Age | Commit message (Collapse) | Author | Files | Lines |
|
The zcomp_set_max_streams() is removed from commit 43209ea2d17a
("zram: remove max_comp_streams internals"), remove the declaration.
Link: https://lkml.kernel.org/r/20240223035548.2591882-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on arm64 with some adjustments.
Here wrap up crash dumping codes with CONFIG_CRASH_DUMP ifdeffery.
[bhe@redhat.com: fix building error in generic codes]
Link: https://lkml.kernel.org/r/20240129135033.157195-2-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-8-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, KEXEC_CORE select CRASH_CORE automatically because crash codes
need be built in to avoid compiling error when building kexec code even
though the crash dumping functionality is not enabled. E.g
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
After splitting out crashkernel reservation code and vmcoreinfo exporting
code, there's only crash related code left in kernel/crash_core.c. Now
move crash related codes from kexec_core.c to crash_core.c and only build it
in when CONFIG_CRASH_DUMP=y.
And also wrap up crash codes inside CONFIG_CRASH_DUMP ifdeffery scope,
or replace inappropriate CONFIG_KEXEC_CORE ifdef with CONFIG_CRASH_DUMP
ifdef in generic kernel files.
With these changes, crash_core codes are abstracted from kexec codes and
can be disabled at all if only kexec reboot feature is wanted.
Link: https://lkml.kernel.org/r/20240124051254.67105-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
prevents DAX from building on architectures with virtually aliased
dcache with:
depends on !(ARM || MIPS || SPARC)
This check is too broad (e.g. recent ARMv7 don't have virtually aliased
dcaches), and also misses many other architectures with virtually
aliased data cache.
This is a regression introduced in the v4.0 Linux kernel where the
dax mount option is removed for 32-bit ARMv7 boards which have no data
cache aliasing, and therefore should work fine with FS_DAX.
This was turned into the following check in alloc_dax() by a preparatory
change:
if (ops && (IS_ENABLED(CONFIG_ARM) ||
IS_ENABLED(CONFIG_MIPS) ||
IS_ENABLED(CONFIG_SPARC)))
return NULL;
Use cpu_dcache_is_aliasing() instead to figure out whether the environment
has aliasing data caches.
Link: https://lkml.kernel.org/r/20240215144633.96437-10-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace the following fs/Kconfig:FS_DAX dependency:
depends on !(ARM || MIPS || SPARC)
By a runtime check within alloc_dax(). This runtime check returns
ERR_PTR(-EOPNOTSUPP) if the @ops parameter is non-NULL (which means
the kernel is using an aliased mapping) on an architecture which
has data cache aliasing.
Change the return value from NULL to PTR_ERR(-EOPNOTSUPP) for
CONFIG_DAX=n for consistency.
This is done in preparation for using cpu_dcache_is_aliasing() in a
following change which will properly support architectures which detect
data cache aliasing at runtime.
Link: https://lkml.kernel.org/r/20240215144633.96437-8-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for checking whether the architecture has data cache
aliasing within alloc_dax(), modify the error handling of dcssblk
dcssblk_add_store() to handle alloc_dax() -EOPNOTSUPP failures.
Considering that s390 is not a data cache aliasing architecture,
and considering that DCSSBLK selects DAX, a return value of -EOPNOTSUPP
from alloc_dax() should make dcssblk_add_store() fail.
Link: https://lkml.kernel.org/r/20240215144633.96437-6-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for checking whether the architecture has data cache
aliasing within alloc_dax(), modify the error handling of dm alloc_dev()
to treat alloc_dax() -EOPNOTSUPP failure as non-fatal.
Link: https://lkml.kernel.org/r/20240215144633.96437-5-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for checking whether the architecture has data cache
aliasing within alloc_dax(), modify the error handling of nvdimm/pmem
pmem_attach_disk() to treat alloc_dax() -EOPNOTSUPP failure as non-fatal.
[ Based on commit "nvdimm/pmem: Fix leak on dax_add_host() failure". ]
Link: https://lkml.kernel.org/r/20240215144633.96437-4-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change the return value from NULL to PTR_ERR(-EOPNOTSUPP) for
CONFIG_DAX=n to be consistent with the fact that CONFIG_DAX=y
never returns NULL.
This is done in preparation for using cpu_dcache_is_aliasing() in a
following change which will properly support architectures which detect
data cache aliasing at runtime.
Link: https://lkml.kernel.org/r/20240215144633.96437-3-mathieu.desnoyers@efficios.com
Fixes: 4e4ced93794a ("dax: Move mandatory ->zero_page_range() check in alloc_dax()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix a leak on dax_add_host() error, where "goto out_cleanup_dax" is done
before setting pmem->dax_dev, which therefore issues the two following
calls on NULL pointers:
out_cleanup_dax:
kill_dax(pmem->dax_dev);
put_dax(pmem->dax_dev);
Link: https://lkml.kernel.org/r/20240208184913.484340-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20240208184913.484340-2-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently zram allocates 2 physically contiguous pages per-CPU's
compression stream (we may have up to 4 streams per-CPU). Since those
buffers are per-CPU we allocate them from CPU hotplug path, which may have
higher risks of failed allocations on devices with fragmented memory.
Switch to virtually contiguous allocations - crypto comp does not seem
impose requirements on compression working buffers to be physically
contiguous.
Link: https://lkml.kernel.org/r/20240213065400.6561-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some architectures, such as arm, have implemented optimized copy_page for
full page copying.
Replace the full page memcpy with copy_page to take advantage of the
optimization.
Link: https://lkml.kernel.org/r/20231007070554.8657-1-mark-pk.tsai@mediatek.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The argument is unused since commit 3d28ebceaffa ("x86/mm: Rework lazy
TLB to track the actual loaded mm"), delete it.
Link: https://lkml.kernel.org/r/20240126080644.1714297-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For each CPU hotplug event, we will update per-CPU data slice size and
corresponding PCP configuration for every online CPU to make the
implementation simple. But, Kyle reported that this takes tens seconds
during boot on a machine with 34 zones and 3840 CPUs.
So, in this patch, for each CPU hotplug event, we only update per-CPU data
slice size and corresponding PCP configuration for the CPUs that share
caches with the hotplugged CPU. With the patch, the system boot time
reduces 67 seconds on the machine.
Link: https://lkml.kernel.org/r/20240126081944.414520-1-ying.huang@intel.com
Fixes: 362d37a106dd ("mm, pcp: reduce lock contention for draining high-order pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Originally-by: Kyle Meyer <kyle.meyer@hpe.com>
Reported-and-tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a sysfs knob for dax devices to control the memmap_on_memory setting
if the dax device were to be hotplugged as system memory.
The default memmap_on_memory setting for dax devices originating via pmem
or hmem is set to 'false' - i.e. no memmap_on_memory semantics, to
preserve legacy behavior. For dax devices via CXL, the default is on.
The sysfs control allows the administrator to override the above defaults
if needed.
Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-5-20d16cb8d23d@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Huang, Ying <ying.huang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There were several places where drivers/dax/bus.c uses 'sprintf' to print
sysfs data. Since a sysfs_emit() helper is available specifically for
this purpose, replace all the sprintf() usage for sysfs with sysfs_emit()
in this file.
Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-2-20d16cb8d23d@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Add DAX ABI for memmap_on_memory", v7.
This series adds sysfs ABI to control memmap_on_memory behavior for DAX
devices.
Patch 1 replaces incorrect device_lock() usage with a local rwsem - this
was identified during review.
Patch 2 is also a preparatory patch that replaces sprintf() for sysfs
operations with sysfs_emit()
Patch 3 adds the missing documentation for the sysfs ABI for DAX regions
and Dax devices.
Patch 4 exports mhp_supports_memmap_on_memory().
Patch 5 adds the new ABI for toggling memmap_on_memory semantics for dax
devices.
This patch (of 5):
The dax driver incorrectly used driver-core device locks to protect
internal dax region and dax device configuration structures. Replace the
device lock usage with a local rwsem, one each for dax region
configuration and dax device configuration. As a result of this
conversion, no device_lock() usage remains in dax/bus.c.
Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-0-20d16cb8d23d@intel.com
Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-1-20d16cb8d23d@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MEM_PREPARE_ONLINE memory notifier makes memory block physical
accessible via sclp assign command. The notifier ensures self-contained
memory maps are accessible and hence enabling the "memmap on memory" on
s390.
MEM_FINISH_OFFLINE memory notifier shifts the memory block to an
inaccessible state via sclp unassign command.
Implementation considerations:
* When MHP_MEMMAP_ON_MEMORY is disabled, the system retains the old
behavior. This means the memory map is allocated from default memory.
* If MACHINE_HAS_EDAT1 is unavailable, MHP_MEMMAP_ON_MEMORY is
automatically disabled. This ensures that vmemmap pagetables do not
consume additional memory from the default memory allocator.
* The MEM_GOING_ONLINE notifier has been modified to perform no
operation, as MEM_PREPARE_ONLINE already executes the sclp assign
command.
* The MEM_CANCEL_ONLINE/MEM_OFFLINE notifier now performs no operation, as
MEM_FINISH_OFFLINE already executes the sclp unassign command.
Link: https://lkml.kernel.org/r/20240108132747.3238763-5-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove memory notifier types which are unhandled by s390. Unhandled
memory notifier types are covered by default case.
Link: https://lkml.kernel.org/r/20240108132747.3238763-4-sumanthk@linux.ibm.com
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "implement "memmap on memory" feature on s390".
This series provides "memmap on memory" support on s390 platform. "memmap
on memory" allows struct pages array to be allocated from the hotplugged
memory range instead of allocating it from main system memory.
s390 currently preallocates struct pages array for all potentially
possible memory, which ensures memory onlining always succeeds, but with
the cost of significant memory consumption from the available system
memory during boottime. In certain extreme configuration, this could lead
to ipl failure.
"memmap on memory" ensures struct pages array are populated from self
contained hotplugged memory range instead of depleting the available
system memory and this could eliminate ipl failure on s390 platform.
On other platforms, system might go OOM when the physically hotplugged
memory depletes the available memory before it is onlined. Hence, "memmap
on memory" feature was introduced as described in commit a08a2ae34613
("mm,memory_hotplug: allocate memmap from the added memory range").
Unlike other architectures, s390 memory blocks are not physically
accessible until it is online. To make it physically accessible two new
memory notifiers MEM_PREPARE_ONLINE / MEM_FINISH_OFFLINE are added and
this notifier lets the hypervisor inform that the memory should be made
physically accessible. This allows for "memmap on memory" initialization
during memory hotplug onlining phase, which is performed before calling
MEM_GOING_ONLINE notifier.
Patch 1 introduces MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers
to prepare the transition of memory to and from a physically accessible
state. New mhp_flag MHP_OFFLINE_INACCESSIBLE is introduced to ensure
altmap cannot be written when adding memory - before it is set online.
This enhancement is crucial for implementing the "memmap on memory"
feature for s390 in a subsequent patch.
Patches 2 allocates vmemmap pages from self-contained memory range for
s390. It allocates memory map (struct pages array) from the hotplugged
memory range, rather than using system memory by passing altmap to vmemmap
functions.
Patch 3 removes unhandled memory notifier types on s390.
Patch 4 implements MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers
on s390. MEM_PREPARE_ONLINE memory notifier makes memory block physical
accessible via sclp assign command. The notifier ensures self-contained
memory maps are accessible and hence enabling the "memmap on memory" on
s390. MEM_FINISH_OFFLINE memory notifier shifts the memory block to an
inaccessible state via sclp unassign command.
Patch 5 finally enables MHP_MEMMAP_ON_MEMORY on s390.
This patch (of 5):
Introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers to
prepare the transition of memory to and from a physically accessible
state. This enhancement is crucial for implementing the "memmap on
memory" feature for s390 in a subsequent patch.
Platforms such as x86 can support physical memory hotplug via ACPI. When
there is physical memory hotplug, ACPI event leads to the memory addition
with the following callchain:
acpi_memory_device_add()
-> acpi_memory_enable_device()
-> __add_memory()
After this, the hotplugged memory is physically accessible, and altmap
support prepared, before the "memmap on memory" initialization in
memory_block_online() is called.
On s390, memory hotplug works in a different way. The available hotplug
memory has to be defined upfront in the hypervisor, but it is made
physically accessible only when the user sets it online via sysfs,
currently in the MEM_GOING_ONLINE notifier. This is too late and "memmap
on memory" initialization is performed before calling MEM_GOING_ONLINE
notifier.
During the memory hotplug addition phase, altmap support is prepared and
during the memory onlining phase s390 requires memory to be physically
accessible and then subsequently initiate the "memmap on memory"
initialization process.
The memory provider will handle new MEM_PREPARE_ONLINE /
MEM_FINISH_OFFLINE notifications and make the memory accessible.
The mhp_flag MHP_OFFLINE_INACCESSIBLE is introduced and is relevant when
used along with MHP_MEMMAP_ON_MEMORY, because the altmap cannot be written
(e.g., poisoned) when adding memory -- before it is set online. This
allows for adding memory with an altmap that is not currently made
available by a hypervisor. When onlining that memory, the hypervisor can
be instructed to make that memory accessible via the new notifiers and the
onlining phase will not require any memory allocations, which is helpful
in low-memory situations.
All architectures ignore unknown memory notifiers. Therefore, the
introduction of these new notifiers does not result in any functional
modifications across architectures.
Link: https://lkml.kernel.org/r/20240108132747.3238763-1-sumanthk@linux.ibm.com
Link: https://lkml.kernel.org/r/20240108132747.3238763-2-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix GICv4.1 affinity update
- Restore a quirk for ACPI-based GICv4 systems
- Handle non-coherent GICv4 redistributors properly
- Prevent spurious interrupts on Broadcom devices using GIC v3
architecture
- Other minor fixes
* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
irqchip/irq-brcmstb-l2: Add write memory barrier before exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc"
* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix block process call transactions
i2c: pasemi: split driver into two separate modules
i2c: qcom-geni: Correct I2C TRE sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / miscdriver fixes from Greg KH:
"Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.
Included in here are:
- lots of iio driver fixes for reported issues
- nvmem device naming fixup for reported problem
- interconnect driver fixes for reported issues
All of these have been in linux-next for a while with no reported the
issues (the nvmem patch was included in a different branch in
linux-next before sent to me for inclusion here)"
* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
nvmem: include bit index in cell sysfs file name
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
interconnect: qcom: x1e80100: Add missing ACV enable_mask
interconnect: qcom: sm8650: Use correct ACV enable_mask
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
interconnect: qcom: sm8550: Enable sync_state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are three small tty and serial driver fixes for 6.8-rc5:
- revert a 8250_pci1xxxx off-by-one change that was incorrect
- two changes to fix the transmit path of the mxs-auart driver,
fixing a regression in the 6.2 release
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: mxs-auart: fix tx
serial: core: introduce uart_port_tx_flags()
serial: 8250_pci1xxxx: partially revert off by one patch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are two small fixes for 6.8-rc5:
- thunderbolt to fix a reported issue on many platforms
- dwc3 driver revert of a commit that caused problems in -rc1
Both of these changes have been in linux-next for over a week with no
reported issues"
* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: Support EBC feature of DWC_usb31"
thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- regression fix for rkisp1 shared IRQ logic
- fix atomisp breakage due to a kAPI change
- permission fix for remote controller BPF support
- memleak fix in ir_toy driver
- Kconfig dependency fix for pwm-ir-rx
* tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS
media: ir_toy: fix a memleak in irtoy_tx
media: rc: bpf attach/detach requires write permission
media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8
media: rkisp1: Fix IRQ handling due to shared interrupts
media: Revert "media: rkisp1: Drop IRQF_SHARED"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Keep bridges in D0 if we need to poll downstream devices for PME to
resolve a v6.6 regression where we failed to enumerate devices below
bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
Thunderbolt or USB4 docks (Alex Williamson)
- Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
PCI: Fix active state requirement in PME polling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes: the two fnic ones are a revert and a refix, which is why
the diffstat is a bit big. The target one also extracts a function to
add a check for configuration and so looks bigger than it is"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Move fnic_fnic_flush_tx() to a work queue
scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
scsi: target: Fix unmap setup during configuration
|
|
Pull block fixes from Jens Axboe:
"Just an nvme pull request via Keith:
- Fabrics connection error handling (Chaitanya)
- Use relaxed effects to reduce unnecessary queue freezes (Keith)"
* tag 'block-6.8-2024-02-16' of git://git.kernel.dk/linux:
nvmet: remove superfluous initialization
nvme: implement support for relaxed effects
nvme-fabrics: fix I/O connect error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"It's a little busier than normal, but it's still not a lot of code and
things seem fairly quiet in general:
- Fix allocation failure during SVE coredumps
- Fix handling of SVE context on signal delivery
- Enable Neoverse N2 CPU errata workarounds for Microsoft's "Azure
Cobalt 100" clone
- Work around CMN PMU erratum in AmpereOneX implementation
- Fix typo in CXL PMU event definition
- Fix jump label asm constraints"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Lower the maximum allocation for the SVE ptrace regset
arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata
perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child count)
arm64: jump_label: use constraints "Si" instead of "i"
arm64: fix typo in comments
perf: CXL: fix mismatched cpmu event opcode
arm64/signal: Don't assume that TIF_SVE means we saved SVE state
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, nothing too major, mostly amdgpu, then i915, xe,
msm and nouveau with some scattered bits elsewhere.
crtc:
- fix uninit variable
prime:
- support > 4GB page arrays
buddy:
- fix error handling in allocations
i915:
- fix blankscreen on JSL chromebooks
- stable fix to limit DP sst link rates
xe:
- Fix an out-of-bounds shift.
- Fix the display code thinking xe uses shmem
- Fix a warning about index out-of-bound
- Fix a clang-16 compilation warning
amdgpu:
- PSR fixes
- Suspend/resume fixes
- Link training fix
- Aspect ratio fix
- DCN 3.5 fixes
- VCN 4.x fix
- GFX 11 fix
- Misc display fixes
- Misc small fixes
amdkfd:
- Cache size reporting fix
- SIMD distribution fix
msm:
- GPU:
- dmabuf vmap fix
- a610 UBWC corruption fix (incorrect hbb)
- revert a commit that was making GPU recovery unreliable
- tlb invalidation fix
ivpu:
- suspend/resume fix
nouveau:
- fix scheduler cleanup path
- fix pointless scheduler creation
- fix kvalloc argument order
rockchip:
- vop2 locking fix"
* tag 'drm-fixes-2024-02-16' of git://anongit.freedesktop.org/drm/drm: (38 commits)
drm/amdgpu: Fix implicit assumtion in gfx11 debug flags
drm/amdkfd: update SIMD distribution algo for GFXIP 9.4.2 onwards
drm/amd/display: Increase ips2_eval delay for DCN35
drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()
drm/amdgpu/soc21: update VCN 4 max HEVC encoding resolution
drm/amd/display: fixed integer types and null check locations
drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
drm/amd/display: Preserve original aspect ratio in create stream
drm/amd/display: Fix possible NULL dereference on device remove/driver unload
Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
drm/amd/display: Add align done check
Revert "drm/amd: flush any delayed gfxoff on suspend entry"
drm/amd: Stop evicting resources on APUs in suspend
drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'
drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in 'calculate_bandwidth()'
drm/amd/display: Initialize 'wait_time_microsec' variable in link_dp_training_dpia.c
drm/amd/display: Fix && vs || typos
drm/amdkfd: Fix L2 cache size reporting in GFX9.4.3
drm/amdgpu: make damage clips support configurable
drm/msm: Wire up tlb ops
...
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.8-rc5
GPU:
- dmabuf vmap fix
- a610 UBWC corruption fix (incorrect hbb)
- revert a commit that was making GPU recovery unreliable
- tlb invalidation fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGszDSiw66+a=ttBr-hat+zrcBtfc_cZ4LQqXu89DJ0UeQ@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-02-15-2:
amdgpu:
- PSR fixes
- Suspend/resume fixes
- Link training fix
- Aspect ratio fix
- DCN 3.5 fixes
- VCN 4.x fix
- GFX 11 fix
- Misc display fixes
- Misc small fixes
amdkfd:
- Cache size reporting fix
- SIMD distribution fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215192452.11805-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix an out-of-bounds shift.
- Fix the display code thinking xe uses shmem
- Fix a warning about index out-of-bound
- Fix a clang-16 compilation warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zc4GpcrbFVqdK9Ws@fedora
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Fix for #10172: Blank screen on JSL Chromebooks. Stable fix to limit DP SST link rate to <=8.1Gbps.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zc37W27F5OvoeSkG@jlahtine-mobl.ger.corp.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A suspend/resume error fix for ivpu, a couple of scheduler fixes for
nouveau, a patch to support large page arrays in prime, a uninitialized
variable fix in crtc, a locking fix in rockchip/vop2 and a buddy
allocator error reporting fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4ffqzigtfh6cgzdpwuk6jlrv3dnk4hu6etiizgvibysqgtl2p@42n2gdfdd5eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fixes and simple cleanups:
- use a proper flexible array instead of a one-element array in order
to avoid array-bounds sanitizer errors
- add NULL pointer checks after allocating memory
- use memdup_array_user() instead of open-coding it
- fix a rare race condition in Xen event channel allocation code
- make struct bus_type instances const
- make kerneldoc inline comments match reality"
* tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: close evtchn after mapping cleanup
xen/gntalloc: Replace UAPI 1-element array
xen: balloon: make balloon_subsys const
xen: pcpu: make xen_pcpu_subsys const
xen/privcmd: Use memdup_array_user() in alloc_ioreq()
x86/xen: Add some null pointer checking to smp.c
xen/xenbus: document will_handle argument for xenbus_watch_path()
|
|
Gfx11 debug flags mask is currently set with an implicit assumption that
no other mqd update flags exist. This needs to be fixed with newly
introduced flag UPDATE_FLAG_IS_GWS by the previous patch.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In certain cooperative group dispatch scenarios the default SPI resource
allocation may cause reduced per-CU workgroup occupancy. Set
COMPUTE_RESOURCE_LIMITS.FORCE_SIMD_DIST=1 to mitigate soft hang
scenarions.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
New worst-case measurement observed at 1897us.
[How]
Increase to 2000us to cover the new worst case + margin.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dcn30_get_gamcor_current()
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the maximum resolution reported for HEVC encoding on VCN 4
devices to reflect its 8K encoding capability.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3159
Signed-off-by: Thong <thong.thai@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.
[How]
Preserve the original picture aspect ratio data during create the
stream.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|