summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-07-18block: make bdev_ops->rw_page() take a REQ_OP instead of boolTejun Heo4-28/+27
c11f0c0b5bb9 ("block/mm: make bdev_ops->rw_page() take a bool for read/write") replaced @op with boolean @is_write, which limited the amount of information going into ->rw_page() and more importantly page_endio(), which removed the need to expose block internals to mm. Unfortunately, we want to track discards separately and @is_write isn't enough information. This patch updates bdev_ops->rw_page() to take REQ_OP instead but leaves page_endio() to take bool @is_write. This allows the block part of operations to have enough information while not leaking it to mm. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18pktcdvd: remove assignment in if conditionRAGHU Halharvi1-23/+46
* Remove checkpatch errors caused due to assignment operation in if condition Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: assume that chunks are closed on 1.2 devicesHans Holmberg1-2/+3
We can't know if a block is closed or not on 1.2 devices, so assume closed state to make sure that blocks are erased before writing. Fixes: 32ef9412c114 ("lightnvm: pblk: implement get log report chunk") Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: add asynchronous partial readHeiner Litz2-63/+130
In the read path, partial reads are currently performed synchronously which affects performance for workloads that generate many partial reads. This patch adds an asynchronous partial read path as well as the required partial read ctx. Signed-off-by: Heiner Litz <hlitz@ucsc.edu> Reviewed-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: expose generic disk name on pr_* msgsMatias Bjørling9-138/+153
The error messages in pblk does not say which pblk instance that a message occurred from. Update each error message to reflect the instance it belongs to, and also prefix it with pblk, so we know the message comes from the pblk module. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: limit get chunk meta request sizeMatias Bjørling1-2/+8
For devices that does not specify a limit on its transfer size, the get_chk_meta command may send down a single I/O retrieving the full chunk metadata table. Resulting in large 2-4MB I/O requests. Instead, split up the I/Os to a maximum of 256KB and issue them separately to reduce memory requirements. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: fix read_bitmap for 32bit archsMatias Bjørling1-7/+7
If using pblk on a 32bit architecture, and there is a need to perform a partial read, the partial read bitmap will only have allocated 32 entries, where as 64 are needed. Make sure that the read_bitmap is initialized to 64bits on 32bit architectures as well. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Igor Konopko <igor.j.konopko@intel.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: Remove redundant rq->__data_len initializationBart Van Assche1-4/+2
Since both blk_old_get_request() and blk_mq_alloc_request() initialize rq->__data_len to zero, it is not necessary to initialize that member in nvme_nvm_alloc_request(). Hence remove the rq->__data_len initialization from nvme_nvm_alloc_request(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: enable line minor version detectionMatias Bjørling1-2/+3
When recovering a line, an extra check was added when debugging was active, such that minor version where also checked. Unfortunately, this used the ifdef NVM_DEBUG, which is not correct. Instead use the proper DEBUG def, and now that it compiles, also fix the variable. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Fixes: d0ab0b1ab991f ("lightnvm: pblk: check data lines version on recovery") Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: move NVM_DEBUG to pblkMatias Bjørling10-70/+72
There is no users of CONFIG_NVM_DEBUG in the LightNVM subsystem. All users are in pblk. Rename NVM_DEBUG to NVM_PBLK_DEBUG and enable only for pblk. Also fix up the CONFIG_NVM_PBLK entry to follow the code style for Kconfig files. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: handle case when mw_cunits equals to 0Marcin Dziegielewski2-7/+5
Some devices can expose mw_cunits equal to 0, it can cause the creation of too small write buffer and cause performance to drop on write workloads. Additionally, write buffer size must cover write data requirements, such as WS_MIN and MW_CUNITS - it must be greater than or equal to the larger one multiplied by the number of PUs. However, for performance reasons, use the WS_OPT value to calculation instead of WS_MIN. Because the place where buffer size is calculated was changed, this patch also removes pgs_in_buffer filed in pblk structure. Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13block: skd: Use %pad printk format for dma_addr_t valuesHelge Deller1-8/+8
Use the existing %pad printk format to print dma_addr_t values. This avoids the following warnings when compiling on the parisc64 platform: drivers/block/skd_main.c: In function 'skd_preop_sg_list': drivers/block/skd_main.c:660:4: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 6 has type 'dma_addr_t {aka unsigned int}' [-Wformat=] Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block/DAC960.c: fix defined but not used build warningsRandy Dunlap1-3/+6
Fix build warnings in DAC960.c when CONFIG_PROC_FS is not enabled by marking the unused functions as __maybe_unused. ../drivers/block/DAC960.c:6429:12: warning: 'dac960_proc_show' defined but not used [-Wunused-function] ../drivers/block/DAC960.c:6449:12: warning: 'dac960_initial_status_proc_show' defined but not used [-Wunused-function] ../drivers/block/DAC960.c:6456:12: warning: 'dac960_current_status_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09null_blk: add zone supportMatias Bjørling4-3/+227
Adds support for exposing a null_blk device through the zone device interface. The interface is managed with the parameters zoned and zone_size. If zoned is set, the null_blk instance registers as a zoned block device. The zone_size parameter defines how big each zone will be. Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09null_blk: move shared definitions to header fileMatias Bjørling2-75/+81
Split the null_blk device driver, such that it can prepare for zoned block interface support. Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09null_blk: remove NULLB_DEV_FL_CONFIGURED on turning off nullb deviceLiu Bo1-0/+1
Currently mbps knob could only be set once before switching power knob to on, after power knob has been set at least once, there is no way to set mbps knob again due to -EBUSY. As nullb is mainly used for testing, in order to make it flexible, this removes the flag NULLB_DEV_FL_CONFIGURED so that mbps knob can be reset when power knob is off, e.g. echo 0 > /config/nullb/a/power echo 40 > /config/nullb/a/mbps echo 1 > /config/nullb/a/power So does other knobs under /config/nullb/a. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block/loop: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09drbd: mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used in this case: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09paride: remove redundant variable nColin Ian King1-2/+1
Variable n is being assigned but is never used hence it is redundant and can be removed. Also put spacing between variables in declaration to clean up checkpatch warnings. Cleans up clang warning: warning: variable 'n' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09loop: remove redundant pointer inodeColin Ian King1-2/+0
Pointer inode is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'inode' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block/floppy: remove redundant variable dflagsColin Ian King1-3/+0
Variable dflags is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'dflags' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09drbd: Do not redefine __must_hold()Bart Van Assche1-2/+0
Since __must_hold() is defined in <linux/compiler_types.h>, do not redefine it in DRBD. Compile-tested only. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small collection of fixes, sort of the usual at this point, all for i.MX or OMAP: - Enable ULPI drivers on i.MX to avoid a hang - Pinctrl fix for touchscreen on i.MX51 ZII RDU1 - Fixes for ethernet clock references on am3517 - mmc0 write protect detection fix for am335x - kzalloc->kcalloc conversion in an OMAP driver - USB metastability fix for USB on dra7 - Fix touchscreen wakeup on am437x" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx_v4_v5_defconfig: Select ULPI support ARM: imx_v6_v7_defconfig: Select ULPI support ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl ARM: dts: am437x: make edt-ft5x06 a wakeup source
2018-07-08Merge tag 'pci-v4.18-fixes-2' of ↵Linus Torvalds10-12/+41
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a use-after-free in the endpoint code (Dan Carpenter) - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven) - Fix an nfp regression caused by a change in how we limit the number of VFs we can enable (Jakub Kicinski) - Fix failure path cleanup issues in the new R-Car gen3 PHY support (Marek Vasut) - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc Guire) * tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: nfp: stop limiting VFs to 0 PCI/IOV: Reset total_VFs limit after detaching PF driver PCI: faraday: Add missing of_node_put() PCI: xilinx-nwl: Add missing of_node_put() PCI: xilinx: Add missing of_node_put() PCI: endpoint: Use after free in pci_epf_unregister_driver() PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCI: rcar: Clean up PHY init on failure PCI: rcar: Shut the PHY down in failpath
2018-07-08Merge tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-17/+46
Pull dma-mapping fix from Christoph Hellwig: "Revert an incorrect dma-mapping commit for 4.18-rc" * tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping: Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
2018-07-08Merge tag 'dmaengine-fix-4.18-rc4' of ↵Linus Torvalds3-3/+7
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "We have few odd driver fixes and one email update change for you this time: - Driver fixes for k3dma (off by one), pl330 (burst residue granularity) and omap-dma (incorrect residue_granularity) - Sinan's email update" * tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate() dmaengine: pl330: report BURST residue granularity MAINTAINERS: Update email-id of Sinan Kaya dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
2018-07-08Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds2-23/+14
Pull IPMI fixes from Corey Minyard: "A couple of small fixes: one to the BMC side of things that fixes an interrupt issue, and one oops fix if init fails in a certain way on the client driver" * tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc: fix IRQ exception if the channel is not open ipmi: Cleanup oops on initialization failure
2018-07-07Merge tag 'scsi-fixes' of ↵Linus Torvalds3-15/+57
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two minor bug fixes (aacraid, target) and a fix for a potential exploit in the way sg handles teardown" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: mitigate read/write abuse scsi: aacraid: Fix PD performance regression over incorrect qd being set scsi: target: Fix truncated PR-in ReadKeys response
2018-07-07Merge tag 'for-linus-20180706' of git://git.kernel.dk/linux-blockLinus Torvalds2-1/+2
Pull block fixes from Jens Axboe: "Two minor fixes for this series: - add LOOP_SET_BLOCK_SIZE as compat ioctl (Evan Green) - drbd use-after-free fix (Lars Ellenberg)" * tag 'for-linus-20180706' of git://git.kernel.dk/linux-block: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl drbd: fix access after free
2018-07-06Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-27/+18
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "The usual collection of driver fixlets: - build cleanup/fix for the sunxi makefile that tried to save size but failed and prevented dead code elimination from working - two Davinci clk driver fixes for a typo causing build failures in different configurations and an error check that checks the wrong variable. - undo the DT ABI breaking imx6ul binding header shuffle that got merged this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: dt-bindings: clock: imx6ul: Do not change the clock definition order clk: davinci: fix a typo (which leads to build failures) clk: davinci: cfgchip: testing the wrong variable clk: sunxi-ng: replace lib-y with obj-y
2018-07-06Merge tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds2-11/+17
Pull VFIO fixes from Alex Williamson: - Make vfio-pci IGD extensions optional via Kconfig (Alex Williamson) - Remove unused and soon to be removed map_atomic callback from mbochs sample driver, add unmap callback to avoid dmabuf leaks (Gerd Hoffmann) - Fix usage of get_user_pages_longterm() (Jason Gunthorpe) - Fix sample mbochs driver vm_operations_struct.fault return type (Souptick Joarder) * tag 'vfio-v4.18-rc4' of git://github.com/awilliam/linux-vfio: sample/vfio-mdev: Change return type to vm_fault_t vfio: Use get_user_pages_longterm correctly sample/mdev/mbochs: add mbochs_kunmap_dmabuf sample/mdev/mbochs: remove mbochs_kmap_atomic_dmabuf vfio/pci: Make IGD support a configurable option
2018-07-06Merge branch 'for-linus' of ↵Linus Torvalds2-10/+11
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A few more changes for v4.18: - wire up the two new system calls io_pgetevents and rseq - fix a register corruption in the expolines code for machines without EXRL - drastically reduce the memory utilization of the dasd driver - fix reference counting for KVM page table pages" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up rseq system call s390: wire up io_pgetevents system call s390/mm: fix refcount usage for 4K pgste s390/dasd: reduce the default queue depth and nr of hardware queues s390: Correct register corruption in critical section cleanup
2018-07-06Merge tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds34-242/+583
Pull drm fixes from Dave Airlie: "This is the drm fixes for rc4. It's a bit larger than I'd like but the exynos cleanups are pretty mechanical, and I'd rather have them in sooner rather than later so we can avoid too much conflicts around them. The non-mechanincal exynos changes are mostly fixes for new feature recently introduced. Apart from the exynos updates, we have: i915: - GVT and GGTT mapping fixes amdgpu: - fix HDMI2.0 4K@60 Hz regression - Hotplug fixes for dual-GPU laptops to make power management better - misc vega12 bios fixes, a race fix and some typos. sii8620 bridge: - small fixes around mode setting core: - use kvzalloc to allocate blob property memory" * tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: add a check for display depth validity drm/amd/display: adding ycbcr420 pixel encoding for hdmi drm/udl: fix display corruption of the last line drm/bridge/sii8620: Fix link mode selection drm/bridge/sii8620: Fix display of packed pixel modes drm/bridge/sii8620: Send AVI infoframe in all MHL versions drm/amdgpu: fix user fence write race condition drm/i915: Try GGTT mmapping whole object as partial drm/amdgpu/pm: fix display count in non-DC path drm/amdgpu: fix swapped emit_ib_size in vce3 drm: Use kvzalloc for allocating blob property memory drm/i915/gvt: changed DDI mode emulation type drm/i915/gvt: fix a bug of partially write ggtt enties drm/exynos: Replace drm_dev_unref with drm_dev_put drm/exynos: Replace drm_gem_object_unreference_unlocked with put function drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions drm/exynos: ipp: use correct enum type drm/exynos: decon5433: Fix WINCONx reset value drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes drm/exynos: fimc: Use real buffer width for configuring the hardware ...
2018-07-06Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of ↵Dave Airlie11-102/+149
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fixups - Fix several problems to IPPv2 merged to mainline recentely. . An align problem of width size that IPP driver incorrectly calculated the real buffer size. . Horizontal and vertical flip problem. . Per-plane global alpha for XRGB modes. . Incorrect variant of the YUV modes. - Fix plane overlapping problem. . The stange order of overlapping planes on XRGB modes by setting global alpha value to maximum value. Cleanup - Rename a enum type, drm_ipp_size_id, to one specific to Exynos, drm_exynos_ipp_limit_type. - Replace {un/reference} with {put,get} functions. . it replaces several reference/unreference functions with Linux kernel nameing standard. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530512041-21392-1-git-send-email-inki.dae@samsung.com
2018-07-06Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie14-86/+284
into drm-fixes - Fix an HDMI 2.0 4k@60 regression - Hotplug fixes for PX/HG laptops - Fixes for vbios changes in vega12 - Fix a race in the user fence code - Fix a couple of misc typos Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705155206.2752-1-alexander.deucher@amd.com
2018-07-06Merge tag 'drm-intel-fixes-2018-07-05' of ↵Dave Airlie5-15/+81
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes A couple of GVT fixes, and a GGTT mmapping fix. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/8736wxq35t.fsf@intel.com
2018-07-06Merge tag 'drm-misc-fixes-2018-07-05' of ↵Dave Airlie2-34/+58
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc4: - A few small fixes for the sii8620 bridge. - Allocate blob property memory using kvzalloc instead of kmalloc. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/4267636e-bb7c-8f69-eeff-12e045b3e7e1@linux.intel.com
2018-07-06Merge tag 'omap-for-v4.18/fixes-signed' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap for v4.18-rc cycle Few dts fixes for regressions for various SoCs and devices for touchscreen wake, dra7 USB quirk, pinmux for beaglebone mmc, and emac clock. Also included is a change for ti-sysc to use kcalloc that Kees wanted to get into v4.18 as that's the last one he wanted to fix for improved defense against allocation overflows. * tag 'omap-for-v4.18/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: am437x: make edt-ft5x06 a wakeup source Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-05Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up ↵Christoph Hellwig2-17/+46
intel_{alloc,free}_coherent()" This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Fabio Coatti <fabio.coatti@gmail.com> Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
2018-07-05Merge tag 'acpi-4.18-rc4' of ↵Linus Torvalds3-9/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent ACPICA regression, fix a battery driver regression introduced during the 4.17 cycle and fix up the recently added support for the PPTT ACPI table. Specifics: - Revert part of a recent ACPICA regression fix that added leading newlines to ACPICA error messages and made the kernel log look broken (Rafael Wysocki). - Fix an ACPI battery driver regression introduced during the 4.17 cycle due to incorrect error handling that made Thinkpad 13 laptops crash on boot (Jouke Witteveen). - Fix up the recently added PPTT ACPI table support by covering the case when a PPTT structure represents a processors group correctly (Sudeep Holla)" * tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Safe unregistering of hooks ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set ACPICA: Drop leading newlines from error messages
2018-07-05Merge tag 'pm-4.18-rc4' of ↵Linus Torvalds2-7/+21
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a PCI power management regression introduced during the 4.17 cycle and fix up the recently added support for devices in multiple power domains. Specifics: - Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3) to avoid confusing the platform firmware which started to happen after a core power management regression fix that went in during the 4.17 cycle (Rafael Wysocki). - Fix up the recently added support for devices in multiple power domains by avoiding to power up the entire domain unnecessarily when attaching a device to it (Ulf Hansson)" * tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Don't power on at attach for the multi PM domain case PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05drm/amd/display: add a check for display depth validityMikita Lipski1-0/+42
[why] HDMI 2.0 fails to validate 4K@60 timing with 10 bpc [how] Adding a helper function that would verify if the display depth assigned would pass a bandwidth validation. Drop the display depth by one level till calculated pixel clk is lower than maximum TMDS clk. Bugzilla: https://bugs.freedesktop.org/106959 Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: adding ycbcr420 pixel encoding for hdmiMikita Lipski1-2/+5
[why] HDMI EDID's VSDB contains spectial timings for specifically YCbCr 4:2:0 colour space. In those cases we need to verify if the mode provided is one of the special ones has to use YCbCr 4:2:0 pixel encoding for display info. [how] Verify if the mode is using specific ycbcr420 colour space with the help of DRM helper function and assign the mode to use ycbcr420 pixel encoding. Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05Merge branches 'acpi-tables' and 'acpica'Rafael J. Wysocki2-5/+11
Merge ACPICA regression fix and a fix for the recently added PPTT support. * acpi-tables: ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set * acpica: ACPICA: Drop leading newlines from error messages
2018-07-05Merge branch 'pm-pci'Rafael J. Wysocki1-0/+12
Merge a PCI power management regression fix. * pm-pci: PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05drm/udl: fix display corruption of the last lineMikulas Patocka2-5/+11
The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-04drm/bridge/sii8620: Fix link mode selectionMaciej Purski1-10/+20
Current link mode values do not allow to enable packed pixel modes. Select packed pixel clock mode, if needed, every time the link mode register gets updated. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Fix display of packed pixel modesMaciej Purski1-1/+16
Current implementation does not guarantee packed pixel modes working with every dongle. There are some dongles, which require selecting the output mode explicitly. Write proper values to registers in packed_pixel mode, based on how it is done in vendor's code. Select output color space: RGB (no packed pixel) or YCBCR422 (packed pixel). This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8 ("drm/bridge/sii8620: fix display of packed pixel modes in MHL2"). Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Send AVI infoframe in all MHL versionsMaciej Purski1-20/+19
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles need AVI infoframe to work correctly in either packed pixel mode or non-packed pixel mode. Send AVI infoframe in set_infoframes() in every case. Create an infoframe using drm_hdmi_infoframe_from_display_mode() instead of manually filling each infoframe structure's field. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 13:37:54 +0300