Age | Commit message (Collapse) | Author | Files | Lines |
|
The ST7701 initialization sequence is well parametrized, split the GIP
programming sequence, which is fully custom completely undocumented
TFT matrix specific magic register programming sequence into separate
callback so other TFT matrix definitions can add their own GIP sequence.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-9-marex@denx.de
|
|
Instead of hard-coding TFT matrix voltage and timing settings, which can
even lead to permanent TFT matrix damage, parametrize them in TFT matrix
descriptor.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-8-marex@denx.de
|
|
The horizontal pixel count is a property of the TFT matrix. Currently the
driver hard-codes content of this register to specific value which is
only compatible with one TFT matrix, likely the TS8550B one.
Calculate the horizontal pixel count from the mode instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-7-marex@denx.de
|
|
Define DSI_CMD2_BK0_PORCTRL_VBP_MASK and DSI_CMD2_BK0_PORCTRL_VFP_MASK
and move the vertical back and front porch calculation from macros into
the st7701_init_sequence() function, so it is clear what this does.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-6-marex@denx.de
|
|
The vertical line count is a property of the TFT matrix. Currently the
driver hard-codes content of this register to specific value which is
only compatible with one TFT matrix, likely the TS8550B one.
Calculate the vertical line count from the mode instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-5-marex@denx.de
|
|
The gamma correction values are specific to the TFT which is attached to
the ST7701 TFT matrix driver, move the gamma correction values from what
incorrectly looks like common init sequence into TFT matrix specific
settings.
While doing so, add macros which defined fields within the gamma register
file and a macro which mimics FIELD_PREP except works with constant
expressions.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-4-marex@denx.de
|
|
The ST7701 and ST7701S all have two voltage supplies, one for internal
logic and one for the TFT matrix driver. The supplies are not property
of the TFT matrix driver, so move them to common ST7701 code.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-3-marex@denx.de
|
|
clock
The ST7701(S) is capable of DSI burst mode, which is more energy
efficient than the non-burst modes. Make use of it.
The ST7701(S) is capable of DSI non-continuous clock, since it
sources the TFT matrix driver clock from internal clock source.
The DSI non-continuous clock further reduce power utilization.
The ST7701(S) uses DSI LPM for command transmissions, make sure
this is configured correctly in the DSI mode flags.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-2-marex@denx.de
|
|
The ST7701 and ST7701S are TFT matrix drivers with integrated multi
protocol decoder capable of DSI/DPI/SPI input and 480x360...864 line
TFT matrix output. Currently the only supported input is DSI.
The protocol decoder is separate from the TFT matrix driver and is
always capable of handling all of DSI non-burst mode with sync pulses
or sync events as well as DSI burst mode.
Move the DSI mode configuration from TFT matrix driver properties to
common ST7701 code, because this is common to all TFT matrices.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-1-marex@denx.de
|
|
there is a repeated word "in", so remove it.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718150418.7321-1-dengshaomin@cdjrlc.com
|
|
remove the rebundant word "the" from comments.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718151154.9628-1-dengshaomin@cdjrlc.com
|
|
there is a repeated word "or" in comments, so remove it.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718145536.4866-1-dengshaomin@cdjrlc.com
|
|
Speed up video clock calculation and remove redundant video debug message.
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-4-allen.chen@ite.com.tw
|
|
Use i2c bus to read/write when it6505 power off will occur i2c error.
Add this check will prevent i2c error when it6505 power off.
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-3-allen.chen@ite.com.tw
|
|
Change power sequence to meet it6505 data sheet requirement when boot on.
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-2-allen.chen@ite.com.tw
|
|
Send DPCD DP_SET_POWER_D0 command to the monitor in .atomic_enable
callback. Without this command, some monitors won't show up again after
changing the resolution.
Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Reviewed-by: Allen Chen <allen.chen@ite.com.tw>
Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714173715.v2.1.I85af54e9ceda74ec69f661852825845f983fc343@changeid
|
|
Data writes for the ssd130x 4-wire SPI protocol need special handling, due
the Data/Command control (D/C) pin having to be toggled prior to the write.
The regmap API only allowed drivers to provide .reg_{read,write} callbacks
to do per register read/write, but didn't provide a way for drivers to do
the same for bulk read/writes.
For this reason, a custom regmap bus was used by the driver just to define
a bulk write callback that implements the D/C pin toggling. But the regmap
API has been extended to support defining bulk read/write handlers, so the
custom regmap bus is not needed anymore and could just be dropped.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220618174338.2253021-1-javierm@redhat.com
|
|
- Fix comments using wrong style
- Drop repeated word
This fixes all checkpatch complains and makes the file a little
bit easier to read - as the eye is not distracted by the style
violations.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-14-sam@ravnborg.org
|
|
The macros for texture 1 setting all used continuation on a new line,
resulting in a highly ureadable definition.
Merge the lines so they are each on a single line.
As a nice side-effect this fixes a number of checkpatch warnings:
"WARNING: please, no spaces at the start of a line".
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-13-sam@ravnborg.org
|
|
The license for the via_3d_reg header is MIT - so use the
shorter SPDX tag to identify the license.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-12-sam@ravnborg.org
|
|
Updated the 3d_reg header file to match what is used by the openchrome
driver.
This verifies that the two drivers can use the same header file.
The file is a verbatim copy from the openchrome repo - a few style
issues will be fixed in following commits.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-11-sam@ravnborg.org
|
|
With this change the driver is now a signle file driver.
The only remaning heder file describes the HW and can be shared with the
new openchrome driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-10-sam@ravnborg.org
|
|
Embed the header file in via_drv.h and the code in via_dri1.
All functions are made static as there are no more external users.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-9-sam@ravnborg.org
|
|
Embed some of the header file in via_drv.h and
the rest in via_dri1.c
While embedding deleted extra empty lines and functions that
has no external users are made static.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-8-sam@ravnborg.org
|
|
All functions are made static as there are no more external users.
The file had new copyrights that are kept.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-7-sam@ravnborg.org
|
|
All functions are made static as there are no more external users.
The file had a new copyright that is kept.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-6-sam@ravnborg.org
|
|
All functions was made static as there are no external users.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-5-sam@ravnborg.org
|
|
A few functions has no external use and are made static.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-4-sam@ravnborg.org
|
|
Moved the copyright notices so all copyrights are kept.
A few variables was made static as there are no more users outside this
file.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-3-sam@ravnborg.org
|
|
The via driver implements the DRI1 interface, and we have a new
implementation of the via driver coming that supports atomic
modesetting.
It is not acceptable just to replace the existing driver so
this is first step to make it a single-file implementation allowing
it to stay without interfering with the new driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713170202.1798216-2-sam@ravnborg.org
|
|
clang static analysis reports
drivers/gpu/drm/nouveau/nvkm/subdev/bios/pmu.c:68:17: warning: The right operand of '*' is a garbage value [core.UndefinedBinaryOperatorResult]
switch (!!data * *ver) {
^ ~~~~
A switch statement with only a default should be reduced to an if.
If nvbios_pmuEp() returns 0, via the data variable, the output info parameter
is not used. So set info only when data is not 0.
The struct nvbios_pmuE only has the type and data elements. Since both of these
are explicitly set, memset is not needed. So remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220702153904.1696595-1-trix@redhat.com
|
|
This re-applys commit 708d19d9f362766147cab79eccae60912c6d3068.
The original problem this was reverted for was found and the correct fix
will be merged to drm-misc-next-fixes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714132315.587217-2-christian.koenig@amd.com
|
|
This re-applys commit 5e3f1e7729ec7a99e145e9d8ed58963d86cdfb98.
The original problem this was reverted for was found and the correct fix
will be merged to drm-misc-next-fixes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714132315.587217-1-christian.koenig@amd.com
|
|
There are some struct drm_driver fields that are required by drivers since
drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.
But it can be possible that a driver has a bug and did not set some of the
fields, which leads to drm_copy_field() attempting to copy a NULL pointer:
[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[ +0.010955] Mem abort info:
[ +0.002835] ESR = 0x0000000096000004
[ +0.003872] EC = 0x25: DABT (current EL), IL = 32 bits
[ +0.005395] SET = 0, FnV = 0
[ +0.003113] EA = 0, S1PTW = 0
[ +0.003182] FSC = 0x04: level 0 translation fault
[ +0.004964] Data abort info:
[ +0.002919] ISV = 0, ISS = 0x00000004
[ +0.003886] CM = 0, WnR = 0
[ +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[ +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[ +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ +0.007061] pc : __pi_strlen+0x14/0x150
[ +0.003895] lr : drm_copy_field+0x30/0x1a4
[ +0.004156] sp : ffff8000094b3a50
[ +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[ +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[ +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[ +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[ +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[ +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[ +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[ +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[ +0.007240] Call trace:
[ +0.002475] __pi_strlen+0x14/0x150
[ +0.003537] drm_version+0x84/0xac
[ +0.003448] drm_ioctl_kernel+0xa8/0x16c
[ +0.003975] drm_ioctl+0x270/0x580
[ +0.003448] __arm64_sys_ioctl+0xb8/0xfc
[ +0.003978] invoke_syscall+0x78/0x100
[ +0.003799] el0_svc_common.constprop.0+0x4c/0xf4
[ +0.004767] do_el0_svc+0x38/0x4c
[ +0.003357] el0_svc+0x34/0x100
[ +0.003185] el0t_64_sync_handler+0x11c/0x150
[ +0.004418] el0t_64_sync+0x190/0x194
[ +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[ +0.006180] ---[ end trace 0000000000000000 ]---
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-3-javierm@redhat.com
|
|
The strlen() function returns a size_t which is an unsigned int on 32-bit
arches and an unsigned long on 64-bit arches. But in the drm_copy_field()
function, the strlen() return value is assigned to an 'int len' variable.
Later, the len variable is passed as copy_from_user() third argument that
is an unsigned long parameter as well.
In theory, this can lead to an integer overflow via type conversion. Since
the assignment happens to a signed int lvalue instead of a size_t lvalue.
In practice though, that's unlikely since the values copied are set by DRM
drivers and not controlled by userspace. But using a size_t for len is the
correct thing to do anyways.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-2-javierm@redhat.com
|
|
devm_pm_runtime_enable() simplifies the driver a bit since it will call
pm_runtime_disable() automatically through a device-managed action.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-70-maxime@cerno.tech
|
|
At bind time, vc4_v3d_bind() will read a register to retrieve the v3d
version and make sure it's a version we're compatible with.
However, the v3d has an optional clock that is enabled only after the
register read-out and a power domain that wasn't enabled at all in the bind
implementation. This was working fine at boot because both were enabled,
but resulted in the version check failing if we were unbinding and
rebinding the driver because the unbinding would have turned them off.
The fix isn't as easy as calling pm_runtime_resume_and_get() prior to the
register access to power up the power domain though.
Indeed, the runtime_resume implementation will enable the clock mentioned
above, call vc4_v3d_init_hw() and then vc4_irq_enable().
Prior to the previous patch, vc4_irq_enable() needed to occur after our
call to platform_get_irq() and vc4_irq_install(), since vc4_irq_enable()
used to call enable_irq() and vc4_irq_install() will call request_irq().
vc4_irq_install() will also do some register access, so needs the power
domain to be on. So we ended up in a situation where
vc4_v3d_runtime_resume() needed vc4_irq_install() to have been called
before, and vc4_irq_install() needed vc4_v3d_runtime_resume().
The previous patch removed the enable_irq() call in vc4_irq_enable() and
thus removed the dependency of vc4_v3d_runtime_resume() on
vc4_irq_install().
Thus, we can now rework our bind implementation to call
pm_runtime_resume_and_get() before our register access to make sure the
power domain is on. vc4_v3d_runtime_resume() also takes care of turning the
clock on and calling vc4_v3d_init_hw() so we can remove them from bind.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-69-maxime@cerno.tech
|
|
The vc4_irq_disable(), among other things, will call disable_irq() to
complete any in-flight interrupts.
This requires its counterpart, vc4_irq_enable(), to call enable_irq() which
causes issues addressed in a later patch.
However, vc4_irq_disable() is called by two callees: vc4_irq_uninstall()
and vc4_v3d_runtime_suspend().
vc4_irq_uninstall() also calls free_irq() which already disables the
interrupt line. We thus don't require an explicit disable_irq() for that
call site.
vc4_v3d_runtime_suspend() doesn't have any other code. However, the rest of
vc4_irq_disable() masks the interrupts coming from the v3d, so explictly
disabling the interrupt line is also redundant.
The only thing we really care about is thus to make sure we don't have any
handler in-flight, as suggested by the comment. We can thus replace
disable_irq() by synchronize_irq().
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-68-maxime@cerno.tech
|
|
vc4_perfmon_open_file() will instantiate a mutex for that file instance,
but we never call mutex_destroy () in vc4_perfmon_close_file().
Let's add that missing call.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-67-maxime@cerno.tech
|
|
mutex_init is supposed to be balanced by a call to mutex_destroy that we
were never doing in the vc4 driver.
Since a DRM-managed mutex_init variant has been introduced, let's just
switch to it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-66-maxime@cerno.tech
|
|
The vc4 has a custom API to allow components to register a debugfs file
before the DRM driver has been registered and the debugfs_init hook has
been called.
However, the .late_register hook allows to have the debugfs file creation
deferred after that time already.
Let's remove our custom code to only register later our debugfs entries as
part of either debugfs_init or after it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-65-maxime@cerno.tech
|
|
vc4_debugfs_add_file() can fail, so let's propagate its error code instead
of silencing it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-64-maxime@cerno.tech
|
|
Our current code now mixes some resources whose lifetime are tied to the
device (clocks, IO mappings, etc.) and some that are tied to the DRM device
(encoder, bridge).
The device one will be freed at unbind time, but the DRM one will only be
freed when the last user of the DRM device closes its file handle.
So we end up with a time window during which we can call the encoder hooks,
but we don't have access to the underlying resources and device.
Let's protect all those sections with drm_dev_enter() and drm_dev_exit() so
that we bail out if we are during that window.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-63-maxime@cerno.tech
|
|
devm_pm_runtime_enable() simplifies the driver a bit since it will call
pm_runtime_disable() automatically through a device-managed action.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-62-maxime@cerno.tech
|
|
Whenever the device and driver are unbound, the main device and all the
subdevices will be removed by calling their unbind() method.
However, the DRM device itself will only be freed when the last user will
have closed it.
It means that there is a time window where the device and its resources
aren't there anymore, but the userspace can still call into our driver.
Fortunately, the DRM framework provides the drm_dev_enter() and
drm_dev_exit() functions to make sure our underlying device is still there
for the section protected by those calls. Let's add them to the VEC driver.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-61-maxime@cerno.tech
|
|
The current code will call drm_connector_unregister() and
drm_connector_cleanup() when the device is unbound. However, by then, there
might still be some references held to that connector, including by the
userspace that might still have the DRM device open.
Let's switch to a DRM-managed initialization to clean up after ourselves
only once the DRM device has been last closed.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-60-maxime@cerno.tech
|
|
The current code will call drm_encoder_cleanup() when the device is
unbound. However, by then, there might still be some references held to
that encoder, including by the userspace that might still have the DRM
device open.
Let's switch to a DRM-managed initialization to clean up after ourselves
only once the DRM device has been last closed.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-59-maxime@cerno.tech
|
|
drm_connector_unregister() is only to be used for connectors that have been
registered through drm_connector_register() after drm_dev_register() has
been called. This is our case here so let's remove the call.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-58-maxime@cerno.tech
|
|
Our internal structure that stores the DRM entities structure is allocated
through a device-managed kzalloc.
This means that this will eventually be freed whenever the device is
removed. In our case, the most likely source of removal is that the main
device is going to be unbound, and component_unbind_all() is being run.
However, it occurs while the DRM device is still registered, which will
create dangling pointers, eventually resulting in use-after-free.
Switch to a DRM-managed allocation to keep our structure until the DRM
driver doesn't need it anymore.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-57-maxime@cerno.tech
|
|
The VC4 VEC driver private structure contains only a pointer to the
encoder and connector it implements. This makes the overall structure
somewhat inconsistent with the rest of the driver, and complicates its
initialisation without any apparent gain.
Let's embed the drm_encoder structure (through the vc4_encoder one) and
drm_connector into struct vc4_vec to fix both issues.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-56-maxime@cerno.tech
|