| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In gs_usb_disconnect(), all channels are destroyed first, then all
anchored RX URBs (parent->rx_submitted) are disposed with
usb_kill_anchored_urbs().
The call to usb_kill_anchored_urbs() is not needed, as
gs_destroy_candev() of the last active channel already disposes the RX
URBS.
Remove not needed call to usb_kill_anchored_urbs() from
gs_usb_disconnect().
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-11-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In gs_destroy_candev(), the netdev is unregistered first, then all
anchored TX URBs (dev->tx_submitted) are disposed with
usb_kill_anchored_urbs().
The call to usb_kill_anchored_urbs() is not needed, as
unregister_candev() calls gs_can_close(), which already disposes the
TX URBS.
Remove not needed call to usb_kill_anchored_urbs() from
gs_destroy_candev().
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-10-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ndo_stop
When the USB device is unplugged, gs_can_close() (which implements the
struct net_device_ops::ndo_stop callback) is called. In this function
an attempt is made to shut down the USB device with a USB control
message. For disconnected devices this will fail and a warning message
is printed.
Silence the driver by removing the printout of the error message if
the reset command fails.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-9-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
path
Remove unnecessary "out of memory" message from the error path of
gs_can_start_xmit() and gs_can_open().
Convert the printout in case of a failing usb_submit_urb() in
gs_can_open() from numbers to human readable error codes.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-8-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
in case of OOM
In case of an RX overflow error from the CAN controller and an OOM
where no skb can be allocated, the error counters are not incremented.
Fix this by first incrementing the error counters and then allocate
the skb.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Make use the previously assigned variable stats instead of using
netdev->stats.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-6-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Make use the previously assigned variable netdev instead of using
dev->netdev.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-5-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
To ease readability and maintainability uniformly use the variable
name "parent" for the struct gs_usb in the gs_usb driver.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-4-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Remove the return statements from void gs_usb_set_timestamp()
function, as it's not generally useful.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-3-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Indent block comment so that it aligns the * on each line.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-2-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Remove leading spaces from goto labels in accordance with the kernel
encoding style.
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-1-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230724211841.805053-1-robh@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The controllers present in the D1 are extremely similar to the R40
and require the same reset quirks, but An extra quirk is needed to support
receiving packets.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-6-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The Allwinner D1's CAN controllers have the ACPC and ACPM registers
moved down. Compensate for this by adding an offset quirk for the
acceptance registers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-5-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Remove unused/legacy peak_usb_netif_rx() function (not longer used
since commit 28e0a70cede3 ("can: peak_usb: CANFD: store 64-bits hw
timestamps").
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Link: https://lore.kernel.org/all/20230721180758.26199-1-ps.report@gmx.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 20bf98c94146eb6fe62177817cb32f53e72dd2e8.
Richard raised concerns about correctness of the code on previous
generations of the HW.
Fixes: 20bf98c94146 ("net: stmmac: correct MAC propagation delay")
Link: https://lore.kernel.org/all/ZMGIuKVP7BEotbrn@hoboy.vegasvil.org/
Link: https://lore.kernel.org/r/20230726224054.3241127-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Qualcomm clocks can set their frequency to a variety of levels
generally. Let's use the max for clk_ptp_ref to ensure the best
timestamping resolution possible.
Without this, the default value of the clock is used. For sa8775p-ride
this is 19.2 MHz, far less than the 230.4 MHz possible.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230725211853.895832-4-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The priv variable is _always_ of type (struct stmmac_priv *), so let's
stop using (void *) since it isn't abstracting anything.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230725211853.895832-3-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
- Core fix for enumeration completion
- Qualcomm driver fix to update status
- AMD driver fix for probe error check
* tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Fix a check for errors in probe()
soundwire: qcom: update status correctly with mask
soundwire: fix enumeration completion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Out of bound fix for hisilicon phy
- Qualcomm synopsis femto phy for keeping clock enabled during suspend
and enabling ref clocks
- Mediatek driver fixes for upper limit test and error code
* tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()
phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
phy: qcom-snps-femto-v2: properly enable ref clock
phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test
phy: phy-mtk-dp: Fix an error code in probe()
|
|
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop'
if an unexpected value is returned by pskb_trim().
Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.
Cc: stable@vger.kernel.org
Fixes: a220871be66f ("virtio-net: correctly enable multiqueue")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions returns type bool, not pointers, so return false instead
of NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/52d0814a-7287-4160-94b5-ac7939ac61c6@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce support for ethernet chip available in MT7988 SoC to
mtk_eth_soc driver. As a first step support only the first GMAC which
is hard-wired to the internal DSA switch having 4 built-in gigabit
Ethernet PHYs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/25c8377095b95d186872eeda7aa055da83e8f0ca.1690246605.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The to-be-added MT7988 SoC adds many new clocks which need to be
controlled by the Ethernet driver, which will result in their total
number exceeding 32.
Prepare by converting clock bitmaps into 64-bit types.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/6960a39bb0078cf84d7642a9558e6a91c6cc9df3.1690246066.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a preliminary patch to introduce support for MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/9499ac3670b2fc5b444404b84e8a4a169beabbf2.1690246066.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce NETSYS_V3 chipset version support.
This is a preliminary patch to introduce support for MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/0db2260910755d76fa48e303b9f9bdf4e5a82340.1690246066.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get rid of MTK_MAC_COUNT since it is a duplicated of MTK_MAX_DEVS.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/1856f4266f2fc80677807b1bad867659e7b00c65.1690246066.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a preliminary patch to add MT7988 SoC support since it runs 3
macs instead of 2.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/3563e5fab367e7d79a7f1296fabaa5c20f202d7a.1690246066.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce version field in mtk_soc_data data structure in order to
make mtk_eth driver easier to maintain for chipset configuration
codebase. Get rid of MTK_NETSYS_V2 bit in chip capabilities.
This is a preliminary patch to introduce support for MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e52fae302ca135436e5cdd26d38d87be2da63055.1690246066.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230724211905.805665-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230724211859.805481-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Old firmware versions could only read up to 48 bytes from a transceiver
module's EEPROM in one go. Newer versions can read up to 128 bytes,
resulting in fewer transactions.
Query support for the new capability during driver initialization and if
supported, read up to 128 bytes in one go.
This is going to be especially useful for upcoming transceiver module
firmware flashing support.
Before:
# perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50
[...]
Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50':
3 devlink:devlink_hwmsg
After:
# perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50
[...]
Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50':
1 devlink:devlink_hwmsg
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/99d1618e8cd5acefb2f795dfde1a5b41caa07dcb.1690281940.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The layout of the register always supported 128 bytes payloads, but the
driver defined the register with a shorter length because it uses a
maximum payload size of 48 bytes. Increase the register's length in
preparation for using 128 bytes payloads.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/ba5c0f631e2cfd61bd21218d0cbfe03fbfe521f9.1690281940.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'lock' argument is always set to the default value of '0'. Remove it
from the arguments list.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/fb5dd22830622ceeda1c2d6431c27fccd0687aca.1690281940.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MCAM register reports the device supported management features. Querying
this register exposes if features are supported with the current
firmware version in the current ASIC. Then, the driver can separate
between different implementations dynamically.
MCAM register supports querying whether the MCIA register supports 128
bytes payloads or only 48 bytes. Add support for the register as
preparation for allowing larger MCIA transactions.
Note that the access to the bits in the field 'mng_feature_cap_mask' is
not same to other mask fields in other registers. In most of the cases
bit #0 is the first one in the last dword, in MCAM register, bits #0-#31
are in the first dword and so on. Declare the mask field using bits
arrays per dword to simplify the access.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/1427a3f57ba93db1c5dd4f982bfb31dd5c82356e.1690281940.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The array 'mlxsw_reg_infos' is ordered by registers' IDs. The ID of MPSC
register is 0x9080, so it should be after MCDA (register ID 0x9063) and
not after MTUTC (register ID 0x9055). Note that the register's fields are
defined in the correct place in the file, only the definition in
'mlxsw_reg_infos' is wrong. This issue was found while adding new
register which supposed to be before mpsc.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c5e270cd5769f301fe81235622215143506e1b48.1690281940.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Broadcom ASP 2.0 Ethernet controller is only present on Broadcom STB
SoCs. Hence add a dependency on ARCH_BRCMSTB, to prevent asking the
user about this driver when configuring a kernel without Broadcom
ARM-based set-top box chipset support.
Fixes: 490cb412007de593 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/1e8b998aa8dcc6e38323e295ee2430b48245cc79.1690299794.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Microchip LAN8740/LAN8742 PHYs support basic unicast, broadcast, and
Magic Packet WoL. They have one pattern filter matching up to 128 bytes
of frame data, which can be used to implement ARP or multicast WoL.
ARP WoL matches any ARP frame with broadcast address.
Multicast WoL matches any multicast frame.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/1690329270-2873-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the clarification [1] in the latest napi.rst, the tx
processing cannot call any XDP (or page pool) APIs if the "budget"
is 0. Because NAPI is called with the budget of 0 (such as netpoll)
indicates we may be in an IRQ context, however, we cannot use the
page pool from IRQ context.
[1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/
Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: huawei-wmi: Silence ambient light sensor
platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100
platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops
platform/x86: think-lmi: Use kfree_sensitive instead of kfree
platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks
platform/x86: intel: hid: Always call BTNL ACPI method
platform/x86/amd/pmf: Notify OS power slider update
platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params
platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551
platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed()
platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
|
|
The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.
When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.
This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.
Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152] <TASK>
[ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870] call_timer_fn+0x31/0x110
[ 7679.415698] expire_timers+0xb2/0x120
[ 7679.423403] run_timer_softirq+0x179/0x1e0
[ 7679.431532] ? __schedule+0x2b1/0x820
[ 7679.439078] __do_softirq+0xd1/0x295
[ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 7679.454867] run_ksoftirqd+0x22/0x30
[ 7679.462058] smpboot_thread_fn+0xb7/0x160
[ 7679.469670] kthread+0xcd/0xf0
[ 7679.476097] ? __pfx_kthread+0x10/0x10
[ 7679.483211] ret_from_fork+0x29/0x50
[ 7679.490047] </TASK>
[ 7679.495204] ---[ end trace 0000000000000000 ]---
[ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump
[ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value
[ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641
[ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683
[ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040
[ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800
[ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081
[ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022
[ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031
[ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030
[ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808
[ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000
[ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa
[ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000
[ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108
[ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter
[ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 8086.945561] ------------[ cut here ]------------
Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0
Oops: (null) due to oops @ 0xffffffff81573888
RIP: 0010:dql_completed+0x148/0x160
Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95
c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? igc_poll+0x1a9/0x14d0 [igc]
__napi_poll+0x2e/0x1b0
net_rx_action+0x126/0x250
__do_softirq+0xd1/0x295
irq_exit_rcu+0xc5/0xf0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x27/0x40
RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b
de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf
4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
cpuidle_enter+0x2e/0x50
call_cpuidle+0x23/0x40
do_idle+0x1be/0x220
cpu_startup_entry+0x20/0x30
rest_init+0xb5/0xc0
arch_call_rest_init+0xe/0x30
start_kernel+0x448/0x760
x86_64_start_kernel+0x109/0x150
secondary_startup_64_no_verify+0xe0/0xeb
</TASK>
more>
[0]kdb>
[0]kdb>
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, type go a second time if you really want to
continue
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, attempting to continue
[ 8086.955689] refcount_t: underflow; use-after-free.
[ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110
[ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110
[ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81
48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d
42 c6 eb 00 00 0f 85 59 ff ff ff 48
[ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286
[ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888
[ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880
[ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28
[ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000
[ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00
[ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955804] PKRU: 55555554
[ 8086.955805] Call Trace:
[ 8086.955806] <IRQ>
[ 8086.955808] tcp_wfree+0x112/0x130
[ 8086.955814] skb_release_head_state+0x24/0xa0
[ 8086.955818] napi_consume_skb+0x9c/0x160
[ 8086.955821] igc_poll+0x5d8/0x14d0 [igc]
[ 8086.955835] __napi_poll+0x2e/0x1b0
[ 8086.955839] net_rx_action+0x126/0x250
[ 8086.955843] __do_softirq+0xd1/0x295
[ 8086.955846] irq_exit_rcu+0xc5/0xf0
[ 8086.955851] common_interrupt+0x86/0xa0
[ 8086.955857] </IRQ>
[ 8086.955857] <TASK>
[ 8086.955858] asm_common_interrupt+0x27/0x40
[ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8
1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75
c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955875] cpuidle_enter+0x2e/0x50
[ 8086.955880] call_cpuidle+0x23/0x40
[ 8086.955884] do_idle+0x1be/0x220
[ 8086.955887] cpu_startup_entry+0x20/0x30
[ 8086.955889] rest_init+0xb5/0xc0
[ 8086.955892] arch_call_rest_init+0xe/0x30
[ 8086.955895] start_kernel+0x448/0x760
[ 8086.955898] x86_64_start_kernel+0x109/0x150
[ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955904] </TASK>
[ 8086.955904] ---[ end trace 0000000000000000 ]---
[ 8086.955912] ------------[ cut here ]------------
[ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27!
[ 8086.955918] invalid opcode: 0000 [#1] SMP
[ 8086.955922] RIP: 0010:dql_completed+0x148/0x160
[ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db
0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
[ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
[ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
[ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
[ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
[ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
[ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
[ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955938] PKRU: 55555554
[ 8086.955939] Call Trace:
[ 8086.955939] <IRQ>
[ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc]
[ 8086.955949] __napi_poll+0x2e/0x1b0
[ 8086.955952] net_rx_action+0x126/0x250
[ 8086.955956] __do_softirq+0xd1/0x295
[ 8086.955958] irq_exit_rcu+0xc5/0xf0
[ 8086.955961] common_interrupt+0x86/0xa0
[ 8086.955964] </IRQ>
[ 8086.955965] <TASK>
[ 8086.955965] asm_common_interrupt+0x27/0x40
[ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00
31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00
49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955978] cpuidle_enter+0x2e/0x50
[ 8086.955981] call_cpuidle+0x23/0x40
[ 8086.955984] do_idle+0x1be/0x220
[ 8086.955985] cpu_startup_entry+0x20/0x30
[ 8086.955987] rest_init+0xb5/0xc0
[ 8086.955990] arch_call_rest_init+0xe/0x30
[ 8086.955992] start_kernel+0x448/0x760
[ 8086.955994] x86_64_start_kernel+0x109/0x150
[ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955998] </TASK>
[ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype
nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO)
rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs
[16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs
[16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs
[16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs
[16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs
[16762.543784] ---[ end trace 0000000000000000 ]---
[16762.849099] RIP: 0010:dql_completed+0x148/0x160
PANIC: Fatal exception in interrupt
Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support")
Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.
Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)
We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.
Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.
Fix this by correctly read the fdb entry after it was searched.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.
A FDB entry can't be modified so it needs to be removed and insert again
with the new values.
To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.
Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
STATIC value resulting in allocating an invalid entry.
Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qca8xxx switch supports 2 way to write reg values, a slow way using
mdio and a fast way by sending specially crafted mgmt packet to
read/write reg.
The fast way can support up to 32 bytes of data as eth packet are used
to send/receive.
This correctly works for almost the entire regmap of the switch but with
the use of some kernel selftests for dsa drivers it was found a funny
and interesting hw defect/limitation.
For some specific reg, bulk write won't work and will result in writing
only part of the requested regs resulting in half data written. This was
especially hard to track and discover due to the total strangeness of
the problem and also by the specific regs where this occurs.
This occurs in the specific regs of the ATU table, where multiple entry
needs to be written to compose the entire entry.
It was discovered that with a bulk write of 12 bytes on
QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
were written, but QCA8K_REG_ATU_DATA1 was always zero.
Tcpdump was used to make sure the specially crafted packet was correct
and this was confirmed.
The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
resulted in an entry somehow possible as the first bytes of the mac
address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
QCA8K_REG_ATU_DATA2.
Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
QCA8K_REG_ATU_FUNC correctly written.
A speculation on the problem might be that there are some kind of
indirection internally when accessing these regs and they can't be
accessed all together, due to the fact that it's really a table mapped
somewhere in the switch SRAM.
Even more funny is the fact that every other reg was tested with all
kind of combination and they are not affected by this problem. Read
operation was also tested and always worked so it's not affected by this
problem.
The problem is not present if we limit writing a single reg at times.
To handle this hardware defect, enable use_single_write so that bulk
api can correctly split the write in multiple different operation
effectively reverting to a non-bulk write.
Cc: Mark Brown <broonie@kernel.org>
Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: switchdev bridge offload
Wojciech Drewek says:
Linux bridge provides ability to learn MAC addresses and vlans
detected on bridge's ports. As a result of this, FDB (forward data base)
entries are created and they can be offloaded to the HW. By adding
VF's port representors to the bridge together with the uplink netdev,
we can learn VF's and link partner's MAC addresses. This is achieved
by slow/exception-path, where packets that do not match any filters
(FDB entries in this case) are send to the bridge ports.
Driver keeps track of the netdevs added to the bridge
by listening for NETDEV_CHANGEUPPER event. We distinguish two types
of bridge ports: uplink port and VF's representor port. Linux
bridge always learns src MAC of the packet on rx path. With the
current slow-path implementation, it means that we will learn
VF's MAC on port repr (when the VF transmits the packet) and
link partner's MAC on uplink (when we receive it on uplink from LAN).
The driver is notified about learning of the MAC/VLAN by
SWITCHDEV_FDB_{ADD|DEL}_TO_DEVICE events. This is followed by creation
of the HW filter. The direction of the filter is based on port
type (uplink or VF repr). In case of the uplink, rule forwards
the packets to the LAN (matching on link partner's MAC). When the
notification is received on VF repr then the rule forwards the
packets to the associated VF (matching on VF's MAC).
This approach would not work on its own however. This is because if
one of the directions is offloaded, then the bridge would not be able
to learn the other one. If the egress rule is added (learned on uplink)
then the response from the VF will be sent directly to the LAN.
The packet will not got through slow-path, it would not be seen on
VF's port repr. Because of that, the bridge would not learn VF's MAC.
This is solved by introducing guard rule. It prevents forward rule from
working until the opposite direction is offloaded.
Aging is not fully supported yet, aging time is static for now. The
follow up submissions will introduce counters that will allow us to
keep track if the rule is actually being used or not.
A few fixes/changes are needed for this feature to work with ice driver.
These are introduced in first 5 patches.
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: add tracepoints for the switchdev bridge
ice: implement static version of ageing
ice: implement bridge port vlan
ice: Add VLAN FDB support in switchdev mode
ice: Add guard rule when creating FDB in switchdev
ice: Switchdev FDB events support
ice: Implement basic eswitch bridge setup
ice: Unset src prune on uplink VSI
ice: Disable vlan pruning for uplink VSI
ice: Don't tx before switchdev is fully configured
ice: Prohibit rx mode change in switchdev mode
ice: Skip adv rules removal upon switchdev release
====================
Link: https://lore.kernel.org/r/20230724161152.2177196-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
