| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previosuly, the transaction commit path would have to add keys to the
btree write buffer as a separate operation, requiring additional global
synchronization.
This patch introduces a new journal entry type, which indicates that the
keys need to be copied into the btree write buffer prior to being
written out. We switch the journal entry type back to
JSET_ENTRY_btree_keys prior to write, so this is not an on disk format
change.
Flushing the btree write buffer may require pulling keys out of journal
entries yet to be written, and quiescing outstanding journal
reservations; we previously added journal->buf_lock for synchronization
with the journal write path.
We also can't put strict bounds on the number of keys in the journal
destined for the write buffer, which means we might overflow the size of
the preallocated buffer and have to reallocate - this introduces a
potentially fatal memory allocation failure. This is something we'll
have to watch for, if it becomes an issue in practice we can do
additional mitigation.
The transaction commit path no longer has to explicitly check if the
write buffer is full and wait on flushing; this is another performance
optimization. Instead, when the btree write buffer is close to full we
change the journal watermark, so that only reservations for journal
reclaim are allowed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new lock for synchronizing between journal IO path and btree write
buffer flush.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This introduces a new helper for connecting time_stats to state changes,
i.e. when taking journal reservations is blocked for some reason.
We use this to track separately the different reasons the journal might
be blocked - i.e. space in the journal full, or the journal pin fifo
full.
Also do some cleanup and improvements on the time stats code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since outstanding journal buffers hold a journal pin, when flushing all
pins we need to close the current journal entry if necessary so its pin
can be released.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
journal_cur_seq() can legitimately be used outside of the journal lock,
where this assert can race
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This deletes the complicated and somewhat expensive journal
pre-reservation machinery in favor of just using journal watermarks:
when the journal is more than half full, we run journal reclaim more
aggressively, and when the journal is more than 3/4s full we only allow
journal reclaim to get new journal reservations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't mark device superblocks or allocate journal on a device that
isn't online.
That means we may need to do this on every mount, because we may have
formatted a new filesystem and then done the first mount
(bch2_fs_initialize()) in degraded mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Instead of using token pasting to generate methods for each superblock
section, just make the type a parameter to bch2_sb_field_get().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs freeze testing via fstests generic/390 occasionally
reproduces the following BUG from bch2_fs_read_only():
BUG_ON(atomic_long_read(&c->btree_key_cache.nr_dirty));
This indicates that one or more dirty key cache keys still exist
after the attempt to flush and quiesce the fs. The sequence that
leads to this problem actually occurs on unfreeze (ro->rw), and
looks something like the following:
- Task A begins a transaction commit and acquires journal_res for
the current seq. This transaction intends to perform key cache
insertion.
- Task B begins a bch2_journal_flush() via bch2_sync_fs(). This ends
up in journal_entry_want_write(), which closes the current journal
entry and drops the reference to the pin list created on entry open.
The pin put pops the front of the journal via fast reclaim since the
reference count has dropped to 0.
- Task A attempts to set the journal pin for the associated cached
key, but bch2_journal_pin_set() skips the pin insert because the
seq of the transaction reservation is behind the front of the pin
list fifo.
The end result is that the pin associated with the cached key is not
added, which prevents a subsequent reclaim from processing the key
and thus leaves it dangling at freeze time. The fundamental cause of
this problem is that the front of the journal is allowed to pop
before a transaction with outstanding reservation on the associated
journal seq is able to add a pin. The count for the pin list
associated with the seq drops to zero and is prematurely reclaimed
as a result.
The logical fix for this problem lies in how the journal buffer is
managed in similar scenarios where the entry might have been closed
before a transaction with outstanding reservations happens to be
committed.
When a journal entry is opened, the current sequence number is
bumped, the associated pin list is initialized with a reference
count of 1, and the journal buffer reference count is bumped (via
journal_state_inc()). When a journal reservation is acquired, the
reservation also acquires a reference on the associated buffer. If
the journal entry is closed in the meantime, it drops both the pin
and buffer references held by the open entry, but the buffer still
has references held by outstanding reservation. After the associated
transaction commits, the reservation release drops the associated
buffer references and the buffer is written out once the reference
count has dropped to zero.
The fundamental problem here is that the lifecycle of the pin list
reference held by an open journal entry is too short to cover the
processing of transactions with outstanding reservations. The
simplest way to address this is to expand the pin list reference to
the lifecycle of the buffer vs. the shorter lifecycle of the open
journal entry. This ensures the pin list for a seq with outstanding
reservation cannot be popped and reclaimed before all outstanding
reservations have been released, even if the associated journal
entry has been closed for further reservations.
Move the pin put from journal entry close to where final processing
of the journal buffer occurs. Create a duplicate helper to cover the
case where the caller doesn't already hold the journal lock. This
allows generic/390 to pass reliably.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs freeze testing has uncovered some raciness between journal
entry open/close and pin list reference count management. The
details of the problem are described in a separate patch. In
preparation for the associated fix, refactor the journal buffer put
path a bit to allow it to eventually handle dropping the pin list
reference currently held by an open journal entry.
Retain the journal write dispatch helper since the closure code is
inlined and we don't want to increase the amount of inline code in
the transaction commit path, but rename the function to reflect
the purpose of final processing of the journal buffer.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We have a couple journal pin put helpers to handle cases where the
journal lock is already held or not. Refactor the helpers to lock
and reclaim from the highest level and open code the reclaim from
the one caller of the internal variant. The latter call will be
moved into the journal buf release helper in a later patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're using more stack than we'd like in a number of functions, and
btree_trans is the biggest object that we stack allocate.
But we have to do a heap allocatation to initialize it anyways, so
there's no real downside to heap allocating the entire thing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that we have distinct error codes for different memory allocation
failures, the early init log messages are no longer needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This unifies JOURNAL_WATERMARK with BCH_WATERMARK; we're working towards
specifying watermarks once in the transaction commit path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is prep work for consolidating with JOURNAL_WATERMARK.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add two new helpers for printing error messages with __func__ and
bch2_err_str():
- bch_err_fn
- bch_err_msg
Also kill the old error strings in the recovery path, which were causing
us to incorrectly report memory allocation failures - they're not needed
anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs checks for journal stuck conditions both in the journal
space calculation code and the journal reservation slow path. The
logic in both places is rather tricky and can result in
non-deterministic failure characteristics and debug output.
In preparation to condense journal stuck handling to a single place,
refactor the __journal_res_get() logic into a standalone helper.
Since multiple callers into the reservation code can result in
duplicate reports, use the ->err_seq field as a serialization
mechanism for the debug dump. Finally, add some comments to help
explain the logic and hopefully facilitate further improvements in
the future.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs detects journal stuck conditions in a couple different
places. If the logic in the journal reservation slow path happens to
detect the problem, I've seen instances where the filesystem remains
deadlocked even though it has been shut down. This is occasionally
reproduced by generic/333, and usually manifests as one or more
tasks stuck in the journal reservation slow path.
To help avoid this problem, repeat the journal error check in
__journal_res_get() once under spinlock to cover the case where the
previous lock holder might have triggered shutdown. This also helps
avoid spurious/duplicate stuck reports. Also, wake the journal from
the halt code to make sure blocked callers of the journal res
slowpath have a chance to wake up and observe the pending error.
This survives an overnight looping run of generic/333 without the
aforementioned lockups.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds private error codes for most (but not all) of our ENOMEM uses,
which makes it easier to track down assorted allocation failures.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- __bch2_bkey_drop_ptr() -> bch2_bkey_drop_ptr_noerror(), now available
outside extents.
- Split bch2_bkey_has_device() and bch2_bkey_has_device_c(), const and
non const versions
- bch2_extent_has_ptr() now returns the pointer it found
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now, any open_bucket can go on the partial list: allocating from the
partial list has been moved to its own dedicated function,
open_bucket_add_bucets() -> bucket_alloc_set_partial().
In particular, this means that erasure coded buckets can safely go on
the partial list; the new location works with the "allocate an ec bucket
first, then the rest" logic.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Fix a sleeping-in-atomic bug due to calling
bch2_journal_buckets_to_sb() under the journal lock.
- Additionally, now we mark buckets as journal buckets before adding
them to the journal in memory and the superblock. This ensures that
if we crash part way through we'll never be writing to journal
buckets that aren't marked correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This refactors to not call bch2_journal_block() with c->sb_lock held.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More error code cleanup, for better error messages and debugability.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More error code improvements - this gets us more useful error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch
- Adds a mechanism for queuing up journal entries prior to the journal
being started, which will be used for early journal log messages
- Adds bch2_fs_log_msg() and improves bch2_trans_log_msg(), which now
take format strings. bch2_fs_log_msg() can be used before or after
the journal has been started, and will use the appropriate mechanism.
- Deletes the now obsolete bch2_journal_log_msg()
- And adds more log messages to the recovery path - messages for
journal/filesystem started, journal entries being blacklisted, and
journal replay starting/finishing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Continuing the saga of introducing private dedicated error codes for
each error path, this patch converts ENOSPC to error codes that are
subtypes of ENOSPC. We've recently had a test failure where we got
-ENOSPC where we shouldn't have, and didn't have enough information to
tell where it came from, so this patch will solve that problem.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new helper, bch2_trans_run(), that runs a function with a
btree_transaction context but without handling transaction restarts.
We're adding checks for nested transaction restart handling: when an
inner transaction handles a transaction restart it will still have to
return it to the outer transaction, or else assertions will be popped in
the outer transaction.
But some places don't need restart handling at the outer scope, so this
helper does what they need.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, the journal read path used a linked list for storing the
journal entries we read from disk. But there's been a bug that's been
causing journal_flush_delay to incorrectly be set to 0, leading to far
more journal entries than is normal being written out, which then means
filesystems are no longer able to start due to the O(n^2) behaviour of
inserting into/searching that linked list.
Fix this by switching to a radix tree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new superblock field which represents journal buckets as ranges:
also move code for the superblock journal fields to journal_sb.c.
This also reworks the code for resizing the journal to write the new
superblock before using the new journal buckets, and thus be a bit
safer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Since journal reclaim -> btree key cache flushing may require the
allocation of new btree nodes, it has an implicit dependency on copygc
in order to make forward progress - so we should avoid blocking copygc
unless the journal is really close to full.
This introduces watermarks to replace our single MAY_GET_UNRESERVED bit
in the journal, and adds a watermark for copygc and plumbs it through.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This makes an array of strings available, like our other enums.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This tweaks __bch2_set_nr_journal_buckets() so that we aren't reversing
their order in the jorunal anymore - nice for rotating disks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds bch2_journal_log_msg(), which just logs a message to the
journal, and uses it to mark startup and when journal replay finishes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Less system noise.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This fixes a shutdown race where we were rearming journal->write_work
after the journal has already shut down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
