| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
de-initialization
Add callback functions for line card thermal area initialization and
de-initialization. Each line card is associated with the relevant
thermal area, which may contain thermal zones for cages and gearboxes
found on this line card.
The line card thermal initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.
For example thermal zone for module #9 located at line card #7 will
have type:
mlxsw-lc7-module9.
And thermal zone for gearbox #2 located at line card #5 will have type:
mlxsw-lc5-gearbox2.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
de-initialization
Netdevs for ports found on line cards are registered upon provisioning.
However, user space is not allowed to access the transceiver modules
found on a line card until the line card becomes active.
Therefore, register event operations with the line card core to get
notifications whenever a line card becomes active or inactive.
When user space tries to dump the EEPROM of a transceiver module or reset
it and the corresponding line card is inactive, emit an error
message:
ethtool -m enp1s0nl7p9
netlink error: mlxsw_core: Cannot read EEPROM of module on an inactive line card
netlink error: Input/output error
When user space tries to set the power mode policy of such a transceiver,
cache the configuration and apply it when the line card becomes active. This
is consistent with other port configuration (e.g., MTU setting) that user space
is able to perform while the line card is provisioned, but inactive.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the code that applies the module power mode to the device to a
separate function. This function will be invoked by the next patch to
set the power mode on transceiver modules found on a line card when the
line card becomes active.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass bus argument to mlxsw_env_init(). The purpose is to get access to
device handle, which is to be provided to error message in case of line
card activation failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce an infrastructure allowing users to register a set
of operations which are to be called whenever a line card gets
active/inactive.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-04-19
this is a pull request of 17 patches for net-next/master.
The first 2 patches are by me and target the CAN driver
infrastructure. One patch renames a function in the rx_offload helper
the other one updates the CAN bitrate calculation to prefer small bit
rate pre-scalers over larger ones, which is encouraged by the CAN in
Automation.
Kris Bahnsen contributes a patch to fix the links to Technologic
Systems web resources in the sja1000 driver.
Christophe Leroy's patch prepares the mpc5xxx_can driver for upcoming
powerpc header cleanup.
Minghao Chi's patch converts the flexcan driver to use
pm_runtime_resume_and_get().
The next 2 patches target the Xilinx CAN driver. Lukas Bulwahn's patch
fixes an entry in the MAINTAINERS file. A patch by me marks the bit
timing constants as const.
Wolfram Sang's patch documents r8a77961 support on the
renesas,rcar-canfd bindings document.
The next 2 patches are by me and add support for the mcp251863 chip to
the mcp251xfd driver.
The last 7 patches are by Pavel Pisa, Martin Jerabek et al. and add
the ctucanfd driver for the CTU CAN FD IP Core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to add new compatible strings for each new supported
chip version. The compatible string is used only to select the subdriver
(rtl8365mb.c or rtl8366rb.c). Once in the subdriver, it will detect the
chip model by itself, ignoring which compatible string was used.
Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove unnecessary line wrap for hns3_set_tunable to improve
function readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Magic values are not recommended.
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes wrong words in comments.
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The param of function hclgevf_get_mbx_resp has been changed but the
comments not upodated. This patch updates it.
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the active tx spare buffer size maybe changed according
to the page size, so add log to notice it.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, There is a low probability that pf mtu configuration fails, but
the information in logs is insufficient for problem locating when the VF
mtu value is illegally modified.
So record the vf index and vf mtu value at the failure scenario.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct hclge_pf_to_vf_msg is used for mailbox message from
PF to VF, including both response and request. But its definition
can only indicate respone, which makes the message data copy in
function hclge_send_mbx_msg() unreadable. So refine it by edding
a general message definition into it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use struct hns3_ring_param to replace variable new/old_xxx and
add hns3_is_ringparam_changed() to judge them if is changed to
improve code readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For DEVICE_VERSION_V2, the hardware does not support the CQE mode.
So add capability bit for coalesce CQE mode and add parameter check
for it in ethtool.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aq_xdp_xmit() is the callback function of .ndo_xdp_xmit.
It internally calls aq_nic_xmit_xdpf() to send packet.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It supports XDP_PASS, XDP_DROP and multi buffer.
The new function aq_nic_xmit_xdpf() is used to send packet with
xdp_frame and internally it calls aq_nic_map_xdp().
AQC chip supports 32 multi-queues and 8 vectors(irq).
there are two option
1. under 8 cores and 4 tx queues per core.
2. under 4 cores and 8 tx queues per core.
Like ixgbe, these tx queues can be used only for XDP_TX, XDP_REDIRECT
queue. If so, no tx_lock is needed.
But this patchset doesn't use this strategy because getting hardware tx
queue index cost is too high.
So, tx_lock is used in the aq_nic_xmit_xdpf().
single-core, single queue, 80% cpu utilization.
30.75% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
10.35% [kernel] [k] aq_hw_read_reg <---------- here
4.38% [kernel] [k] get_page_from_freelist
single-core, 8 queues, 100% cpu utilization, half PPS.
45.56% [kernel] [k] aq_hw_read_reg <---------- here
17.58% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
4.72% [kernel] [k] hw_atl_b0_hw_ring_rx_receive
The new function __aq_ring_xdp_clean() is a xdp rx handler and this is
called only when XDP is attached.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aq_xdp() is a xdp setup callback function for Atlantic driver.
When XDP is attached or detached, the device will be restarted because
it uses different headroom, tailroom, and page order value.
If XDP enabled, it switches default page order value from 0 to 2.
Because the default maximum frame size is still 2K and it needs
additional area for headroom and tailroom.
The total size(headroom + frame size + tailroom) is 2624.
So, 1472Bytes will be always wasted for every frame.
But when order-2 is used, these pages can be used 6 times
with flip strategy.
It means only about 106Bytes per frame will be wasted.
Also, It supports xdp fragment feature.
MTU can be 16K if xdp prog supports xdp fragment.
If not, MTU can not exceed 2K - ETH_HLEN - ETH_FCS.
And a static key is added and It will be used to call the xdp_clean
handler in ->poll(). data plane implementation will be contained
the followed patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Platform bus adaptation for CTU CAN FD open-source IP core.
The core has been tested together with OpenCores SJA1000
modified to be CAN FD frames tolerant on MicroZed Zynq based
MZ_APO education kits designed by Petr Porazil from PiKRON.com
company. FPGA design
https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top.
The kit description at the Computer Architectures course pages
https://cw.fel.cvut.cz/wiki/courses/b35apo/documentation/mz_apo/start .
Kit carrier board and mechanics design source files
https://gitlab.com/pikron/projects/mz_apo/microzed_apo
The work is documented in Martin Jeřábek's diploma theses
Open-source and Open-hardware CAN FD Protocol Support
https://dspace.cvut.cz/handle/10467/80366
.
Link: https://lore.kernel.org/all/4d5c53499bafe7717815f948801bd5aedaa05c12.1647904780.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
PCI bus adaptation for CTU CAN FD open-source IP core.
The project providing FPGA design for Intel EP4CGX15 based DB4CGX15
PCIe board with PiKRON.com designed transceiver riser shield is available
at https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd .
Link: https://lore.kernel.org/all/a81333e206a9bcf9434797f6f54d8664775542e2.1647904780.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
independent part.
This driver adds support for the CTU CAN FD open-source IP core.
More documentation and core sources at project page
(https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core).
The core integration to Xilinx Zynq system as platform driver
is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top).
Implementation on Intel FPGA based PCI Express board is available
from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd).
More about CAN bus related projects used and developed at CTU FEE at
https://canbus.pages.fel.cvut.cz/ .
Link: https://lore.kernel.org/all/1906e4941560ae2ce4b8d181131fd4963aa31611.1647904780.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The MCP251863 device is a CAN-FD controller (MCP2518FD) with an
integrated transceiver (ATA6563). This patch add support for the new
device.
Link: https://lore.kernel.org/all/20220419072805.2840340-3-mkl@pengutronix.de
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch marks the bit timing constants as const.
Fixes: c223da689324 ("can: xilinx_can: Add support for CANFD FD frames")
Link: https://lore.kernel.org/all/20220317203119.792552-1-mkl@pengutronix.de
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Link: https://lore.kernel.org/all/20220419081449.2574026-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
powerpc's asm/prom.h brings some headers that it doesn't need itself.
In order to clean it up, first add missing headers in users of
asm/prom.h
Link: https://lore.kernel.org/all/878888f9057ad2f66ca0621a0007472bf57f3e3d.1648833432.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.
Link: https://lore.kernel.org/all/20220329201229.16279-1-kris@embeddedTS.com
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
larger ones
The CiA (CAN in Automation) lists in their Newsletter 1/2018 in the
"Recommendation for the CAN FD bit-timing" [1] article several
recommendations, one of them is:
| Recommendation 3: Choose BRPA and BRPD as low as possible
[1] https://can-newsletter.org/uploads/media/raw/f6a36d1461371a2f86ef0011a513712c.pdf
With the current bit timing algorithm Srinivas Neeli noticed that on
the Xilinx Versal ACAP board the CAN data bit timing parameters are
not calculated optimally. For most bit rates, the bit rate
prescaler (BRP) is != 1, although it's possible to configure the
requested with a bit rate with a prescaler of 1:
| Data Bit timing parameters for xilinx_can_fd2i with 79.999999 MHz ref clock (cmd-line) using algo 'v4.8'
| nominal real Bitrt nom real SampP
| Bitrate TQ[ns] PrS PhS1 PhS2 SJW BRP Bitrate Error SampP SampP Error
| 12000000 12 2 2 2 1 1 11428571 4.8% 75.0% 71.4% 4.8%
| 10000000 25 1 1 1 1 2 9999999 0.0% 75.0% 75.0% 0.0%
| 8000000 12 3 3 3 1 1 7999999 0.0% 75.0% 70.0% 6.7%
| 5000000 50 1 1 1 1 4 4999999 0.0% 75.0% 75.0% 0.0%
| 4000000 62 1 1 1 1 5 3999999 0.0% 75.0% 75.0% 0.0%
| 2000000 125 1 1 1 1 10 1999999 0.0% 75.0% 75.0% 0.0%
| 1000000 250 1 1 1 1 20 999999 0.0% 75.0% 75.0% 0.0%
The bit timing parameter calculation algorithm iterates effectively
from low to high BRP values. It selects a new best parameter set, if
the sample point error of the current parameter set is equal or less
to old best parameter set.
If the given hardware constraints (clock rate and bit timing parameter
constants) don't allow a sample point error of 0, the algorithm will
first find a valid bit timing parameter set with a low BRP, but then
will accept parameter sets with higher BRPs that have the same sample
point error.
This patch changes the algorithm to only accept a new parameter set,
if the resulting sample point error is lower. This leads to the
following data bit timing parameter for the Versal ACAP board:
| Data Bit timing parameters for xilinx_can_fd2i with 79.999999 MHz ref clock (cmd-line) using algo 'can-next'
| nominal real Bitrt nom real SampP
| Bitrate TQ[ns] PrS PhS1 PhS2 SJW BRP Bitrate Error SampP SampP Error
| 12000000 12 2 2 2 1 1 11428571 4.8% 75.0% 71.4% 4.8%
| 10000000 12 2 3 2 1 1 9999999 0.0% 75.0% 75.0% 0.0%
| 8000000 12 3 3 3 1 1 7999999 0.0% 75.0% 70.0% 6.7%
| 5000000 12 5 6 4 1 1 4999999 0.0% 75.0% 75.0% 0.0%
| 4000000 12 7 7 5 1 1 3999999 0.0% 75.0% 75.0% 0.0%
| 2000000 12 14 15 10 1 1 1999999 0.0% 75.0% 75.0% 0.0%
| 1000000 25 14 15 10 1 2 999999 0.0% 75.0% 75.0% 0.0%
Note: Due to HW constraints a data bit rate of 1 MBit/s with BRP = 1 is not possible.
Link: https://lore.kernel.org/all/20220318144913.873614-1-mkl@pengutronix.de
Link: https://lore.kernel.org/all/20220113203004.jf2rqj2pirhgx72i@pengutronix.de
Cc: Srinivas Neeli <sneeli@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_rx_offload_queue_timestamp()
This patch renames the function can_rx_offload_queue_sorted() to
can_rx_offload_queue_timestamp(). This better describes what the
function does, it adds a newly RX'ed skb to the sorted queue by its
timestamp.
Link: https://lore.kernel.org/all/20220417194327.2699059-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For each port get slot_index using PMLP register. For ports residing
on a linecard, identify it with the linecard by setting mapping
using devlink_port_linecard_set() helper. Use linecard slot index for
PMTDB register queries.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of line card implementation, the core has to have a way to
remove relevant ports manually. Extend the Spectrum driver ops by an op
that implements port removal of selected ports upon request.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to process events generated upon line card getting "ready" and
"active".
When DSDSC event with "ready" bit set is delivered, that means the
line card is powered up. Use MDDC register to push the line card to
active state. Once FW is done with that, the DSDSC event with "active"
bit set is delivered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce objects for line cards and an infrastructure around that.
Use devlink_linecard_create/destroy() to register the line card with
devlink core. Implement provisioning ops with a list of supported
line cards.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MBCT register allows to transfer binary INI codes from the host to
the management FW by transferring it by chunks of maximum 1KB.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MDDC register allows to control downstream devices and line cards.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MDDQ register allows to query the DownStream device properties.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register PMLPE trap and process the port mapping changes delivered
by it by creating related ports. Note that this happens after
provisioning. The INI of the linecard is processed and merged by FW.
PMLPE is generated for each port. Process this mapping change.
Layout of PMLPE is the same as layout of PMLP.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No need to hold the lock for alloc and freecpu. So narrow the critical
section. Follow-up patch is going to benefit from this by adding more
code to the functions which will be out of the critical as well.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PMECR register is used to enable/disable event triggering
in case of local port mapping change.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of array of pointers to port mapping structures, allocate the
array of structures directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far, the lane index always started from zero. That is not true for
modular systems with gearbox-equipped linecards. Loose the check so the
lanes can start from non-zero index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for multiple switch with OF mdio bus declaration.
Unify the bus id naming and use the same logic for both legacy and OF
mdio bus.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Restore original way to handle mdio read error by returning 0xffff.
This was wrongly changed when the internal_mdio_read was introduced,
now that both legacy and internal use the same function, make sure that
they behave the same way.
Fixes: ce062a0adbfe ("net: dsa: qca8k: fix kernel panic with legacy mdio mapping")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that dsa_switch_ops is not switch specific anymore, we can drop it
from qca8k_priv and use the static ops directly for the dsa_switch
pointer.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In an attempt to reduce qca8k_priv space, rework and simplify mdiobus
logic.
We now declare a mdiobus instead of relying on DSA phy_read/write even
if a mdio node is not present. This is all to make the qca8k ops static
and not switch specific. With a legacy implementation where port doesn't
have a phy map declared in the dts with a mdio node, we declare a
'qca8k-legacy' mdiobus. The conversion logic is used as legacy read and
write ops are used instead of the internal one.
Also drop the legacy_phy_port_mapping as we now declare mdiobus with ops
that already address the workaround.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port_sts is a thing of the past for this driver. It was something
present on the initial implementation of this driver and parts of the
original struct were dropped over time. Using an array of int to store if
a port is enabled or not to handle PM operation seems overkill. Switch
and use a simple u8 to store the port status where each bit correspond
to a port. (bit is set port is enabled, bit is not set, port is disabled)
Also add some comments to better describe why we need to track port
status.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSA set the CPU port based on the largest MTU of all the slave ports.
Based on this we can drop the MTU array from qca8k_priv and set the
port_change_mtu logic on DSA changing MTU of the CPU port as the switch
have a global MTU settingfor each port.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In review comment [1] was pointed that new code is not supposed
to set driver version and should rely on kernel version instead.
As an outcome of that comment all the dance around setting such
driver version to FW should be removed too, because in upstream
kernel whole driver will have same version so read/write from/to
FW will give same result.
[1] https://lore.kernel.org/all/YladGTmon1x3dfxI@unreal
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/5d76f3116ee795071ec044eabb815d6c2bdc7dbd.1649922731.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow multiple LTBs in the txpool's ltb_set. i.e rather than using
a single large LTB, use several smaller LTBs.
The first n-1 LTBs will all be of the same size. The size of the last
LTB in the set depends on the number of buffers and buffer (mtu) size.
This strategy hopefully allows more reuse of the initial LTBs and also
reduces the chances of an allocation failure (of the large LTB) when
system is low in memory.
Suggested-by: Brian King <brking@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
