summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14PCI: Add Altera vendor IDJohannes Thumshirn2-3/+0
Add the Altera PCI Vendor id to pci_ids.h and remove the private definitions from xillybus_pcie.c and altera-cvp.c. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Eli Billauer <eli.billauer@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Eli Billauer <eli.billauer@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: core: Add check for master property no-scan-on-initChristopher Bostic1-1/+4
Prior to scanning a master check if the optional property no-scan-on-init is present. If it is then avoid scanning. This is necessary in cases where a master scan could interfere with another FSI master on the same bus. Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: master: Clarify master lifetimes & fix use-after-free in hub masterJeremy Kerr2-3/+33
Once we call fsi_master_unregister, the core will put_device, potentially freeing the hub master. This change adds a comment explaining the lifetime of an allocated fsi_master. We then add a reference from the driver to the hub master, so it stays around until we've finished ->remove(). Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Tested-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: core: Reduce console output during normal scanChristopher Bostic2-3/+3
To reduce amount of console output during boot / power up make all normal path scan related messages debug type. Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: Match fsi slaves and engines to available dt nodesJeremy Kerr4-0/+108
This change populates device tree nodes for scanned FSI slaves and engines. If the master populates ->of_node of the FSI master device, we'll look for matching slaves, and under those slaves we'll look for matching engines. This means that FSI drivers will have their ->of_node pointer populated if there's a corresponding DT node, which they can use for further device discover. Presence of device tree nodes is optional, and only required for fsi device drivers that need extra properties, or subordinate devices, to be enumerated. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: Fix one and two byte bus reads/writesEddie James1-4/+7
Address checker fixed to allow one and two byte reads/writes. Address alignments for each size verified. Signed-off-by: Edward James <eajames@us.ibm.com> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: master-gpio: Add external modeJeremy Kerr1-2/+76
This change introduces an 'external mode' for GPIO-based FSI masters, allowing the clock and data lines to be driven by an external source. For example, external mode is selected by a user when an external debug device is attached to the FSI pins. To do this, we need to set specific states for the trans, mux and enable GPIOs, and prevent access to clk & data from the FSI core code (by returning EBUSY). External mode is controlled by a sysfs attribute, so add the relevant information to Documentation/ABI/ Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: master-gpio: Add locking during break and link enableJeremy Kerr1-0/+7
Currently, we perform GPIO accesses in fsi_master_gpio_break and fsi_master_link_enable, without holding cmd_lock. This change adds the appropriate locking. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Christopher Bostic <clbostic@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14fsi: Add fsi_master_rescan()Jeremy Kerr2-2/+10
We'll want non-core fsi code to trigger a rescan, so introduce a non-static fsi_master_rescan() function. Use this for the existing unscan/scan behaviour too. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Christopher Bostic <clbostic@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14coresight: etm4x: Fix bit shiftingBo Yan1-2/+2
ctxid_pid and vmid_val in config are of type u64. When an integer 0xFF is being left shifted more than 32 bits, the behavior is undefined. The fix is to specify 0xFF as an unsigned long. Detected by Coverity scan: CID 37650, 37651 (Bad bit shift operation) Signed-off-by: Bo Yan <byan@nvidia.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14coresight: Use %px to print pcsr instead of %pLeo Yan1-1/+1
Commit ad67b74d2469 ("printk: hash addresses printed with %p") lets printk specifier %p to hash all addresses before printing, this was resulting in the high 32 bits of pcsr can only output zeros. So module cannot completely print pc value and it's pointless for debugging purpose. This patch fixes this by using %px to print pcsr instead. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Replace short License header by SPDX identifierAndy Shevchenko1-7/+1
No functional changes involved. Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Sort headers alphabeticallyAndy Shevchenko1-5/+5
While here, remove init.h inclusion since we are not using it directly and module.h will do this for us. No functional changes intended. Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Switch to use module_pci_driver() macroAndy Shevchenko1-15/+1
Eliminate some boilerplate code by using module_pci_driver() instead of init/exit, moving the salient bits from init into probe. Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Convert printk(KERN_WARN) to dev_warn()Andy Shevchenko1-6/+5
dev_warn() will print device name with associated driver, no need to keep this open coded. While here, adjust indentation in the rest of dev_dbg() calls. Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Don't shadow error codes in ->probe()Andy Shevchenko1-6/+6
When ->probe() calls helper functions return theirs error codes instead of shadowing them. Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Convert to use managed functions pcim_* and devm_*Andy Shevchenko1-10/+5
This makes the error handling much more simpler than open-coding everything and in addition makes the probe function smaller an tidier. Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: PCI core handles power state for usAndy Shevchenko1-28/+12
There is no need to repeat the work that is already done in the PCI driver core. The patch removes excerpts from suspend and resume callbacks. Note that there is no more calls performed to enable or disable a PCI device during suspend-resume cycle. Nowadays they seems to be superflous. Someone can read more in [1]. While here, convert calls to new driver API. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-319-330.pdf Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: Add support for BrainBoxes PX272/PX306 MIO cardAndy Shevchenko1-0/+12
This adds support for BrainBoxes Multi I/O cards (4+1 serial + 1 parallel port): 02:00.0 0702: 135a:4100 (rev 02) Subsystem: 135a:0443 Flags: fast devsel, IRQ 18 Memory at f7d02000 (32-bit, non-prefetchable) [size=128] I/O ports at e000 [size=128] I/O ports at e080 [size=64] I/O ports at e0c0 [size=16] Memory at f7d01000 (32-bit, non-prefetchable) [size=128] Memory at f7d00000 (32-bit, non-prefetchable) [size=128] Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [78] Power Management version 3 Capabilities: [80] Express Legacy Endpoint, MSI 01 Capabilities: [100] Virtual Channel Capabilities: [800] Advanced Error Reporting Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: ax88796: Delete an unnecessary variable initialisation in ↵Markus Elfring1-1/+1
parport_ax88796_probe() The local variable "pp" will eventually be set to an appropriate pointer a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: ax88796: Improve a size determination in parport_ax88796_probe()Markus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport: ax88796: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+1
parport_ax88796_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14pps: generator: use new parport device modelSudip Mukherjee1-3/+9
Modify pps generator driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14pps: client: use new parport device modelSudip Mukherjee1-3/+18
Modify pps client driver to use the new parallel port device model. In that process, added an index to mention the device number when we have more than one parallel port. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14parport_pc: Add support for WCH CH382L PCI-E single parallel port card.Alexander Gerasiov1-0/+4
WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 but serial ports are not soldered on board. Detected as Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850]) Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14w1: use put_device() if device_register() failArvind Yadav1-0/+1
If device_register() returned an error! Always use put_device() to give up the reference initialized in device_register(). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-07lkdtm: Add missing SPDX-License-Identifier lineKees Cook1-0/+1
The refcount.c file missed the mass-addition of the SPDX lines. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-07lkdtm: Relocate code to subdirectoryKees Cook10-19/+21
The LKDTM modules keep expanding, and it's getting weird to have each file get a prefix. Instead, move to a subdirectory for cleaner handling. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06uio_hv_generic: support sub-channelsStephen Hemminger1-0/+89
Use sysfs to allow supporting sub-channels. The userspace application makes request to host to create sub-channels and the UIO kernel driver populates the sysfs per-channel directory with a binary attribute file that can be used to read/write ring. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hv_balloon: trace post_statusVitaly Kuznetsov3-0/+55
Hyper-V balloon driver makes non-trivial calculations to convert Linux's representation of free/used memory to what Hyper-V host expects to see. Add a tracepoint to see what's being sent and where the data comes from. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hv_balloon: fix bugs in num_pages_onlined accountingVitaly Kuznetsov1-13/+69
Our num_pages_onlined accounting is buggy: 1) In case we're offlining a memory block which was present at boot (e.g. when there was no hotplug at all) we subtract 32k from 0 and as num_pages_onlined is unsigned get a very big positive number. 2) Commit 6df8d9aaf3af ("Drivers: hv: balloon: Correctly update onlined page count") made num_pages_onlined counter accurate on onlining but totally incorrect on offlining for partly populated regions: no matter how many pages were onlined and what was actually added to num_pages_onlined counter we always subtract the full region (32k) so again, num_pages_onlined can wrap around zero. By onlining/offlining the same partly populated region multiple times we can make the situation worse. Solve these issues by doing accurate accounting on offlining: walk HAS list, check for covered range and gaps. Fixes: 6df8d9aaf3af ("Drivers: hv: balloon: Correctly update onlined page count") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hv_balloon: simplify hv_online_page()/hv_page_online_one()Vitaly Kuznetsov1-22/+5
Instead of doing pfn_to_page() and continuosly casting page to unsigned long just cache the pfn of the page with page_to_pfn(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hv_balloon: fix printk loglevelVitaly Kuznetsov1-6/+6
We have a mix of different ideas of which loglevel should be used. Unify on the following: - pr_info() for normal operation - pr_warn() for 'strange' host behavior - pr_err() for all errors. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06Drivers: hv: vmbus: Implement Direct Mode for stimer0Michael Kelley2-4/+59
The 2016 version of Hyper-V offers the option to operate the guest VM per-vcpu stimer's in Direct Mode, which means the timer interupts on its own vector rather than queueing a VMbus message. Direct Mode reduces timer processing overhead in both the hypervisor and the guest, and avoids having timer interrupts pollute the VMbus interrupt stream for the synthetic NIC and storage. This patch enables Direct Mode by default on stimer0 when running on a version of Hyper-V that supports it. In prep for coming support of Hyper-V on ARM64, the arch independent portion of the code contains calls to routines that will be populated on ARM64 but are not needed and do nothing on x86. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hv_vmbus: Correct the stale comments regarding cpu affinityHaiyang Zhang1-4/+2
The comments doesn't match what the current code does, also have a typo. This patch corrects them. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hv: Synthetic typo correctionJoe Perches1-1/+1
Just a trivial tyop fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06hyper-v: use GFP_KERNEL for hv_context.hv_numa_mapJia-Ju Bai1-1/+1
The kzalloc function is called with GFP_ATOMIC. But according to driver call graph, it is not in atomic context, namely no spinlock is held nor in an interrupt handler. This GFP_ATOMIC is unnecessary, and replace with GFP_KERNEL. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of fixes from the timer departement: - Add a missing timer wheel clock forward when migrating timers off a unplugged CPU to prevent operating on a stale clock base and missing timer deadlines. - Use the proper shift count to extract data from a register value to prevent evaluating unrelated bits - Make the error return check in the FSL timer driver work correctly. Checking an unsigned variable for less than zero does not really work well. - Clarify the confusing comments in the ARC timer code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Forward timer base before migrating timers clocksource/drivers/arc_timer: Update some comments clocksource/drivers/mips-gic-timer: Use correct shift count to extract data clocksource/drivers/fsl_ftm_timer: Fix error return checking
2018-03-04Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A driver fix and a documentation fix (which makes dependency handling for the next cycle easier)" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: octeon: Prevent error message on bus error dt-bindings: at24: sort manufacturers alphabetically
2018-03-04Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds3-11/+16
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A 4.16 regression fix, three fixes for -stable, and a cleanup fix: - During the merge window support for the new ACPI NVDIMM Platform Capabilities structure disabled support for "deep flush", a force-unit- access like mechanism for persistent memory. Restore that mechanism. - VFIO like RDMA is yet one more memory registration / pinning interface that is incompatible with Filesystem-DAX. Disable long term pins of Filesystem-DAX mappings via VFIO. - The Filesystem-DAX detection to prevent long terms pins mistakenly also disabled Device-DAX pins which are not subject to the same block- map collision concerns. - Similar to the setup path, softlockup warnings can trigger in the shutdown path for large persistent memory namespaces. Teach for_each_device_pfn() to perform cond_resched() in all cases. - Boaz noticed that the might_sleep() in dax_direct_access() is stale as of the v4.15 kernel. These have received a build success notification from the 0day robot, and the longterm pin fixes have appeared in -next. However, I recently rebased the tree to remove some other fixes that need to be reworked after review feedback. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: memremap: fix softlockup reports at teardown libnvdimm: re-enable deep flush for pmem devices via fsync() vfio: disable filesystem-dax page pinning dax: fix vma_is_fsdax() helper dax: ->direct_access does not sleep anymore
2018-03-03Merge tag 'media/v4.16-3' of ↵Linus Torvalds17-160/+241
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some build fixes with randconfigs - an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the right version during probe (with can happen if the hardware hangs) - a potential out of array bounds reference in tvp5150 - some fixes and improvements in the DVB memory mapped API (added for kernel 4.16) * tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vb2: Makefile: place vb2-trace together with vb2-core media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array media: dvb: update buffer mmaped flags and frame counter media: dvb: add continuity error indicators for memory mapped buffers media: dmxdev: Fix the logic that enables DMA mmap support media: dmxdev: fix error code for invalid ioctls media: m88ds3103: don't call a non-initalized function media: au0828: add VIDEO_V4L2 dependency media: dvb: fix DVB_MMAP dependency media: dvb: fix DVB_MMAP symbol name media: videobuf2: fix build issues with vb2-trace media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part
2018-03-03Merge tag 'linux-watchdog-4.16-fixes-1' of ↵Linus Torvalds1-0/+4
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - rave-sp: add NVMEM dependency - build fixes for i6300esb_wdt, xen_wdt and sp5100_tco * tag 'linux-watchdog-4.16-fixes-1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco.c: fix potential build failure watchdog: xen_wdt: fix potential build failure watchdog: i6300esb: fix build failure watchdog: rave-sp: add NVMEM dependency
2018-03-03libnvdimm: re-enable deep flush for pmem devices via fsync()Dave Jiang1-2/+1
Re-enable deep flush so that users always have a way to be sure that a write makes it all the way out to media. Writes from the PMEM driver always arrive at the NVDIMM since movnt is used to bypass the cache, and the driver relies on the ADR (Asynchronous DRAM Refresh) mechanism to flush write buffers on power failure. The Deep Flush mechanism is there to explicitly write buffers to protect against (rare) ADR failure. This change prevents a regression in deep flush behavior so that applications can continue to depend on fsync() as a mechanism to trigger deep flush in the filesystem-DAX case. Fixes: 06e8ccdab15f4 ("acpi: nfit: Add support for detect platform CPU cache...") Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-03vfio: disable filesystem-dax page pinningDan Williams1-3/+15
Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> Reported-by: Haozhong Zhang <haozhong.zhang@intel.com> Tested-by: Haozhong Zhang <haozhong.zhang@intel.com> Fixes: d475c6346a38 ("dax,ext2: replace XIP read and write with DAX I/O") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-03Merge tag 'pci-v4.16-fixes-2' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Update pci.ids location (documentation only) (Randy Dunlap) - Fix a crash when BIOS didn't assign a BAR and we try to enlarge it (Christian König) * tag 'pci-v4.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Allow release of resources that were never assigned PCI: Update location of pci.ids file
2018-03-02Merge tag 'for-linus-4.16a-rc4-tag' of ↵Linus Torvalds4-7/+17
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Five minor fixes for Xen-specific drivers" * tag 'for-linus-4.16a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: 64-bit align flags x86/xen: add tty0 and hvc0 as preferred consoles for dom0 xen-netfront: Fix hang on device removal xen/pirq: fix error path cleanup when binding MSIs xen/pvcalls: fix null pointer dereference on map->sock
2018-03-02Merge tag 'for-linus-20180302' of git://git.kernel.dk/linux-blockLinus Torvalds19-35/+40
Pull block fixes from Jens Axboe: "A collection of fixes for this series. This is a little larger than usual at this time, but that's mainly because I was out on vacation last week. Nothing in here is major in any way, it's just two weeks of fixes. This contains: - NVMe pull from Keith, with a set of fixes from the usual suspects. - mq-deadline zone unlock fix from Damien, fixing an issue with the SMR zone locking added for 4.16. - two bcache fixes sent in by Michael, with changes from Coly and Tang. - comment typo fix from Eric for blktrace. - return-value error handling fix for nbd, from Gustavo. - fix a direct-io case where we don't defer to a completion handler, making us sleep from IRQ device completion. From Jan. - a small series from Jan fixing up holes around handling of bdev references. - small set of regression fixes from Jiufei, mostly fixing problems around the gendisk pointer -> partition index change. - regression fix from Ming, fixing a boundary issue with the discard page cache invalidation. - two-patch series from Ming, fixing both a core blk-mq-sched and kyber issue around token freeing on a requeue condition" * tag 'for-linus-20180302' of git://git.kernel.dk/linux-block: (24 commits) block: fix a typo block: display the correct diskname for bio block: fix the count of PGPGOUT for WRITE_SAME mq-deadline: Make sure to always unlock zones nvmet: fix PSDT field check in command format nvme-multipath: fix sysfs dangerously created links nbd: fix return value in error handling path bcache: fix kcrashes with fio in RAID5 backend dev bcache: correct flash only vols (check all uuids) blktrace_api.h: fix comment for struct blk_user_trace_setup blockdev: Avoid two active bdev inodes for one device genhd: Fix BUG in blkdev_open() genhd: Fix use after free in __blkdev_get() genhd: Add helper put_disk_and_module() genhd: Rename get_disk() to get_disk_and_module() genhd: Fix leaked module reference for NVME devices direct-io: Fix sleep in atomic due to sync AIO nvme-pci: Fix nvme queue cleanup if IRQ setup fails block: kyber: fix domain token leak during requeue blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch ...
2018-03-02Merge tag 'mmc-v4.16-rc3' of ↵Linus Torvalds8-38/+94
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - mmc: core: Avoid hang when claiming host MMC host: - dw_mmc: Avoid hang when accessing registers - dw_mmc: Fix out-of-bounds access for slot's caps - dw_mmc-k3: Fix out-of-bounds access through DT alias - sdhci-pci: Fix S0i3 for Intel BYT-based controllers" * tag 'mmc-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Avoid hanging to claim host for mmc via some nested calls mmc: dw_mmc: Avoid accessing registers in runtime suspended state mmc: dw_mmc: Fix out-of-bounds access for slot's caps mmc: dw_mmc: Factor out dw_mci_init_slot_caps mmc: dw_mmc-k3: Fix out-of-bounds access through DT alias mmc: sdhci-pci: Fix S0i3 for Intel BYT-based controllers
2018-03-02Merge tag 'pm-4.16-rc4' of ↵Linus Torvalds3-8/+22
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three issues in cpufreq drivers: one recent regression, one leftover Kconfig dependency and one old but "stable" material. Specifics: - Make the task scheduler load and utilization signals be frequency-invariant again after recent changes in the SCPI cpufreq driver (Dietmar Eggemann). - Drop an unnecessary leftover Kconfig dependency from the SCPI cpufreq driver (Sudeep Holla). - Fix the initialization of the s3c24xx cpufreq driver (Viresh Kumar)" * tag 'pm-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() cpufreq: scpi: Fix incorrect arm_big_little config dependency cpufreq: scpi: invoke frequency-invariance setter function
2018-03-02i2c: octeon: Prevent error message on bus errorJan Glauber2-1/+2
The error message: [Fri Feb 16 13:42:13 2018] i2c-thunderx 0000:01:09.4: unhandled state: 0 is mis-leading as state 0 (bus error) is not an unknown state. Return -EIO as before but avoid printing the message. Also rename STAT_ERROR to STATE_BUS_ERROR. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-09 20:03:19 +0300