summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-09-08netdev/phy: mdio-mux-mmioreg.c should include of_address.hTimur Tabi1-0/+1
mdio-mux-mmioreg.c uses function of_address_to_resource(), which is defined in linux/of_address.h. This fixes a compilation error: drivers/net/phy/mdio-mux-mmioreg.c: In function 'mdio_mux_mmioreg_probe': drivers/net/phy/mdio-mux-mmioreg.c:83:2: error: implicit declaration of function 'of_address_to_resource' Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net: qmi_wwan: use a single bind function for all device typesBjørn Mork1-29/+16
Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net: qmi_wwan: increase max QMI message size to 4096Bjørn Mork1-1/+1
QMI requests exceeding 1500 bytes are possible and device firmware does not handle fragmented messages very well. It is therefore necessary to increase the maximum message size from the current 512 bytes. The protocol message size limit is not documented in any publicly known source, but the out of tree driver from CodeAurora use 4 kB. This is therefore chosen as the new arbitrary default until the real limit is known. This should allow any QMI message to be transmitted without fragmentation, fixing known issues with GPS assistance data upload. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07drivers/net/usb/sierra_net.c: removes unnecessary semicolonPeter Senna Tschudin1-1/+1
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06be2net: use PCIe AER capabilitySathya Perla1-0/+8
This patch allows code to handle the PCIe AER capability. The PCI callbacks for error handling/reset/recovery already exist in be2net and have been tested with EEH/ppc. This patch has been tested using the aer-inject tool. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06bnx2x: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-2/+1
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06cxgb4: Remove duplicate register definitionsVipul Pandya4-58/+30
Removed duplicate definition for SGE_PF_KDOORBELL, SGE_INT_ENABLE3, PCIE_MEM_ACCESS_OFFSET registers. Moved the register field definitions around the register definition. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Reviewed-by: Sivakumar Subramani <sivasu@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06RDMA/cxgb4: Update RDMA/cxgb4 due to macro definition removal in cxgb4 driverVipul Pandya1-1/+1
cxgb4 driver has duplicate definitions of registers which will be removed. This patch updates the RDMA/cxgb4 driver accordingly. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Reviewed-by: Sivakumar Subramani <sivasu@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06Revert "usbnet: drop unneeded check for NULL"Oliver Neukum1-1/+2
This reverts commit 5d65878d7031b6c39054b282faceff406bb2fda9. The upper layers call usbnet_start_xmit() with a valid skb. However cdc_ncm abuses this method by calling it with NULL to trigger IO for the aggregated private skb holding erlier packets. Until cdc_ncm is fixed, the check for NULL must be reintroduced. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-05ixgbe: remove old init remnantEliezer Tamir1-5/+0
Remove a for loop that does nothing in ixgbe_probe(). This is a remnant from when we had IO bars (compare to the ixgb code). Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-05igb: Supported and Advertised Pause FrameAkeem G. Abodunrin1-3/+18
This patch add ethtool supports for Supported and Advertised Pause Frame, based on Adapter Flow Control settings. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-05igb: reduce Rx header sizeEric Dumazet1-2/+2
Reduce skb truesize by 256 bytes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-05igb: Add loopback test support for i210Carolyn Wyborny1-35/+16
Early release of i210 devices had the loopback test of the ethtool self-test disabled. This patch enables the loopback test for i210 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-04ieee802154: MRF24J40 driverAlan Ott3-0/+779
Driver for the Microchip MRF24J40 802.15.4 WPAN module. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-04usbnet: drop unneeded check for NULLOliver Neukum1-2/+1
usbnet_start_xmit() is always called with a valid skb Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-03net: sierra_net: rx_urb_size is constantBjørn Mork1-13/+4
The rx_urb_size is set to the same value for every device supported by this driver. No need to keep a per-device data structure to do that. Replacing with a macro constant. This was the last device specific info, and removing it allows us to delete the sierra_net_info_data struct. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-03net: sierra_net: make private symbols staticBjørn Mork1-3/+3
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-03net: cx82310_eth: use common match macroBjørn Mork1-10/+1
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01r8169: add D-Link DGE-560T identifiers.Francois Romieu1-0/+2
This one includes a 8168. Not to be confused with the sky2 driven one whose PCI vendor and device ID are the same. Reported-by: Neyuki Inaya <in@joblog.ru> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01bonding: add some slack to arp monitoring time limitsJiri Bohac1-11/+20
Currently, all the time limits in the bonding ARP monitor are in multiples of arp_interval -- the time interval at which the ARP monitor is periodically scheduled. With a fast network round-trip and a little scheduling latency of the ARP monitor work, a limit of n*delta_in_ticks may effectively mean (n-1)*delta_in_ticks. This is fatal in case of n==1 (the link will stay down forever) and makes the behaviour non-deterministic in all the other cases. Add a delta_in_ticks/2 time slack to all the time limits. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01net:stmmac: convert driver to use devm_request_and_ioremap.Srinivas Kandagatla1-32/+8
This patch moves calls to ioremap and request_mem_region to devm_request_and_ioremap call. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01net:stmmac: Remove bus_id from mdio platform data.Srinivas Kandagatla2-6/+3
This patch removes bus_id from mdio platform data, The reason to remove bus_id is, stmmac mdio bus_id is always same as stmmac bus-id, so there is no point in passing this in different variable. Also stmmac ethernet driver connects to phy with bus_id passed its platform data. So, having single bus-id is much simpler. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01net:stmmac: fix broken stmmac_pltfr_remove.Srinivas Kandagatla1-1/+2
This patch fixes stmmac_pltfr_remove function, which is broken because, it is accessing plat variable via freed memory priv pointer which gets freed by free_netdev called from stmmac_dvr_remove. In short this patch caches the plat pointer in local variable before calling stmmac_dvr_remove to prevent code accessing freed memory. Without this patch any attempt to remove the stmmac device will fail as below: Unregistering eth 0 ... Unable to handle kernel paging request at virtual address 6b6b6bab pgd = de5dc000 [6b6b6bab] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP Modules linked in: cdev(O+) CPU: 0 Tainted: G O (3.3.1_stm24_0210-b2000+ #25) PC is at stmmac_pltfr_remove+0x2c/0xa0 LR is at stmmac_pltfr_remove+0x28/0xa0 pc : [<c01b8908>] lr : [<c01b8904>] psr: 60000013 sp : def6be78 ip : de6c5a00 fp : 00000000 r10: 00000028 r9 : c082d81d r8 : 00000001 r7 : de65a600 r6 : df81b240 r5 : c0413fd8 r4 : 00000000 r3 : 6b6b6b6b r2 : def6be6c r1 : c0355e2b r0 : 00000020 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 5e5dc04a DAC: 00000015 Process insmod (pid: 738, stack limit = 0xdef6a2f0) Stack: (0xdef6be78 to 0xdef6c000) be60: c0413fe0 c0403658 be80: c0400bb0 c019270c c01926f8 c0191478 00000000 c0414014 c0413fe0 c01914d8 bea0: 00000000 c0413fe0 df8045d0 c019109c c0413fe0 c0400bf0 c0413fd8 c018f04c bec0: 00000000 bf000000 c0413fd8 c01929a0 c0413fd8 bf000000 00000000 c0192bfc bee0: bf00009c bf000014 def6a000 c000859c 00000000 00000001 bf00009c bf00009c bf00: 00000001 bf00009c 00000001 bf0000e4 de65a600 00000001 c082d81d c0058cd0 bf20: bf0000a8 c004fbd8 c0056414 c082d815 c02aea20 bf0001f0 00b0b008 e0846208 bf40: c03ec8a0 e0846000 0000db0d e0850604 e08504de e0853a24 00000204 000002d4 bf60: 00000000 00000000 0000001c 0000001d 00000009 00000000 00000006 00000000 bf80: 00000003 f63d4e2e 0000db0d bef02ed8 00000080 c000d2e8 def6a000 00000000 bfa0: 00000000 c000d140 f63d4e2e 0000db0d 00b0b018 0000db0d 00b0b008 b6f4f298 bfc0: f63d4e2e 0000db0d bef02ed8 00000080 00000003 00000000 00010000 00000000 bfe0: 00b0b008 bef02c64 00008d20 b6ef3784 60000010 00b0b018 5a5a5a5a 5a5a5a5a [<c01b8908>] (stmmac_pltfr_remove+0x2c/0xa0) from [<c019270c>] (platform_drv_remove+0x14/0x18) [<c019270c>] (platform_drv_remove+0x14/0x18) from [<c0191478>] (__device_release_driver+0x64/0xa4) [<c0191478>] (__device_release_driver+0x64/0xa4) from [<c01914d8>] (device_release_driver+0x20/0x2c) [<c01914d8>] (device_release_driver+0x20/0x2c) from [<c019109c>] (bus_remove_device+0xcc/0xdc) [<c019109c>] (bus_remove_device+0xcc/0xdc) from [<c018f04c>] (device_del+0x104/0x160) [<c018f04c>] (device_del+0x104/0x160) from [<c01929a0>] (platform_device_del+0x18/0x58) [<c01929a0>] (platform_device_del+0x18/0x58) from [<c0192bfc>] (platform_device_unregister+0xc/0x18) [<c0192bfc>] (platform_device_unregister+0xc/0x18) from [<bf000014>] (r_init+0x14/0x2c [cdev]) [<bf000014>] (r_init+0x14/0x2c [cdev]) from [<c000859c>] (do_one_initcall+0x90/0x160) [<c000859c>] (do_one_initcall+0x90/0x160) from [<c0058cd0>] (sys_init_module+0x15c4/0x1794) [<c0058cd0>] (sys_init_module+0x15c4/0x1794) from [<c000d140>] (ret_fast_syscall+0x0/0x30) Code: e1a04000 e59f0070 eb039b65 e59636e4 (e5933040) Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01net:stmmac: Add check if mdiobus is registered in stmmac_mdio_unregisterSrinivas Kandagatla1-0/+3
This patch adds a basic check in stmmac_mdio_unregister to see if mdio bus registeration for this driver was actually sucessfull or not. Use case here is, if BSP considers using mdio-gpio bus along with stmmac driver by passing mdio_bus_data as NULL in platform data. Call to stmmac_mdio_register with mdio_bus_data as NULL returns 0, which is a considered sucessfull call form stmmac. Then again when we unload the driver we just call stmmac_mdio_unregister, this is were the actual problem is stmmac-mdio code dont really know at this instance of calling that stmmac_mdio_register was actually successful. So Adding a check in stmmac_mdio_unregister is always safe. Without this patch stmmac driver calls stmmac_mdio_register from stmmac_release which Segfaults as mii bus was never registered at the first point. Originally the this bug was found when unloading an stmmac driver instance which uses mdio-gpio for smi access. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01Merge branch 'master' of ↵David S. Miller7-41/+164
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller78-432/+769
Merge the 'net' tree to get the recent set of netfilter bug fixes in order to assist with some merge hassles Pablo is going to have to deal with for upcoming changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31ixgbevf: Cleanup handling of configuration for jumbo framesAlexander Duyck4-28/+58
This change moves the code for notifying the PF of the VF maximum packet size into the vf.c file. The main motivation behind this is that the vf.c file is supposed to contain all of the messages used when communicating with the PF. In addition it creates a separate function for setting the Rx buffer size so that we have on centralized area to review what buffer sizes will be requested by the VF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31ixgbevf: Add suspend and resume support to the VFAlexander Duyck1-4/+89
This change adds PCI suspend and resume support to ixgbevf. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31e1000e: update driver version numberBruce Allan1-1/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31e1000e: cleanup - remove unnecessary variableBruce Allan1-3/+2
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31e1000e: cleanup - remove inapplicable commentBruce Allan1-1/+1
Early Receive has been disabled in the driver so this comment is no longer applicable. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31e1000e: cleanup strict checkpatch checkBruce Allan1-1/+2
CHECK: multiple assignments should be avoided Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31e1000e: cleanup strict checkpatch MEMORY_BARRIER checksBruce Allan1-1/+9
Add comments to memory barriers per strict checkpatch. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-31e1000e: use correct type for read of 32-bit registerBruce Allan1-2/+2
The POEMB register is 32 bits, not 16. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-30bnx2x: Correct the ndo_poll_controller callMerav Sicron1-3/+5
This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30bnx2x: Move netif_napi_add to the open callMerav Sicron5-13/+10
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/fsl_pq_mdio: add support for the Fman 1G MDIO controllerTimur Tabi1-0/+9
The MDIO controller on the Frame Manager (Fman) is compatible with the QE and Gianfar MDIO controllers, but we don't care about the TBI because the Ethernet drivers (FMD) take care of programming it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/fsl-pq-mdio: coalesce multiple memory allocations into oneTimur Tabi1-28/+14
Take advantage of the new mdiobus_alloc_size() function to combine three different memory allocations into one. This also simplies the error handling. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/fsl_pq_mdio: streamline probing of MDIO nodesTimur Tabi1-152/+221
Make the device tree probe function more data-driven, so that it no longer searches the 'compatible' property more than once. The of_device_id[] array allows for per-entry private data, so we use that to store details about each type of node that the driver supports. This removes the need to check the 'compatible' property inside the probe function. The driver supports four types on MDIO devices: 1) Gianfar MDIO nodes that only map the MII registers 2) Gianfar MDIO nodes that map the full MDIO register set 3) eTSEC2 MDIO nodes (which map the full MDIO register set) 4) QE MDIO nodes (which map only the MII registers) Gianfar, eTSEC2, and QE have different mappings for the TBIPA register, which is needed to initialize the TBI PHY. In addition, the QE needs a special hack because of the way the device tree is ordered. All of this information is encapsulated in the fsl_pq_mdio_data structure, so when an MDIO node is probed, per-device data and functions are used to determine how to initialize the device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/fsl_pq_mdio: various small fixesTimur Tabi1-14/+13
1) Replace printk with dev_err 2) Fix some whitespace mistakes 3) Rename "ofdev" to "pdev", since it's a platform_device now 4) Fix an inadvertent compound statement by replacing commas with semicolons Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/fsl_pq_mdio: merge some functions togetherTimur Tabi1-66/+26
A few small functions were called only by other functions in the same file, so merge them together. One function, for example, was calculating the device address even though the caller was doing the same thing. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/fsl_pq_mdio: trim #include statementsTimur Tabi1-13/+1
Remove several unnecessary #include statements. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30net/freescale: do not export any functions from fsl_pq_mdio.cTimur Tabi4-61/+31
None of the functions in fsl_pq_mdio.c are used by any other source file, so there's no point in exporting them. Merge the header file into the source file, make all the functions static, remove any EXPORT_SYMBOL statements, and delete any #include "fsl_pq_mdio.h" statements. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30be2net: modify log msg for lack of privilege errorVasundhara Volam1-1/+1
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30be2net: fixup malloc/free of adapter->pmac_idSathya Perla1-6/+7
Free was missing and kcalloc() is better placed in be_ctrl_init() Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30be2net: fix FW default for VF tx-rateVasundhara Volam1-2/+2
BE3 FW initializes VF tx-rate to 100Mbps. Fix this to 10Gbps. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30be2net: fix max VFs reported by HWVasundhara Volam2-0/+3
BE3 FW allocates VF resources for upto 30 VFs per PF while a max value of 32 may be reported via PCI config space. Fix this in the driver. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30be2net: create RSS rings even in multi-channel configsSathya Perla1-2/+1
Changes from commit df505e were incorrectly over-written by commit 10ef9ab. Fixing the same. Change log of the original fix: Currently RSS rings are not created in a multi-channel config. RSS rings can be created on one (out of four) interfaces per port in a multi-channel config. Doing this insulates the driver from a FW bug wherin multi-channel config is wrongly reported even when not enabled. This also helps performance in a multi-channel config, as one interface per port gets RSS rings. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30drivers/ieee802154: move ieee802154 drivers to net folderalex.bluesman.smirnov@gmail.com8-4/+3
The IEEE 802.15.4 standard represents a networking protocol. I don't exactly know why drivers for this protocol are stored into the root 'driver' folder, but better will be to store them with other networking stuff. Currently there are only 3 drivers available for IEEE 802.15.4 stack, so lets do it now with the smallest overhead. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30drivers/ieee802154/at86rf230: replace the code under _init and _exit by macroalex.bluesman.smirnov@gmail.com1-11/+1
The code under _init and _exit functions is similar to the code of module_spi_driver macro, which is a wrapper to the module_driver macro, so use it instead. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Devendra Naga <develkernel412222@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-08 12:40:00 +0300