summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-08-19usb: move from strlcpy with unused retval to strscpyWolfram Sang11-18/+18
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210116.7517-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19USB: gadget: f_mass_storage: get rid of DEVICE_ATTR() usageGreg Kroah-Hartman1-3/+8
The last holdout in the drivers/usb/* tree using DEVICE_ATTR() is the f_mass_storage driver, so move it to use DEVICE_ATTR_RW() instead. The mode is overridden in the is_visible callback to set it properly depending on if this is a cdrom or removable device. Cc: Felipe Balbi <balbi@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Maxim Devaev <mdevaev@gmail.com> Cc: Wesley Cheng <quic_wcheng@quicinc.com> Cc: Neal Liu <neal_liu@aspeedtech.com> Cc: Roger Quadros <roger.quadros@nokia.com> Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220810123656.3637104-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: gadget: udc: renesas_usb3: Add support for RZ/V2MPhil Edworthy1-27/+104
RZ/V2M (r9a09g011) has a few differences: - The USB3_DRD_CON register has moved, its called USB_PERI_DRD_CON in the RZ/V2M hardware manual. It has additional bits for host and peripheral reset that need to cleared to use usb host and peripheral respectively. - The USB3_OTG_STA, USB3_OTG_INT_STA and USB3_OTG_INT_ENA registers have been moved and renamed to USB_PERI_DRD_STA, USB_PERI_DRD_INT_STA and USB_PERI_DRD_INT_E. - The IDMON bit used in the above regs for role detection have moved from bit 4 to bit 0. - RZ/V2M has an separate interrupt for DRD, i.e. for changes to IDMON. - There are reset lines for DRD and USBP - There is another clock, managed by runtime PM. Whilst the hardware can support 16 pipes, it is artifically limited based on the ram per pipe calculation. With the 4KB ram per pipe, we can support 9 pipes consisting of 4xIN pipes, 4xOUT pipes and PIPE0. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220804192220.128601-3-phil.edworthy@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage levelGene Chen1-1/+57
Fix CC PHY noise filter of voltage level according to current cc voltage level Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/20220805071714.150882-8-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: typec: tcpci: Move function "tcpci_to_typec_cc" to commonGene Chen1-22/+0
Move transition function "tcpci_to_typec_cc" to common header Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/20220805071714.150882-7-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: typec: tcpci_rt1711h: Add compatible id with rt1715Gene Chen1-9/+34
Add compatible id with rt1715, and add initial setting for specific support PD30 command. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/20220805071714.150882-6-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: typec: tcpci_rt1711h: Add initial phy settingGene Chen1-1/+14
Add initial phy setting about phy dicard retry, rx filter deglitch time and BMC-encoded wait time Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/20220805071714.150882-5-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: typec: tcpci_rt1711h: Add regulator support when source vbusGene Chen1-0/+28
Add regulator support when source vbus Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/20220805071714.150882-4-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: typec: tcpci_rt1711h: Fix vendor setting when set vconnGene Chen1-2/+4
replace overwrite whole register with update bits Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/20220805071714.150882-3-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: dwc3: qcom: clean up icc initJohan Hovold1-8/+7
Clean up the interconnect-initialisation helper by increasing indentation of (or merging) continuation lines and adding brackets around multi-line blocks in order to improve readability. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220805074500.21469-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: dwc3: qcom: only parse 'maximum-speed' onceJohan Hovold1-2/+3
Add a temporary variable to the interconnect-initialisation helper to avoid parsing and decoding the 'maximum-speed' devicetree property twice. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220805074500.21469-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: common: debug: Check non-standard control requestsThinh Nguyen1-32/+64
Previously usb_decode_ctrl() only decodes standard control requests, but it was used for non-standard requests also. If it's non-standard or unknown standard bRequest, print the Setup data values. Fixes: af32423a2d86 ("usb: dwc3: trace: decode ctrl request") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8d6a30f2f2f953eff833a5bc5aac640a4cc2fc9f.1658971571.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: dwc3: trace: add Start of Frame Number to trace eventMichael Grzeschik1-1/+2
Having the Start of Frame Number in the trace data is useful for debugging. This patch adds the (micro)frame number in which the last packet of the TRB's buffer was transmitted or received to the trace output. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220720215113.1058313-2-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: dwc3: debug: show events parameters in hexMichael Grzeschik1-2/+2
Printing the event parameters in decimal is not useful. Print them in hex and make it more practical. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220720215113.1058313-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: dwc3: gadget: conditionally remove requestsMichael Grzeschik1-6/+6
The functions stop_active_transfers and ep_disable are both calling remove_requests. This functions in both cases will giveback the requests with status ESHUTDOWN, which also represents an physical disconnection. For ep_disable this is not true. This patch adds the status parameter to remove_requests and sets the status to ECONNRESET on ep_disable. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220720213523.1055897-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19USB: host: npcm: Add NPCM8XX supportTomer Maimon1-4/+4
Modify NPCM USB EHCI host controller configuration to support all NPCM BMC SoC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20220718181842.61040-4-tmaimon77@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: host: npcm7xx: remove USB EHCI host reset sequenceTomer Maimon1-50/+0
Remove USB EHCI host controller reset sequence from NPCM7XX USB EHCI host probe function because it is done in the NPCM reset driver. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20220718181842.61040-2-tmaimon77@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: gadget: rndis: use %u instead of %d to print u32 valuesRay Hung1-1/+1
The driver uses the %d format to print u32 values. The correct format is %u. Fix it. Signed-off-by: Ray Hung <tw.rayhung@gmail.com> Link: https://lore.kernel.org/r/20220804110836.138614-1-tw.rayhung@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: typec: ucsi: stm32g0: Fix spelling mistake "booloader" -> "bootloader"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err_probe message. Fix it. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220803123018.913710-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driverChiYuan Huang3-0/+219
The MediaTek MT6370 is a highly-integrated smart power management IC, which includes a single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & Power Delivery (PD) controller, dual Flash LED current sources, a RGB LED driver, a backlight WLED driver, a display bias driver and a general LDO for portable devices. Add support for the Type-C & Power Delivery controller in MediaTek MT6370 IC. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Link: https://lore.kernel.org/r/20220815090125.27705-8-peterwu.pub@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: common: usb-conn-gpio: Simplify some error messageChristophe JAILLET1-4/+2
dev_err_probe() already prints the error code in a human readable way, so there is no need to duplicate it as a numerical value at the end of the message. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/7505a9dfa1e097070c492d6f6f84afa2a490b040.1659763173.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-14Merge tag 'for-linus-6.0-rc1b-tag' of ↵Linus Torvalds5-24/+59
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
2022-08-14Merge tag 'i2c-for-5.20-part2' of ↵Linus Torvalds51-54/+99
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - two driver fixes for issues introduced this cycle - one trivial driver improvement regarding ACPI - more DTS conversion and additions - documentation updates - subsystem-wide move from strlcpy to strscpy * tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: i2c-sysfs: fix hyperlinks docs: i2c: i2c-sysfs: improve wording docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks docs: i2c: smbus-protocol: improve DataLow/DataHigh definition docs: i2c: i2c-protocol: remove unused legend items docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words docs: i2c: i2c-protocol: update introductory paragraph i2c: move core from strlcpy to strscpy i2c: move drivers from strlcpy to strscpy i2c: kempld: Support ACPI I2C device declaration i2c: mediatek: add i2c compatible for MT8188 dt-bindings: i2c: update bindings for mt8188 soc i2c: microchip-corei2c: fix erroneous late ack send dt-bindings: i2c: qcom,i2c-cci: convert to dtschema i2c: qcom-geni: Fix GPI DMA buffer sync-back
2022-08-14Merge tag 'ntb-5.20' of https://github.com/jonmason/ntbLinus Torvalds10-25/+1523
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
2022-08-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds18-97/+117
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and trivial updates. The major new core update is a change to the way device, target and host reference counting is done to try to make it more robust (this change has soaked for a while to try to winkle out any bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix typo 'the the' in comment scsi: megaraid_sas: Remove redundant variable cmd_type scsi: FlashPoint: Remove redundant variable bm_int_st scsi: zfcp: Fix missing auto port scan and thus missing target ports scsi: core: Call blk_mq_free_tag_set() earlier scsi: core: Simplify LLD module reference counting scsi: core: Make sure that hosts outlive targets scsi: core: Make sure that targets outlive devices scsi: ufs: ufs-pci: Correct check for RESET DSM scsi: target: core: De-RCU of se_lun and se_lun acl scsi: target: core: Fix race during ACL removal scsi: ufs: core: Correct ufshcd_shutdown() flow scsi: ufs: core: Increase the maximum data buffer size scsi: lpfc: Check the return value of alloc_workqueue()
2022-08-13Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-blockLinus Torvalds5-4/+18
Pull block fixes from Jens Axboe: - NVMe pull request - print nvme connect Linux error codes properly (Amit Engel) - fix the fc_appid_store return value (Christoph Hellwig) - fix a typo in an error message (Christophe JAILLET) - add another non-unique identifier quirk (Dennis P. Kliem) - check if the queue is allocated before stopping it in nvme-tcp (Maurizio Lombardi) - restart admin queue if the caller needs to restart queue in nvme-fc (Ming Lei) - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu) - __alloc_disk_node() error handling fix (Rafael) * tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block: block: Do not call blk_put_queue() if gendisk allocation fails nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 nvme-tcp: check if the queue is allocated before stopping it nvme-fabrics: Fix a typo in an error message nvme-fabrics: parse nvme connect Linux error codes nvmet-auth: use kmemdup instead of kmalloc + memcpy nvme-fc: fix the fc_appid_store return value nvme-fc: restart admin queue if the caller needs to restart queue
2022-08-13Merge tag 'riscv-for-linus-5.20-mw2' of ↵Linus Torvalds4-23/+50
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "There's still a handful of new features in here, but there are a lot of fixes/cleanups as well: - Support for the Zicbom extension for explicit cache-block management, along with the necessary bits to make the non-standard cache management ops on the Allwinner D1 function - Support for the Zihintpause extension, which codifies a go-slow instruction used for cpu_relax() - Support for the Sstc extension for supervisor-mode timer/counter management - Many device tree fixes and cleanups, including a large set for the Canaan device trees - A handful of fixes and cleanups for the PMU driver" * tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits) dt-bindings: gpio: sifive: add gpio-line-names wireguard: selftests: set CONFIG_NONPORTABLE on riscv32 RISC-V: KVM: Support sstc extension RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details riscv:uprobe fix SR_SPIE set/clear handling dt-bindings: riscv: fix SiFive l2-cache's cache-sets riscv: ensure cpu_ops_sbi is declared RISC-V: cpu_ops_spinwait.c should include head.h RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h> riscv: dts: starfive: correct number of external interrupts riscv: dts: sifive unmatched: Add PWM controlled LEDs riscv/purgatory: Omit use of bin2c riscv/purgatory: hard-code obj-y in Makefile ...
2022-08-13Merge tag 'rtc-6.0' of ↵Linus Torvalds39-506/+1846
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "New drivers: - Microchip PolarFire - Nuvoton NCT3018Y - TI K3 RTC Subsystem: - Replace flush_scheduled_work() with flush_work() - Remove deprecated ida_simple_get()/ida_simple_remove() calls Drivers: - use simple i2c probe where possible - sun6i: add R329 support - zynqmp: add calibration support - vr41xx: remove unused driver" * tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: spear: set range max rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 rtc: zynqmp: initialize fract_tick rtc: Add NCT3018Y real time clock driver dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock dt-bindings: rtc: nxp,pcf85063: Convert to DT schema dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt' rtc: rx8025: fix 12/24 hour mode detection on RX-8035 rtc: cros-ec: Only warn once in .remove() about notifier_chain problems rtc: vr41xx: remove driver rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler() rtc: rv8803: fix missing unlock on error in rv8803_set_time() rtc: zynqmp: Add calibration set and get support rtc: zynqmp: Updated calibration value dt-bindings: rtc: zynqmp: Add clock information rtc: sun6i: add support for R329 RTC rtc: Directly use ida_alloc()/free() rtc: Introduce ti-k3-rtc dt-bindings: rtc: Add TI K3 RTC description dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section ...
2022-08-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds33-510/+1971
Pull virtio updates from Michael Tsirkin: - A huge patchset supporting vq resize using the new vq reset capability - Features, fixes, and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits) vdpa/mlx5: Fix possible uninitialized return value vdpa_sim_blk: add support for discard and write-zeroes vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests vdpa_sim_blk: check if sector is 0 for commands other than read or write vdpa_sim: Implement suspend vdpa op vhost-vdpa: uAPI to suspend the device vhost-vdpa: introduce SUSPEND backend feature bit vdpa: Add suspend operation virtio-blk: Avoid use-after-free on suspend/resume virtio_vdpa: support the arg sizes of find_vqs() vhost-vdpa: Call ida_simple_remove() when failed vDPA: fix 'cast to restricted le16' warnings in vdpa.c vDPA: !FEATURES_OK should not block querying device config space vDPA/ifcvf: support userspace to query features and MQ of a management device vDPA/ifcvf: get_config_size should return a value no greater than dev implementation vhost scsi: Allow user to control num virtqueues vhost-scsi: Fix max number of virtqueues vdpa/mlx5: Support different address spaces for control and data vdpa/mlx5: Implement susupend virtqueue callback ...
2022-08-12Merge tag 'for-v6.0' of ↵Linus Torvalds17-595/+334
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "No core patches, only driver updates: - pwr-mlxbf: new reset driver for Mellanox BlueField - at91-reset: SAMA7G5 support - ab8500: continue refurbishing - misc minor fixes" * tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits) power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind power: supply: ab8500: Remove flush_scheduled_work() call. power: supply: ab8500_fg: drop duplicated 'is' in comment power: supply: ab8500: Drop external charger leftovers power: supply: ab8500: Add MAINTAINERS entry dt-bindings: power: reset: qcom,pshold: convert to dtschema power: supply: Fix typo in power_supply_check_supplies power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables power: reset: pwr-mlxbf: add missing include power: reset: at91-reset: add support for SAMA7G5 power: reset: at91-reset: add reset_controller_dev support power: reset: at91-reset: add at91_reset_data power: reset: at91-reset: document structures and enums dt-bindings: reset: add sama7g5 definitions dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings dt-bindings: reset: convert Atmel/Microchip reset controller to YAML power: reset: pwr-mlxbf: add BlueField SoC power control driver power: supply: ab8500: Exit maintenance if too low voltage power: supply: ab8500: Respect charge_restart_voltage_uv ...
2022-08-12Merge tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfioLinus Torvalds2-0/+2
Pull another VFIO update from Alex Williamson: - Rename vfio source file to more easily allow additional source files in the upcoming development cycles (Jason Gunthorpe) * tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfio: vfio: Move vfio.c to vfio_main.c
2022-08-12perf: riscv_pmu{,_sbi}: Miscallenous improvement & fixesPalmer Dabbelt2-15/+16
A series of mostly-independent fixes and cleanups for the RISC-V PMU drivers. Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2 * palmer/riscv-pmu: RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32
2022-08-12xen/pciback: Fix comment typoJason Wang1-1/+1
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220811120918.17961-1-wangborong@cdjrlc.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen/xenbus: fix return type in xenbus_file_read()Dan Carpenter1-2/+2
This code tries to store -EFAULT in an unsigned int. The xenbus_file_read() function returns type ssize_t so the negative value is returned as a positive value to the user. This change forces another change to the min() macro. Originally, the min() macro used "unsigned" type which checkpatch complains about. Also unsigned type would break if "len" were not capped at MAX_RW_COUNT. Use size_t for the min(). (No effect on runtime for the min_t() change). Fixes: 2fb3683e7b16 ("xen: Add xenbus device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen-blkfront: Apply 'feature_persistent' parameter when connectSeongJae Park1-3/+1
In some use cases[1], the backend is created while the frontend doesn't support the persistent grants feature, but later the frontend can be changed to support the feature and reconnect. In the past, 'blkback' enabled the persistent grants feature since it unconditionally checked if frontend supports the persistent grants feature for every connect ('connect_ring()') and decided whether it should use persistent grans or not. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has mistakenly changed the behavior. It made the frontend feature support check to not be repeated once it shown the 'feature_persistent' as 'false', or the frontend doesn't support persistent grants. Similar behavioral change has made on 'blkfront' by commit 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants"). This commit changes the behavior of the parameter to make effect for every connect, so that the previous behavior of 'blkfront' can be restored. [1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/ Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen-blkback: Apply 'feature_persistent' parameter when connectMaximilian Heyne1-6/+3
In some use cases[1], the backend is created while the frontend doesn't support the persistent grants feature, but later the frontend can be changed to support the feature and reconnect. In the past, 'blkback' enabled the persistent grants feature since it unconditionally checked if frontend supports the persistent grants feature for every connect ('connect_ring()') and decided whether it should use persistent grans or not. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has mistakenly changed the behavior. It made the frontend feature support check to not be repeated once it shown the 'feature_persistent' as 'false', or the frontend doesn't support persistent grants. This commit changes the behavior of the parameter to make effect for every connect, so that the previous workflow can work again as expected. [1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/ Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com> Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen-blkback: fix persistent grants negotiationSeongJae Park1-8/+7
Persistent grants feature can be used only when both backend and the frontend supports the feature. The feature was always supported by 'blkback', but commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has introduced a parameter for disabling it runtime. To avoid the parameter be updated while being used by 'blkback', the commit caches the parameter into 'vbd->feature_gnt_persistent' in 'xen_vbd_create()', and then check if the guest also supports the feature and finally updates the field in 'connect_ring()'. However, 'connect_ring()' could be called before 'xen_vbd_create()', so later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to 'vbd->feature_gnt_persistent'. As a result, 'blkback' could try to use 'persistent grants' feature even if the guest doesn't support the feature. This commit fixes the issue by moving the parameter value caching to 'xen_blkif_alloc()', which allocates the 'blkif'. Because the struct embeds 'vbd' object, which will be used by 'connect_ring()' later, this should be called before 'connect_ring()' and therefore this should be the right and safe place to do the caching. Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12x86/xen: Add support for HVMOP_set_evtchn_upcall_vectorJane Malalane1-6/+47
Implement support for the HVMOP_set_evtchn_upcall_vector hypercall in order to set the per-vCPU event channel vector callback on Linux and use it in preference of HVM_PARAM_CALLBACK_IRQ. If the per-VCPU vector setup is successful on BSP, use this method for the APs. If not, fallback to the global vector-type callback. Also register callback_irq at per-vCPU event channel setup to trick toolstack to think the domain is enlightened. Suggested-by: "Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by: Jane Malalane <jane.malalane@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220729070416.23306-1-jane.malalane@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12Merge tag 'for-6.0/dm-fixes' of ↵Linus Torvalds3-10/+27
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - A few fixes for the DM verity and bufio changes in this merge window - A smatch warning fix for DM writecache locking in writecache_map * tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: fix some cases where the code sleeps with spinlock held dm writecache: fix smatch warning about invalid return from writecache_map dm verity: fix verity_parse_opt_args parsing dm verity: fix DM_VERITY_OPTS_MAX value yet again dm bufio: simplify DM_BUFIO_CLIENT_NO_SLEEP locking
2022-08-12Merge tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-2/+3
Pull drm fixes from Dave Airlie: "Not much to squeeze into rc1, just two small fixes, one for core gem and one for shmem-helpers: gem: - Annotate WW context in error paths shmem-helper: - Add missing vunmap in error paths" * tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm: drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error drm/shmem-helper: Add missing vunmap on error
2022-08-12RISC-V: Move counter info definition to sbi header fileAtish Patra1-14/+0
Counter info encoding format is defined by the SBI specificaiton. KVM implementation of SBI PMU extension will also leverage this definition. Move the definition to common sbi header file from the sbi pmu driver. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Fix SBI PMU calls for RV32Atish Patra1-0/+10
Some of the SBI PMU calls does not pass 64bit arguments correctly and not under RV32 compile time flags. Currently, this doesn't create any incorrect results as RV64 ignores any value in the additional register and qemu doesn't support raw events. Fix those SBI calls in order to set correct values for RV32. Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Atish Patra <atishp@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-4-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Update user page mapping only once during startAtish Patra2-1/+1
Currently, riscv_pmu_event_set_period updates the userpage mapping. However, the caller of riscv_pmu_event_set_period should update the userpage mapping because the counter can not be updated/started from set_period function in counter overflow path. Invoke the perf_event_update_userpage at the caller so that it doesn't get invoked twice during counter start path. Fixes: f5bfa23f576f ("RISC-V: Add a perf core library for pmu drivers") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-3-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Fix counter restart during overflow for RV32Atish Patra1-0/+5
Pass the upper half of the initial value of the counter correctly for RV32. Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support") Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-2-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12RISC-V: Add Sstc extension supportPalmer Dabbelt1-1/+24
This series implements Sstc extension support which was ratified recently. Before the Sstc extension, an SBI call is necessary to generate timer interrupts as only M-mode have access to the timecompare registers. Thus, there is significant latency to generate timer interrupts at kernel. For virtualized enviornments, its even worse as the KVM handles the SBI call and uses a software timer to emulate the timecomapre register. Sstc extension solves both these problems by defining a stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to program a timer and recieve interrupt without supervisor execution enviornment (M-mode/HS mode) intervention. * palmer/riscv-sstc: RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details
2022-08-12RISC-V: Prefer sstc extension if availableAtish Patra1-1/+24
RISC-V ISA has sstc extension which allows updating the next clock event via a CSR (stimecmp) instead of an SBI call. This should happen dynamically if sstc extension is available. Otherwise, it will fallback to SBI call to maintain backward compatibility. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220722165047.519994-4-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12i2c: move core from strlcpy to strscpyWolfram Sang2-2/+2
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no code used the return value. It has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-12i2c: move drivers from strlcpy to strscpyWolfram Sang47-49/+49
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no driver used the return value and has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-12i2c: kempld: Support ACPI I2C device declarationChris Pringle1-0/+1
Adds an ACPI companion to the KEMPLD I2C driver so that it correctly detects any I2C devices nested under the KEMPLD's ACPI node (SBRG.CPLD). This allows I2C devices attached to the KEMPLD I2C adapter to be declared and instantiated via ACPI. Signed-off-by: Chris Pringle <chris.pringle@phabrix.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-12i2c: mediatek: add i2c compatible for MT8188Kewei Xu1-0/+43
Add i2c compatible for MT8188 and added mt_i2c_regs_v3[], since MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94. Signed-off-by: Kewei Xu <kewei.xu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-08 06:28:39 +0300