| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[Why & How]
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.
Use __netif_tx_lock_bh() for TX queue locking.
Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path")
Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the DCN20 resource initialization, ensure that DMCUB support starts
configured as true.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Subtract the VRAM pinned memory when checking for available memory
in amdgpu_amdkfd_reserve_mem_limit function since that memory is not
available for use.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ublk_drv currently creates block devices with the default max_segments
and max_segment_size limits of BLK_MAX_SEGMENTS (128) and
BLK_MAX_SEGMENT_SIZE (65536) respectively. These defaults can
artificially constrain the I/O size seen by the ublk server - for
example, suppose that the ublk server has configured itself to accept
I/Os up to 1M and the application is also issuing 1M sized I/Os. If the
I/O buffer used by the application is backed by 4K pages, the buffer
could consist of up to 1M / 4K = 256 physically discontiguous segments
(even if the buffer is virtually contiguous). As such, the I/O could
exceed the default max_segments limit and get split. This can cause
unnecessary performance issues if the ublk server is optimized to handle
1M I/Os. The block layer's segment count/size limits exist to model
hardware constraints which don't exist in ublk_drv's case, so just
remove those limits for the block devices created by ublk_drv.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Riley Thomasson <riley@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240430211623.2802036-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
device_get_match_data() function should not be used on the device other
than the one matched to the given driver, because it always returns the
match_data of the matched driver. In case of exynos-clkout driver, the
original code matches the OF IDs on the PARENT device, so replacing it
with of_device_get_match_data() broke the driver.
This has been already pointed once in commit 2bc5febd05ab ("clk: samsung:
Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"").
To avoid further confusion, add a comment about this special case, which
requires direct of_match_device() call to pass custom IDs array.
This partially reverts commit 409c39ec92a35e3708f5b5798c78eae78512cd71.
Cc: <stable@vger.kernel.org>
Fixes: 409c39ec92a3 ("clk: Use device_get_match_data()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20240425075628.838497-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240430184656.357805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/input/mouse/amimouse: section mismatch in reference: amimouse_driver+0x8 (section: .data) -> amimouse_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/2e3783106bf6bd9a7bdeb12b706378fb16316471.1711748999.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
typec_register_partner() does not guarantee partner registration
to always succeed. In the event of failure, port->partner is set
to the error value or NULL. Given that port->partner validity is
not checked, this results in the following crash:
Unable to handle kernel NULL pointer dereference at virtual address xx
pc : run_state_machine+0x1bc8/0x1c08
lr : run_state_machine+0x1b90/0x1c08
..
Call trace:
run_state_machine+0x1bc8/0x1c08
tcpm_state_machine_work+0x94/0xe4
kthread_worker_fn+0x118/0x328
kthread+0x1d0/0x23c
ret_from_fork+0x10/0x20
To prevent the crash, check for port->partner validity before
derefencing it in all the call sites.
Cc: stable@vger.kernel.org
Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before sending Enter Mode for an Alt Mode, there is a gap between Discover
Modes and the Alt Mode driver queueing the Enter Mode VDM for the port
partner to send a message to the port.
If this message results in unregistering Alt Modes such as in a DR_SWAP,
then the following deadlock can occur with respect to the DisplayPort Alt
Mode driver:
1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver
results in a cancel_work_sync() that waits for the current dp_altmode_work
to finish.
2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs
because tcpm_queue_vdm_unlock attempts to hold port->lock.
Before attempting to grab the lock, ensure that the port is in a state
vdm_run_state_machine can run in. Alt Mode unregistration will not occur
in these states.
Fixes: 03eafcfb60c0 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check and unregister existing source caps in tcpm_register_source_caps
function before registering new ones. This change fixes following
warning when port partner resends source caps after negotiating PD contract
for the purpose of re-negotiation.
[ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities'
[ 343.135071][ T151] Call trace:
[ 343.135076][ T151] dump_backtrace+0xe8/0x108
[ 343.135099][ T151] show_stack+0x18/0x24
[ 343.135106][ T151] dump_stack_lvl+0x50/0x6c
[ 343.135119][ T151] dump_stack+0x18/0x24
[ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140
[ 343.135137][ T151] kobject_add_internal+0x228/0x424
[ 343.135146][ T151] kobject_add+0x94/0x10c
[ 343.135152][ T151] device_add+0x1b0/0x4c0
[ 343.135187][ T151] device_register+0x20/0x34
[ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c
[ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8
[ 343.135216][ T151] kthread_worker_fn+0x11c/0x260
[ 343.135227][ T151] kthread+0x114/0x1bc
[ 343.135235][ T151] ret_from_fork+0x10/0x20
[ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory.
Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a Fast Role Swap control message attempt results in a transition
to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event.
If the event is queued but processed after the tcpm_reset_port() call
in the PORT_RESET state, then the following occurs:
1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and
sinking state
2. tcpm_pd_event_handler() turns VBUS on before the port is in the default
state.
3. The port resolves as a sink. In the SNK_DISCOVERY state,
tcpm_set_charge() cannot set vbus to charge.
Clear pd events within PORT_RESET to get rid of non-applicable events.
Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcpm_queue_vdm_unlocked queues VDMs over SOP regardless of input
parameter tx_sop_type. Fix tcpm_queue_vdm() call.
Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202546.3374218-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 8b7de6aa8468 ("vmwgfx: Rework fence event action")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23566
Cc: David Airlie <airlied@gmail.com>
CC: Daniel Vetter <daniel@ffwll.ch>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.4+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425192748.1761522-1-zack.rusin@broadcom.com
|
|
Currently we allocate all 3 levels of radix3 page tables using
nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of
the relevant memory. This can end up failing in scenarios where the system
has very high memory fragmentation, and we can't find enough contiguous
memory to allocate level 2 of the page table.
Currently, this can result in runtime PM issues on systems where memory
fragmentation is high - as we'll fail to allocate the page table for our
suspend/resume buffer:
kworker/10:2: page allocation failure: order:7, mode:0xcc0(GFP_KERNEL),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 10 PID: 479809 Comm: kworker/10:2 Not tainted
6.8.6-201.ChopperV6.fc39.x86_64 #1
Hardware name: SLIMBOOK Executive/Executive, BIOS N.1.10GRU06 02/02/2024
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x64/0x80
warn_alloc+0x165/0x1e0
? __alloc_pages_direct_compact+0xb3/0x2b0
__alloc_pages_slowpath.constprop.0+0xd7d/0xde0
__alloc_pages+0x32d/0x350
__dma_direct_alloc_pages.isra.0+0x16a/0x2b0
dma_direct_alloc+0x70/0x270
nvkm_gsp_radix3_sg+0x5e/0x130 [nouveau]
r535_gsp_fini+0x1d4/0x350 [nouveau]
nvkm_subdev_fini+0x67/0x150 [nouveau]
nvkm_device_fini+0x95/0x1e0 [nouveau]
nvkm_udevice_fini+0x53/0x70 [nouveau]
nvkm_object_fini+0xb9/0x240 [nouveau]
nvkm_object_fini+0x75/0x240 [nouveau]
nouveau_do_suspend+0xf5/0x280 [nouveau]
nouveau_pmops_runtime_suspend+0x3e/0xb0 [nouveau]
pci_pm_runtime_suspend+0x67/0x1e0
? __pfx_pci_pm_runtime_suspend+0x10/0x10
__rpm_callback+0x41/0x170
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_callback+0x5d/0x70
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_suspend+0x120/0x6a0
pm_runtime_work+0x98/0xb0
process_one_work+0x171/0x340
worker_thread+0x27b/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
Luckily, we don't actually need to allocate coherent memory for the page
table thanks to being able to pass the GPU a radix3 page table for
suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg
allocator for level 2. We continue using coherent allocations for lvl0 and
1, since they only take a single page.
V2:
* Don't forget to actually jump to the next scatterlist when we reach the
end of the scatterlist we're currently on when writing out the page table
for level 2
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-2-lyude@redhat.com
|
|
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a
BUG() on startup:
kernel BUG at include/linux/scatterlist.h:187!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30
Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019
RIP: 0010:sg_init_one+0x85/0xa0
Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54
24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b
0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00
RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000
RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508
R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018
FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0
Call Trace:
<TASK>
? die+0x36/0x90
? do_trap+0xdd/0x100
? sg_init_one+0x85/0xa0
? do_error_trap+0x65/0x80
? sg_init_one+0x85/0xa0
? exc_invalid_op+0x50/0x70
? sg_init_one+0x85/0xa0
? asm_exc_invalid_op+0x1a/0x20
? sg_init_one+0x85/0xa0
nvkm_firmware_ctor+0x14a/0x250 [nouveau]
nvkm_falcon_fw_ctor+0x42/0x70 [nouveau]
ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau]
r535_gsp_oneinit+0xb3/0x15f0 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? nvkm_udevice_new+0x95/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? ktime_get+0x47/0xb0
? srso_return_thunk+0x5/0x5f
nvkm_subdev_oneinit_+0x4f/0x120 [nouveau]
nvkm_subdev_init_+0x39/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
nvkm_subdev_init+0x44/0x90 [nouveau]
nvkm_device_init+0x166/0x2e0 [nouveau]
nvkm_udevice_init+0x47/0x70 [nouveau]
nvkm_object_init+0x41/0x1c0 [nouveau]
nvkm_ioctl_new+0x16a/0x290 [nouveau]
? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau]
? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau]
nvkm_ioctl+0x126/0x290 [nouveau]
nvif_object_ctor+0x112/0x190 [nouveau]
nvif_device_ctor+0x23/0x60 [nouveau]
nouveau_cli_init+0x164/0x640 [nouveau]
nouveau_drm_device_init+0x97/0x9e0 [nouveau]
? srso_return_thunk+0x5/0x5f
? pci_update_current_state+0x72/0xb0
? srso_return_thunk+0x5/0x5f
nouveau_drm_probe+0x12c/0x280 [nouveau]
? srso_return_thunk+0x5/0x5f
local_pci_probe+0x45/0xa0
pci_device_probe+0xc7/0x270
really_probe+0xe6/0x3a0
__driver_probe_device+0x87/0x160
driver_probe_device+0x1f/0xc0
__driver_attach+0xec/0x1f0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x88/0xd0
bus_add_driver+0x116/0x220
driver_register+0x59/0x100
? __pfx_nouveau_drm_init+0x10/0x10 [nouveau]
do_one_initcall+0x5b/0x320
do_init_module+0x60/0x250
init_module_from_file+0x86/0xc0
idempotent_init_module+0x120/0x2b0
__x64_sys_finit_module+0x5e/0xb0
do_syscall_64+0x83/0x160
? srso_return_thunk+0x5/0x5f
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7feeb5cc20cd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0
ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd
RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035
RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310
R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0
R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80
</TASK>
We hit this when trying to initialize firmware of type
NVKM_FIRMWARE_IMG_DMA because we allocate our memory with
dma_alloc_coherent, and DMA allocations can't be turned back into memory
pages - which a scatterlist needs in order to map them.
So, fix this by allocating the memory with vmalloc instead().
V2:
* Fixup explanation as the prior one was bogus
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-1-lyude@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- mt6360_charger: Fix of_match for usb-otg-vbus regulator
- rt9455: Fix unused-const-variable for !CONFIG_USB_PHY
* tag 'for-v6.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator
power: rt9455: hide unused rt9455_boost_voltage_values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
|
|
A virtual SuperSpeed device in the FreeBSD BVCP package
(https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256.
It stopped working with Linux following a recent commit because now we
check these sizes more carefully than before.
Fix this regression by using the bMaxpacketSize0 value in the device
descriptor for SuperSpeed or faster devices, even if it is invalid. This
is a very simple-minded change; we might want to check more carefully for
values that actually make some sense (for instance, no smaller than 64).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Roger Whittaker <roger.whittaker@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569
Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/
Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Testing ohci functionality with qemu's pci-ohci emulation often results
in ohci interface stalls, resulting in hung task timeouts.
The problem is caused by lost interrupts between the emulation and the
Linux kernel code. Additional interrupts raised while the ohci interrupt
handler in Linux is running and before the handler clears the interrupt
status are not handled. The fix for a similar problem in ehci suggests
that the problem is likely caused by edge-triggered MSI interrupts. See
commit 0b60557230ad ("usb: ehci: Prevent missed ehci interrupts with
edge-triggered MSI") for details.
Ensure that the ohci interrupt code handles all pending interrupts before
returning to solve the problem.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: stable@vger.kernel.org
Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20240429154010.1507366-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-linus
Xu writes:
FPGA Manager changes for 6.9-final
DFL
- Peter adds PCI ID table for Intel D5005 Stratix 10 FPGA card
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our fixes branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull Allwinner clk driver fixes from Jernej Skrabec:
- fix H6 CPU rate change via reparenting
- set A64 MIPI PLL min & max rate
* tag 'sunxi-clk-fixes-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Minor core fix to prevent the sd driver printing the stream count
every time we rescan and instead print only if it's changed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Only print updates to permanent stream count
|
|
Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.
Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Robert reported the following when booting a CXL host with Restricted CXL
Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device
[ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8
The iterator to walk the PCIe path did not account for RCH topology.
However RCH does not support hotplug and the memory exported by the
Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinate is needed. Add check to see if the endpoint device is
RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order
to exercise the topology iterator. The dev_is_pci() check added is to help
with this test and should be harmless for normal operation.
Reported-by: Robert Richter <rrichter@amd.com>
Closes: https://lore.kernel.org/all/Ziv8GfSMSbvlBB0h@rric.localdomain/
Fixes: 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240426224913.1027420-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
VXLAN stores per-VNI statistics using vxlan_vnifilter_count().
These statistics were not updated when arp_reduce() failed its
pskb_may_pull() call.
Use vxlan_vnifilter_count() to update the VNI counter when that
happens.
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VXLAN devices update their stats locklessly. Therefore these counters
should either be stored in per-cpu data structures or the updates
should be done using atomic increments.
Since the net_device_core_stats infrastructure is already used in
vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter
updates. Update the other counters atomically using DEV_STATS_INC().
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the host page size was more than 4 times larger than the FW page
size, this macro evaluated to zero resulting in zero-sized arrays.
Use DIV_ROUND_UP() to ensure the correct behavior.
Reported-by: 20240228012313.5934-1-yaolu@kylinos.cn
Closes: https://lore.kernel.org/dri-devel/20240228012313.5934-1-yaolu@kylinos.cn
Link: https://lore.kernel.org/dri-devel/20240228012313.5934-1-yaolu@kylinos.cn
Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
|
|
Add Grand Ridge (ATOM_CRESTMONT) to hpm_cpu_ids, so that MSR 0x54 can be
used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240422212222.3881606-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
1394 OHCI driver generates packet data for the response subaction to the
request subaction to some local registers. In the case, the driver should
assign timestamp to them by itself.
This commit fulfills the timestamp for the subaction.
Cc: stable@vger.kernel.org
Fixes: dcadfd7f7c74 ("firewire: core: use union for callback of transaction completion")
Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
packet contents
Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows.
Signed-off-by: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
In __pci_register_driver(), the pci core overwrites the dev_groups field of
the embedded struct device_driver with the dev_groups from the outer
struct pci_driver unconditionally.
Set dev_groups in the pci_driver to make sure it is used.
This was broken since the introduction of pvpanic-pci.
Fixes: db3a4f0abefd ("misc/pvpanic: add PCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Fixes: ded13b9cfd59 ("PCI: Add support for dev_groups to struct pci_driver")
Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.
Only compile tested.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.
Only compile tested.
Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced these functions.
Only compile tested.
Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Explicitly set 'rc' (return code), before jumping to the
unlock and return path.
By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.
Fixes: 72f96347628e ("net: bcmgenet: set Rx mode before starting netif")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d20f ("net: bcmgenet: power on MII block for all MII modes")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a double free bug in the init error path of the GICv3 irqchip
driver"
* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Prevent double free on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single AMD driver fix for wake interrupt handling in clockstop mode
* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: fix for wake interrupt handling for clockstop mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Revert pl330 issue_pending waits until WFP state due to regression
reported in Bluetooth loading
- Xilinx driver fixes for synchronization, buffer offsets, locking and
kdoc
- idxd fixes for spinlock and preventing the migration of the perf
context to an invalid target
- idma driver fix for interrupt handling when powered off
- Tegra driver residual calculation fix
- Owl driver register access fix
* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
dmaengine: xilinx: xdma: Fix synchronization issue
dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
dma: xilinx_dpdma: Fix locking
dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
idma64: Don't try to serve interrupts when device is powered off
dmaengine: tegra186: Fix residual calculation
dmaengine: owl: fix register access functions
dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- static checker (array size, bounds) fix for marvel driver
- Rockchip rk3588 pcie fixes for bifurcation and mux
- Qualcomm qmp-compbo fix for VCO, register base and regulator name for
m31 driver
- charger det crash fix for ti driver
* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
phy: qcom: m31: match requested regulator name with dt schema
phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
phy: qcom: qmp-combo: Fix VCO div offset on v3
phy: rockchip: naneng-combphy: Fix mux on rk3588
phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
phy: rockchip-snps-pcie3: fix bifurcation on rk3588
phy: freescale: imx8m-pcie: fix pcie link-up instability
phy: marvell: a3700-comphy: Fix hardcoded array size
phy: marvell: a3700-comphy: Fix out of bounds read
|
|
Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il
Fixes: 4b1acc43331d ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- moxart: Fix regression for sg_miter for PIO mode
- sdhci-msm: Avoid hang by preventing access to suspended controller
- sdhci-of-dwcmshc: Fix SD card tuning error for th1520
* tag 'mmc-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: moxart: fix handling of sgm->consumed, otherwise WARN_ON triggers
mmc: sdhci-of-dwcmshc: th1520: Increase tuning loop count to 128
mmc: sdhci-msm: pervent access to suspended controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"There has been OTP support improvements in the NVMEM subsystem, and
later also improvements of OTP support in the NAND subsystem. This
lead to situations that we currently cannot handle, so better prevent
this situation from happening in order to avoid canceling device's
probe.
In the raw NAND subsystem, two runtime fixes have been shared, one
fixing two important commands in the Qcom driver since it got reworked
and a NULL pointer dereference happening on STB chips.
Arnd also fixed a UBSAN link failure on diskonchip"
* tag 'mtd/fixes-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: limit OTP NVMEM cell parse to non-NAND devices
mtd: diskonchip: work around ubsan link failure
mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()
mtd: rawnand: brcmnand: Fix data access violation for STB chip
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in pin access control in gpio-tegra186
- make data pointer dereference robust in Intel Tangier driver
* tag 'gpio-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra186: Fix tegra186_gpio_is_accessible() check
gpio: tangier: Use correct type for the IRQ chip data
|
