Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This reworks the netfslib writeback implementation so that pages read
from the cache are written to the cache through ->writepages(),
thereby allowing the fscache page flag to be retired.
The reworking also:
- builds on top of the new writeback_iter() infrastructure
- makes it possible to use vectored write RPCs as discontiguous
streams of pages can be accommodated
- makes it easier to do simultaneous content crypto and stream
division
- provides support for retrying writes and re-dividing a stream
- replaces the ->launder_folio() op, so that ->writepages() is used
instead
- uses mempools to allocate the netfs_io_request and
netfs_io_subrequest structs to avoid allocation failure in the
writeback path
Some code that uses the fscache page flag is retained for
compatibility purposes with nfs and ceph. The code is switched to
using the synonymous private_2 label instead and marked with
deprecation comments.
The merge commit contains additional details on the new algorithm that
I've left out of here as it would probably be excessively detailed.
On top of the netfslib infrastructure this contains the work to
convert cifs over to netfslib"
* tag 'vfs-6.10.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
cifs: Enable large folio support
cifs: Remove some code that's no longer used, part 3
cifs: Remove some code that's no longer used, part 2
cifs: Remove some code that's no longer used, part 1
cifs: Cut over to using netfslib
cifs: Implement netfslib hooks
cifs: Make add_credits_and_wake_if() clear deducted credits
cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs
cifs: Set zero_point in the copy_file_range() and remap_file_range()
cifs: Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c
cifs: Replace the writedata replay bool with a netfs sreq flag
cifs: Make wait_mtu_credits take size_t args
cifs: Use more fields from netfs_io_subrequest
cifs: Replace cifs_writedata with a wrapper around netfs_io_subrequest
cifs: Replace cifs_readdata with a wrapper around netfs_io_subrequest
cifs: Use alternative invalidation to using launder_folio
netfs, afs: Use writeback retry to deal with alternate keys
netfs: Miscellaneous tidy ups
netfs: Remove the old writeback code
netfs: Cut over to using new writeback code
...
|
|
Fix the fileserver rotation code in a couple of ways:
(1) op->server_states is an array, not a pointer to a single record, so
fix the places that access it to index it.
(2) In the places that go through an address list to work out which one
has the best priority, fix the loops to skip known failed addresses.
Without this, the rotation algorithm may get stuck on addresses that are
inaccessible or don't respond.
This can be triggered manually by finding a server that advertises a
non-routable address and giving it a higher priority, eg.:
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
if the server, say, includes the address 192.168.7.7 in its address list,
and then attempting to access a volume on that server.
Fixes: 495f2ae9e355 ("afs: Fix fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/4005300.1712309731@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/998836.1714746152@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use a hook in the new writeback code's retry algorithm to rotate the keys
once all the outstanding subreqs have failed rather than doing it
separately on each subreq.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Remove the old writeback code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Cut over to using the new writeback code. The old code is #ifdef'd out or
otherwise removed from compilation to avoid conflicts and will be removed
in a future patch.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Implement the helpers for the new write code in afs. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Sometimes generic/011 causes kafs to follow up an FS.RemoveDir RPC call by
spending around a second sending a slew of FS.FetchStatus RPC calls to the
directory just deleted that then abort with VNOVNODE, indicating deletion
of the target directory.
This seems to stem from userspace attempting to stat the directory or
something in it:
afs_select_fileserver+0x46d/0xaa2
afs_wait_for_operation+0x12/0x17e
afs_fetch_status+0x56/0x75
afs_validate+0xfb/0x240
afs_permission+0xef/0x1b0
inode_permission+0x90/0x139
link_path_walk.part.0.constprop.0+0x6f/0x2f0
path_lookupat+0x4c/0xfa
filename_lookup+0x63/0xd7
vfs_statx+0x62/0x13f
vfs_fstatat+0x72/0x8a
The issue appears to be that afs_dir_remove_subdir() marks the callback
promise as being cancelled by setting the expiry time to AFS_NO_CB_PROMISE
- which then confuses afs_validate() which sends the FetchStatus to try and
get a new one before it checks for the AFS_VNODE_DELETED flag which
indicates that we know the directory got deleted.
Fix this by:
(1) Make afs_check_validity() return true if AFS_VNODE_DELETED is set, and
then tweak the return from afs_validate() if the DELETED flag is set.
(2) Move the AFS_VNODE_DELETED check in afs_validate() up above the
expiration check to immediately after we've grabbed the validate_lock.
Fixes: 453924de6212 ("afs: Overhaul invalidation handling to better support RO volumes")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240313081505.3060173-3-dhowells@redhat.com
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the AFS fileserver rotation algorithm, don't cache the preferred address
for the server as that will override the explicit preference if a
non-preferred address responds first.
Fixes: 495f2ae9e355 ("afs: Fix fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240313081505.3060173-2-dhowells@redhat.com
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This reverts commit 57e9d49c54528c49b8bffe6d99d782ea051ea534.
This undoes the hiding of .__afsXXXX silly-rename files. The problem with
hiding them is that rm can't then manually delete them.
This also reverts commit 5f7a07646655fb4108da527565dcdc80124b14c4 ("afs: Fix
endless loop in directory parsing") as that's a bugfix for the above.
Fixes: 57e9d49c5452 ("afs: Hide silly-rename files from userspace")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008102.html
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3085695.1710328121@warthog.procyon.org.uk
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
|
|
If a directory has a block with only ".__afsXXXX" files in it (from
uncompleted silly-rename), these .__afsXXXX files are skipped but without
advancing the file position in the dir_context. This leads to
afs_dir_iterate() repeating the block again and again.
Fix this by making the code that skips the .__afsXXXX file also manually
advance the file position.
The symptoms are a soft lookup:
watchdog: BUG: soft lockup - CPU#3 stuck for 52s! [check:5737]
...
RIP: 0010:afs_dir_iterate_block+0x39/0x1fd
...
? watchdog_timer_fn+0x1a6/0x213
...
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? afs_dir_iterate_block+0x39/0x1fd
afs_dir_iterate+0x10a/0x148
afs_readdir+0x30/0x4a
iterate_dir+0x93/0xd3
__do_sys_getdents64+0x6b/0xd4
This is almost certainly the actual fix for:
https://bugzilla.kernel.org/show_bug.cgi?id=218496
Fixes: 57e9d49c5452 ("afs: Hide silly-rename files from userspace")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/786185.1708694102@warthog.procyon.org.uk
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull RCU pathwalk fixes from Al Viro:
"We still have some races in filesystem methods when exposed to RCU
pathwalk. This series is a result of code audit (the second round of
it) and it should deal with most of that stuff.
Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
Up to maintainers (a note for NTFS folks - when documentation says
that a method may not block, it *does* imply that blocking allocations
are to be avoided. Really)"
[ More explanations for people who aren't familiar with the vagaries of
RCU path walking: most of it is hidden from filesystems, but if a
filesystem actively participates in the low-level path walking it
needs to make sure the fields involved in that walk are RCU-safe.
That "actively participate in low-level path walking" includes things
like having its own ->d_hash()/->d_compare() routines, or by having
its own directory permission function that doesn't just use the common
helpers. Having a ->d_revalidate() function will also have this issue.
Note that instead of making everything RCU safe you can also choose to
abort the RCU pathwalk if your operation cannot be done safely under
RCU, but that obviously comes with a performance penalty. One common
pattern is to allow the simple cases under RCU, and abort only if you
need to do something more complicated.
So not everything needs to be RCU-safe, and things like the inode etc
that the VFS itself maintains obviously already are. But these fixes
tend to be about properly RCU-delaying things like ->s_fs_info that
are maintained by the filesystem and that got potentially released too
early. - Linus ]
* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4_get_link(): fix breakage in RCU mode
cifs_get_link(): bail out in unsafe case
fuse: fix UAF in rcu pathwalks
procfs: make freeing proc_fs_info rcu-delayed
procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
nfs: fix UAF on pathwalk running into umount
nfs: make nfs_set_verifier() safe for use in RCU pathwalk
afs: fix __afs_break_callback() / afs_drop_open_mmap() race
hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
affs: free affs_sb_info with kfree_rcu()
rcu pathwalk: prevent bogus hard errors from may_lookup()
fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
|
|
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The max length of volume->vid value is 20 characters.
So increase idbuf[] size up to 24 to avoid overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240211150442.3416-1-d.dulov@aladdin.ru/ # v1
Link: https://lore.kernel.org/r/20240212083347.10742-1-d.dulov@aladdin.ru/ # v2
Link: https://lore.kernel.org/r/20240219143906.138346-3-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When searching for a matching peer, all addresses need to be searched,
not just the ipv6 ones in the fs_addresses6 list.
Given that the lists no longer contain addresses, there is little
reason to splitting things between separate lists, so unify them
into a single list.
When processing an incoming callback from an ipv4 address, this would
lead to a failure to set call->server, resulting in the callback being
ignored and the client seeing stale contents.
Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008035.html
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008037.html # v1
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008066.html # v2
Link: https://lore.kernel.org/r/20240219143906.138346-2-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most of the existing APIs have remained the same, but subsystems that
access file_lock fields directly need to reach into struct
file_lock_core now.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-35-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In a future patch, we're going to split file leases into their own
structure. Since a lot of the underlying machinery uses the same fields
move those into a new file_lock_core, and embed that inside struct
file_lock.
For now, add some macros to ensure that we can continue to build while
the conversion is in progress.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-17-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to using the new file locking helper functions. Also, in later
patches we're going to introduce macros that conflict with the variable
name in afs_next_locker. Rename it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-6-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In afs_proc_addr_prefs_show(), we need to unlock the RCU read lock in both
places before returning (and not lock it again).
Fixes: f94f70d39cc2 ("afs: Provide a way to configure address priorities")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401172243.cd53d5f6-oliver.sang@intel.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
Remove afs_dynroot_d_revalidate() as it is redundant as all it does is
return 1 and the caller assumes that if the op is not given.
Suggested-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
When afs does a lookup, it tries to use FS.InlineBulkStatus to preemptively
look up a bunch of files in the parent directory and cache this locally, on
the basis that we might want to look at them too (for example if someone
does an ls on a directory, they may want want to then stat every file
listed).
FS.InlineBulkStatus can be considered a compound op with the normal abort
code applying to the compound as a whole. Each status fetch within the
compound is then given its own individual abort code - but assuming no
error that prevents the bulk fetch from returning the compound result will
be 0, even if all the constituent status fetches failed.
At the conclusion of afs_do_lookup(), we should use the abort code from the
appropriate status to determine the error to return, if any - but instead
it is assumed that we were successful if the op as a whole succeeded and we
return an incompletely initialised inode, resulting in ENOENT, no matter
the actual reason. In the particular instance reported, a vnode with no
permission granted to be accessed is being given a UAEACCES abort code
which should be reported as EACCES, but is instead being reported as
ENOENT.
Fix this by abandoning the inode (which will be cleaned up with the op) if
file[1] has an abort code indicated and turn that abort code into an error
instead.
Whilst we're at it, add a tracepoint so that the abort codes of the
individual subrequests of FS.InlineBulkStatus can be logged. At the moment
only the container abort code can be 0.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
There appears to be a race between silly-rename files being created/removed
and various userspace tools iterating over the contents of a directory,
leading to such errors as:
find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it
when building a kernel.
Fix afs_readdir() so that it doesn't return .__afsXXXX silly-rename files
to userspace. This doesn't stop them being looked up directly by name as
we need to be able to look them up from within the kernel as part of the
silly-rename algorithm.
Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.
Change this automagically with:
perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/afs/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/afs/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/afs/*.c
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"Change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc)"
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
dcache: remove unnecessary NULL check in dget_dlock()
kill DCACHE_MAY_FREE
__d_unalias() doesn't use inode argument
d_alloc_parallel(): in-lookup hash insertion doesn't need an RCU variant
get rid of DCACHE_GENOCIDE
d_genocide(): move the extern into fs/internal.h
simple_fill_super(): don't bother with d_genocide() on failure
nsfs: use d_make_root()
d_alloc_pseudo(): move setting ->d_op there from the (sole) caller
kill d_instantate_anon(), fold __d_instantiate_anon() into remaining caller
retain_dentry(): introduce a trimmed-down lockless variant
__dentry_kill(): new locking scheme
d_prune_aliases(): use a shrink list
switch select_collect{,2}() to use of to_shrink_list()
to_shrink_list(): call only if refcount is 0
fold dentry_kill() into dput()
don't try to cut corners in shrink_lock_dentry()
fold the call of retain_dentry() into fast_dput()
Call retain_dentry() with refcount 0
dentry_kill(): don't bother with retain_dentry() on slow path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce the param_unknown_fn type and other clean ups (Andy
Shevchenko)
- Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
Silva, Kees Cook)
- Add KFENCE test to LKDTM (Stephen Boyd)
- Various strncpy() refactorings (Justin Stitt)
- Fix qnx4 to avoid writing into the smaller of two overlapping buffers
- Various strlcpy() refactorings
* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
qnx4: Use get_directory_fname() in qnx4_match()
qnx4: Extract dir entry filename processing into helper
atags_proc: Add __counted_by for struct buffer and use struct_size()
tracing/uprobe: Replace strlcpy() with strscpy()
params: Fix multi-line comment style
params: Sort headers
params: Use size_add() for kmalloc()
params: Do not go over the limit when getting the string length
params: Introduce the param_unknown_fn type
lkdtm: Add kfence read after free crash type
nvme-fc: replace deprecated strncpy with strscpy
nvdimm/btt: replace deprecated strncpy with strscpy
nvme-fabrics: replace deprecated strncpy with strscpy
drm/modes: replace deprecated strncpy with strscpy_pad
afs: Add __counted_by for struct afs_acl and use struct_size()
VMCI: Annotate struct vmci_handle_arr with __counted_by
i40e: Annotate struct i40e_qvlist_info with __counted_by
HID: uhid: replace deprecated strncpy with strscpy
samples: Replace strlcpy() with strscpy()
SUNRPC: Replace strlcpy() with strscpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"The majority of the patches are aimed at fixing and improving the AFS
filesystem's rotation over server IP addresses, but there are also
some fixes from Oleg Nesterov for the use of read_seqbegin_or_lock().
- Fix fileserver probe handling so that the next round of probes
doesn't break ongoing server/address rotation by clearing all the
probe result tracking. This could occasionally cause the rotation
algorithm to drop straight through, give a 'successful' result
without actually emitting any RPC calls, leaving the reply buffer
in an undefined state.
Instead, detach the probe results into a separate struct and
allocate a new one each time we start probing and update the
pointer to it. Probes are also sent in order of address preference
to try and improve the chance that the preferred one will complete
first.
- Fix server rotation so that it uses configurable address
preferences across on the probes that have completed so far than
ranking them by RTT as the latter doesn't necessarily give the best
route. The preference list can be altered by writing into
/proc/net/afs/addr_prefs.
- Fix the handling of Read-Only (and Backup) volume callbacks as
there is one per volume, not one per file, so if someone performs a
command that, say, offlines the volume but doesn't change it, when
it comes back online we don't spam the server with a status fetch
for every vnode we're using. Instead, check the Creation timestamp
in the VolSync record when prompted by a callback break.
- Handle volume regression (ie. a RW volume being restored from a
backup) by scrubbing all cache data for that volume. This is
detected from the VolSync creation timestamp.
- Adjust abort handling and abort -> error mapping to match better
with what other AFS clients do.
- Fix offline and busy volume state handling as they only apply to
individual server instances and not entire volumes and the rotation
algorithm should go and look at other servers if available. Also
make it sleep briefly before each retry if all the volume instances
are unavailable"
* tag 'afs-fix-rotation-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (40 commits)
afs: trace: Log afs_make_call(), including server address
afs: Fix offline and busy message emission
afs: Fix fileserver rotation
afs: Overhaul invalidation handling to better support RO volumes
afs: Parse the VolSync record in the reply of a number of RPC ops
afs: Don't leave DONTUSE/NEWREPSITE servers out of server list
afs: Fix comment in afs_do_lookup()
afs: Apply server breaks to mmap'd files in the call processor
afs: Move the vnode/volume validity checking code into its own file
afs: Defer volume record destruction to a workqueue
afs: Make it possible to find the volumes that are using a server
afs: Combine the endpoint state bools into a bitmask
afs: Keep a record of the current fileserver endpoint state
afs: Dispatch vlserver probes in priority order
afs: Dispatch fileserver probes in priority order
afs: Mark address lists with configured priorities
afs: Provide a way to configure address priorities
afs: Remove the unimplemented afs_cmp_addr_list()
afs: Add some more info to /proc/net/afs/servers
rxrpc: Create a procfile to display outstanding client conn bundles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
Add a tracepoint to log calls to afs_make_call(), including the destination
server address.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
The current code assumes that offline and busy volume states apply to all
instances of a volume, not just the one on the server that returned
VOFFLINE or VBUSY and will emit a notice to dmesg suggesting that the
entire volume is unavailable.
Fix that by moving the flags recording this to the afs_server_entry struct
that is used to represent a particular instance of a volume on a specific
server. The notice is altered to include the server UUID also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Fix the fileserver rotation so that it doesn't use RTT as the basis for
deciding which server and address to use as this doesn't necessarily give a
good indication of the best path. Instead, use the configurable preference
list in conjunction with whatever probes have succeeded at the time of
looking.
To this end, make the following changes:
(1) Keep an array of "server states" to track what addresses we've tried
on each server and move the waitqueue entries there that we'll need
for probing.
(2) Each afs_server_state struct is made to pin the corresponding server's
endpoint state rather than the afs_operation struct carrying a pin on
the server we're currently looking at.
(3) Drop the server list preference; we now always rescan the server list.
(4) afs_wait_for_probes() now uses the server state list to guide it in
what it waits for (and to provide the waitqueue entries) and returns
an indication of whether we'd got a response, run out of responsive
addresses or the endpoint state had been superseded and we need to
restart the iteration.
(5) Call afs_get_address_preferences*() occasionally to refresh the
preference values.
(6) When picking a server, scan the addresses of the servers for which we
have as-yet untested communications, looking for the highest priority
one and use that instead of trying all the addresses for a particular
server in ascending-RTT order.
(7) When a Busy or Offline state is seen across all available servers, do
a short sleep.
(8) If we detect that we accessed a future RO volume version whilst it is
undergoing replication, reissue the op against the older version until
at least half of the servers are replicated.
(9) Whilst RO replication is ongoing, increase the frequency of Volume
Location server checks for that volume to every ten minutes instead of
hourly.
Also add a tracepoint to track progress through the rotation algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Overhaul the third party-induced invalidation handling, making use of the
previously added volume-level event counters (cb_scrub and cb_ro_snapshot)
that are now being parsed out of the VolSync record returned by the
fileserver in many of its replies.
This allows better handling of RO (and Backup) volumes. Since these are
snapshot of a RW volume that are updated atomically simultantanously across
all servers that host them, they only require a single callback promise for
the entire volume. The currently upstream code assumes that RO volumes
operate in the same manner as RW volumes, and that each file has its own
individual callback - which means that it does a status fetch for *every*
file in a RO volume, whether or not the volume got "released" (volume
callback breaks can occur for other reasons too, such as the volumeserver
taking ownership of a volume from a fileserver).
To this end, make the following changes:
(1) Change the meaning of the volume's cb_v_break counter so that it is
now a hint that we need to issue a status fetch to work out the state
of a volume. cb_v_break is incremented by volume break callbacks and
by server initialisation callbacks.
(2) Add a second counter, cb_v_check, to the afs_volume struct such that
if this differs from cb_v_break, we need to do a check. When the
check is complete, cb_v_check is advanced to what cb_v_break was at
the start of the status fetch.
(3) Move the list of mmap'd vnodes to the volume and trigger removal of
PTEs that map to files on a volume break rather than on a server
break.
(4) When a server reinitialisation callback comes in, use the
server-to-volume reverse mapping added in a preceding patch to iterate
over all the volumes using that server and clear the volume callback
promises for that server and the general volume promise as a whole to
trigger reanalysis.
(5) Replace the AFS_VNODE_CB_PROMISED flag with an AFS_NO_CB_PROMISE
(TIME64_MIN) value in the cb_expires_at field, reducing the number of
checks we need to make.
(6) Change afs_check_validity() to quickly see if various event counters
have been incremented or if the vnode or volume callback promise is
due to expire/has expired without making any changes to the state.
That is now left to afs_validate() as this may get more complicated in
future as we may have to examine server records too.
(7) Overhaul afs_validate() so that it does a single status fetch if we
need to check the state of either the vnode or the volume - and do so
under appropriate locking. The function does the following steps:
(A) If the vnode/volume is no longer seen as valid, then we take the
vnode validation lock and, if the volume promise has expired, the
volume check lock also. The latter prevents redundant checks being
made to find out if a new version of the volume got released.
(B) If a previous RPC call found that the volsync changed unexpectedly
or that a RO volume was updated, then we unmap all PTEs pointing to
the file to stop mmap being used for access.
(C) If the vnode is still seen to be of uncertain validity, then we
perform an FS.FetchStatus RPC op to jointly update the volume status
and the vnode status. This assessment is done as part of parsing the
reply:
If the RO volume creation timestamp advances, cb_ro_snapshot is
incremented; if either the creation or update timestamps changes in
an unexpected way, the cb_scrub counter is incremented
If the Data Version returned doesn't match the copy we have
locally, then we ask for the pagecache to be zapped. This takes
care of handling RO update.
(D) If cb_scrub differs between volume and vnode, the vnode's
pagecache is zapped and the vnode's cb_scrub is updated unless the
file is marked as having been deleted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
A number of fileserver RPC operations return a VolSync record as part of
their reply that gives some information about the state of the volume being
accessed, including:
(1) A volume Creation timestamp. For an RW volume, this is the time at
which the volume was created; if it changes, the RW volume was
presumably restored from a backup and all cached data should be
scrubbed as Data Version numbers could regress on the files in the
volume.
For an RO volume, this is the time it was last snapshotted from the RW
volume. It is expected to advance each time this happens; if it
regresses, cached data should be scrubbed.
(2) A volume Update timestamp (Auristor only). For an RW volume, this is
updated any time any change is made to a volume or its contents. If
it regresses, all cached data must be scrubbed.
For an RO volume, this is a copy of the RW volume's Update timestamp
at the point of snapshotting. It can be used as a version number when
checking to see if a callback on a RO volume was due to a snapshot.
If it regresses, all cached data must be scrubbed.
but this is currently not made use of by the in-kernel afs filesystem.
Make the afs filesystem use this by:
(1) Add an update time field to the afs_volsync struct and use a value of
TIME64_MIN in both that and the creation time to indicate that they
are unset.
(2) Add creation and update time fields to the afs_volume struct and use
this to track the two timestamps.
(3) Add a volsync_lock mutex to the afs_volume struct to control
modification access for when we detect a change in these values.
(3) Add a 'pre-op volsync' struct to the afs_operation struct to record
the state of the volume tracking before the op.
(4) Add a new counter, cb_scrub, to the afs_volume struct to count events
that require all data to be scrubbed. A copy is placed in the
afs_vnode struct (inode) and if they no longer match, a scrub takes
place.
(5) When the result of an operation is being parsed, parse the VolSync
data too, if it is provided. Note that the two timestamps are handled
separately, since they don't work in quite the same way.
- If the afs_volume tracking is unset, just set it and do nothing
else.
- If the result timestamps are the same as the ones in afs_volume, do
nothing.
- If the timestamps regress, increment cb_scrub if not already done
so.
- If the creation timestamp on a RW volume changes, increment cb_scrub
if not already done so.
- If the creation timestamp on a RO volume advances, update the server
list and see if the current server has been excluded, if so reissue
the op. Once over half of the replication sites have been updated,
increment cb_ro_snapshot to indicate updates may be required and
switch over to excluding unupdated replication sites.
- If the creation timestamp on a Backup volume advances, just
increment cb_ro_snapshot to trigger updates.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Don't leave servers that are marked VLSF_DONTUSE or VLSF_NEWREPSITE out of
the server list for a volume; rather, mark DONTUSE ones excluded and mark
either NEWREPSITE excluded if the number of updated servers is <50% of the
usable servers or mark !NEWREPSITE excluded otherwise.
Mark the server list as a whole with a 3-state flag to indicate whether we
think the RW volume is being replicated to the RO volume, and, if so,
whether we should switch to using updated replication sites
(VLSF_NEWREPSITE) or stick with the old for now.
This processing is pushed up from the VLDB RPC reply parser to the code
that generates the server list from that information.
Doing this allows the old list to be kept with just the exclusion flags
replaced and to keep the server records pinned and maintained.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Fix the comment in afs_do_lookup() that says that slot 0 is used for the
fid being looked up and slot 1 is used for the directory. It's actually
done the other way round.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Apply server breaks to mmap'd files that are being used from that server
from the call processor work function rather than punting it off to a
workqueue. The work item, afs_server_init_callback(), then bumps each
individual inode off to its own work item introducing a potentially lengthy
delay. This reduces that delay at the cost of extending the amount of time
we delay replying to the CB.InitCallBack3 notification RPC from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Move the code that does validity checking of vnodes and volumes with
respect to third-party changes into its own file.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Defer volume record destruction to a workqueue so that afs_put_volume()
isn't going to run the destruction process in the callback workqueue whilst
the server is holding up other clients whilst waiting for us to reply to a
CB.CallBack notification RPC.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make it possible to find the afs_volume structs that are using an
afs_server struct to aid in breaking volume callbacks.
The way this is done is that each afs_volume already has an array of
afs_server_entry records that point to the servers where that volume might
be found. An afs_volume backpointer and a list node is added to each entry
and each entry is then added to an RCU-traversable list on the afs_server
to which it points.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Combine the endpoint state bool-type members into a bitmask so that some of
them can be waited upon more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Keep a record of the current fileserver endpoint state, including the probe
state, and replace it when a new probe is started rather than just
squelching the old state and overwriting it. Clearance of the old state
can cause a race if there's another thread also currently trying to
communicate with that server.
It appears that this race might be the culprit for some occasions where
kafs complains about invalid data in the RPC reply because the rotation
algorithm fell all the way through without actually issuing an RPC call and
the error return got filled in from the probe state (which has a zero error
recorded). Whatever happens to be in the caller's reply buffer is then
taken as the response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a volume location server, dispatch them
in order of descending priority to try and get back highest priority one
first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a fileserver, dispatch them in order of
descending priority to try and get back highest priority one first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add a field to each address in an address list (afs_addr_list struct) that
records the current priority for that address according to the address
preference table. We don't want to do this every time we use an address
list, so the version number of the address preference table is recorded in
the address list too and we only re-mark the list when we see the version
change.
These numbers are then displayed through /proc/net/afs/servers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS servers may have multiple addresses, but the client can't easily judge
between them as to which one is best. For instance, an address that has a
larger RTT might actually have a better bandwidth because it goes through a
switch rather than being directly connected - but we can't work this out
dynamically unless we push through sufficient data that we can measure it.
To allow the administrator to configure this, add a list of preference
weightings for server addresses by IPv4/IPv6 address or subnet and allow
this to be viewed through a procfile and altered by writing text commands
to that same file. Preference rules can be added/updated by:
echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs
echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs
and removed by:
echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs
echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs
where the priority is a number between 0 and 65535.
The list is split between IPv4 and IPv6 addresses and each sublist is kept
in numerical order, with rules that would otherwise match but have
different subnet masking being ordered with the most specific submatch
first.
A subsequent patch will apply these rules.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Remove afs_cmp_addr_list() as it was never implemented.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
In /proc/net/afs/servers, show the cell name and the last error for each
address in the server's list.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make afs use the netfs write helpers.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Track the file position above which the server is not expected to have any
data (the "zero point") and preemptively assume that we can satisfy
requests by filling them with zeroes locally rather than attempting to
download them if they're over that line - even if we've written data back
to the server. Assume that any data that was written back above that
position is held in the local cache. Note that we have to split requests
that straddle the line.
Make use of this to optimise away some reads from the server. We need to
set the zero point in the following circumstances:
(1) When we see an extant remote inode and have no cache for it, we set
the zero_point to i_size.
(2) On local inode creation, we set zero_point to 0.
(3) On local truncation down, we reduce zero_point to the new i_size if
the new i_size is lower.
(4) On local truncation up, we don't change zero_point.
(5) On local modification, we don't change zero_point.
(6) On remote invalidation, we set zero_point to the new i_size.
(7) If stored data is discarded from the pagecache or culled from fscache,
we must set zero_point above that if the data also got written to the
server.
(8) If dirty data is written back to the server, but not fscache, we must
set zero_point above that.
(9) If a direct I/O write is made, set zero_point above that.
Assuming the above, any read from the server at or above the zero_point
position will return all zeroes.
The zero_point value can be stored in the cache, provided the above rules
are applied to it by any code that culls part of the local cache.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|