summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-02-27ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan5-14/+80
Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI function declarationsSujith Manoharan2-267/+254
This patch converts a few functions to static variants and removes extraneous declarations. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI bits from hw.hSujith Manoharan5-195/+199
This patch moves all the MCI-specific declarations that have been dumped unceremoniously in hw.h to ar9003_mci.h Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI bits from ath9k_hw_reset()Sujith Manoharan3-118/+163
This patch moves all the MCI-specific code in the main reset function to helper functions. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Setup MCI calibration using a helperSujith Manoharan3-38/+54
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Handle MCI power state using a helperSujith Manoharan3-15/+20
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Use a helper function to get MCI ISRSujith Manoharan3-27/+28
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Initialize BTCOEX scheme using a helperSujith Manoharan4-25/+37
Setting up the required scheme can be done as part of the BTCOEX initialization path and it doesn't belong in ath9k_hw_fill_cap_info() anyway. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan3-2/+34
This patch uses CONFIG_ATH9K_BTCOEX_SUPPORT to conditionally compile btcoex-related code in the driver core. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Calculate ampdu limit using a helperSujith Manoharan3-10/+24
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Process BTCOEX interrupts using a helperSujith Manoharan3-6/+14
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Use proper start/stop routines for BTCOEXSujith Manoharan3-19/+34
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Move BTCOEX init/deinit functions to gpio.cSujith Manoharan3-47/+54
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Initialize MCI params using a helperSujith Manoharan3-21/+27
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Cleanup MCI init/deinit routinesSujith Manoharan4-56/+23
This patch simplifies the buffer allocation functions for MCI and removes unneeded memset calls. Also, a couple of unused variables are removed and a memory leak in DMA allocation is fixed. [ 1263.788267] WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:875 check_unmap+0x173/0x7e0() [ 1263.788273] ath9k 0000:06:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000071908000] [map size=512 bytes] [unmap size=256 bytes] [ 1263.788345] Pid: 774, comm: rmmod Tainted: G W O 3.3.0-rc3-wl #18 [ 1263.788348] Call Trace: [ 1263.788355] [<ffffffff8105110f>] warn_slowpath_common+0x7f/0xc0 [ 1263.788359] [<ffffffff81051206>] warn_slowpath_fmt+0x46/0x50 [ 1263.788363] [<ffffffff8125a713>] check_unmap+0x173/0x7e0 [ 1263.788368] [<ffffffff8123fc22>] ? prio_tree_left+0x32/0xc0 [ 1263.788373] [<ffffffff8125aded>] debug_dma_free_coherent+0x6d/0x80 [ 1263.788381] [<ffffffffa0701c3c>] ath_mci_cleanup+0x7c/0x110 [ath9k] [ 1263.788387] [<ffffffffa06f4033>] ath9k_deinit_softc+0x113/0x120 [ath9k] [ 1263.788392] [<ffffffffa06f55cc>] ath9k_deinit_device+0x5c/0x70 [ath9k] [ 1263.788397] [<ffffffffa0704934>] ath_pci_remove+0x54/0xa0 [ath9k] [ 1263.788401] [<ffffffff81267d06>] pci_device_remove+0x46/0x110 [ 1263.788406] [<ffffffff813102bc>] __device_release_driver+0x7c/0xe0 [ 1263.788410] [<ffffffff81310a00>] driver_detach+0xd0/0xe0 [ 1263.788414] [<ffffffff81310118>] bus_remove_driver+0x88/0xe0 [ 1263.788418] [<ffffffff813111c2>] driver_unregister+0x62/0xa0 [ 1263.788421] [<ffffffff812680c4>] pci_unregister_driver+0x44/0xc0 [ 1263.788427] [<ffffffffa0705015>] ath_pci_exit+0x15/0x20 [ath9k] [ 1263.788432] [<ffffffffa070a92d>] ath9k_exit+0x15/0x31 [ath9k] [ 1263.788436] [<ffffffff810b971c>] sys_delete_module+0x18c/0x270 [ 1263.788441] [<ffffffff81436edd>] ? retint_swapgs+0x13/0x1b [ 1263.788446] [<ffffffff812483be>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1263.788450] [<ffffffff814378e9>] system_call_fastpath+0x16/0x1b [ 1263.788453] ---[ end trace 3ab4d030ffde40d4 ]--- Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove AR9462 v1.0 supportSujith Manoharan7-1573/+10
v1.0 chips are not available in the market. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27wireless: Fix typo in mac80211_hwsim.cMasanari Iida1-4/+4
Correct spelling "occured" to "occurred" in drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add RT5372 chipset supportJohn Li5-25/+147
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: avoid useless cast from (struct ath_rateset *) to (u8 *) and backPavel Roskin1-4/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rtlwifi: Fix breakage in debug functions when built as a moduleLarry Finger1-1/+1
Since commit 481b9606, it has not been possible to invoke debugging with any rtlwifi driver built as a module. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add VCO recalibrationJohn Li10-0/+171
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Fix descriptor length for AR9462Sujith Manoharan2-2/+7
Change the descriptor length to 24 and explicitly set the control field 23 to zero. Not doing so would result in dropping of frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Fix programming SYNTH4 for AR9462Sujith Manoharan1-2/+2
The LONG_SHIFT_SELECT offset is different for AR9462 from the other chip families. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Initialize NF values properlySujith Manoharan2-8/+20
Using AR_SREV_* macros for setting up the chip-specific NF values will make adding support for new chips hard. Use separate macros for each chip. Currently, AR9462 has the same value for all NF limits. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove unused initvalsSujith Manoharan2-859/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Fix phyerr debug statisticsSujith Manoharan1-4/+2
Validate the phyerr value against the max. size of the statistics array properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Prettify recv debugfs file outputSujith Manoharan1-52/+45
Dumping the RSSI information in the middle of error statistics is a bit misleading. Move them to the end. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Add a debugfs file to display reset statisticsSujith Manoharan1-0/+41
Location: <debugfs_path>/ieee80211/phy#/ath9k/reset Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Merge wiphy and misc debugfs filesSujith Manoharan1-160/+64
This patch merges the 'wiphy' and 'misc' debugfs files and consolidates the information. Information about the current channel and other HT parameters can be obtained from both mac80211 and iw. Remove such redundant data. The reset statistics have been removed, they will be re-added in a subsequent patch (in a new debugfs file). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove unnecessary variable initializationSujith Manoharan1-5/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: remove duplicate initvalsFelix Fietkau3-441/+34
Comparing SHA1 checksums of the initval tables has shown that there are many tables that are 100% identical. iniBank{0,1,2,3,7} and iniBB_RfGain are shared by AR5416, AR913x, AR9160 iniBank6 is shared between AR5416 and AR9160 iniBank6TPC is shared between AR913x and AR9160 iniPcieSerdes is the same for all AR9002 based devices The CCK FIR coefficients are shared between AR9271 and AR9287 Getting rid of those duplicates saves about 7.5k uncompressed (on MIPS). For AR9003 and later there are some duplicates as well, but I've decided to leave them in for now, as the initvals for those chips are still actively maintained by QCA. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00: Add support for D-Link DWA-127 to rt2800usb.Gertjan van Wingerde1-0/+1
This is an RT3070 based device. Cc: <stable@vger.kernel.org> Reported-by: Mikhail Kryshen <mikhail@kryshen.net> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27Merge branch 'wireless-next' of ↵John W. Linville35-611/+1112
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi
2012-02-22ath9k: remove unnecessary PS wrappersMohammed Shafi Shajakhan1-4/+0
ath_set_channel is called from ath9k_config which already has proper PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22ath9k: remove obsolete commentsMohammed Shafi Shajakhan1-6/+0
the corresponding code/logic was removed in "ath9k: rework power state handling" Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22ath5k:Remove __raw_read and __raw_writeJonathan Bither3-17/+17
By swithing from our __raw_read and __raw_write functions to ioread32 and iowrite32, benchmarks on my desk with iperf went from 11MBps to 18.1MBps using the AHB bus on an EnGenius ECB3500 running OpenWRT. Signed-off-by: Jonathan Bither <jonbither@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22cfg80211: restructure AP/GO mode APIJohannes Berg1-35/+47
The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: remove il_is_rfkill_hwStanislaw Gruszka1-7/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: s/il_txq_mem/il_free_txq_mem/gStanislaw Gruszka4-5/+5
Previous name was confusing. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: s/S_RF_KILL_HW/S_RFKILL/gStanislaw Gruszka5-36/+36
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: small queue initializations cleanupStanislaw Gruszka4-61/+52
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: enable only rfkill interrupt when rfkill switch is on during IFF_UPStanislaw Gruszka1-4/+2
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: small il4965_set_hw_ready cleanupStanislaw Gruszka1-21/+14
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: check correct il_poll_bit error valueStanislaw Gruszka1-1/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: do not grab nic access if rfkillStanislaw Gruszka5-57/+97
If rfkill is on il_grab_nic_access() fail and we can not write to the various registers during stop procedure. Write to those registers unconditionally instead. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwleagcy: fix ident code damageStanislaw Gruszka2-26/+10
Using ident is not always good. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwleagcy: remove old commentsStanislaw Gruszka1-16/+0
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: improve mac operation debuggability a bitStanislaw Gruszka2-52/+53
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: get rid of tx/rx traffic logStanislaw Gruszka6-423/+145
The same data can be gathered using monitor mode. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22iwlegacy: merge all ops structures into oneStanislaw Gruszka5-131/+78
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-07 07:59:15 +0300