Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 229bedbf62b13af5aba6525ad10b62ad38d9ccb5 ]
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(),
instead of previously created rules, the tainted pointer is deleted
deveral times.
Fix this bug by using correct flow rules pointers.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8b3f38d2dae0397944814d691a419c451f9906f ]
Currently, if teardown_hca fails to execute during driver removal, mlx5
does not stop the health timer. Afterwards, mlx5 continue with driver
teardown. This may lead to a UAF bug, which results in page fault
Oops[1], since the health timer invokes after resources were freed.
Hence, stop the health monitor even if teardown_hca fails.
[1]
mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: cleanup
mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource
mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup
BUG: unable to handle page fault for address: ffffa26487064230
PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020
RIP: 0010:ioread32be+0x34/0x60
RSP: 0018:ffffa26480003e58 EFLAGS: 00010292
RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0
RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230
RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8
R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0
R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0
FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x175/0x180
? asm_exc_page_fault+0x26/0x30
? __pfx_poll_health+0x10/0x10 [mlx5_core]
? __pfx_poll_health+0x10/0x10 [mlx5_core]
? ioread32be+0x34/0x60
mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core]
? __pfx_poll_health+0x10/0x10 [mlx5_core]
poll_health+0x42/0x230 [mlx5_core]
? __next_timer_interrupt+0xbc/0x110
? __pfx_poll_health+0x10/0x10 [mlx5_core]
call_timer_fn+0x21/0x130
? __pfx_poll_health+0x10/0x10 [mlx5_core]
__run_timers+0x222/0x2c0
run_timer_softirq+0x1d/0x40
__do_softirq+0xc9/0x2c8
__irq_exit_rcu+0xa6/0xc0
sysvec_apic_timer_interrupt+0x72/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:cpuidle_enter_state+0xcc/0x440
? cpuidle_enter_state+0xbd/0x440
cpuidle_enter+0x2d/0x40
do_idle+0x20d/0x270
cpu_startup_entry+0x2a/0x30
rest_init+0xd0/0xd0
arch_call_rest_init+0xe/0x30
start_kernel+0x709/0xa90
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x96/0xa0
secondary_startup_64_no_verify+0x18f/0x19b
---[ end trace 0000000000000000 ]---
Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33afbfcc105a572159750f2ebee834a8a70fdd96 ]
In case pci channel becomes offline the driver should not wait for PCI
reads during health dump and recovery flow. The driver has timeout for
each of these loops trying to read PCI, so it would fail anyway.
However, in case of recovery waiting till timeout may cause the pci
error_detected() callback fail to meet pci_dpc_recovered() wait timeout.
Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cd4bc987abb2823836cbb8f887026011ccddc8a ]
Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.
Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1e5b9 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.
Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.
Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a8d3f2e3e8d8aea8af017e14227b91d5989b696 ]
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b0f7410942cdc420c4557eda02bfcdf60ccec17 ]
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260dd ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffbe335b8d471f79b259e950cb20999700670456 ]
When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base,
the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset
rq->data_ring.desc_size for the data ring that failed, which presumably
causes the hypervisor to reference it on packet reception.
To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell
the hypervisor to disable this feature.
[ 95.436876] kernel BUG at net/core/skbuff.c:207!
[ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1
[ 95.441558] Hardware name: VMware, Inc. VMware Virtual
Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018
[ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f
[ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50
ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9
ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24
[ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246
[ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f
[ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f
[ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60
[ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000
[ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0
[ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000
[ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0
[ 95.459791] Call Trace:
[ 95.460515] <IRQ>
[ 95.461180] ? __die_body.cold+0x19/0x27
[ 95.462150] ? die+0x2e/0x50
[ 95.462976] ? do_trap+0xca/0x110
[ 95.463973] ? do_error_trap+0x6a/0x90
[ 95.464966] ? skb_panic+0x4d/0x4f
[ 95.465901] ? exc_invalid_op+0x50/0x70
[ 95.466849] ? skb_panic+0x4d/0x4f
[ 95.467718] ? asm_exc_invalid_op+0x1a/0x20
[ 95.468758] ? skb_panic+0x4d/0x4f
[ 95.469655] skb_put.cold+0x10/0x10
[ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3]
[ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3]
[ 95.473185] __napi_poll+0x2b/0x160
[ 95.474145] net_rx_action+0x2c6/0x3b0
[ 95.475115] handle_softirqs+0xe7/0x2a0
[ 95.476122] __irq_exit_rcu+0x97/0xb0
[ 95.477109] common_interrupt+0x85/0xa0
[ 95.478102] </IRQ>
[ 95.478846] <TASK>
[ 95.479603] asm_common_interrupt+0x26/0x40
[ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90
[ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246
[ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000
[ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001
[ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3
[ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260
[ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000
[ 95.495035] acpi_safe_halt+0x14/0x20
[ 95.496127] acpi_idle_do_entry+0x2f/0x50
[ 95.497221] acpi_idle_enter+0x7f/0xd0
[ 95.498272] cpuidle_enter_state+0x81/0x420
[ 95.499375] cpuidle_enter+0x2d/0x40
[ 95.500400] do_idle+0x1e5/0x240
[ 95.501385] cpu_startup_entry+0x29/0x30
[ 95.502422] start_secondary+0x11c/0x140
[ 95.503454] common_startup_64+0x13e/0x141
[ 95.504466] </TASK>
[ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4
nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 rfkill ip_set nf_tables vsock_loopback
vmw_vsock_virtio_transport_common qrtr vmw_vsock_vmci_transport vsock
sunrpc binfmt_misc pktcdvd vmw_balloon pcspkr vmw_vmci i2c_piix4 joydev
loop dm_multipath nfnetlink zram crct10dif_pclmul crc32_pclmul vmwgfx
crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel
sha512_ssse3 sha256_ssse3 vmxnet3 sha1_ssse3 drm_ttm_helper vmw_pvscsi
ttm ata_generic pata_acpi serio_raw scsi_dh_rdac scsi_dh_emc
scsi_dh_alua ip6_tables ip_tables fuse
[ 95.516536] ---[ end trace 0000000000000000 ]---
Fixes: 6f4833383e85 ("net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()")
Signed-off-by: Matthias Stocker <mstocker@barracuda.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://lore.kernel.org/r/20240531103711.101961-1-mstocker@barracuda.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6149db4997f582e958da675092f21c666e3b67b7 ]
When the PHY is powered up after powered down most of the registers are
reset, so the PHY setup code needs to be done again. In addition the
interrupt register will need to be setup again so that link status
indication works again.
Fixes: 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d53b681ce9ca7db5ef4ecb8d2cf465ae4a031264 ]
An error unrelated to ufshcd_try_to_abort_task is being logged and can
cause confusion. Modify ufshcd_mcq_abort() to print the result of the abort
failure. For readability, return immediately instead of 'goto'.
Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240524015904.1116005-1-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4bb95f4535489ed830cf9b34b0a891e384d1aee4 ]
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE.
Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60d62757df30b74bf397a2847a6db7385c6ee281 ]
In some versions of cfg80211, the ssids poinet might be a valid one even
though n_ssids is 0. Accessing the pointer in this case will cuase an
out-of-bound access. Fix this by checking n_ssids first.
Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87821b67dea87addbc4ab093ba752753b002176a ]
The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f2e9f6f21d1ff292363cdfb5bc4d492eeaff76e ]
In the driver we only use skb_put* for adding data to the skb, hence data
never moves and skb_reset_mac_haeder would set mac_header to the first
time data was added and not to mac80211 header, fix this my using the
actual len of bytes added for setting the mac header.
Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]
We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.
Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92158790ce4391ce4c35d8dfbce759195e4724cb ]
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif
but we removed only from the pre-MLD version of the add_interface
callback. Remove it also from the MLD version.
Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f8367a74aebf88dc8b58a0db6a6c90b4cb8fc9d3 upstream.
errcmd_enable_error_reporting() uses pci_{read,write}_config_word()
that return PCIBIOS_* codes. The return code is then returned all the
way into the probe function igen6_probe() that returns it as is. The
probe functions, however, should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it from errcmd_enable_error_reporting().
Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240527132236.13875-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ec8ebd8a5b782d56347ae884de880af26f93996 upstream.
gpu_get_node_map() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned all the way into the module
init function amd64_edac_init() that returns it as is. The module init
functions, however, should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it from gpu_get_node_map().
For consistency, convert also the other similar cases which return
PCIBIOS_* codes even if they do not have any bugs at the moment.
Fixes: 4251566ebc1c ("EDAC/amd64: Cache and use GPU node map")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240527132236.13875-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38baed9b8600008e5d7bc8cb9ceccc1af3dd54b7 upstream.
In an In-Band Interrupt (IBI) handle, the code logic is as follows:
1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO,
master->regs + SVC_I3C_MCTRL);
2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val,
SVC_I3C_MSTATUS_IBIWON(val), 0, 1000);
...
3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return
immediately, and the I3C controller has not sent out the 9th SCL yet.
Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type
occurrence and missing call I3C client driver's IBI handler.
A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs
during the controller send start frame in svc_i3c_master_xfer().
Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI
to fix this issue.
Cc: stable@vger.kernel.org
Fixes: 5e5e3c92e748 ("i3c: master: svc: fix wrong data return when IBI happen during start frame")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240506164009.21375-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d4f9d5a99a3fd1b1c691b7a1a6f8f3f25f4116c9 upstream.
A system crash like this
Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403
Fault in home space mode while using kernel ASCE.
AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d
Oops: 0038 ilc:3 [#1] PREEMPT SMP
Modules linked in: mlx5_ib ...
CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3
000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0
000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff
000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8
Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a
0000014b75e7b600: 18b2 lr %r11,%r2
#0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616
>0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13)
0000014b75e7b60c: a7680001 lhi %r6,1
0000014b75e7b610: 187b lr %r7,%r11
0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654
0000014b75e7b616: 18e9 lr %r14,%r9
Call Trace:
[<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8
([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8)
[<0000014b75e7b758>] apmask_store+0x68/0x140
[<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8
[<0000014b75598524>] vfs_write+0x1b4/0x448
[<0000014b7559894c>] ksys_write+0x74/0x100
[<0000014b7618a440>] __do_syscall+0x268/0x328
[<0000014b761a3558>] system_call+0x70/0x98
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8
Kernel panic - not syncing: Fatal exception: panic_on_oops
occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value
(like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX.
The fix is simple: use unsigned long values for the internal variables. The
correct checks are already in place in the function but a simple int for
the internal variables was used with the possibility to overflow.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a705f3e49d20b59cd9e5cc3061b2d92ebe1e5f0 upstream.
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used.
Two attachments use the same VM, root PD would be locked twice.
[ 57.910418] Call Trace:
[ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu]
[ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu]
[ 57.793923] ? idr_get_next_ul+0xbe/0x100
[ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu]
[ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu]
[ 57.794141] ? process_scheduled_works+0x29c/0x580
[ 57.794147] process_scheduled_works+0x303/0x580
[ 57.794157] ? __pfx_worker_thread+0x10/0x10
[ 57.794160] worker_thread+0x1a2/0x370
[ 57.794165] ? __pfx_worker_thread+0x10/0x10
[ 57.794167] kthread+0x11b/0x150
[ 57.794172] ? __pfx_kthread+0x10/0x10
[ 57.794177] ret_from_fork+0x3d/0x60
[ 57.794181] ? __pfx_kthread+0x10/0x10
[ 57.794184] ret_from_fork_asm+0x1b/0x30
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.6.x only
Signed-off-by: Tomáš Trnka <trnka@scm.com>
[TT: trivially adjusted for 6.6 which does not have commit 05d249352f
(third argument to drm_exec_init removed)]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 21ae74e1bf18331ae5e279bd96304b3630828009 upstream.
If ath10k_snoc is built-in, while Qualcomm remoteprocs are built as
modules, compilation fails with:
/usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_init':
drivers/net/wireless/ath/ath10k/snoc.c:1534: undefined reference to `qcom_register_ssr_notifier'
/usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_deinit':
drivers/net/wireless/ath/ath10k/snoc.c:1551: undefined reference to `qcom_unregister_ssr_notifier'
Add corresponding dependency to ATH10K_SNOC Kconfig entry so that it's
built as module if QCOM_RPROC_COMMON is built as module too.
Fixes: 747ff7d3d742 ("ath10k: Don't always treat modem stop events as crashes")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240511-ath10k-snoc-dep-v1-1-9666e3af5c27@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a45835a0bb6ef7d5ddbc0714dd760de979cb6ece upstream.
"rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding:
remove redundant NULL check in debugfs function"). Here are the relevant
functions being called:
bonding_exit()
bond_destroy_debugfs()
debugfs_remove_recursive(bonding_debug_root);
bonding_debug_root = NULL; <--------- SET TO NULL HERE
bond_netlink_fini()
rtnl_link_unregister()
__rtnl_link_unregister()
unregister_netdevice_many_notify()
bond_uninit()
bond_debug_unregister()
(commit removed check for bonding_debug_root == NULL)
debugfs_remove()
simple_recursive_removal()
down_write() -> OOPS
However, reverting the bad commit does not solve the problem completely
because the original code contains a race that could cause the same
oops, although it was much less likely to be triggered unintentionally:
CPU1
rmmod bonding
bonding_exit()
bond_destroy_debugfs()
debugfs_remove_recursive(bonding_debug_root);
CPU2
echo -bond0 > /sys/class/net/bonding_masters
bond_uninit()
bond_debug_unregister()
if (!bonding_debug_root)
CPU1
bonding_debug_root = NULL;
So do NOT revert the bad commit (since the removed checks were racy
anyway), and instead change the order of actions taken during module
removal. The same oops can also happen if there is an error during
module init, so apply the same fix there.
Fixes: cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/641f914f-3216-4eeb-87dd-91b78aa97773@cybernetics.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cae58516534e110f4a8558d48aa4435e15519121 upstream.
On AM62x, the watchdog is pet before the valid window is open. Fix
min_hw_heartbeat and accommodate a 2% + static offset safety margin.
The static offset accounts for max hardware error.
Remove the hack in the driver which shifts the open window boundary,
since it is no longer necessary due to the fix mentioned above.
cc: stable@vger.kernel.org
Fixes: 5527483f8f7c ("watchdog: rti-wdt: attach to running watchdog during probe")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4f813c3ec9d1c32bc402becd1f011b3904dd699 upstream.
Add support for the Trace Hub in Meteor Lake-S CPU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-15-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4731baaf29438508197d3a8a6d4f5a8c51663f8 upstream.
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ea00e249ca992adee54dc71a526ee70ef109e40 upstream.
tpm_tis_core_init() may fail before tpm_tis_probe_irq_single() is
called, in which case tpm_tis_remove() unconditionally calling
flush_work() is triggering a warning for .func still being NULL.
Cc: stable@vger.kernel.org # v6.5+
Fixes: 481c2d14627d ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d09c05aa35909adb7d29f92f0cd79fdcd1338ef0 upstream.
Peter Schneider reported that a system would no longer boot after
updating to 6.8.4. Peter bisected the issue and identified commit
b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to
fetching page") as being the culprit.
Turns out the enclosure device in Peter's system reports a byteswapped
page length for VPD page 0. It reports "02 00" as page length instead
of "00 02". This causes us to attempt to access 516 bytes (page length
+ header) of information despite only 2 pages being present.
Limit the page search scope to the size of our VPD buffer to guard
against devices returning a larger page count than requested.
Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com
Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page")
Cc: stable@vger.kernel.org
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0eafc58f2194dbd01d4be40f99a697681171995b upstream.
The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s
shares the VCC33 supply with other peripherals that may remain powered
during suspend (e.g. when enabled as wakeup sources).
The reset line is also wired so that it can be left deasserted when the
supply is off.
This is important as it avoids holding the controller in reset for
extended periods of time when it remains powered, which can lead to
increased power consumption, and also avoids leaking current through the
X13s reset circuitry during suspend (and after driver unbind).
Use the new 'no-reset-on-power-off' devicetree property to determine
when reset needs to be asserted on power down.
Notably this also avoids wasting power on machine variants without a
touchscreen for which the driver would otherwise exit probe with reset
asserted.
Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Cc: <stable@vger.kernel.org> # 6.0
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f858bbf04dbac934ac279aaee05d49eb9910051 upstream.
There is an issue with ACPI overlay table removal specifically related
to I2C multiplexers.
Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an
existing I2C bus. When this table is loaded we see the creation of a
device for the overall PCA9548 chip and 8 further devices - one
i2c_adapter each for the mux channels. These are all bound to their
ACPI equivalents via an eventual invocation of acpi_bind_one().
When we unload the SSDT overlay we run into the problem. The ACPI
devices are deleted as normal via acpi_device_del_work_fn() and the
acpi_device_del_list.
However, the following warning and stack trace is output as the
deletion does not go smoothly:
------------[ cut here ]------------
kernfs: can not remove 'physical_node', no directory
WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1
Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023
Workqueue: kacpi_hotplug acpi_device_del_work_fn
RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0
Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000
RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780
RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff
R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50
R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8
FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0
Call Trace:
<TASK>
? kernfs_remove_by_name_ns+0xb9/0xc0
? __warn+0x7c/0x130
? kernfs_remove_by_name_ns+0xb9/0xc0
? report_bug+0x171/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? kernfs_remove_by_name_ns+0xb9/0xc0
? kernfs_remove_by_name_ns+0xb9/0xc0
acpi_unbind_one+0x108/0x180
device_del+0x18b/0x490
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
device_unregister+0xd/0x30
i2c_del_adapter.part.0+0x1bf/0x250
i2c_mux_del_adapters+0xa1/0xe0
i2c_device_remove+0x1e/0x80
device_release_driver_internal+0x19a/0x200
bus_remove_device+0xbf/0x100
device_del+0x157/0x490
? __pfx_device_match_fwnode+0x10/0x10
? srso_return_thunk+0x5/0x5f
device_unregister+0xd/0x30
i2c_acpi_notify+0x10f/0x140
notifier_call_chain+0x58/0xd0
blocking_notifier_call_chain+0x3a/0x60
acpi_device_del_work_fn+0x85/0x1d0
process_one_work+0x134/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe3/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
...
repeated 7 more times, 1 for each channel of the mux
...
The issue is that the binding of the ACPI devices to their peer I2C
adapters is not correctly cleaned up. Digging deeper into the issue we
see that the deletion order is such that the ACPI devices matching the
mux channel i2c adapters are deleted first during the SSDT overlay
removal. For each of the channels we see a call to i2c_acpi_notify()
with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not
actually i2c_clients, nothing is done for them.
Later on, after each of the mux channels has been dealt with, we come
to delete the i2c_client representing the PCA9548 device. This is the
call stack we see above, whereby the kernel cleans up the i2c_client
including destruction of the mux and its channel adapters. At this
point we do attempt to unbind from the ACPI peers but those peers no
longer exist and so we hit the kernfs errors.
The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But,
given that the life cycle of the adapters is linked to the i2c_client,
instead of deleting the i2c_adapters during the i2c_acpi_notify(), we
just trigger unbinding of the ACPI device from the adapter device, and
allow the clean up of the adapter to continue in the way it always has.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3b17c6d9dddc2db3670bc9be628b122416a3d26 upstream.
Using completion_done to determine whether the caller has gone
away only works after a complete call. Furthermore it's still
possible that the caller has not yet called wait_for_completion,
resulting in another potential UAF.
Fix this by making the caller use cancel_work_sync and then freeing
the memory safely.
Fixes: 7d42e097607c ("crypto: qat - resolve race condition during AER recovery")
Cc: <stable@vger.kernel.org> #6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c5b3e17b8fd1f1add5a9477306c355fab126977 upstream.
The clk_alpha_pll_stromer_set_rate() function writes inproper
values into the ALPHA_VAL{,_U} registers which results in wrong
clock rates when the alpha value is used.
The broken behaviour can be seen on IPQ5018 for example, when
dynamic scaling sets the CPU frequency to 800000 KHz. In this
case the CPU cores are running only at 792031 KHz:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
792031
This happens because the function ignores the fact that the alpha
value calculated by the alpha_pll_round_rate() function is only
32 bits wide which must be extended to 40 bits if it is used on
a hardware which supports 40 bits wide values.
Extend the clk_alpha_pll_stromer_set_rate() function to convert
the alpha value to 40 bits before wrinting that into the registers
in order to ensure that the hardware really uses the requested rate.
After the change the CPU frequency is correct:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
800000
Cc: stable@vger.kernel.org
Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6dc445c1905096b2ed4db1a84570375b4e00cc0f upstream.
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-2-e2db3b82d5ef@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9368cdf90f52a68120d039887ccff74ff33b4444 upstream.
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
clk_dvp_probe() due to ->num being assigned after ->hws has been
accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-1-e2db3b82d5ef@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd2b75fd9a79bf418e088656822af06fc253dbe3 upstream.
This reverts commit 28ebbb4981cb1fad12e0b1227dbecc88810b1ee8.
Revert this commit as apparently the LLVM code to take advantage of
this never landed.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Feifei Xu <feifei.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 267cace556e8a53d703119f7435ab556209e5b6a upstream.
commit cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for
some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues
that were reported since commit 31729e8c21ec ("drm/amd/pm: fixes a
random hang in S4 for SMU v13.0.4/11") but caused issues for some
people.
Adjust the workaround flow to properly only apply in the S4 case:
-> For shutdown go through SMU_MSG_PrepareMp1ForUnload
-> For S4 go through SMU_MSG_GfxDeviceDriverReset and
SMU_MSG_PrepareMp1ForUnload
Reported-and-tested-by: lectrode <electrodexsnet@gmail.com>
Closes: https://github.com/void-linux/void-packages/issues/50417
Cc: stable@vger.kernel.org
Fixes: cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users")
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e64e8f7c178e5228e0b2dbb504b9dc75953a319f upstream.
[Why]
The vram width value is 0.
Because the integratedsysteminfo table in VBIOS has updated to 2.3.
[How]
Driver needs a new intergrated info v2.3 table too.
Then the vram width value will be correct.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ad959b6703e2c4c5d7af03b4cfd5ff608036339 upstream.
The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero")
checks the value of pixclock to avoid divide-by-zero error. However
the function savagefb_probe doesn't handle the error return of
savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.
Fixes: 04e5eac8f3ab ("fbdev: savage: Error out if pixclock equals zero")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 87cb4a612a89690b123e68f6602d9f6581b03597 upstream.
Framebuffer memory is allocated via vzalloc() from non-contiguous
physical pages. The physical framebuffer start address is therefore
meaningless. Do not set it.
The value is not used within the kernel and only exported to userspace
on dedicated ARM configs. No functional change is expected.
v2:
- refer to vzalloc() in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a5b44c4adb16 ("drm/fbdev-generic: Always use shadow buffering")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de
(cherry picked from commit 73ef0aecba78aa9ebd309b10b6cd17d94e632892)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
T100TA
commit 431946c0f640c93421439a6c928efb3152c035a4 upstream.
The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models
stopped working under Linux after commit 6fd03f024828 ("gpiolib: acpi:
support bias pull disable").
The GPIO in question is connected to a mechanical switch in the slot
which shorts the pin to GND when a card is inserted.
The GPIO pin correctly gets configured with a 20K pull-up by the BIOS,
but there is a bug in the DSDT where the GpioInt for the card-detect is
configured with a PullNone setting:
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0026
}
Linux now actually honors the PullNone setting and disables the 20K pull-up
configured by the BIOS.
Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls
mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for
the Asus T100TA models to fix this.
Fixes: 6fd03f024828 ("gpiolib: acpi: support bias pull disable")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef3eab75e17191e5665f52e64e85bc29d5705a7b upstream.
On the Toshiba WT10-A the microSD slot always reports the card being
write-protected, just like on the Toshiba WT8-B.
Add a DMI quirk to work around this.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-6-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f3521d7cbaefff19cc656325787ed797e5f6a955 upstream.
The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin
and a broken wp pin which always reports the card being write-protected.
Add a DMI quirk to address both issues.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-5-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a92a73b1d9249d155412d8ac237142fa716803ea upstream.
Sort the DMI quirks alphabetically.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-4-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3855668d98cf9c6aec2db999dd27d872f8ba878 upstream.
Most Bay Trail devices do not enable UHS modes for the external sdcard slot
the Lenovo Yoga Tablet 2 830 / 1050 and Lenovo Yoga Tablet 2 Pro 1380 (8",
10" and 13") models however do enable this.
Using a UHS cards in these tablets results in errors like this one:
[ 225.272001] mmc2: Unexpected interrupt 0x04000000.
[ 225.272024] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 225.272034] mmc2: sdhci: Sys addr: 0x0712c400 | Version: 0x0000b502
[ 225.272044] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000007
[ 225.272054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023
[ 225.272064] mmc2: sdhci: Present: 0x01e20002 | Host ctl: 0x00000016
[ 225.272073] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 225.272082] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
[ 225.272092] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000001
[ 225.272101] mmc2: sdhci: Int enab: 0x03ff000b | Sig enab: 0x03ff000b
[ 225.272110] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001
[ 225.272119] mmc2: sdhci: Caps: 0x076864b2 | Caps_1: 0x00000004
[ 225.272129] mmc2: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000
[ 225.272138] mmc2: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000
[ 225.272147] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000900
[ 225.272155] mmc2: sdhci: Host ctl2: 0x0000000c
[ 225.272164] mmc2: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x0712c200
[ 225.272172] mmc2: sdhci: ============================================
which results in IO errors leading to issues accessing the sdcard.
0x04000000 is a so-called "Tuning Error" which sofar the SDHCI driver
does not support / enable. Modify the IRQ handler to process these.
This fixes UHS microsd cards not working with these tablets.
Link: https://lore.kernel.org/r/199bb4aa-c6b5-453e-be37-58bbf468800c@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-3-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63a7cd660246aa36af263b85c33ecc6601bf04be upstream.
Some mmc host drivers may need to fixup a card-detection GPIO's config
to e.g. enable the GPIO controllers builtin pull-up resistor on devices
where the firmware description of the GPIO is broken (e.g. GpioInt with
PullNone instead of PullUp in ACPI DSDT).
Since this is the exception rather then the rule adding a config
parameter to mmc_gpiod_request_cd() seems undesirable, so instead
add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper
to call gpiod_set_config() on the card-detect GPIO acquired through
mmc_gpiod_request_cd().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55c421b364482b61c4c45313a535e61ed5ae4ea3 upstream.
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text)
Fixes: b4cff4549b7a ("DaVinci: MMC: MMC/SD controller driver for DaVinci family")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d8acd02c4c6a8f917eefac1de2e035521ca119d upstream.
struct v4l2_async_notifier has several list_head members, but only
waiting_list and done_list are initialized. notifier_entry was kept
'zeroed' leading to an uninitialized list_head.
This results in a NULL-pointer dereference if csi2_async_register() fails,
e.g. node for remote endpoint is disabled, and returns -ENOTCONN.
The following calls to v4l2_async_nf_unregister() results in a NULL
pointer dereference.
Add the missing list head initializer.
Fixes: b8ec754ae4c5 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46bc0234ad38063ce550ecf135c1a52458f0a804 upstream.
The V4L2 device used to be set when the notifier was registered but this
has been moved to the notifier initialisation. Don't touch the V4L2 device
if registration fails.
Fixes: b8ec754ae4c5 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9537a8425a7a0222999d5839a0b394b1e8834b4a upstream.
The notifier_entry of a notifier is not re-initialised after unregistering
the notifier. This leads to dangling pointers being left there so use
list_del_init() to return the notifier_entry an empty list.
Fixes: b8ec754ae4c5 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ed4477f2ea4743e7c5e1f9f3722152d14e6eeb1 upstream.
After the new V4L2 device node was registered, some additional
initialization was done before the device node was marked as
'registered'. During the time between creating the device node
and marking it as 'registered' it was possible to open the
device node, which would return -ENODEV since the 'registered'
flag was not yet set.
Hold the videodev_lock mutex from just before the device node
is registered until the 'registered' flag is set. Since v4l2_open
will take the same lock, it will wait until this registration
process is finished. This resolves this race condition.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org> # for vi4.18 and up
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 526f4527545b2d4ce0733733929fac7b6da09ac6 upstream.
When building for LoongArch with clang 18.0.0, the stack usage of
probe() is larger than the allowed 2048 bytes:
drivers/media/dvb-frontends/mxl5xx.c:1698:12: warning: stack frame size (2368) exceeds limit (2048) in 'probe' [-Wframe-larger-than]
1698 | static int probe(struct mxl *state, struct mxl5xx_cfg *cfg)
| ^
1 warning generated.
This is the result of the linked LLVM commit, which changes how the
arrays of structures in config_ts() get handled with
CONFIG_INIT_STACK_ZERO and CONFIG_INIT_STACK_PATTERN, which causes the
above warning in combination with inlining, as config_ts() gets inlined
into probe().
This warning can be easily fixed by moving the array of structures off
of the stackvia 'static const', which is a better location for these
variables anyways because they are static data that is only ever read
from, never modified, so allocating the stack space is wasteful.
This drops the stack usage from 2368 bytes to 256 bytes with the same
compiler and configuration.
Link: https://lore.kernel.org/linux-media/20240111-dvb-mxl5xx-move-structs-off-stack-v1-1-ca4230e67c11@kernel.org
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1977
Link: https://github.com/llvm/llvm-project/commit/afe8b93ffdfef5d8879e1894b9d7dda40dee2b8d
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|