| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add two new helpers for printing error messages with __func__ and
bch2_err_str():
- bch_err_fn
- bch_err_msg
Also kill the old error strings in the recovery path, which were causing
us to incorrectly report memory allocation failures - they're not needed
anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As with previous conversions, replace -ENOENT uses with more informative
private error codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These deletes a bch2_trans_unlock() call from __bch2_move_data(). It was
redundant; bch2_move_extent() has the correct unlock call, and it was
buggy because when move_extent calls bch2_extent_drop_ptrs() we don't
want the transaction to be unlocked yet - this fixes a btree_iter.c
assertion.
Fixes https://github.com/koverstreet/bcachefs/issues/511.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's safe to call bch2_trans_update with a k/v pair where the value
hasn't been filled out, as long as the key part has been and the value
is filled out by transaction commit time.
This patch folds the bch2_trans_update() call into bch2_bkey_make_mut(),
eliminating a bit of boilerplate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
With backpointers, it's now impossible for bch2_evacuate_bucket() to be
completely reliable: it can race with an extent being partially
overwritten or split, which needs a new write buffer flush for the
backpointer to be seen.
This shouldn't be a real issue in practice; the previous patch added a
new tracepoint so we'll be able to see more easily if it is.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move path tracepoints now include the key being moved. Also, add new
tracepoints for the start of move_extent, and evacuate_bucket.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't store backpointers in alloc keys anymore, since we gained the
btree write buffer.
This patch drops support for backpointers in alloc keys, and revs the on
disk format version so that we know a fsck is required.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a flags param to bch2_backpointer_get_key() so that we can
pass BTREE_ITER_INTENT, since ec_stripe_update_extent() is updating the
extent immediately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were going into an infinite loop when printing out backpointers, due
to never incrementing bp_offset - whoops.
Also limit the number of backpointers we print to 10; this is debug code
and we only need to print a sample, not all of them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This should help with excessive 'would deadlock' transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is a bit awkward: we're passing around a btree_trans, but we're not
in a context where transaction restarts are handled - we should try to
come up with a better way to denote situations like this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This implements a new shutdown path for erasure coding, which is needed
for the upcoming BCH_WRITE_WAIT_FOR_EC write path.
The process is:
- Cancel new stripes being built up
- Close out/cancel open buckets on write points or the partial list
that are for stripes
- Shutdown rebalance/copygc
- Then wait for in flight new stripes to finish
With BCH_WRITE_WAIT_FOR_EC, move ops will be waiting on stripes to fill
up before they complete; the new ec shutdown path is needed for shutting
down copygc/rebalance without deadlocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This also adds bch2_write_op_to_text(): now we can see outstand moves,
useful for debugging shutdown with the upcoming BCH_WRITE_WAIT_FOR_EC
and likely for other things in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The copygc code itself now calls this when all moves from a given bucket
are complete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This improves copygc pipelining across multiple buckets: we now track
each in flight bucket we're evacuating, with separate moving_contexts.
This means that whereas previously we had to wait for outstanding moves
to complete to ensure we didn't try to evacuate the same bucket twice,
we can now just check buckets we want to evacuate against the pending
list.
This also mean we can run the verify_bucket_evacuated() check without
killing pipelining - meaning it can now always be enabled, not just on
debug builds.
This is going to be important for the upcoming erasure coding work,
where moving IOs that are being erasure coded will now skip the initial
replication step; instead the IOs will wait on the stripe to complete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that we have much more efficient updates to the LRU btree, this
patch adds a new LRU that indexes buckets by fragmentation.
This means copygc no longer has to scan every bucket to find buckets
that need to be evacuated.
Changes:
- A new field in bch_alloc_v4, fragmentation_lru - this corresponds to
the bucket's position in the fragmentation LRU. We add a new field
for this instead of calculating it as needed because we may make the
fragmentation LRU optional; this field indicates whether a bucket is
on the fragmentation LRU.
Also, zoned devices will introduce variable bucket sizes; explicitly
recording the LRU position will be safer for them.
- A new copygc path for using the fragmentation LRU instead of
scanning every bucket and building up an in-memory heap.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes an incorrectly handled transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The recent nocow locking rework introduced a deadlock in the data move
path: the new nocow locking scheme uses a hash table with a fixed size
array for chaining, meaning on hash collision we may have to wait for
other locks to be released before we can lock a bucket.
And since the data move path needs to submit writes from the same thread
that's taking nocow locks and submitting reads, this introduces a
deadlock.
This shouldn't happen often in practice, but since the data move path
can keep large numbers of IOs in flight simultaneously, it's something
we have to handle.
This patch makes move_ctxt_wait_event() available to
bch2_data_update_init() and uses it when appropriate, which is our
normal solution to this kind of thing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds support for nocow mode, where we do writes in-place when
possible. Patch components:
- New boolean filesystem and inode option, nocow: note that when nocow
is enabled, data checksumming and compression are implicitly disabled
- To prevent in-place writes from racing with data moves
(data_update.c) or bucket reuse (i.e. a bucket being reused and
re-allocated while a nocow write is in flight, we have a new locking
mechanism.
Buckets can be locked for either data update or data move, using a
fixed size hash table of two_state_shared locks. We don't have any
chaining, meaning updates and moves to different buckets that hash to
the same lock will wait unnecessarily - we'll want to watch for this
becoming an issue.
- The allocator path also needs to check for in-place writes in flight
to a given bucket before giving it out: thus we add another counter
to bucket_alloc_state so we can track this.
- Fsync now may need to issue cache flushes to block devices instead of
flushing the journal. We add a device bitmask to bch_inode_info,
ei_devs_need_flush, which tracks devices that need to have flushes
issued - note that this will lead to unnecessary flushes when other
codepaths have already issued flushes, we may want to replace this with
a sequence number.
- New nocow write path: look up extents, and if they're writable write
to them - otherwise fall back to the normal COW write path.
XXX: switch to sequence numbers instead of bitmask for devs needing
journal flush
XXX: ei_quota_lock being a mutex means bch2_nocow_write_done() needs to
run in process context - see if we can improve this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The data update path requires special support for unwritten extents - we
still need to be able to move them, but there's no need to read or write
anything.
This patch adds a new error code to tell bch2_move_extent() that we're
short circuiting the read, and adds bch2_update_unwritten_extent() to
create a reservation then call __bch2_data_update_index_update().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The btree key cache mainly helps with lock contention, at the cost of
additional memory overhead. During some fsck passes the memory overhead
really matters, but fsck is single threaded so lock contention is an
issue - so skipping the key cache during fsck will help with
performance.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, copygc needed to walk the entire extents & reflink btrees to
find extents that needed to be moved.
Now that we have backpointers, this patch implements
bch2_evacuate_bucket() in the move code, which copygc now uses for
evacuating mostly empty buckets.
Also, thanks to the new backpointers code, copygc can now move btree
nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a debug mode where we split up the c->writes refcount into
distinct refcounts for every codepath that takes a reference, and adds
sysfs code to print the value of each ref.
This will make it easier to debug shutdown hangs due to refcount leaks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This improves io_opts() and makes it a non-inline function - it's big
enough that it probably shouldn't be.
Also, bch_io_opts no longer needs fields for whether options are
defined, so we can slim it down a bit.
We'd like to stop passing around the full bch_io_opts, but that'll be
tricky because of bch2_rebalance_add_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More error code improvements - this gets us more useful error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This introduces some new conveniences, to help cut down on boilerplate:
- bch2_trans_kmalloc_nomemzero() - performance optimiation
- bch2_bkey_make_mut()
- bch2_bkey_get_mut()
- bch2_bkey_get_mut_typed()
- bch2_bkey_alloc()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Marking a non-static function as inline doesn't actually work and is
now causing problems - drop that
- Introduce BCACHEFS_LOG_PREFIX for when we want to prefix log messages
with bcachefs (filesystem name)
- Userspace doesn't have real percpu variables (maybe we can get this
fixed someday), put an #ifdef around bch2_disk_reservation_add()
fastpath
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Cached pointers are generally dropped, not moved: this led to an
assertion firing in the data update path when there were no new replicas
being written.
This path adds a data_options field for pointers to be dropped, and
tweaks move_extent() to check if we're only dropping pointers, not
writing new ones, before kicking off a data update operation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that we have error codes, with subtypes, we can switch to our own
error code for transaction restarts - and even better, a distinct error
code for each transaction restart reason: clearer code and better
debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This isn't done very often, but it is legitimate
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
There's no point reading an extent in order to move it if the write is
going to fail because we're shutting down. This patch changes the move
path so that moving_io now owns a ref on c->writes - as a bonus,
rebalance and copygc will now notice that we're shutting down and exit
quicker.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
- add bch2_moving_ctxt_(init|exit)
- split out __bch2_evacutae_bucket() which takes an existing
moving_ctxt, this will be used for improving copygc performance by
pipelining across multiple buckets
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
move_ratelimit() now has a bool that specifies whether we want to
wait for copygc to finish.
When copygc is running, we're probably low on free buckets instead
of consuming the remaining buckets, we want to wait for copygc to
finish.
This should help with performance, and run away bucket fragmentation.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch significantly cleans up and simplifies the data_update
interface. Instead of only being able to specify a single pointer by
device to rewrite, we're now able to specify any or all of the pointers
in the original extent to be rewrited, as a bitmask.
data_cmd is no more: the various pred functions now just return true if
the extent should be moved/updated. All the data_update path does is
rewrite existing replicas, or add new ones.
This fixes a bug where with background compression on replicated
filesystems, where rebalance -> data_update would incorrectly drop the
wrong old replica, and keep trying to recompress an extent pointer and
each time failing to drop the right replica. Oops.
Now, the data update path doesn't look at the io options to decide which
pointers to keep and which to drop - it only goes off of the
data_update_options passed to it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This is the start of reorganizing the data IO paths. The plan is to also
break apart io.c into data_read.c and data_write.c, and migrate_write
will be renamed to the data_update path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new option, move_bytes_in_flight, for configuring the amount
of IO in flight by copygc/rebalance - users with many devices in their
filesystem will want to increase this.
In the future we should be smarter about this, but this is an easy
improvement.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds a new superblock field for persisting counters
and adds a sysfs interface in counters/ exposing these counters.
The superblock field is ignored by older versions letting us avoid
an on disk version bump.
Each sysfs file outputs a counter that tracks since filesystem
creation and a counter for the current mount session.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Delete some obsolete tracepoints, organize alloc tracepoints better,
make a few tracepoints more consistent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We're seeing occasional firings of the assertion in the key cache
shutdown code that nr_dirty == 0, which means we must sometimes be doing
transaction commits after we've gone read only.
Cleanups & changes:
- BCH_FS_ALLOC_CLEAN renamed to BCH_FS_CLEAN_SHUTDOWN
- new helper bch2_btree_interior_updates_flush(), which returns true if
it had to wait
- bch2_btree_flush_writes() now also returns true if there were btree
writes in flight
- __bch2_fs_read_only now checks if btree writes were in flight in the
shutdown loop: btree write completion does a transaction update, to
update the pointer in the parent node
- assert that !BCH_FS_CLEAN_SHUTDOWN in __bch2_trans_commit
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We don't actually want copygc allocations to be nowait - an allocation
for copygc might fail and then later succeed due to a bucket needing to
wait on journal commit, or to be discarded.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This makes an array of strings available, like our other enums.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Inspired by CCAN darray - simple, stupid resizable (dynamic) arrays.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
