summaryrefslogtreecommitdiff
path: root/fs/befs
AgeCommit message (Collapse)AuthorFilesLines
2023-08-30Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linuxLinus Torvalds1-0/+1
Pull block updates from Jens Axboe: "Pretty quiet round for this release. This contains: - Add support for zoned storage to ublk (Andreas, Ming) - Series improving performance for drivers that mark themselves as needing a blocking context for issue (Bart) - Cleanup the flush logic (Chengming) - sed opal keyring support (Greg) - Fixes and improvements to the integrity support (Jinyoung) - Add some exports for bcachefs that we can hopefully delete again in the future (Kent) - deadline throttling fix (Zhiguo) - Series allowing building the kernel without buffer_head support (Christoph) - Sanitize the bio page adding flow (Christoph) - Write back cache fixes (Christoph) - MD updates via Song: - Fix perf regression for raid0 large sequential writes (Jan) - Fix split bio iostat for raid0 (David) - Various raid1 fixes (Heinz, Xueshi) - raid6test build fixes (WANG) - Deprecate bitmap file support (Christoph) - Fix deadlock with md sync thread (Yu) - Refactor md io accounting (Yu) - Various non-urgent fixes (Li, Yu, Jack) - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li, Ming, Nitesh, Ruan, Tejun, Thomas, Xu)" * tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits) block: use strscpy() to instead of strncpy() block: sed-opal: keyring support for SED keys block: sed-opal: Implement IOC_OPAL_REVERT_LSP block: sed-opal: Implement IOC_OPAL_DISCOVERY blk-mq: prealloc tags when increase tagset nr_hw_queues blk-mq: delete redundant tagset map update when fallback blk-mq: fix tags leak when shrink nr_hw_queues ublk: zoned: support REQ_OP_ZONE_RESET_ALL md: raid0: account for split bio in iostat accounting md/raid0: Fix performance regression for large sequential writes md/raid0: Factor out helper for mapping and submitting a bio md raid1: allow writebehind to work on any leg device set WriteMostly md/raid1: hold the barrier until handle_read_error() finishes md/raid1: free the r1bio before waiting for blocked rdev md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io() blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init drivers/rnbd: restore sysfs interface to rnbd-client md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid() raid6: test: only check for Altivec if building on powerpc hosts raid6: test: make sure all intermediate and artifact files are .gitignored ...
2023-08-02fs: add CONFIG_BUFFER_HEADChristoph Hellwig1-0/+1
Add a new config option that controls building the buffer_head code, and select it from all file systems and stacking drivers that need it. For the block device nodes and alternative iomap based buffered I/O path is provided when buffer_head support is not enabled, and iomap needs a a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call into the buffer_head code when it doesn't exist. Otherwise this is just Kconfig and ifdef changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-13befs: convert to ctime accessor functionsJeff Layton1-1/+1
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230705190309.579783-25-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-31befs: Replace all non-returning strlcpy with strscpyAzeem Shaikh2-2/+2
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated. In an effort to remove strlcpy() completely, replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230509014136.2095900-1-azeemshaikh38@gmail.com
2022-08-02befs: Convert befs_symlink_read_folio() to use a folioMatthew Wilcox (Oracle)1-9/+7
This is a straightforward conversion from the page APIs to the folio APIs. Symlinks are not allowed to be larger than PAGE_SIZE, so there is little work to do here. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-09befs: Convert befs to read_folioMatthew Wilcox (Oracle)1-3/+4
This is a "weak" conversion which converts straight back to using pages. A full conversion should be performed at some point, hopefully by someone familiar with the filesystem. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-09fs: Convert block_read_full_page() to block_read_full_folio()Matthew Wilcox (Oracle)1-5/+5
This function is NOT converted to handle large folios, so include an assert that the filesystem isn't passing one in. Otherwise, use the folio functions instead of the page functions, where they exist. Convert all filesystems which use block_read_full_page(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-03-23fs: allocate inode by using alloc_inode_sb()Muchun Song1-1/+1
The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4] Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-19isystem: ship and use stdarg.hAlexey Dobriyan1-1/+1
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>. stdarg.h is the only userspace header commonly used in the kernel. GPL 2 version of <stdarg.h> can be extracted from http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-03-31fs/befs: Delete obsolete TODO fileWang Qing1-14/+0
The TODO file here has not been updated from 2005, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18[PATCH] reduce boilerplate in fsid handlingAl Viro1-2/+1
Get rid of boilerplate in most of ->statfs() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-24block: move struct block_device to blk_types.hChristoph Hellwig1-0/+1
Move the struct block_device definition together with most of the block layer definitions, as it has nothing to do with the rest of fs.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-30fs: Fill in max and min timestamps in superblockDeepa Dinamani1-0/+2
Fill in the appropriate limits to avoid inconsistencies in the vfs cached inode times when timestamps are outside the permitted range. Even though some filesystems are read-only, fill in the timestamps to reflect the on-disk representation. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-By: Tigran Aivazian <aivazian.tigran@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: aivazian.tigran@gmail.com Cc: al@alarsen.net Cc: coda@cs.cmu.edu Cc: darrick.wong@oracle.com Cc: dushistov@mail.ru Cc: dwmw2@infradead.org Cc: hch@infradead.org Cc: jack@suse.com Cc: jaharkes@cs.cmu.edu Cc: luisbg@kernel.org Cc: nico@fluxnic.net Cc: phillip@squashfs.org.uk Cc: richard@nod.at Cc: salah.triki@gmail.com Cc: shaggy@kernel.org Cc: linux-xfs@vger.kernel.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: reiserfs-devel@vger.kernel.org
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02befs: switch to ->free_inode()Al Viro1-9/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-06-16fix a series of Documentation/ broken file name referencesMauro Carvalho Chehab1-1/+1
As files move around, their previous links break. Fix the references for them. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-05-21befs_lookup(): use d_splice_alias()Al Viro1-12/+5
RTFS(Documentation/filesystems/nfs/Exporting) if you try to make something exportable. Fixes: ac632f5b6301 "befs: add NFS export support" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-15befs: Define usercopy region in befs_inode_cache slab cacheDavid Windsor1-5/+9
befs symlink pathnames, stored in struct befs_inode_info.i_data.symlink and therefore contained in the befs_inode_cache slab cache, need to be copied to/from userspace. cache object allocation: fs/befs/linuxvfs.c: befs_alloc_inode(...): ... bi = kmem_cache_alloc(befs_inode_cachep, GFP_KERNEL); ... return &bi->vfs_inode; befs_iget(...): ... strlcpy(befs_ino->i_data.symlink, raw_inode->data.symlink, BEFS_SYMLINK_LEN); ... inode->i_link = befs_ino->i_data.symlink; example usage trace: readlink_copy+0x43/0x70 vfs_readlink+0x62/0x110 SyS_readlinkat+0x100/0x130 fs/namei.c: readlink_copy(..., link): ... copy_to_user(..., link, len); (inlined in vfs_readlink) generic_readlink(dentry, ...): struct inode *inode = d_inode(dentry); const char *link = inode->i_link; ... readlink_copy(..., link); In support of usercopy hardening, this patch defines a region in the befs_inode_cache slab cache in which userspace copy operations are allowed. This region is known as the slab cache's usercopy region. Slab caches can now check that each dynamically sized copy operation involving cache-managed memory falls entirely within the slab's usercopy region. This patch is modified from Brad Spengler/PaX Team's PAX_USERCOPY whitelisting code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Signed-off-by: David Windsor <dave@nullcore.net> [kees: adjust commit log, provide usage trace] Cc: Luis de Bethencourt <luisbg@kernel.org> Cc: Salah Triki <salah.triki@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Luis de Bethencourt <luisbg@kernel.org>
2017-11-28Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds2-3/+3
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman9-0/+9
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells1-1/+1
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-15Merge branch 'work.mount' of ↵Linus Torvalds1-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
2017-07-11befs: Implement show_optionsDavid Howells1-3/+21
Implement the show_options superblock op for befs as part of a bid to get rid of s_options and generic_show_options() to make it easier to implement a context-based mount where the mount options can be passed individually over a file descriptor. Signed-off-by: David Howells <dhowells@redhat.com> cc: Luis de Bethencourt <luisbg@osg.samsung.com> cc: Salah Triki <salah.triki@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-09befs: add kernel-doc formatting for befs_bt_read_super()Tommy Nguyen1-9/+6
fs/befs/TODO mentions some comments needing conversion to Kernel-Doc formatting. This patch changes the comment describing befs_bt_read_super(). Signed-off-by: Tommy Nguyen <remyabel@gmail.com> Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
2017-05-05befs: make export work with cold dcacheFabian Frederick1-0/+15
based on commit b3b42c0deaa1 ("fs/affs: make export work with cold dcache") This adds get_parent function so that nfs client can still work after cache drop (Tested on NFS v4 with echo 3 > /proc/sys/vm/drop_caches) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-22befs: add NFS export supportLuis de Bethencourt1-0/+38
Implement mandatory export_operations, so it is possible to export befs via nfs. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: remove trailing whitespacesLuis de Bethencourt7-48/+47
Removing all trailing whitespaces in befs. I was skeptic about tainting the history with this, but whitespace changes can be ignored by using 'git blame -w' and 'git log -w'. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: remove signatures from commentsLuis de Bethencourt3-7/+1
No idea why some comments have signatures. These predate git. Removing them since they add noise and no information. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: fix style issues in header filesLuis de Bethencourt6-17/+12
Fixing checkpatch.pl issues in befs header files: WARNING: Missing a blank line after declarations + befs_inode_addr iaddr; + iaddr.allocation_group = blockno >> BEFS_SB(sb)->ag_shift; WARNING: space prohibited between function name and open parenthesis '(' + return BEFS_SB(sb)->block_size / sizeof (befs_disk_inode_addr); ERROR: "foo * bar" should be "foo *bar" + const char *key, befs_off_t * value); ERROR: Macros with complex values should be enclosed in parentheses +#define PACKED __attribute__ ((__packed__)) Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: fix style issues in linuxvfs.cLuis de Bethencourt1-23/+26
Fix the following type of checkpatch.pl issues: WARNING: line over 80 characters +static struct dentry *befs_lookup(struct inode *, struct dentry *, unsigned int); ERROR: code indent should use tabs where possible + if (!bi)$ WARNING: please, no spaces at the start of a line + if (!bi)$ WARNING: labels should not be indented + unacquire_bh: WARNING: space prohibited between function name and open parenthesis '(' + sizeof (struct befs_inode_info), WARNING: braces {} are not necessary for single statement blocks + if (!*out) { + return -ENOMEM; + } WARNING: Block comments use a trailing */ on a separate line + * in special cases */ WARNING: Missing a blank line after declarations + int token; + if (!*p) ERROR: do not use assignment in if condition + if (!(bh = sb_bread(sb, sb_block))) { ERROR: space prohibited after that open parenthesis '(' + if( befs_sb->num_blocks > ~((sector_t)0) ) { ERROR: space prohibited before that close parenthesis ')' + if( befs_sb->num_blocks > ~((sector_t)0) ) { ERROR: space required before the open parenthesis '(' + if( befs_sb->num_blocks > ~((sector_t)0) ) { Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: fix typos in linuxvfs.cLuis de Bethencourt1-8/+6
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: fix style issues in io.cLuis de Bethencourt1-2/+2
Fixing the two following checkpatch.pl issues: ERROR: trailing whitespace + * Based on portions of file.c and inode.c $ WARNING: labels should not be indented + error: Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: fix style issues in inode.cLuis de Bethencourt1-6/+6
Fixing the following checkpatch.pl errors and warning: ERROR: trailing whitespace + * $ WARNING: Block comments use * on subsequent lines +/* + Validates the correctness of the befs inode ERROR: "foo * bar" should be "foo *bar" +befs_check_inode(struct super_block *sb, befs_inode * raw_inode, Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-12-22befs: fix style issues in debug.cLuis de Bethencourt1-6/+8
Fix all checkpatch.pl errors and warnings in debug.c: ERROR: trailing whitespace + * $ WARNING: Missing a blank line after declarations + va_list args; + va_start(args, fmt); ERROR: "foo * bar" should be "foo *bar" +befs_dump_inode(const struct super_block *sb, befs_inode * inode) ERROR: "foo * bar" should be "foo *bar" +befs_dump_super_block(const struct super_block *sb, befs_super_block * sup) ERROR: "foo * bar" should be "foo *bar" +befs_dump_small_data(const struct super_block *sb, befs_small_data * sd) WARNING: line over 80 characters +befs_dump_index_entry(const struct super_block *sb, befs_disk_btree_super * super) ERROR: "foo * bar" should be "foo *bar" +befs_dump_index_entry(const struct super_block *sb, befs_disk_btree_super * super) ERROR: "foo * bar" should be "foo *bar" +befs_dump_index_node(const struct super_block *sb, befs_btree_nodehead * node) Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-10-15Merge tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befsLinus Torvalds8-283/+244
Pull befs fixes from Luis de Bethencourt: "I recently took maintainership of the befs file system [0]. This is the first time I send you a git pull request, so please let me know if all the below is OK. Salah Triki and myself have been cleaning the code and fixing a few small bugs. Sorry I couldn't send this sooner in the merge window, I was waiting to have my GPG key signed by kernel members at ELCE in Berlin a few days ago." [0] https://lkml.org/lkml/2016/7/27/502 * tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits) befs: befs: fix style issues in datastream.c befs: improve documentation in datastream.c befs: fix typos in datastream.c befs: fix typos in btree.c befs: fix style issues in super.c befs: fix comment style befs: add check for ag_shift in superblock befs: dump inode_size superblock information befs: remove unnecessary initialization befs: fix typo in befs_sb_info befs: add flags field to validate superblock state befs: fix typo in befs_find_key befs: remove unused BEFS_BT_PARMATCH fs: befs: remove ret variable fs: befs: remove in vain variable assignment fs: befs: remove unnecessary *befs_sb variable fs: befs: remove useless initialization to zero fs: befs: remove in vain variable assignment fs: befs: Insert NULL inode to dentry fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect ...
2016-10-08befs: befs: fix style issues in datastream.cLuis de Bethencourt1-15/+17
Fixing the following checkpatch.pl errors: ERROR: "foo * bar" should be "foo *bar" + befs_blocknr_t blockno, befs_block_run * run); WARNING: Missing a blank line after declarations + struct buffer_head *bh; + befs_debug(sb, "---> %s length: %llu", __func__, len); WARNING: Block comments use * on subsequent lines + /* + Double indir block, plus all the indirect blocks it maps. (and other instances of these) Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: improve documentation in datastream.cLuis de Bethencourt1-95/+98
Convert function descriptions to kernel-doc style. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: fix typos in datastream.cLuis de Bethencourt1-4/+4
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: fix typos in btree.cLuis de Bethencourt1-4/+3
Fixing typos in kernel-doc function descriptions in fs/befs/btree.c. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: fix style issues in super.cLuis de Bethencourt1-7/+8
Fixing the following checkpatch.pl error: ERROR: "foo * bar" should be "foo *bar" +befs_load_sb(struct super_block *sb, befs_super_block * disk_sb) And the following warnings: WARNING: suspect code indent for conditional statements (8, 12) + if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_LE) + befs_sb->byte_order = BEFS_BYTESEX_LE; WARNING: suspect code indent for conditional statements (8, 12) + else if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_BE) + befs_sb->byte_order = BEFS_BYTESEX_BE; WARNING: break quoted strings at a space character + befs_error(sb, "blocksize(%u) cannot be larger" + "than system pagesize(%lu)", befs_sb->block_size, WARNING: line over 80 characters + if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) { Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: fix comment styleLuis de Bethencourt1-7/+3
The description of befs_load_sb was confusing the kernel-doc system since, because it starts with /**, it thinks it will document the function with kernel-doc formatting. Which it isn't. Fix other comment style issues in the file while we are at it. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: add check for ag_shift in superblockLuis de Bethencourt1-0/+7
ag_shift and blocks_per_ag contain the same information in different ways, same as block_shift and block_size do. It is worth checking this two are consistent, but since blocks_per_ag isn't documented as mandatory to use some implementations of befs don't enforce this, so making it non-fatal if they don't match and just having it as a warning. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: dump inode_size superblock informationLuis de Bethencourt1-0/+1
befs_dump_super_block() wasn't giving the inode_size information when dumping all elements of the superblock. Add this element to have complete information of the superblock. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: remove unnecessary initializationSalah Triki1-1/+1
There is no need to init block, since it will be overwitten later by iaddr2blockno(). Signed-off-by: Salah Triki <salah.triki@gmail.com> Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-10-08befs: fix typo in befs_sb_infoSalah Triki1-1/+1
Fixing jornal to Journal. Signed-off-by: Salah Triki <salah.triki@gmail.com> Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-10-08befs: add flags field to validate superblock stateSalah Triki2-1/+6
For validating superblock state, add flags field to befs_sb_info, read the state from the disk and check if it is equal to BEFS_DIRTY. Signed-off-by: Salah Triki <salah.triki@gmail.com> Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2016-10-08befs: fix typo in befs_find_keyLuis de Bethencourt1-1/+1
Fixing skeep to skip. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>
2016-10-08befs: remove unused BEFS_BT_PARMATCHLuis de Bethencourt2-19/+16
befs_btree_find(), the only caller of befs_find_key(), only cares about if the return from that function is BEFS_BT_MATCH or not. It never uses the partial match given with BEFS_BT_PARMATCH. Make the overflow return clearer by having BEFS_BT_OVERFLOW instead of BEFS_BT_PARMATCH. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Salah Triki <salah.triki@gmail.com>