summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-10-04Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' ↵Stephen Boyd15-224/+2101
into clk-next - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - Support for Renesas VersaClock7 clock generator family * clk-baikal: clk: baikal-t1: Convert to platform device driver clk: baikal-t1: Add DDR/PCIe directly controlled resets support dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs clk: baikal-t1: Move reset-controls code into a dedicated module clk: baikal-t1: Add SATA internal ref clock buffer clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent clk: baikal-t1: Fix invalid xGMAC PTP clock divider clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD * clk-broadcom: clk: bcm: rpi: Add support for VEC clock clk: bcm: rpi: Handle pixel clock in firmware clk: bcm: rpi: Add support HEVC clock clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: bcm2835: Round UART input clock up clk: bcm2835: Make peripheral PLLC critical * clk-vc5: clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: vc5: Use regmap_{set,clear}_bits() where appropriate clk: vc5: Check IO access results * clk-versaclock: clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings
2022-10-04Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' ↵Stephen Boyd9-55/+2331
into clk-next - More devm helpers for fixed rate registration - Add Spreadtrum UMS512 SoC clk support - Various PXA168 clk driver fixes * clk-fixed-rate: clk: fixed-rate: add devm_clk_hw_register_fixed_rate clk: asm9260: use parent index to link the reference clock * clk-spreadtrum: clk: sprd: Add clocks support for UMS512 * clk-pxa: clk: pxa: add a check for the return value of kzalloc() clk: mmp: pxa168: control shared SDH bits with separate clock dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks clk: mmp: pxa168: add clocks for SDH2 and SDH3 dt-bindings: marvell,pxa168: add clock id for SDH3 clk: mmp: pxa168: fix GPIO clock enable bits clk: mmp: pxa168: add muxes for more peripherals clk: mmp: pxa168: fix incorrect parent clocks clk: mmp: pxa168: fix const-correctness clk: mmp: pxa168: add new clocks for peripherals dt-bindings: marvell,pxa168: add clock ids for additional dividers clk: mmp: pxa168: fix incorrect dividers clk: mmp: pxa168: add additional register defines * clk-ti: clk: davinci: cfgchip: Use dev_err_probe() helper clk: davinci: pll: fix spelling typo in comment MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
2022-10-04Merge branches 'clk-rockchip', 'clk-renesas', 'clk-microchip', ↵Stephen Boyd28-256/+2328
'clk-allwinner' and 'clk-imx' into clk-next * clk-rockchip: dt-bindings: clock: rockchip: change SPDX-License-Identifier dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML clk: rockchip: Add clock controller support for RV1126 SoC dt-bindings: clock: rockchip: Document RV1126 CRU clk: rockchip: Add dt-binding header for RV1126 clk: rockchip: Add MUXTBL variant * clk-renesas: clk: renesas: r8a779g0: Add EtherAVB clocks clk: renesas: r8a779g0: Add PFC/GPIO clocks clk: renesas: r8a779g0: Add I2C clocks clk: renesas: r8a779g0: Add watchdog clock dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoC clk: renesas: r8a779f0: Add MSIOF clocks clk: renesas: r9a09g011: Add IIC clock and reset entries clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_info clk: renesas: r8a779f0: Add TMU and parent SASYNC clocks clk: renesas: r8a779f0: Add CMT clocks clk: renesas: r8a779f0: Add SDH0 clock * clk-microchip: clk: at91: sama5d2: Add Generic Clocks for UART/USART clk: microchip: add PolarFire SoC fabric clock support dt-bindings: clk: add PolarFire SoC fabric clock ids dt-bindings: clk: document PolarFire SoC fabric clocks dt-bindings: clk: rename mpfs-clkcfg binding clk: microchip: mpfs: update module authorship & licencing clk: microchip: mpfs: convert periph_clk to clk_gate clk: microchip: mpfs: convert cfg_clk to clk_divider clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo() clk: microchip: mpfs: simplify control reg access clk: microchip: mpfs: move id & offset out of clock structs clk: microchip: mpfs: add MSS pll's set & round rate MAINTAINERS: add polarfire soc reset controller reset: add polarfire soc reset support clk: microchip: mpfs: add reset controller dt-bindings: clk: microchip: mpfs: add reset controller support clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation * clk-allwinner: clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helper clk: sunxi-ng: d1: Limit PLL rates to stable ranges * clk-imx: clk: imx: scu: fix memleak on platform_device_add() fails clk: imx93: add SAI IPG clk clk: imx93: add MU1/2 clock clk: imx93: switch to use new clk gate API clk: imx: add i.MX93 clk gate clk: imx: clk-composite-93: check white_list clk: imx: clk-composite-93: check slice busy dt-bindings: clock: imx93-clock: add more MU/SAI clocks dt-bindings: clock: imx8mm: don't use multiple blank lines clk: imx8mp: tune the order of enet_qos_root_clk
2022-10-04Merge branches 'clk-samsung', 'clk-mtk', 'clk-rm', 'clk-ast' and 'clk-qcom' ↵Stephen Boyd130-3038/+17220
into clk-next - Add resets for MediaTek MT8195 PCIe and USB - Remove DaVinci DM644x and DM646x clk driver support * clk-samsung: clk: samsung: MAINTAINERS: add Krzysztof Kozlowski clk: samsung: exynos850: Implement CMU_MFCMSCL domain clk: samsung: exynos850: Implement CMU_IS domain clk: samsung: exynos850: Implement CMU_AUD domain clk: samsung: exynos850: Style fixes clk: samsung: exynosautov9: add fsys1 clock support clk: samsung: exynosautov9: add fsys0 clock support clk: samsung: exynosautov9: correct register offsets of peric0/c1 clk: samsung: exynosautov9: add missing gate clks for peric0/c1 dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL dt-bindings: clock: exynos850: Add Exynos850 CMU_IS dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1 dt-bindings: clock: exynosautov9: add fsys1 clock definitions dt-bindings: clock: exynosautov9: add fys0 clock definitions clk: samsung: exynos7885: Add TREX clocks clk: samsung: exynos7885: Implement CMU_FSYS domain dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1 clk: samsung: exynos-clkout: Use of_device_get_match_data() * clk-mtk: (42 commits) clk: mediatek: add driver for MT8365 SoC clk: mediatek: Export required common code symbols clk: mediatek: Provide mtk_devm_alloc_clk_data dt-bindings: clock: mediatek: add bindings for MT8365 SoC clk: mediatek: mt8192: deduplicate parent clock lists clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*() clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes clk: mediatek: mt8183: Add clk mux notifier for MFG mux clk: mediatek: mux: add clk notifier functions clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe clk: mediatek: gate: Export mtk_clk_register_gates_with_dev clk: mediatek: add VDOSYS1 clock dt-bindings: clk: mediatek: Add MT8195 DPI clocks ... * clk-rm: clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x * clk-ast: clk: ast2600: BCLK comes from EPLL * clk-qcom: (97 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8939: use parent_hws where possible dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc8280xp: use retention for USB power domains clk: qcom: gdsc: add missing error handling dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos clk: qcom: Add global clock controller driver for SM6375 dt-bindings: clock: add SM6375 QCOM global clock bindings clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc clk: qcom: gdsc: Fix the handling of PWRSTS_RET support clk: qcom: Add SC8280XP GPU clock controller dt-bindings: clock: Add Qualcomm SC8280XP GPU binding clk: qcom: smd: Add SM6375 clocks ...
2022-10-04Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and ↵Stephen Boyd44-263/+243
'clk-xilinx' into clk-next - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging * clk-ofnode: clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: tegra20: Fix refcount leak in tegra20_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra: Fix refcount leak in tegra210_clock_init clk: sprd: Hold reference returned by of_get_parent() clk: berlin: Add of_node_put() for of_get_parent() clk: at91: dt-compat: Hold reference returned by of_get_parent() clk: qoriq: Hold reference returned by of_get_parent() clk: oxnas: Hold reference returned by of_get_parent() clk: st: Hold reference returned by of_get_parent() clk: tegra: Add missing of_node_put() clk: meson: Hold reference returned by of_get_parent() clk: nomadik: Add missing of_node_put() * clk-bindings: dt-bindings: clock: drop minItems equal to maxItems dt-bindings: clock: gpio-gate-clock: Convert to json-schema dt-bindings: clock: Move versaclock.h to dt-bindings/clock dt-bindings: clock: Move lochnagar.h to dt-bindings/clock * clk-cleanup: clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: nxp: fix typo in comment clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clkdev: Simplify devm_clk_hw_register_clkdev() function clkdev: Remove never used devm_clk_release_clkdev() clk: Remove never used devm_of_clk_del_provider() clk: pistachio: Fix initconst confusion clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data clk: do not initialize ret clk: remove extra empty line clk: Fix comment typo clk: move from strlcpy with unused retval to strscpy * clk-zynq: clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate clk: zynqmp: Check the return type zynqmp_pm_query_data clk: zynqmp: Add a check for NULL pointer clk: zynqmp: Replaced strncpy() with strscpy() clk: zynqmp: Fix stack-out-of-bounds in strncpy` clk: zynqmp: make bestdiv unsigned * clk-xilinx: clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: clocking-wizard: Update the compatible clk: clocking-wizard: Fix the reconfig for 5.2 clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs clk: clocking-wizard: Move clocking-wizard out dt-bindings: add documentation of xilinx clocking wizard
2022-10-04clk: qcom: gcc-sm6375: Ensure unsigned long typeStephen Boyd1-1/+1
This PLL frequency needs a UL postfix to avoid compiler warnings on 32-bit architectures. Fixes: 184fdd873d83 ("clk: qcom: Add global clock controller driver for SM6375") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04clk: qcom: gcc-sm6375: Remove unused variablesKonrad Dybcio1-12/+0
gcc_parent_data_15 and gcc_parent_map_15 are not used in this driver. Remove them. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20221003211438.25691-1-konrad.dybcio@somainline.org Fixes: 184fdd873d83 ("clk: qcom: Add global clock controller driver for SM6375") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04clk: qcom: kpss-xcc: convert to parent data APIChristian Marangi1-17/+9
Convert the driver to parent data API. From the Documentation pll8_vote and pxo should be declared in the DTS so fw_name can be used instead of parent_names. .name is changed to the legacy pxo_board following how it's declared in other drivers. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220914144743.17369-2-ansuelsmth@gmail.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04clk: allow building lan966x as a moduleClément Léger2-2/+2
Set the COMMON_CLK_LAN966X option as a tristate and switch from builtin_platform_driver() to module_platform_driver() to allow building and using this driver as a module. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220617103306.489466-1-clement.leger@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04clk: clk-xgene: simplify if-if to if-elseYihao Han1-2/+2
Replace `if (!pclk->param.csr_reg)` with `else` for simplification and add curly brackets according to the kernel coding style: "Do not unnecessarily use braces where a single statement will do." ... "This does not apply if only one branch of a conditional statement is a single statement; in the latter case use braces in both branches" Please refer to: https://www.kernel.org/doc/html/v5.17-rc8/process/coding-style.html Signed-off-by: Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220408130617.14963-1-hanyihao@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04clk: ast2600: BCLK comes from EPLLJoel Stanley1-1/+1
This correction was made in the u-boot SDK recently. There are no in-tree users of this clock so the impact is minimal. Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Link: https://github.com/AspeedTech-BMC/u-boot/commit/8ad54a5ae15f27fea5e894cc2539a20d90019717 Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220421040426.171256-1-joel@jms.id.au Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-03clk: clocking-wizard: Depend on HAS_IOMEMStephen Boyd1-0/+1
This driver uses devm_platform_ioremap_resource() and thus depends on HAS_IOMEM. Add the Kconfig dependency to avoid build issues. Reported-by: kernel test robot <lkp@intel.com> Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Fixes: c822490f52da ("clk: clocking-wizard: Move clocking-wizard out") Link: https://lore.kernel.org/r/20221003202608.2611295-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-03clk: clocking-wizard: Use dev_err_probe() helperYang Yingliang1-10/+6
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220913031442.980720-1-yangyingliang@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-03clk: nxp: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-42-Julia.Lawall@inria.fr Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-03clk: pxa: add a check for the return value of kzalloc()Xiaoke Wang1-0/+2
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Link: https://lore.kernel.org/r/tencent_2B9817738F38B02844C245946EFF3B407E09@qq.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-03clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975Matthias Fend1-0/+11
Update IDT VersaClock 5 driver to support 5P49V6975. The 5P49V6975 is a member of the VersaClock 6E family and supports four fractional dividers (FODs), five clock outputs and an internal oscillator. Signed-off-by: Matthias Fend <matthias.fend@emfend.at> Link: https://lore.kernel.org/r/20220511053455.360335-2-matthias.fend@emfend.at Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: mvebu: armada-37xx-tbg: Remove the unneeded result variableye xingchen1-4/+2
Return the value of_clk_add_hw_provider() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220906072322.337253-1-ye.xingchen@zte.com.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probeMiaoqian Lin1-3/+6
pm_runtime_get_sync() will increment pm usage counter. Forgetting to putting operation will result in reference leak. Add missing pm_runtime_put_sync in some error paths. Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602030838.52057-1-linmq006@gmail.com Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: Renesas versaclock7 ccf device driverAlex Helms3-0/+1321
Renesas Versaclock7 is a family of configurable clock generator ICs with fractional and integer dividers. This driver has basic support for the RC21008A device, a clock synthesizer with a crystal input and 8 outputs. The supports changing the FOD and IOD rates, and each output can be gated. Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com> Link: https://lore.kernel.org/r/20220912183613.22213-3-alexander.helms.jy@renesas.com Tested-by: Saeed Nowshadi <saeed.nowshadi@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: ti: Balance of_node_get() calls for of_find_node_by_name()Liang He1-2/+3
In ti_find_clock_provider(), of_find_node_by_name() will call of_node_put() for the 'from' argument, possibly putting the node one too many times. Let's maintain the of_node_get() from the previous search and only put when we're exiting the function early. This should avoid a misbalanced reference count on the node. Fixes: 51f661ef9a10 ("clk: ti: Add ti_find_clock_provider() to use clock-output-names") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220915031121.4003589-1-windhl@126.com [sboyd@kernel.org: Rewrite commit text, maintain reference instead of get again] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: imx: scu: fix memleak on platform_device_add() failsLin Yujun1-1/+5
No error handling is performed when platform_device_add() fails. Add error processing before return, and modified the return value. Fixes: 77d8f3068c63 ("clk: imx: scu: add two cells binding support") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Link: https://lore.kernel.org/r/20220914033206.98046-1-linyujun809@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: vc5: Use regmap_{set,clear}_bits() where appropriateLars-Peter Clausen1-20/+15
regmap_set_bits() and regmap_clear_bits() are variations of regmap_update_bits() that can be used if all bits of the mask have to be set to either 1 or 0 respectively. Update the versaclk driver to use regmap_set_bits() and regmap_clear_bits() where appropriate. This results in slightly more compact code and also makes the intention of the code clearer which can help with review. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220719094637.844946-2-lars@metafoo.de Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: vc5: Check IO access resultsLars-Peter Clausen1-50/+91
The devices of the versaclk clock generator family use an I2C control bus. IO access on an I2C bus can fail for various reasons. The driver currently ignores the return value of most IO operations. This results in silent failure. To avoid this check the return value and in case of an error abort the operation and propagate the error code to the caller. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220719094637.844946-1-lars@metafoo.de Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: mediatek: add driver for MT8365 SoCFabien Parent9-0/+1614
Add clock drivers for MT8365 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20220822152652.3499972-5-msp@baylibre.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: mediatek: Export required common code symbolsMarkus Schneider-Pargmann1-0/+2
To make clk-mt8365 compilable as a module there are a few function symbols missing. This patch adds the required EXPORT_SYMBOL_GPL to the functions. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20220822152652.3499972-4-msp@baylibre.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: mediatek: Provide mtk_devm_alloc_clk_dataMarkus Schneider-Pargmann2-5/+30
Provide a helper that replaces the kzalloc with devm_kzalloc so error handling gets easier. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20220822152652.3499972-3-msp@baylibre.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clkdev: Simplify devm_clk_hw_register_clkdev() functionAndy Shevchenko1-14/+10
Use devm_add_action_or_reset() instead of devres_alloc() and devres_add(), which works the same. This will simplify the code. There is no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220623115719.52683-3-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clkdev: Remove never used devm_clk_release_clkdev()Andy Shevchenko1-34/+0
For the entire history of the devm_clk_release_clkdev() existence (since 2018) it was never used. Remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220623115719.52683-2-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: Remove never used devm_of_clk_del_provider()Andy Shevchenko1-26/+0
For the entire history of the devm_of_clk_del_provider) existence (since 2017) it was never used. Remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220623115719.52683-1-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: bcm: rpi: Add support for VEC clockDom Cobley1-0/+5
Platform driver clk-bcm2835 gets an inaccurate clock for VEC (107MHz). Export VEC clock trough clk-raspberrypi which uses the right PLL to get an accurate 108MHz. Signed-off-by: Dom Cobley <popcornmix@gmail.com> [iivanov: Adapted on top of v5.17-rc6] Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20220829152154.147250-4-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: bcm: rpi: Handle pixel clock in firmwareIvan T. Ivanov1-0/+3
The clk-bcm2835 handling of the pixel clock does not function correctly when the HDMI power domain is disabled. The firmware supports it correctly, so add it to the firmware clock driver. Acked-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20220829152154.147250-3-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: bcm: rpi: Add support HEVC clockIvan T. Ivanov1-0/+3
Export clock required for RPiVid video decoder hardware. Cc: Dom Cobley <popcornmix@gmail.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20220829152154.147250-2-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: bcm2835: fix bcm2835_clock_rate_from_divisor declarationStefan Wahren1-3/+3
The return value of bcm2835_clock_rate_from_divisor is always unsigned and also all caller expect this. So fix the declaration accordingly. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220904141037.38816-1-stefan.wahren@i2se.com Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: bcm2835: Round UART input clock upIvan T. Ivanov1-2/+33
It was reported that RPi3[1] and RPi Zero 2W boards have issues with the Bluetooth. It turns out that when switching from initial to operation speed host and device no longer can talk each other because host uses incorrect UART baud rate. The UART driver used in this case is amba-pl011. Original fix, see below Github link[2], was inside pl011 module, but somehow it didn't look as the right place to fix. Beside that this original rounding function is not exactly perfect for all possible clock values. So I deiced to move the hack to the platform which actually need it. The UART clock is initialised to be as close to the requested frequency as possible without exceeding it. Now that there is a clock manager that returns the actual frequencies, an expected 48MHz clock is reported as 47999625. If the requested baud rate == requested clock/16, there is no headroom and the slight reduction in actual clock rate results in failure. If increasing a clock by less than 0.1% changes it from ..999.. to ..000.., round it up. [1] https://bugzilla.suse.com/show_bug.cgi?id=1188238 [2] https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7 Cc: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220912081306.24662-1-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: bcm2835: Make peripheral PLLC criticalMaxime Ripard1-1/+1
When testing for a series affecting the VEC, it was discovered that turning off and on the VEC clock is crashing the system. It turns out that, when disabling the VEC clock, it's the only child of the PLLC-per clock which will also get disabled. The source of the crash is PLLC-per being disabled. It's likely that some other device might not take a clock reference that it actually needs, but it's unclear which at this point. Let's make PLLC-per critical so that we don't have that crash. Reported-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: baikal-t1: Convert to platform device driverSerge Semin4-54/+226
In accordance with the way the MIPS platform is normally design there are only six clock sources which need to be available on the kernel start in order to one end up booting correctly: + CPU PLL: needed by the r4k and MIPS GIC timer drivers. The former one is initialized by the arch code, while the later one is implemented in the mips-gic-timer.c driver as the OF-declared timer. + PCIe PLL: required as a parental clock source for the APB/timer domains. + APB clock: needed in order to access all the SoC CSRs at least for the timer OF-declared drivers. + APB Timer{0-2} clocks: these are the DW APB timers which drivers dw_apb_timer_of.c are implemented as the OF-declared timers. So as long as the clocks above are available early the kernel will normally work. Let's convert the Baikal-T1 CCU drivers to the platform device drivers keeping that in mind. Generally speaking the conversion isn't that complicated since the driver infrastructure has been designed as flexible enough for that. First we need to add a new PLL/Divider clock features flag which indicates the corresponding clock source as a basic one and that clock sources will be available on the kernel early boot stages. Second the internal PLL/Divider descriptors need to be initialized with -EPROBE_DEFER value as the corresponding clock source is unavailable at the early stages. They will be allocated and initialized on the Baikal-T1 clock platform driver probe procedure. Finally the already available PLL/Divider init functions need to be split up into two ones: init procedure performed in the framework of the OF-declared clock initialization (of_clk_init()), and the probe procedure called by the platform devices bus driver. Note the later method will just continue the system clocks initialization started in the former one. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-9-Sergey.Semin@baikalelectronics.ru [sboyd@kernel.org: Remove module things because the Kconfig is still bool] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: baikal-t1: Add DDR/PCIe directly controlled resets supportSerge Semin2-0/+76
Aside with a set of the trigger-like resets Baikal-T1 CCU provides two additional blocks with directly controlled reset signals. In particular it concerns DDR full and initial resets and various PCIe sub-domains resets. Let's add the direct reset assertion/de-assertion of the corresponding flags support into the Baikal-T1 CCU driver then. It will be required at least for the PCIe platform driver. Obviously the DDR controller isn't supposed to be fully reset in the kernel, so the corresponding controls are added just for the sake of the interface implementation completeness. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220929225402.9696-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: baikal-t1: Move reset-controls code into a dedicated moduleSerge Semin7-105/+231
Before adding the directly controlled resets support it's reasonable to move the existing resets control functionality into a dedicated object for the sake of the CCU dividers clock driver simplification. After the new functionality was added clk-ccu-div.c would have got to a mixture of the weakly dependent clocks and resets methods. Splitting the methods up into the two objects will make the code easier to read and maintain. It shall also improve the code scalability (though hopefully we won't need this part that much in the future). The reset control functionality is now implemented in the framework of a single unit since splitting it up doesn't make much sense due to relatively simple reset operations. The ccu-rst.c has been designed to be looking like ccu-div.c or ccu-pll.c with two globally available methods for the sake of the code unification and better code readability. This commit doesn't provide any change in the CCU reset implementation semantics. As before the driver will support the trigger-like CCU resets only, which are responsible for the AXI-bus, APB-bus and SATA-ref blocks reset. The assert/de-assert-capable reset controls support will be added in the next commit. Note the CCU Clock dividers and resets functionality split up was possible due to not having any side-effects (at least we didn't found ones) of the regmap-based concurrent access of the common CCU dividers/reset CSRs. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220929225402.9696-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: baikal-t1: Add SATA internal ref clock bufferSerge Semin3-1/+85
It turns out the internal SATA reference clock signal will stay unavailable for the SATA interface consumer until the buffer on it's way is ungated. So aside with having the actual clock divider enabled we need to ungate a buffer placed on the signal way to the SATA controller (most likely some rudiment from the initial SoC release). Seeing the switch flag is placed in the same register as the SATA-ref clock divider at a non-standard ffset, let's implement it as a separate clock controller with the set-rate propagation to the parental clock divider wrapper. As such we'll be able to disable/enable and still change the original clock source rate. Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parentSerge Semin3-3/+12
Baikal-T1 CCU reference manual says that both xGMAC reference and xGMAC PTP clocks are generated by two different wrappers with the same constant divider thus each producing a 156.25 MHz signal. But for some reason both of these clock sources are gated by a single switch-flag in the CCU registers space - CCU_SYS_XGMAC_BASE.BIT(0). In order to make the clocks handled independently we need to define a shared parental gate so the base clock signal would be switched off only if both of the child-clocks are disabled. Note the ID is intentionally set to -2 since we are going to add a one more internal clock identifier in the next commit. Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: baikal-t1: Fix invalid xGMAC PTP clock dividerSerge Semin1-1/+1
Most likely due to copy-paste mistake the divider has been set to 10 while according to the SoC reference manual it's supposed to be 8 thus having PTP clock frequency of 156.25 MHz. Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: vc5: Fix 5P49V6901 outputs disabling when enabling FODSerge Semin1-1/+1
We have discovered random glitches during the system boot up procedure. The problem investigation led us to the weird outcomes: when none of the Renesas 5P49V6901 ports are explicitly enabled by the kernel driver, the glitches disappeared. It was a mystery since the SoC external clock domains were fed with different 5P49V6901 outputs. The driver code didn't seem like bogus either. We almost despaired to find out a root cause when the solution has been found for a more modern revision of the chip. It turned out the 5P49V6901 clock generator stopped its output for a short period of time during the VC5_OUT_DIV_CONTROL register writing. The same problem was found for the 5P49V6965 revision of the chip and was successfully fixed in commit fc336ae622df ("clk: vc5: fix output disabling when enabling a FOD") by enabling the "bypass_sync" flag hidden inside "Unused Factory Reserved Register". Even though the 5P49V6901 registers description and programming guide doesn't provide any intel regarding that flag, setting it up anyway in the officially unused register completely eliminated the denoted glitches. Thus let's activate the functionality submitted in commit fc336ae622df ("clk: vc5: fix output disabling when enabling a FOD") for the Renesas 5P49V6901 chip too in order to remove the ports implicit inter-dependency. Fixes: dbf6b16f5683 ("clk: vc5: Add support for IDT VersaClock 5P49V6901") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20220929225402.9696-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: davinci: cfgchip: Use dev_err_probe() helperYang Yingliang1-2/+1
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220913032228.985852-1-yangyingliang@huawei.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: davinci: pll: fix spelling typo in commentJiangshan Yi1-1/+1
Fix spelling typo in comment. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Link: https://lore.kernel.org/r/20220905065833.1831473-1-13667453960@163.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: control shared SDH bits with separate clockDoug Brown1-4/+7
The PXA168 has a peculiar setup with the AXI clock enable control for the SDHC controllers. The bits in the SDH0 register control the AXI clock enable for both SDH0 and SDH1. Likewise, the bits in the SDH2 register control both SDH2 and SDH3. This is modeled with two new parentless clocks that control the shared bits. Previously, SDH0 had to be enabled in order for SDH1 to be used, and when SDH1 was enabled, unused bits in the SDH1 register were being controlled. This fixes those issues. A future commit will add support for these new shared clocks to be enabled by the PXA168 SDHC driver. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-13-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: add clocks for SDH2 and SDH3Doug Brown1-0/+6
The PXA168 has four SDHC peripherals. This commit adds the last two. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-11-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix GPIO clock enable bitsDoug Brown1-1/+1
According to the datasheet, only bit 0 of APBC_GPIO should be controlled for the clock enable. Bit 1 is marked as reserved (always write 0). Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-9-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: add muxes for more peripheralsDoug Brown1-10/+32
The TWSI, KPC, PWM, and DFC peripherals didn't have their muxes modeled in the code, but the PXA168 datasheet shows that they are indeed muxed: - TWSI can be 31.2 MHz or 62.4 MHz - KPC can be 32 kHz, 16 kHz, or 26 MHz - PWM can be 13 MHz or 32 kHz - DFC can be 156 MHz or 78 MHz Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-8-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix incorrect parent clocksDoug Brown1-6/+6
The UART, SDHC, LCD, and CCIC peripherals' muxed parent clocks didn't match the information provided by the PXA168 datasheet: - The UART clocks can be 58.5 MHz or the UART PLL. Previously, the first mux option was being calculated as 117 MHz, confirmed on hardware to be incorrect. - The SDHC clocks can be 48 MHz, 52 MHz, or 78 MHz. Previously, 48 MHz and 52 MHz were swapped. 78 MHz wasn't listed as an option. - The LCD clock can be 624 MHz or 312 Mhz. Previously, it was being calculated as 312 MHz or 52 MHz. - The CCIC clock can be 156 MHz or 78 MHz. Previously, it was being calculated as 312 MHz or 52 MHz. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-7-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix const-correctnessDoug Brown1-7/+7
While working on this series of patches, checkpatch recommended that an extra const should be added to the mux parent arrays. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-6-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-15 02:06:28 +0300