summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-10-13rtc: k3: Use devm_clk_get_enabled() helperChristophe JAILLET1-18/+4
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 12843 4804 64 17711 452f drivers/rtc/rtc-ti-k3.o down to: 12523 4804 64 17391 43ef drivers/rtc/rtc-ti-k3.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/601288834ab71c0fddde7eedd8cdb8001254ed7e.1661329498.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: jz4740: Use devm_clk_get_enabled() helperChristophe JAILLET1-22/+3
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). As a side effect, some error messages are not logged anymore, so also use dev_err_probe() instead of dev_err() in case of error. At least the error code will be logged (and -EPROBE_DEFER will be filtered) Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 9025 2488 128 11641 2d79 drivers/rtc/rtc-jz4740.o down to: 8267 2080 128 10475 28eb drivers/rtc/rtc-jz4740.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/af10570000d7e103d70bbea590ce8df4f8902b67.1661330532.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: mpfs: Use devm_clk_get_enabled() helperChristophe JAILLET1-18/+1
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). That said, mpfs_rtc_init_clk() is the same as devm_clk_get_enabled(), so use this function directly instead. This also fixes an (unlikely) unchecked devm_add_action_or_reset() error. Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 5330 2208 0 7538 1d72 drivers/rtc/rtc-mpfs.o down to: 5074 2208 0 7282 1c72 drivers/rtc/rtc-mpfs.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/e55c959f2821a2c367a4c5de529a638b1cc6b8cd.1661329086.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: ds1685: Fix spelling of function name in comment blockColin Ian King1-1/+1
The function name is missing the letter 'd' in the comment block. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20221003153711.271630-1-colin.i.king@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: switch to using regmap APIRasmus Villemoes2-85/+26
The regmap abstraction allows us to avoid the private i2c transfer helpers, and also offers some nice utility functions such as the regmap_update_bits family. While at it, simplify the code even more by not keeping track of ->write_enabled: rtc_set_time is not a hot path, so one extra i2c read doesn't hurt (regmap_update_bits elides the write when the bits are already as desired). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-9-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: drop redundant write to HR registerRasmus Villemoes1-14/+0
There's nothing in the data sheet that says writing to one of the time keeping registers is necessary to start the RTC. It does so at the stop condition of the i2c transfer setting the WRTC bit: Upon initialization or power-up, the WRTC must be set to "1" to enable the RTC. Upon the completion of a valid write (STOP), the RTC starts counting. Moreover, even if such a write to one of the timekeeping registers was necessary, that's exactly what we do anyway just below when we actually write the given struct rtc_time to the device. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-8-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()Rasmus Villemoes1-3/+2
As another preparation for removing direct references to the i2c_client in the helper functions, stash a pointer to the private data via dev_set_drvdata() instead of i2c_set_clientdata(). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-7-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: use %ptRRasmus Villemoes1-10/+2
Simplify the code and make the output format consistent with other RTC drivers by standardizing on using the %ptR printf extension. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-6-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: simplify some expressionsRasmus Villemoes1-4/+4
These instances of '&client->dev' might as well be spelled 'dev', since 'client' has been computed from 'dev' via 'client = to_i2c_client(dev)'. Later patches will get rid of that local variable 'client', so remove these unnecessary references so those later patches become easier to read. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-5-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: drop a dev_info()Rasmus Villemoes1-3/+0
This dev_info() seems to be a debug leftover, and it would only get printed once (or, once per battery change). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-4-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: specify range_min and range_maxRasmus Villemoes1-0/+2
The isl12022 can (only) keep track of times in the range 2000-2099. The data sheet says The calendar registers track date, month, year, and day of the week and are accurate through 2099, with automatic leap year correction. The lower bound of 2000 is obtained by simply observing that its YR register only counts from 00 through 99. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-3-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: stop using deprecated devm_rtc_device_register()Rasmus Villemoes1-4/+7
The comments say that devm_rtc_device_register() is deprecated and that one should instead use devm_rtc_allocate_device() and [devm_]rtc_register_device. So do that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-2-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()Lin Yujun1-0/+2
Use platform_device_put() to free platform device before print error message when platform_device_add() fails to run. Fixes: 1a71fb84fda6 ("rtc: stmp3xxx: add wdt-accessor function") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reviewed-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20220915065253.43668-1-linyujun809@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds37-2211/+4347
Pull VFIO updates from Alex Williamson: - Prune private items from vfio_pci_core.h to a new internal header, fix missed function rename, and refactor vfio-pci interrupt defines (Jason Gunthorpe) - Create consistent naming and handling of ioctls with a function per ioctl for vfio-pci and vfio group handling, use proper type args where available (Jason Gunthorpe) - Implement a set of low power device feature ioctls allowing userspace to make use of power states such as D3cold where supported (Abhishek Sahu) - Remove device counter on vfio groups, which had restricted the page pinning interface to singleton groups to account for limitations in the type1 IOMMU backend. Document usage as limited to emulated IOMMU devices, ie. traditional mdev devices where this restriction is consistent (Jason Gunthorpe) - Correct function prefix in hisi_acc driver incurred during previous refactoring (Shameer Kolothum) - Correct typo and remove redundant warning triggers in vfio-fsl driver (Christophe JAILLET) - Introduce device level DMA dirty tracking uAPI and implementation in the mlx5 variant driver (Yishai Hadas & Joao Martins) - Move much of the vfio_device life cycle management into vfio core, simplifying and avoiding duplication across drivers. This also facilitates adding a struct device to vfio_device which begins the introduction of device rather than group level user support and fills a gap allowing userspace identify devices as vfio capable without implicit knowledge of the driver (Kevin Tian & Yi Liu) - Split vfio container handling to a separate file, creating a more well defined API between the core and container code, masking IOMMU backend implementation from the core, allowing for an easier future transition to an iommufd based implementation of the same (Jason Gunthorpe) - Attempt to resolve race accessing the iommu_group for a device between vfio releasing DMA ownership and removal of the device from the IOMMU driver. Follow-up with support to allow vfio_group to exist with NULL iommu_group pointer to support existing userspace use cases of holding the group file open (Jason Gunthorpe) - Fix error code and hi/lo register manipulation issues in the hisi_acc variant driver, along with various code cleanups (Longfang Liu) - Fix a prior regression in GVT-g group teardown, resulting in unreleased resources (Jason Gunthorpe) - A significant cleanup and simplification of the mdev interface, consolidating much of the open coded per driver sysfs interface support into the mdev core (Christoph Hellwig) - Simplification of tracking and locking around vfio_groups that fall out from previous refactoring (Jason Gunthorpe) - Replace trivial open coded f_ops tests with new helper (Alex Williamson) * tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits) vfio: More vfio_file_is_group() use cases vfio: Make the group FD disassociate from the iommu_group vfio: Hold a reference to the iommu_group in kvm for SPAPR vfio: Add vfio_file_is_group() vfio: Change vfio_group->group_rwsem to a mutex vfio: Remove the vfio_group->users and users_comp vfio/mdev: add mdev available instance checking to the core vfio/mdev: consolidate all the description sysfs into the core code vfio/mdev: consolidate all the available_instance sysfs into the core code vfio/mdev: consolidate all the name sysfs into the core code vfio/mdev: consolidate all the device_api sysfs into the core code vfio/mdev: remove mtype_get_parent_dev vfio/mdev: remove mdev_parent_dev vfio/mdev: unexport mdev_bus_type vfio/mdev: remove mdev_from_dev vfio/mdev: simplify mdev_type handling vfio/mdev: embedd struct mdev_parent in the parent data structure vfio/mdev: make mdev.h standalone includable drm/i915/gvt: simplify vgpu configuration management drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types ...
2022-10-13i3c: master: Remove the wrong place of reattach.Billy Tsai1-4/+0
The reattach should be used when an I3C device has its address changed. But the modified place in this patch doesn't have the address changed of the newdev. This wrong reattach will reserve the same address slot twice and return unexpected -EBUSY when the bus find the duplicate device with diffent dynamic address. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20220926105145.8145-2-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13i3c: master: Free the old_dyn_addr when reattach.Billy Tsai1-0/+3
This patch is used to free the old_dyn_addr when the caller want to reattach the device to the different dynamic address. If the old_dyn_addr is 0 the function will treat it as no old_dyn_addr is reserved on the bus. Without the patch, when the driver reattach the i3c device after setnewda the old_dyn_addr will be permanently occupied. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20220926105145.8145-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13Merge tag 'for-linus-6.1-rc1-tag' of ↵Linus Torvalds6-182/+178
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - Some minor typo fixes - A fix of the Xen pcifront driver for supporting the device model to run in a Linux stub domain - A cleanup of the pcifront driver - A series to enable grant-based virtio with Xen on x86 - A cleanup of Xen PV guests to distinguish between safe and faulting MSR accesses - Two fixes of the Xen gntdev driver - Two fixes of the new xen grant DMA driver * tag 'for-linus-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum" xen/pv: support selecting safe/unsafe msr accesses xen/pv: refactor msr access functions to support safe and unsafe accesses xen/pv: fix vendor checks for pmu emulation xen/pv: add fault recovery control to pmu msr accesses xen/virtio: enable grant based virtio on x86 xen/virtio: use dom0 as default backend for CONFIG_XEN_VIRTIO_FORCE_GRANT xen/virtio: restructure xen grant dma setup xen/pcifront: move xenstore config scanning into sub-function xen/gntdev: Accommodate VMA splitting xen/gntdev: Prevent leaking grants xen/virtio: Fix potential deadlock when accessing xen_grant_dma_devices xen/virtio: Fix n_pages calculation in xen_grant_dma_map(unmap)_page() xen/xenbus: Fix spelling mistake "hardward" -> "hardware" xen-pcifront: Handle missed Connected state
2022-10-12Merge tag 'loongarch-6.1' of ↵Linus Torvalds5-0/+659
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Use EXPLICIT_RELOCS (ABIv2.0) - Use generic BUG() handler - Refactor TLB/Cache operations - Add qspinlock support - Add perf events support - Add kexec/kdump support - Add BPF JIT support - Add ACPI-based laptop driver - Update the default config file * tag 'loongarch-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits) LoongArch: Update Loongson-3 default config file LoongArch: Add ACPI-based generic laptop driver LoongArch: Add BPF JIT support LoongArch: Add some instruction opcodes and formats LoongArch: Move {signed,unsigned}_imm_check() to inst.h LoongArch: Add kdump support LoongArch: Add kexec support LoongArch: Use generic BUG() handler LoongArch: Add SysRq-x (TLB Dump) support LoongArch: Add perf events support LoongArch: Add qspinlock support LoongArch: Use TLB for ioremap() LoongArch: Support access filter to /dev/mem interface LoongArch: Refactor cache probe and flush methods LoongArch: mm: Refactor TLB exception handlers LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules LoongArch: Support PC-relative relocations in modules LoongArch: Define ELF relocation types added in ABIv2.0 LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCS ...
2022-10-12Merge tag 'irq-core-2022-10-12' of ↵Linus Torvalds12-109/+605
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-10-12drm/amd/display: Add HUBP surface flip interrupt handlerAurabindo Pillai1-0/+1
Add the hubp surface flip handler. This fixes some flip timeout issues. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-12nvme-multipath: fix possible hang in live ns resize with ANA accessSagi Grimberg1-0/+1
When we revalidate paths as part of ns size change (as of commit e7d65803e2bb), it is possible that during the path revalidation, the only paths that is IO capable (i.e. optimized/non-optimized) are the ones that ns resize was not yet informed to the host, which will cause inflight requests to be requeued (as we have available paths but none are IO capable). These requests on the requeue list are waiting for someone to resubmit them at some point. The IO capable paths will eventually notify the ns resize change to the host, but there is nothing that will kick the requeue list to resubmit the queued requests. Fix this by always kicking the requeue list, and if no IO capable path exists, these requests will be queued again. A typical log that indicates that IOs are requeued: -- nvme nvme1: creating 4 I/O queues. nvme nvme1: new ctrl: "testnqn1" nvme nvme2: creating 4 I/O queues. nvme nvme2: mapped 4/0/0 default/read/poll queues. nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009 nvme nvme1: rescanning namespaces. nvme1n1: detected capacity change from 2097152 to 4194304 block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O block nvme1n1: no usable path - requeuing I/O nvme nvme2: rescanning namespaces. -- Reported-by: Yogev Cohen <yogev@lightbitslabs.com> Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDsXi Ruoyao1-0/+2
ZHITAI TiPro5000 SSDs has the same APST sleep problem as its cousin, TiPro7000. The quirk for TiPro7000 has been added in commit 6b961bce50e4 ("nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs"), use the same quirk for TiPro5000. The ASPT data from "nvme id-ctrl /dev/nvme1": vid : 0x1e49 ssvid : 0x1e49 sn : ZTA21T0KA2227304LM mn : ZHITAI TiPlus5000 1TB fr : ZTA09139 [...] ps 0 : mp:6.50W operational enlat:0 exlat:0 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 1 : mp:5.80W operational enlat:0 exlat:0 rrt:1 rrl:1 rwt:1 rwl:1 idle_power:- active_power:- ps 2 : mp:3.60W operational enlat:0 exlat:0 rrt:2 rrl:2 rwt:2 rwl:2 idle_power:- active_power:- ps 3 : mp:0.0500W non-operational enlat:5000 exlat:10000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0025W non-operational enlat:8000 exlat:45000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- Reported-and-tested-by: Chang Feng <flukehn@gmail.com> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760Abhijit1-0/+2
Add a quirk to fix Lexar NM760 SSD drives reporting duplicate nsids. Signed-off-by: Abhijit <abhijit@abhijittomar.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12nvme-tcp: fix possible hang caused during ctrl deletionSagi Grimberg1-1/+1
When we delete a controller, we execute the following: 1. nvme_stop_ctrl() - stop some work elements that may be inflight or scheduled (specifically also .stop_ctrl which cancels ctrl error recovery work) 2. nvme_remove_namespaces() - which first flushes scan_work to avoid competing ns addition/removal 3. continue to teardown the controller However, if err_work was scheduled to run in (1), it is designed to cancel any inflight I/O, particularly I/O that is originating from ns scan_work in (2), but because it is cancelled in .stop_ctrl(), we can prevent forward progress of (2) as ns scanning is blocking on I/O (that will never be cancelled). The race is: 1. transport layer error observed -> err_work is scheduled 2. scan_work executes, discovers ns, generate I/O to it 3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work) - err_work never executed 4. nvme_remove_namespaces() -> flush_work(scan_work) --> deadlock, because scan_work is blocked on I/O that was supposed to be cancelled by err_work, but was cancelled before executing (see stack trace [1]). Fix this by flushing err_work instead of cancelling it, to force it to execute and cancel all inflight I/O. [1]: -- Call Trace: <TASK> __schedule+0x390/0x910 ? scan_shadow_nodes+0x40/0x40 schedule+0x55/0xe0 io_schedule+0x16/0x40 do_read_cache_page+0x55d/0x850 ? __page_cache_alloc+0x90/0x90 read_cache_page+0x12/0x20 read_part_sector+0x3f/0x110 amiga_partition+0x3d/0x3e0 ? osf_partition+0x33/0x220 ? put_partition+0x90/0x90 bdev_disk_changed+0x1fe/0x4d0 blkdev_get_whole+0x7b/0x90 blkdev_get_by_dev+0xda/0x2d0 device_add_disk+0x356/0x3b0 nvme_mpath_set_live+0x13c/0x1a0 [nvme_core] ? nvme_parse_ana_log+0xae/0x1a0 [nvme_core] nvme_update_ns_ana_state+0x3a/0x40 [nvme_core] nvme_mpath_add_disk+0x120/0x160 [nvme_core] nvme_alloc_ns+0x594/0xa00 [nvme_core] nvme_validate_or_alloc_ns+0xb9/0x1a0 [nvme_core] ? __nvme_submit_sync_cmd+0x1d2/0x210 [nvme_core] nvme_scan_work+0x281/0x410 [nvme_core] process_one_work+0x1be/0x380 worker_thread+0x37/0x3b0 ? process_one_work+0x380/0x380 kthread+0x12d/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> INFO: task nvme:6725 blocked for more than 491 seconds. Not tainted 5.15.65-f0.el7.x86_64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:nvme state:D stack: 0 pid: 6725 ppid: 1761 flags:0x00004000 Call Trace: <TASK> __schedule+0x390/0x910 ? sched_clock+0x9/0x10 schedule+0x55/0xe0 schedule_timeout+0x24b/0x2e0 ? try_to_wake_up+0x358/0x510 ? finish_task_switch+0x88/0x2c0 wait_for_completion+0xa5/0x110 __flush_work+0x144/0x210 ? worker_attach_to_pool+0xc0/0xc0 flush_work+0x10/0x20 nvme_remove_namespaces+0x41/0xf0 [nvme_core] nvme_do_delete_ctrl+0x47/0x66 [nvme_core] nvme_sysfs_delete.cold.96+0x8/0xd [nvme_core] dev_attr_store+0x14/0x30 sysfs_kf_write+0x38/0x50 kernfs_fop_write_iter+0x146/0x1d0 new_sync_write+0x114/0x1b0 ? intel_pmu_handle_irq+0xe0/0x420 vfs_write+0x18d/0x270 ksys_write+0x61/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x61/0xcb -- Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12nvme-rdma: fix possible hang caused during ctrl deletionSagi Grimberg1-1/+1
When we delete a controller, we execute the following: 1. nvme_stop_ctrl() - stop some work elements that may be inflight or scheduled (specifically also .stop_ctrl which cancels ctrl error recovery work) 2. nvme_remove_namespaces() - which first flushes scan_work to avoid competing ns addition/removal 3. continue to teardown the controller However, if err_work was scheduled to run in (1), it is designed to cancel any inflight I/O, particularly I/O that is originating from ns scan_work in (2), but because it is cancelled in .stop_ctrl(), we can prevent forward progress of (2) as ns scanning is blocking on I/O (that will never be cancelled). The race is: 1. transport layer error observed -> err_work is scheduled 2. scan_work executes, discovers ns, generate I/O to it 3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work) - err_work never executed 4. nvme_remove_namespaces() -> flush_work(scan_work) --> deadlock, because scan_work is blocked on I/O that was supposed to be cancelled by err_work, but was cancelled before executing. Fix this by flushing err_work instead of cancelling it, to force it to execute and cancel all inflight I/O. Fixes: b435ecea2a4d ("nvme: Add .stop_ctrl to nvme ctrl ops") Fixes: f6c8e432cb04 ("nvme: flush namespace scanning work just before removing namespaces") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-12LoongArch: Add ACPI-based generic laptop driverJianmin Lv5-0/+659
This add ACPI-based generic laptop driver for Loongson-3. Some of the codes are derived from drivers/platform/x86/thinkpad_acpi.c. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12net/mlx5: Make ASO poll CQ usable in atomic contextLeon Romanovsky4-13/+11
Poll CQ functions shouldn't sleep as they are called in atomic context. The following splat appears once the mlx5_aso_poll_cq() is used in such flow. BUG: scheduling while atomic: swapper/17/0/0x00000100 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core fuse [last unloaded: mlx5_core] CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W 6.0.0-rc2+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 __schedule_bug.cold+0x47/0x53 __schedule+0x4b6/0x670 ? hrtimer_start_range_ns+0x28d/0x360 schedule+0x50/0x90 schedule_hrtimeout_range_clock+0x98/0x120 ? __hrtimer_init+0xb0/0xb0 usleep_range_state+0x60/0x90 mlx5_aso_poll_cq+0xad/0x190 [mlx5_core] mlx5e_ipsec_aso_update_curlft+0x81/0xb0 [mlx5_core] xfrm_timer_handler+0x6b/0x360 ? xfrm_find_acq_byseq+0x50/0x50 __hrtimer_run_queues+0x139/0x290 hrtimer_run_softirq+0x7d/0xe0 __do_softirq+0xc7/0x272 irq_exit_rcu+0x87/0xb0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:default_idle+0x18/0x20 Code: ae 7d ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 8b 05 b5 30 0d 01 85 c0 7e 07 0f 00 2d 0a e3 53 00 fb f4 <c3> 0f 1f 80 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 80 ad 01 00 RSP: 0018:ffff888100883ee0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffff888100849580 RCX: 4000000000000000 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000008863c RBP: 0000000000000011 R08: 00000064e6977fa9 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 default_idle_call+0x37/0xb0 do_idle+0x1cd/0x1e0 cpu_startup_entry+0x19/0x20 start_secondary+0xfe/0x120 secondary_startup_64_no_verify+0xcd/0xdb </TASK> softirq: huh, entered softirq 8 HRTIMER 00000000a97c08cb with preempt_count 00000100, exited with 00000000? Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12Merge tag 'irqchip-fixes-6.1-1' of ↵Thomas Gleixner3-28/+68
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip fixes from Marc Zyngier: - Fix IMX-MU Kconfig, keeping it private to IMX - Fix a register offset for the same IMX-MU driver - Fix the ls-extirq irqchip driver that would use the wrong flavour of spinlocks Link: https://lore.kernel.org/r/20221012075125.1244143-1-maz@kernel.org
2022-10-12net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused portsMatthias Schiffer1-1/+4
am65_cpsw_nuss_register_ndevs() skips calling devlink_port_type_eth_set() for ports without assigned netdev, triggering the following warning when DEVLINK_PORT_TYPE_WARN_TIMEOUT elapses after 3600s: Type was not set for devlink port. WARNING: CPU: 0 PID: 129 at net/core/devlink.c:8095 devlink_port_type_warn+0x18/0x30 Fixes: 0680e20af5fb ("net: ethernet: ti: am65-cpsw: Fix devlink port register sequence") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12irqchip: IMX_MU_MSI should depend on ARCH_MXCGeert Uytterhoeven1-3/+4
The Freescale/NXP i.MX Messaging Unit is only present on Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale/NXP i.MX SoC family support. While at it, expand "MU" to "Messaging Unit" in the help text. Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/7f3bd932614ddbff46a1b750ef45b231130364ad.1664900434.git.geert+renesas@glider.be
2022-10-12xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum"Colin Ian King1-1/+1
There is a spelling mistake in a Kconfig description. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221007203500.2756787-1-colin.i.king@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-10-12Merge tag 'drm-intel-next-fixes-2022-10-06-1' of ↵Dave Airlie6-38/+100
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Round to closest in g4x+ HDMI clock readout (Ville Syrjälä) - Update MOCS table for EHL (Tejas Upadhyay) - Fix PSR_IMR/IIR field handling (Jouni Högander) - Fix watermark calculations for gen12+ RC CCS modifier (Ville Syrjälä) - Fix watermark calculations for gen12+ MC CCS modifier (Ville Syrjälä) - Fix watermark calculations for gen12+ CCS+CC modifier (Ville Syrjälä) - Fix watermark calculations for DG2 CCS modifiers (Ville Syrjälä) - Fix watermark calculations for DG2 CCS+CC modifier (Ville Syrjälä) - Reject excessive dotclocks early (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yz6rkXI9HKFUvtWK@tursulin-desk
2022-10-12Merge tag 'wireless-2022-10-11' of ↵Jakub Kicinski7-19/+31
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.1 First set of fixes for v6.1. Quite a lot of fixes in stack but also for mt76. cfg80211/mac80211 - fix locking error in mac80211's hw addr change - fix TX queue stop for internal TXQs - handling of very small (e.g. STP TCN) packets - two memcpy() hardening fixes - fix probe request 6 GHz capability warning - fix various connection prints - fix decapsulation offload for AP VLAN mt76 - fix rate reporting, LLC packets and receive checksum offload on specific chipsets iwlwifi - fix crash due to list corruption ath11k - fix a compiler warning with GCC 11 and KASAN * tag 'wireless-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warning wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921 wifi: mt76: fix receiving LLC packets on mt7615/mt7915 wifi: nl80211: Split memcpy() of struct nl80211_wowlan_tcp_data_token flexible array wifi: wext: use flex array destination for memcpy() wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packets wifi: mac80211: netdev compatible TX stop for iTXQ drivers wifi: mac80211: fix decap offload for stations on AP_VLAN interfaces wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change() wifi: mac80211: remove/avoid misleading prints wifi: mac80211: fix probe req HE capabilities access wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer ==================== Link: https://lore.kernel.org/r/20221011163123.A093CC433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-12prandom: remove unused functionsJason A. Donenfeld1-6/+5
With no callers left of prandom_u32() and prandom_bytes(), as well as get_random_int(), remove these deprecated wrappers, in favor of get_random_u32() and get_random_bytes(). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_bytes() when possibleJason A. Donenfeld8-13/+13
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_u32() when possibleJason A. Donenfeld24-32/+32
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld2-2/+2
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld9-13/+13
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld25-53/+41
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11Merge tag 'pci-v6.1-changes' of ↵Linus Torvalds29-614/+1053
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. - Revert to a BAR assignment inherited from firmware only when the address is actually reachable via any upstream bridges, which fixes some cases where firmware doesn't configure all devices. - Add a sysfs interface to resize BARs so this can be done before assigning devices to a VM through VFIO. Power management: - Disable Precision Time Management for all devices on suspend to enable lower-power PM state. We previously did this just for Root Ports, which isn't enough because downstream devices can still generate PTM messages, which cause errors if it's disabled in the Root Port. - Save and restore the ASPM L1 PM Substates configuration for suspend/ resume. Previously this configuration was lost, so L1.x states likely stopped working after resume. - Check whether the L1 PM Substates Capability exists. If it didn't exist, we previously read junk and tried to configure L1 Substates based on that. - Fix the LTR_L1.2_THRESHOLD computation, which previously set a threshold for entering L1.2 that was too low in some cases. - Reduce the delay after transitions to or from D3cold by using usleep_range() rather than msleep(), which often slept for ~19ms instead of the 10ms normally required. The spec says 10ms is enough, but it's possible we could trip over devices that need a little more. Error handling: - Work around a BIOS bug that caused Intel Root Ports to advertise a Root Port Programmed I/O (RP PIO) log size of zero, which caused annoying warnings and prevented the kernel from dumping log registers for DPC errors. Qualcomm PCIe controller driver: - Add support for SC8280XP and SA8540P host controllers and SM8450 endpoint controller. - Disable Master AXI clock on endpoint controllers to save power when link is idle or in L1.x. - Expose link state transition counts via debugfs to help debug issues with low-power states. - Add auto-loading module support. Synopsys DesignWare PCIe controller driver: - Remove a dependency on ZONE_DMA32 by allocating the MSI target page differently. There's more work to do related to eDMA controllers, so it's not completely settled" * tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits) PCI: qcom-ep: Check platform_get_resource_byname() return value PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Define clocks per platform PCI: qcom-ep: Make PERST separation optional dt-bindings: PCI: qcom-ep: Make PERST separation optional PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic PCI: Expose PCIe Resizable BAR support via sysfs PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation PCI/ASPM: Ignore L1 PM Substates if device lacks capability PCI/ASPM: Factor out L1 PM Substates configuration PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS PCI: qcom-ep: Expose link transition counts via debugfs PCI: qcom-ep: Disable IRQs during driver remove PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI/ASPM: Refactor L1 PM Substates Control Register programming PCI: qcom-ep: Make use of the cached dev pointer PCI: qcom-ep: Rely on the clocks supplied by devicetree PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() ...
2022-10-11Merge tag 'i2c-for-6.1-rc1-batch2' of ↵Linus Torvalds5-4/+28
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - correct a variable type in the new pci1xxxx driver - add a new SoC to the qcom-cci driver - fix an issue with the designware driver which now got enough testing - the aspeed driver now handles busy target backends better * tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Assert NAK when slave is busy i2c: designware: Fix handling of real but unexpected device interrupts i2c: qcom-cci: Add MSM8226 compatible dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974 dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable
2022-10-11Merge tag 'pinctrl-v6.1-1' of ↵Linus Torvalds49-764/+7006
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
2022-10-11Merge tag 'input-for-v6.1-rc0' of ↵Linus Torvalds115-1575/+2104
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for IBM Operational Panel - a new driver for PinePhone keyboards - RT5120 PMIC power key support - various enhancements and support for new models in xpad (Xbox) driver - a new compatible ID for Elan touchscreen driver - rework of adp5588-keys driver to support configuring via device properties (OF, ACPI, etc) instead of platform data, and proper support of optional gpiochip functionality (and removal of gpio-adp5588 driver) - improvements to firmware update handling in Synaptics RMI4 driver - support for double key matrix in mt6779-keypad - support for polled mode in adc-joystick driver - other assorted driver fixes, cleanups and improvements * tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits) Input: i8042 - fix refount leak on sparc Input: i8042 - add LoongArch support in i8042-acpipnpio.h Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h Input: pinephone-keyboard - support the proxied I2C bus Input: pinephone-keyboard - add PinePhone keyboard driver dt-bindings: input: Add the PinePhone keyboard binding dt-bindings: input: Convert hid-over-i2c to DT schema input: drop empty comment blocks Input: xpad - add X-Box Adaptive Profile button Input: add ABS_PROFILE to uapi and documentation Input: xpad - add X-Box Adaptive XBox button Input: xpad - add X-Box Adaptive support Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER" Input: ibm-panel - add missing MODULE_DEVICE_TABLE Input: icn8505 - utilize acpi_get_subsystem_id() Input: xpad - decipher xpadone packages with GIP defines Input: xpad - refactor using BIT() macro Input: synaptics-rmi4 - convert to use sysfs_emit() APIs Input: twl4030-pwrbutton - add missing of.h include Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper ...
2022-10-11Merge tag 'fbdev-for-6.1-rc1' of ↵Linus Torvalds16-71/+41
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "Here's a fix for the smscufx USB graphics card to prevent a kernel crash if it's plugged in/out too fast. The other patches are mostly small cleanups, fixes in failure paths and code removal: - fix an use-after-free in smscufx USB graphics driver - add missing pci_disable_device() in tridentfb failure paths - correctly handle irq detection failure in mb862xx driver - fix resume code in omapfb/dss - drop unused code in controlfb, tridentfb, arkfb, imxfb and udlfb - convert uvesafb to use scnprintf() instead of snprintf() - convert gbefb to use dev_groups - add MODULE_DEVICE_TABLE() entry to vga16fb" * tag 'fbdev-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: mb862xx: Fix check of return value from irq_of_parse_and_map() fbdev: vga16fb: Add missing MODULE_DEVICE_TABLE() entry fbdev: tridentfb: Fix missing pci_disable_device() in probe and remove fbdev: smscufx: Fix use-after-free in ufx_ops_open() fbdev: gbefb: Convert to use dev_groups fbdev: imxfb: Remove redundant dev_err() call fbdev: omapfb/dss: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() fbdev: uvesafb: Convert snprintf to scnprintf fbdev: arkfb: Remove the unused function dac_read_reg() fbdev: tridentfb: Remove the unused function shadowmode_off() fbdev: controlfb: Remove the unused function VAR_MATCH() fbdev: udlfb: Remove redundant initialization to variable identical
2022-10-11Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi updates from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Fortify entry point length checks
2022-10-11Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds7-33/+38
Pull IPMI updates from Corey Minyard: "Fix a bunch of little problems in IPMI This is mostly just doc, config, and little tweaks. Nothing big, which is why there was nothing for 6.0. There is one crash fix, but it's not something that I think anyone is using yet" * tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi: ipmi: Remove unused struct watcher_entry ipmi: kcs: aspeed: Update port address comments ipmi: Add __init/__exit annotations to module init/exit funcs ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure ipmi:ipmb: Fix a vague comment and a typo dt-binding: ipmi: add fallback to npcm845 compatible ipmi: Fix comment typo char: ipmi: modify NPCM KCS configuration dt-bindings: ipmi: Add npcm845 compatible
2022-10-11drm/i915/display: consider DG2_RC_CCS_CC when migrating buffersMatthew Auld1-1/+12
For these types of display buffers, we need to able to CPU access some part of the backing memory in prepare_plane_clear_colors(). As a result we need to ensure we always place in the mappable part of lmem, which becomes necessary on small-bar systems. v2(Nirmoy & Ville): - Add some commentary for why we need to CPU access the buffer. - Split out the other changes, so we just consider the display change here. v3: - Handle this in the dpt path. v4(Ville): - Drop the intel_fb_rc_ccs_cc_plane() sanity check in pin_and_fence_fb_obj(), since we can also trigger this on DG1 it seems. Fixes: eb1c535f0d69 ("drm/i915: turn on small BAR support") Reported-by: Jianshui Yu <jianshui.yu@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-4-matthew.auld@intel.com (cherry picked from commit e3afc690188be8e4385d13d1b0e7f0ba01caea40) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-11drm/i915: allow control over the flags when migratingMatthew Auld4-4/+45
In the next patch we want to move the object (if the current resource is not compatible), to the mappable part of lmem for some display buffers. Currently that requires being able to unset the I915_BO_ALLOC_GPU_ONLY hint. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Jianshui Yu <jianshui.yu@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-3-matthew.auld@intel.com (cherry picked from commit 999f4562077208b683f0519e5f1aa1e5c2fd2191) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-11drm/amd/display: Simplify bool conversionYang Li1-1/+1
The result of 'pwr_status == 0' is Boolean, and the question mark expression is redundant. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2354 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-11drm/amd/display: fix transfer function passed to build_coefficients()Alex Deucher1-1/+1
The default argument should be enum TRANSFER_FUNCTION_SRGB rather than the current boolean value which improperly maps to TRANSFER_FUNCTION_BT709. Commit 9b3d76527f6e ("drm/amd/display: Revert adding degamma coefficients") looks to have improperly reverted commit d02097095916 ("drm/amd/display: Add regamma/degamma coefficients and set sRGB when TF is BT709") replacing the enum value with a boolean value. Cc: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Cc: Jaehyun Chung <jaehyun.chung@amd.com> Cc: Zeng Heng <zengheng4@huawei.com> Fixes: 9b3d76527f6e ("drm/amd/display: Revert adding degamma coefficients") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 19:41:14 +0300