Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
|
|
The driver uses __napi_schedule_irqoff() which is fine as long as it is
invoked with disabled interrupts by everybody. Since the commit
mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq
context. This may lead to list corruption if another driver uses
__napi_schedule_irqoff() in IRQ context.
Use __napi_schedule() which safe to use from IRQ and softirq context.
Fixes: 85b85c853401d ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following sparse warning:
drivers/isdn/hardware/mISDN/mISDNisar.c:746:12: warning: symbol 'dmril'
was not declared. Should it be static?
drivers/isdn/hardware/mISDN/mISDNisar.c:749:12: warning: symbol 'dmrim'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit bfcb813203e619a8960a819bf533ad2a108d8105 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.
Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.
Fixes: eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN
Control register must be set to Consistent to let tagged frames pass
through as is, otherwise their tags will be stripped.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ceph fixes from Ilya Dryomov:
- a set of patches for a deadlock on "rbd map" error path
- a fix for invalid pointer dereference and uninitialized variable use
on asynchronous create and unlink error paths.
* tag 'ceph-for-5.7-rc2' of git://github.com/ceph/ceph-client:
ceph: fix potential bad pointer deref in async dirops cb's
rbd: don't mess with a page vector in rbd_notify_op_lock()
rbd: don't test rbd_dev->opts in rbd_dev_image_release()
rbd: call rbd_dev_unprobe() after unwatching and flushing notifies
rbd: avoid a deadlock on header_rwsem when flushing notifies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes, including the boot failure regression caused by the
BSS section not being cleared by the loaders"
* tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Revert struct layout change to fix kexec boot regression
efi/x86: Don't remap text<->rodata gap read-only for mixed mode
efi/x86: Fix the deletion of variables in mixed mode
efi/libstub/file: Merge file name buffers to reduce stack usage
Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements
efi/arm: Deal with ADR going out of range in efi_enter_kernel()
efi/x86: Always relocate the kernel for EFI handover entry
efi/x86: Move efi stub globals from .bss to .data
efi/libstub/x86: Remove redundant assignment to pointer hdr
efi/cper: Use scnprintf() for avoiding potential buffer overflow
|
|
Fix the following sparse warning:
drivers/net/ethernet/dec/tulip/tulip_core.c:1280:28: warning: symbol
'early_486_chipsets' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To rehash a previous explanation given in commit 1c44ce560b4d ("net:
mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is
up"), the switch driver operates the in a mode where a single VLAN can
be transmitted as untagged on a particular egress port. That is the
"native VLAN on trunk port" use case.
The configuration for this native VLAN is driven in 2 ways:
- Set the egress port rewriter to strip the VLAN tag for the native
VID (as it is egress-untagged, after all).
- Configure the ingress port to drop untagged and priority-tagged
traffic, if there is no native VLAN. The intention of this setting is
that a trunk port with no native VLAN should not accept untagged
traffic.
Since both of the above configurations for the native VLAN should only
be done if VLAN awareness is requested, they are actually done from the
ocelot_port_vlan_filtering function, after the basic procedure of
toggling the VLAN awareness flag of the port.
But there's a problem with that simplistic approach: we are trying to
juggle with 2 independent variables from a single function:
- Native VLAN of the port - its value is held in port->vid.
- VLAN awareness state of the port - currently there are some issues
here, more on that later*.
The actual problem can be seen when enslaving the switch ports to a VLAN
filtering bridge:
0. The driver configures a pvid of zero for each port, when in
standalone mode. While the bridge configures a default_pvid of 1 for
each port that gets added as a slave to it.
1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true.
The VLAN-filtering-dependent portion of the native VLAN
configuration is done, considering that the native VLAN is 0.
2. The bridge calls ocelot_vlan_add with vid=1, pvid=true,
untagged=true. The native VLAN changes to 1 (change which gets
propagated to hardware).
3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the
VLAN-filtering-dependent portion of the native VLAN configuration,
for the new native VLAN of 1. One can notice that after toggling "ip
link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0
type bridge vlan_filtering 1", the new native VLAN finally makes it
through and untagged traffic finally starts flowing again. But
obviously that shouldn't be needed.
So it is clear that 2 independent variables need to both re-trigger the
native VLAN configuration. So we introduce the second variable as
ocelot_port->vlan_aware.
*Actually both the DSA Felix driver and the Ocelot driver already had
each its own variable:
- Ocelot: ocelot_port_private->vlan_aware
- Felix: dsa_port->vlan_filtering
but the common Ocelot library needs to work with a single, common,
variable, so there is some refactoring done to move the vlan_aware
property from the private structure into the common ocelot_port
structure.
Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of fixes:
* FTM responder policy netlink validation fix
(but the only user validates again later)
* kernel-doc fixes
* a fix for a race in mac80211 radio registration vs. userspace
* a mesh channel switch fix
* a fix for a syzbot reported kasprintf() issue
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Soft-reset the PHY when coming out of low power mode, which seems to
be necessary with firmware versions 0.3.3.0 and 0.3.10.0.
This depends on ("net: marvell10g: report firmware version")
Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe")
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report the firmware version when probing the PHY to allow issues
attributable to firmware to be diagnosed.
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
3747 | *phy_fw_ver = val;
Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 88e6185 is reporting it has detected a PHY, when a port is
connected to an SFP. As a result, the fixed-phy configuration is not
being applied. That then breaks packet transfer, since the port is
reported as being down.
Add additional conditions to check the interface mode, and if it is
fixed always configure the port on link up/down, independent of the
PPU status.
Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove an unused initialized value.
Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the appropriate header for using dynamic_hex_dump(), which
seems to be incidentally included in some configurations but
not all.
Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ9131 will not work with some switches due to workaround for KSZ9031
introduced in commit d2fd719bcb0e83cb39cfee22ee800f98a56eceb3
("net/phy: micrel: Add workaround for bad autoneg").
Use genphy_read_status instead of dedicated ksz9031_read_status.
Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
First set of fixes for v5.6. Fixes for a crash and for two compiler
warnings.
brcmfmac
* fix a crash related to monitor interface
ath11k
* fix compiler warnings without CONFIG_THERMAL
rtw88
* fix compiler warnings related to suspend and resume functions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- a series from Tianyu Lan to fix crash reporting on Hyper-V
- three miscellaneous cleanup patches
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/Hyper-V: Report crash data in die() when panic_on_oops is set
x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set
x86/Hyper-V: Report crash register data or kmsg before running crash kernel
x86/Hyper-V: Trigger crash enlightenment only once during system crash.
x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump
x86/Hyper-V: Unload vmbus channel in hv panic callback
x86: hyperv: report value of misc_features
hv_debugfs: Make hv_debug_root static
hv: hyperv_vmbus.h: Replace zero-length array with flexible-array member
|
|
The rtw88 driver defines emtpy functions with multiple indirections
but gets one of these wrong:
drivers/net/wireless/realtek/rtw88/pci.c:1347:12: error: 'rtw_pci_resume' defined but not used [-Werror=unused-function]
1347 | static int rtw_pci_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1342:12: error: 'rtw_pci_suspend' defined but not used [-Werror=unused-function]
1342 | static int rtw_pci_suspend(struct device *dev)
Better simplify it to rely on the conditional reference in
SIMPLE_DEV_PM_OPS(), and mark the functions as __maybe_unused to avoid
warning about it.
I'm not sure if these are needed at all given that the functions
don't do anything, but they were only recently added.
Fixes: 44bc17f7f5b3 ("rtw88: support wowlan feature for 8822c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200408185413.218643-1-arnd@arndb.de
|
|
syzbot reports a warning:
precision 33020 too large
WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471
vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547
kvasprintf+0xb2/0x170 lib/kasprintf.c:22
kasprintf+0xbb/0xf0 lib/kasprintf.c:59
hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
...
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Thus it seems that kasprintf() with "%.*s" format can not be used for
duplicating a string with arbitrary length. Replace it with kstrndup().
Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64,
but the code is simpler this way.
Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com
Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi
[johannes: add note about length limit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Arnd reports that commit
9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine")
reworks the file I/O routines in a way that triggers the following
warning:
drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size
of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=]
We can work around this issue dropping an instance of efi_char16_t[256]
from the stack frame, and reusing the 'filename' field of the file info
struct that we use to obtain file information from EFI (which contains
the file name even though we already know it since we used it to open
the file in the first place)
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-8-ardb@kernel.org
|
|
Commit
d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary")
tries to avoid relocating the kernel in the EFI stub as far as possible.
However, when systemd-boot is used to boot a unified kernel image [1],
the image is constructed by embedding the bzImage as a .linux section in
a PE executable that contains a small stub loader from systemd that will
call the EFI stub handover entry, together with additional sections and
potentially an initrd. When this image is constructed, by for example
dracut, the initrd is placed after the bzImage without ensuring that at
least init_size bytes are available for the bzImage. If the kernel is
not relocated by the EFI stub, this could result in the compressed
kernel's startup code in head_{32,64}.S overwriting the initrd.
To prevent this, unconditionally relocate the kernel if the EFI stub was
entered via the handover entry point.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-5-ardb@kernel.org
|
|
Commit
3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
removed the .bss section from the bzImage.
However, while a PE loader is required to zero-initialize the .bss
section before calling the PE entry point, the EFI handover protocol
does not currently document any requirement that .bss be initialized by
the bootloader prior to calling the handover entry.
When systemd-boot is used to boot a unified kernel image [1], the image
is constructed by embedding the bzImage as a .linux section in a PE
executable that contains a small stub loader from systemd together with
additional sections and potentially an initrd. As the .bss section
within the bzImage is no longer explicitly present as part of the file,
it is not initialized before calling the EFI handover entry.
Furthermore, as the size of the embedded .linux section is only the size
of the bzImage file itself, the .bss section's memory may not even have
been allocated.
In particular, this can result in efi_disable_pci_dma being true even
when it was not specified via the command line or configuration option,
which in turn causes crashes while booting on some systems.
To avoid issues, place all EFI stub global variables into the .data
section instead of .bss. As of this writing, only boolean flags for a
few command line arguments and the sys_table pointer were in .bss and
will now move into the .data section.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: 3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-1-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-4-ardb@kernel.org
|
|
The pointer hdr is being assigned a value that is never read and
it is being updated later with a new value. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200402102537.503103-1-colin.king@canonical.com
Link: https://lore.kernel.org/r/20200409130434.6736-3-ardb@kernel.org
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200311072145.5001-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20200409130434.6736-2-ardb@kernel.org
|
|
rbd_notify_op_lock() isn't interested in a notify reply. Instead of
accepting that page vector just to free it, have watch-notify code take
care of it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
rbd_dev->opts is used to distinguish between the image that is being
mapped and a parent. However, because we no longer establish watch for
read-only mappings, this test is imprecise and results in unnecessary
rbd_unregister_watch() calls.
Make it consistent with need_watch in rbd_dev_image_probe().
Fixes: b9ef2b8858a0 ("rbd: don't establish watch for read-only mappings")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(),
including rbd_dev_header_info(), which means that rbd_dev_header_info()
isn't supposed to be called after rbd_dev_unprobe().
However, rbd_dev_image_release() calls rbd_dev_unprobe() before
rbd_unregister_watch(). This is racy because a header update notify
can sneak in:
"rbd unmap" thread ceph-watch-notify worker
rbd_dev_image_release()
rbd_dev_unprobe()
free and zero out header
rbd_watch_cb()
rbd_dev_refresh()
rbd_dev_header_info()
read in header
The same goes for "rbd map" because rbd_dev_image_probe() calls
rbd_dev_unprobe() on errors. In both cases this results in a memory
leak.
Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
rbd_unregister_watch() flushes notifies and therefore cannot be called
under header_rwsem because a header update notify takes header_rwsem to
synchronize with "rbd map". If mapping an image fails after the watch
is established and a header update notify sneaks in, we deadlock when
erroring out from rbd_dev_image_probe().
Move watch registration and unregistration out of the critical section.
The only reason they were put there was to make header_rwsem management
slightly more obvious.
Fixes: 811c66887746 ("rbd: fix rbd map vs notify races")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
s/mvmeta/mvneta/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows netif_receive_generic_xdp() to correctly determine the RX
queue from which the skb is coming, so that the context passed to the
XDP program will contain the correct RX queue index.
Signed-off-by: Gilberto Bertin <me@jibi.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: a646d6ec9098 ("soc: qcom: ipa: modem and microcontroller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable tmp64 is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The negotiation of flow control / pause frame modes was broken since
commit fcf1f59afc67 ("net: phy: marvell: rearrange to use
genphy_read_lpa()") moved the setting of phydev->duplex below the
phy_resolve_aneg_pause call. Due to a check of DUPLEX_FULL in that
function, phydev->pause was no longer set.
Fix it by moving the parsing of the status variable before the blocks
dealing with the pause frames.
As the Marvell 88E1510 datasheet does not specify the timing between the
link status and the "Speed and Duplex Resolved" bit, we have to force
the link down as long as the resolved bit is not set, to avoid reporting
link up before we even have valid Speed/Duplex.
Tested with a Marvell 88E1510 (RGMII to Copper/1000Base-T)
Fixes: fcf1f59afc67 ("net: phy: marvell: rearrange to use genphy_read_lpa()")
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
|
|
When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When sysctl_record_panic_msg is not set, the panic will
not be reported to Hyper-V via hyperv_report_panic_msg().
So the crash should be reported via hyperv_report_panic().
Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-6-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When a guest VM panics, Hyper-V should be notified only once via the
crash synthetic MSRs. Current Linux code might write these crash MSRs
twice during a system panic:
1) hyperv_panic/die_event() calling hyperv_report_panic()
2) hv_kmsg_dump() calling hyperv_report_panic_msg()
Fix this by not calling hyperv_report_panic() if a kmsg dump has been
successfully registered. The notification will happen later via
hyperv_report_panic_msg().
Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-4-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- two cleanups
- fix a boot regression introduced in this merge window
- fix wrong use of memory allocation flags
* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix booting 32-bit pv guest
x86/xen: make xen_pvmmu_arch_setup() static
xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
xen: Use evtchn_type_t as a type for event channels
|
|
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Fixes: 6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.
Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Springer <rspringer@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's quite a few changes this time around.
Most of these are fixes and cleanups, but there's also new chip
support for some drivers and a bit of rework"
* tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits)
pwm: pca9685: Fix PWM/GPIO inter-operation
pwm: Make pwm_apply_state_debug() static
pwm: meson: Remove redundant assignment to variable fin_freq
pwm: jz4740: Allow selection of PWM channels 0 and 1
pwm: jz4740: Obtain regmap from parent node
pwm: jz4740: Improve algorithm of clock calculation
pwm: jz4740: Use clocks from TCU driver
pwm: sun4i: Remove redundant needs_delay
pwm: omap-dmtimer: Implement .apply callback
pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle
pwm: omap-dmtimer: Fix PWM enabling sequence
pwm: omap-dmtimer: Update description for PWM OMAP DM timer
pwm: omap-dmtimer: Drop unused header file
pwm: renesas-tpu: Drop confusing registered message
pwm: renesas-tpu: Fix late Runtime PM enablement
pwm: rcar: Fix late Runtime PM enablement
dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support
pwm: meson: Fix confusing indentation
pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT
pwm: pca9685: Replace CONFIG_PM with __maybe_unused
...
|
|
Pull IPMI updates from Corey Minyard:
"Bug fixes for main IPMI driver, kcs updates
A couple of bug fixes for the main IPMI driver, one functional and two
annotations.
The kcs driver has some significant updates that have been pending for
a while, but I forgot to include in next until a week ago. But this
code is only used by the people who are sending it to me, really, so
it's not a big deal. I did want it to sit in next for at least a week,
and it did result in a fix"
* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
ipmi: kcs: aspeed: Implement v2 bindings
ipmi: kcs: Finish configuring ASPEED KCS device before enable
dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
ipmi: fix hung processes in __get_guid()
drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists
|
|
Pull more drm fixes from Dave Airlie:
"As expected, more fixes did turn up in the latter part of the week.
The drm_local_map build regression fix is here, along with temporary
disabling of the hugepage work due to some amdgpu related crashes.
Otherwise it's just a bunch of i915, and amdgpu fixes.
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create"
* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/ttm: Temporarily disable the huge_fault() callback
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
drm/legacy: Fix type for drm_local_map.offset
drm/amdgpu/display: fix warning when compiling without debugfs
drm/amdgpu: unify fw_write_wait for new gfx9 asics
drm/amd/powerplay: error out on forcing clock setting not supported
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
drm/amd/display: Check for null fclk voltage when parsing clock table
drm/amd/display: Acknowledge wm_optimized_required
drm/amd/display: Make cursor source translation adjustment optional
drm/amd/display: Calculate scaling ratios on every medium/full update
drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
drm/amd/display: Fix incorrect cursor pos on scaled primary plane
drm/amd/display: change default pipe_split policy for DCN1
drm/amd/display: Translate cursor position by source rect
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
drm/amd/display: Avoid create MST prop after registration
drm/amdgpu/psp: dont warn on missing optional TA's
drm/amdgpu: update RAS related dmesg print
drm/amdgpu: resolve mGPU RAS query instability
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
|