Age | Commit message (Collapse) | Author | Files | Lines |
|
Consolidate bch2_gc_check_topology() and btree_node_interior_verify(),
and replace them with an improved version,
bch2_btree_node_check_topology().
This checks that children of an interior node correctly span the full
range of the parent node with no overlaps.
Also, ensure that topology repairs at runtime are always a fatal error;
in particular, this adds a check in btree_iter_down() - if we don't find
a key while walking down the btree that's indicative of a topology error
and should be flagged as such, not a null ptr deref.
Some checks in btree_update_interior.c remaining BUG_ONS(), because we
already checked the node for topology errors when starting the update,
and the assertions indicate that we _just_ corrupted the btree node -
i.e. the problem can't be that existing on disk corruption, they
indicate an actual algorithmic bug.
In the future, we'll be annotating the fsck errors list with which
recovery pass corrects them; the open coded "run explicit recovery pass
or fatal error" in bch2_btree_node_check_topology() will in the future
be done for every fsck_err() call.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The old code doesn't consider the mem alloced from mempool when call
krealloc on trans->mem. Also in bch2_trans_put, using mempool_free to
free trans->mem by condition "trans->mem_bytes == BTREE_TRANS_MEM_MAX"
is inaccurate when trans->mem was allocated by krealloc function.
Instead, we use used_mempool stuff to record the situation, and realloc
or free the trans->mem in elegant way.
Also, after krealloc failed in __bch2_trans_kmalloc, the old data
should be copied to the new buffer when alloc from mempool_alloc.
Fixes: 31403dca5bb1 ("bcachefs: optimize __bch2_trans_get(), kill DEBUG_TRANSACTIONS")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
THis silences a mm/page_alloc.c warning about allocating more than a
page with GFP_NOFAIL - and there's no reason for this to not have a
vmalloc fallback anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When bch2_btree_iter_peek_slot() clones the iterator to search for the
next key, and then discovers that the key from the cloned iterator is
the key we want to return - we also want to save the
iter->key_cache_path as well, for the update path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This converts -EIOs related to btree node errors to private error codes,
which will help with some ongoing debugging by giving us better error
messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we now always have a btree_trans when using a btree_and_journal_iter;
prep work for adding prefetching to btree_and_journal_iter
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were failing to set path->uptodate when reaching the end of a btree
node iterator, causing the new prefetch code for backpointers gc to go
into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When a btree root is unreadable, we still might be able to get some data
back by replaying what's in the journal. Previously though, we got
confused when journal replay would attempt to replay a key for a level
that didn't exist.
This adds bch2_btree_increase_depth(), so that journal replay can handle
this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
reserve slot 0 for unknown (when we overflow), to avoid some branches
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
refactoring the BTREE_ITER_WITH_UPDATES code, prep for removing the flag
and making it always-on
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_btree_iter_peek_prev() now supports BTREE_ITER_WITH_UPDATES
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
refactoring the BTREE_ITER_WITH_UPDATES code, prep for removing the flag
and making it always-on
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
XXX: we're allocating memory with btree locks held - bad
We need to plumb through an error path so we can do
allocate_dropping_locks() - but we're merging this now because it fixes
a transaction path overflow caused by indirect extent fragmentation, and
the resize path is rare.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Start to plumb through dynamically growable btree_paths; this patch
replaces most BTREE_ITER_MAX references with trans->nr_paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
the reflink triggers are also bumping up against the maximum number of
paths in a transaction - and generating proportional numbers of updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Some tweaks to greatly reduce locking overhead for the list of btree
transactions, so that it can always be enabled: leave btree_trans
objects on the list when they're on the percpu single item freelist,
and only check for duplicates in the same process when
CONFIG_BCACHEFS_DEBUG is enabled
- don't zero out the full btree_trans() unless we allocated it from
the mempool
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Upcoming patches are going to be changing trans->paths to a
reallocatable buffer. We need to guard against use after free when it's
used by other threads; this introduces RCU protection to those paths and
changes them to check for trans->paths == NULL
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
path->idx is now a code smell: we should be using path_idx_t, since it's
stable across btree path reallocation.
This is also a bit faster, using the same loop counter vs. fetching
path->idx from each path we iterate over.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
reducing our usage of path->idx
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bpos_eq() is cheaper than bpos_cmp()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
the btree write buffer path now creates a journal entry directly
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In the future we'll be making trans->paths resizable and potentially
having _many_ more paths (for fsck); we need to start fixing algorithms
that walk each path in a transaction where possible.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Instead of using a darray, we now allocate journal entries for the
transaction commit path with our normal bump allocator - with an inlined
fastpath, and using btree_transaction_stats to remember how much to
initially allocate so as to avoid transaction restarts.
This is prep work for converting write buffer updates to use this
mechanism.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These were for extra info in tracepoints for debugging a specialized
issue - we do not want to bloat btree_path for this, at least in release
builds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This gives us more context information - e.g. which codepath is invoking
btree node reads.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|