roponen1-1/+1
When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the following differences: -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 -ata3: DUMMY +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 ata4: DUMMY ata5: DUMMY -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 +ata6: DUMMY +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 The change of numbering comes from commit 85d6725b7c0d7e3f ("libata: make ata_print_id atomic") that changed lines like ap->print_id = ata_print_id++; to ap->print_id = atomic_inc_return(&ata_print_id); As the latter behaves like ++ata_print_id, we must initialize it to zero to start the numbering from one. Signed-off-by: Tero Roponen <tero.roponen@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03ahci: Detect Marvell 88SE9172 SATA controllerMatt Johnson1-0/+2
The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked once it was detected, but was missing an ahci_pci_tbl entry. Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard. Signed-off-by: Matt Johnson <johnso87@illinois.edu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03libata: skip old error history when counting probe trialsLin Ming1-1/+2
Commit d902747("[libata] Add ATA transport class") introduced ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared. But ata_count_probe_trials_cb() didn't check this flag and it still counts the old error history. So wrong probe trials count is returned and it causes problem, for example, SATA link speed is slowed down from 3.0Gbps to 1.5Gbps. Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb(). Cc: stable <stable@vger.kernel.org> # 2.6.37+ Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03Merge branch 'drm-intel-fixes' of ↵Dave Airlie5-12/+21
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: enable dip before writing data on gen4 fixing dmi match for hp t5745 and hp st5747 thin client drm/i915: Only enable IPS polling for gen5 drm/i915: Do not read non-existent DPLL registers on PCH hardware
2012-05-03drm/i915: enable dip before writing data on gen4Paulo Zanoni1-1/+1
While testing with the intel_infoframes tool on gen4, I see that when video DIP is disabled, what we write to the DATA memory is not exactly what we read back later. This regression has been introduce in commit 64a8fc0145a1d0fdc25fc9367c2e6c621955fb3b Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Sep 22 11:16:00 2011 +0530 drm/i915: fix ILK+ infoframe support That commit was setting VIDEO_DIP_CTL to 0 when initializing, which caused the problem. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43947 Cc: stable@kernel.org Tested-by: Yang Guang <guang.a.yang@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: Pimped commit message by using the usual commit citation layout.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-03nouveau: initialise has_optimus variable.Dave Airlie1-1/+1
We should initialise this to 0 really to avoid getting false positives. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03sungem: Fix WakeOnLanGerard Lledo1-1/+1
WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5). gp->asleep_wol remains 0 and the machine never wakes up. Fixed by casting gp->wake_on_lan to bool. Tested on an iBook G4. Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-03usbnet: fix failure handling in usbnet_probetom.leiming@gmail.com1-1/+3
If register_netdev returns failure, the dev->interrupt and its transfer buffer should be released, so just fix it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-03usbnet: fix leak of transfer buffer of dev->interrupttom.leiming@gmail.com1-0/+1
The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-03ucc_geth: Add 16 bytes to max TX frame for VLANsJoakim Tjernlund1-3/+3
Creating a VLAN interface on top of ucc_geth adds 4 bytes to the frame and the HW controller is not prepared to TX a frame bigger than 1518 bytes which is 4 bytes too small for a full VLAN frame. Add 16 bytes which will handle the a simple VLAN and leaves 12 bytes for future expansion. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-03net: ucc_geth, increase no. of HW RX descriptorsJoakim Tjernlund1-1/+1
In a busy network we see ucc_geth is dropping RX pkgs every now and then. Increase the RX queues HW descriptors from 16 to 32 to deal with this. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-03Merge tag 'usb-3.4-rc6' of ↵Linus Torvalds1-181/+195
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here are two EHCI Tegra driver patches for your tree. The first is a bit big, but the majority is just moving code around. It is needed due to the other EHCI core changes that went in way back in 3.4-rc1, so this driver will now properly handle suspend/resume, as it was broken. The other one is a minor bugfix that resolves an warning that people have been seeing." * tag 'usb-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: ehci-tegra: remove redundant gpio_set_value EHCI: update PM methods in ehci-tegra.c
2012-05-03Merge tag 'tty-3.4-rc6' of ↵Linus Torvalds1-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull a TTY fix from Greg Kroah-Hartman: "This is a deadlock bugfix that was easy to hit, and that the vt layer lock rework got wrong, so it reverts the logic back to the way it was in 3.3 and earlier kernels to prevent problems." * tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Fix deadlock on scroll-lock
2012-05-02fixing dmi match for hp t5745 and hp st5747 thin clientMarc Gariepy1-2/+2
Match the correct information which is DMI_PRODUCT_NAME instead of DMI_BOARD_NAME See dmidecode information on launchpad for both thin client: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911920 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911916 Signed-off-by: Marc Gariepy <mgariepy@ubuntu.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-02drm/i915: Only enable IPS polling for gen5Chris Wilson2-5/+13
On SandyBridge IPS was entirely implemented in hardware and not reliant on the driver monitoring power consumption and feeding back desired run states, so the hardware is able to adapt quicker and more flexibly. Which is a huge relief for us as we no longer have to carry empirically derived magic algorithms. Yet despite the advance in technology, the driver was still doing its IPS polling on all machines. Restrict it to the only supported hardware, Clarkdale/Arrandale. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49025 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-02drm/i915: Do not read non-existent DPLL registers on PCH hardwareChris Wilson1-4/+5
We only execute intel_decrease_pllclock for pre-PCH hardware, typically gen4 mobiles. However, in the variable declaration we did read from the non-PCH DPLL register, quite naughty and detected by SandyBridge. Reported-and-tested-by: Andrey Rahmatullin <wrar@wrar.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49025 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-01Merge branch 'master' of ↵John W. Linville9-18/+81
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-05-01USB: ehci-tegra: remove redundant gpio_set_valueStephen Warren1-1/+0
The immediately preceding gpio_direction_output() already set the value, so there's no need to repeat it. This also prevents gpio_set_value() from WARNing when the GPIO is sleepable (e.g. is on an I2C expander); the set direction API is always sleepable, but plain set_value isn't. Cc: <stable@vger.kernel.org> # v3.3 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01EHCI: update PM methods in ehci-tegra.cAlan Stern1-180/+195
This patch (as1547) rearranges the Power Management parts of the ehci-tegra driver to match the conventions used in other EHCI platform drivers. In particular, the controller should not be powered down by the root hub's suspend routine; the controller's power level should be managed by the controller's own PM methods. The end result of the patch is that the standard ehci_bus_suspend() and ehci_bus_resume() methods can be used instead of special-purpose routines. The driver now uses the standard dev_pm_ops methods instead of legacy power management. Since there is no supported wakeup mechanism for the controller, runtime suspend is forbidden by default (this can be overridden via sysfs, if desired). These adjustments are needed in order to make ehci-tegra compatible with recent changes to the USB core. The core now checks the root hub's status following bus suspend; if the controller is automatically powered down during bus suspend then the check will fail and the root hub will be resumed immediately. Doing the controller power-down in a separate method avoids this problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01vt: Fix deadlock on scroll-lockAlan Cox1-7/+19
Fixing the locking accidentally replaced a race in the scroll lock handling with a deadlock. Turn it back into a race for now. The basic problem is that there are two paths into the tty stop/start helpers. One via the tty layer ^S/^Q handling where we need to take the kbd_event_lock and one via the special keyboard handler for fn_hold where we already hold it. Probably we need to split out into a separate LED lock but for now just go back to the race as it's a bit close to release. Reported-by: Clemens Ladisch <clemens@ladisch.de> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01sky2: fix receive length error in mixed non-VLAN/VLAN trafficstephen hemminger2-12/+17
Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by: Mirko Lindner <mlindner@marvell.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-01sky2: propogate rx hash when packet is copiedstephen hemminger1-0/+3
When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 11:10:57 +0300