| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new flag to be explicit about when we're running atomic triggers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
XXX: we're allocating memory with btree locks held - bad
We need to plumb through an error path so we can do
allocate_dropping_locks() - but we're merging this now because it fixes
a transaction path overflow caused by indirect extent fragmentation, and
the resize path is rare.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Start to plumb through dynamically growable btree_paths; this patch
replaces most BTREE_ITER_MAX references with trans->nr_paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
the reflink triggers are also bumping up against the maximum number of
paths in a transaction - and generating proportional numbers of updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Some tweaks to greatly reduce locking overhead for the list of btree
transactions, so that it can always be enabled: leave btree_trans
objects on the list when they're on the percpu single item freelist,
and only check for duplicates in the same process when
CONFIG_BCACHEFS_DEBUG is enabled
- don't zero out the full btree_trans() unless we allocated it from
the mempool
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Upcoming patches are going to be changing trans->paths to a
reallocatable buffer. We need to guard against use after free when it's
used by other threads; this introduces RCU protection to those paths and
changes them to check for trans->paths == NULL
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
the btree write buffer path now creates a journal entry directly
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Instead of using a darray, we now allocate journal entries for the
transaction commit path with our normal bump allocator - with an inlined
fastpath, and using btree_transaction_stats to remember how much to
initially allocate so as to avoid transaction restarts.
This is prep work for converting write buffer updates to use this
mechanism.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These were for extra info in tracepoints for debugging a specialized
issue - we do not want to bloat btree_path for this, at least in release
builds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For BTREE_ITER_WITH_JOURNAL, we memoize lookups in the journal keys, to
avoid the binary search overhead.
Previously we stashed the pos of the last key returned from the journal,
in order to force the lookup to be redone when rewinding.
Now bch2_journal_keys_peek_upto() handles rewinding itself when
necessary - so we can slim down btree_iter.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As discussed in the previous patch, BTREE_ITER_ALL_LEVELS appears to be
racy with concurrent interior node updates - and perhaps it is fixable,
but it's tricky and unnecessary.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
With the previous patch that reworks BTREE_INSERT_JOURNAL_REPLAY, we can
now switch the btree write buffer to use it for flushing.
This has the advantage that transaction commits don't need to take a
journal reservation at all.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Running with fewer max btree paths doesn't work anymore when replication
is enabled - as we've added e.g. the freespace and bucket gens btrees,
we naturally end up needing more btree paths.
This is an issue with lockdep, we end up taking more locks than lockdep
will track (the MAX_LOCKD_DEPTH constant). But bcachefs as merged does
not yet support lockdep anyways, so we can leave that for later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This deletes the complicated and somewhat expensive journal
pre-reservation machinery in favor of just using journal watermarks:
when the journal is more than half full, we run journal reclaim more
aggressively, and when the journal is more than 3/4s full we only allow
journal reclaim to get new journal reservations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As prep work for the next patch to fix a key cache reclaim issue, we
need to start tracking whether we're currently holding write locks - so
that we can release and retake the before calling into memory reclaim.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More consistent organization.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull more bcachefs updates from Kent Overstreet:
"Here's the second big bcachefs pull request. This brings your tree up
to date with my master branch, which is what existing bcachefs users
are currently running.
New features:
- rebalance_work btree (and metadata version 1.3): the rebalance
thread no longer has to scan to find extents that need processing -
big scalability improvement.
- sb_errors superblock section: this adds counters for each fsck
error type, since filesystem creation, along with the date of the
most recent error. It'll get us better bug reports (since users do
not typically report errors that fsck was able to fix), and I might
add telemetry for this in the future.
Fixes include:
- multiple snapshot deletion fixes
- members_v2 fixups
- deleted_inodes btree fixes
- copygc thread no longer spins when a device is full but has no
fragmented buckets (i.e. rebalance needs to move data around
instead)
- a fix for a memory reclaim issue with the btree key cache: we're
now careful not to hold the srcu read lock that blocks key cache
reclaim for too long
- an early allocator locking fix, from Brian
- endianness fixes, from Brian
- CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big
performance improvement on multithreaded workloads"
* tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs: (70 commits)
bcachefs: Improve stripe checksum error message
bcachefs: Simplify, fix bch2_backpointer_get_key()
bcachefs: kill thing_it_points_to arg to backpointer_not_found()
bcachefs: bch2_ec_read_extent() now takes btree_trans
bcachefs: bch2_stripe_to_text() now prints ptr gens
bcachefs: Don't iterate over journal entries just for btree roots
bcachefs: Break up bch2_journal_write()
bcachefs: Replace ERANGE with private error codes
bcachefs: bkey_copy() is no longer a macro
bcachefs: x-macro-ify inode flags enum
bcachefs: Convert bch2_fs_open() to darray
bcachefs: Move __bch2_members_v2_get_mut to sb-members.h
bcachefs: bch2_prt_datetime()
bcachefs: CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y
bcachefs: Add a comment for BTREE_INSERT_NOJOURNAL usage
bcachefs: rebalance_work btree is not a snapshots btree
bcachefs: Add missing printk newlines
bcachefs: Fix recovery when forced to use JSET_NO_FLUSH journal entry
bcachefs: .get_parent() should return an error pointer
bcachefs: Fix bch2_delete_dead_inodes()
...
|
|
BTREE_INSERT_NOJOURNAL is primarily used for a performance optimization
related to inode updates and fsync - document it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
rebalance_work entries may refer to entries in the extents btree, which
is a snapshots btree, or they may also refer to entries in the reflink
btree, which is not.
Hence rebalance_work keys may use the snapshot field but it's not
required to be nonzero - add a new btree flag to reflect this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The SRCU read lock that btree_trans takes exists to make it safe for
bch2_trans_relock() to deref pointers to btree nodes/key cache items we
don't have locked, but as a side effect it blocks reclaim from freeing
those items.
Thus, it's important to not hold it for too long: we need to
differentiate between bch2_trans_unlock() calls that will be only for a
short duration, and ones that will be for an unbounded duration.
This introduces bch2_trans_unlock_long(), to be used mainly by the data
move paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
We should only be downgrading locks on success - otherwise, our
transaction restarts won't be getting the correct locks and we'll
livelock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More forwards compatibility fixups: having BKEY_TYPE_btree at the end of
the enum conflicts with unnkown btree IDs, this shifts BKEY_TYPE_btree
to slot 0 and fixes things up accordingly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're using more stack than we'd like in a number of functions, and
btree_trans is the biggest object that we stack allocate.
But we have to do a heap allocatation to initialize it anyways, so
there's no real downside to heap allocating the entire thing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This refactoring centralizes defining per-btree properties.
bch2_key_types_allowed was also about to overflow a u32, so expand that
to a u64.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Introduce support for prejournaled key updates. This allows a
transaction to commit an update for a key that already exists (and
is pinned) in the journal. This is required for btree write buffer
updates as the current scheme of journaling both on write buffer
insertion and write buffer (slow path) flush is unsafe in certain
crash recovery scenarios.
Create a small trans update wrapper to pass along the seq where the
key resides into the btree_insert_entry. From there, trans commit
passes the seq into the btree insert path where it is used to manage
the journal pin for the associated btree leaf.
Note that this patch only introduces the underlying mechanism and
otherwise includes no functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- endianness fixes
- mark some things static
- fix a few __percpu annotations
- fix silent enum conversions
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Change btree_update_flags to start after the last btree iterator flag,
so that we can pass both in the same flags argument.
This is needed for the upcoming bch2_bkey_get_mut() helper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rust bindgen doesn't handle macros, but it does handle integer
constants: this conversion aids in implementing safe Rust wrapper
interfaces.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These are two different things - this improves our debug assert
messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new method of doing btree updates - a straight write buffer,
implemented as a flat fixed size array.
This is only useful when we don't need to read from the btree in order
to do the update, and when reading is infrequent - perfect for the LRU
btree.
This will make LRU btree updates fast enough that we'll be able to use
it for persistently indexing buckets by fragmentation, which will be a
massive boost to copygc performance.
Changes:
- A new btree_insert_type enum, for btree_insert_entries. Specifies
btree, btree key cache, or btree write buffer.
- bch2_trans_update_buffered(): updates via the btree write buffer
don't need a btree path, so we need a new update path.
- Transaction commit path changes:
The update to the btree write buffer both mutates global, and can
fail if there isn't currently room. Therefore we do all write buffer
updates in the transaction all at once, and also if it fails we have
to revert filesystem usage counter changes.
If there isn't room we flush the write buffer in the transaction
commit error path and retry.
- A new persistent option, for specifying the number of entries in the
write buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recursive transaction commits are occasionally necessary - in
particular, for the upcoming btree write buffer's flush path.
This avoids bugs due to trans->flags being accidentally mutated
mid-commit, which can cause c->writes refcount leaks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we unlock in order to submit IO, the next relock event is likely to
fail if submit_bio() blocked - we shouldn't those events in our _fail
stats, since those are expected events and shouldn't cause test
failures.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This uses the new _ip() interface to six locks and hooks it up to
btree_path->ip_allocated, when available.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This should have been resetting trans->fs_usage_deltas as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In debug mode, we now track where btree iterators and paths are
initialized/allocated - helpful in tracking down btree path overflows.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch
- Adds a mechanism for queuing up journal entries prior to the journal
being started, which will be used for early journal log messages
- Adds bch2_fs_log_msg() and improves bch2_trans_log_msg(), which now
take format strings. bch2_fs_log_msg() can be used before or after
the journal has been started, and will use the appropriate mechanism.
- Deletes the now obsolete bch2_journal_log_msg()
- And adds more log messages to the recovery path - messages for
journal/filesystem started, journal entries being blacklisted, and
journal replay starting/finishing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
While a btree transaction is running, we hold a SRCU read lock on the
btree key cache that prevents btree key cache keys from being freed -
this is so that relock() operations won't access freed memory.
The downside of this is that long running btree transactions prevent
memory from being freed from the key cache. This adds a check in
bch2_trans_begin() - if the transaction has been running longer than 1
second, drop and retake the SRCU read lock and zero out pointers to
unlock key cache paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Expand some bitfields so we can keep adding more btrees.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
