| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We disable offloading checksum to workqueues and do it synchronously when
the checksum algorithm is fast. However, as reported in the link below,
RAID0 with multiple devices may suffer from the sync checksum, because
"fast checksum" is still not fast enough to catch up with RAID0 writing.
We don't have an effective way to determine whether to offload or not,
for now add a sysfs knob so this can be debugged. This is intentionally
under CONFIG_BTRFS_DEBUG so ti's not exposed to users as it may be
removed in the future agin.
Introduce fs_devices->offload_csum_mode, so that a btrfs developer can
change the behavior by writing to /sys/fs/btrfs/<uuid>/offload_csum. The
default is "auto" which is the same as the previous behavior. Or, you
can set "on" or "off" (or "y" or "n" whatever kstrtobool() accepts) to
always/never offload checksum.
More benchmark need to be collected with this knob to implement a proper
criteria to enable/disable checksum offloading.
Link: https://lore.kernel.org/linux-btrfs/20230731152223.4EFB.409509F4@e16-tech.com/
Link: https://lore.kernel.org/linux-btrfs/p3vo3g7pqn664mhmdhlotu5dzcna6vjtcoc2hb2lsgo2fwct7k@xzaxclba5tae/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With help of neovim, LSP and clangd we can identify header files that
are not actually needed to be included in the .c files. This is focused
only on removal (with minor fixups), further cleanups are possible but
will require doing the header files properly with forward declarations,
minimized includes and include-what-you-use care.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the duplicate physical recording of the original write physical
address in case of a single device write.
This duplicated code is most likely present due to a rebase error.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Test case btrfs/124 failed if larger metadata folio is enabled, the
dying message looks like this:
BTRFS error (device dm-2): bad tree block start, mirror 2 want 31686656 have 0
BTRFS info (device dm-2): read error corrected: ino 0 off 31686656 (dev /dev/mapper/test-scratch2 sector 20928)
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 6 PID: 350881 Comm: btrfs Tainted: G OE 6.7.0-rc3-custom+ #128
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
RIP: 0010:btrfs_read_extent_buffer+0x106/0x180 [btrfs]
PKRU: 55555554
Call Trace:
<TASK>
read_tree_block+0x33/0xb0 [btrfs]
read_block_for_search+0x23e/0x340 [btrfs]
btrfs_search_slot+0x2f9/0xe60 [btrfs]
btrfs_lookup_csum+0x75/0x160 [btrfs]
btrfs_lookup_bio_sums+0x21a/0x560 [btrfs]
btrfs_submit_chunk+0x152/0x680 [btrfs]
btrfs_submit_bio+0x1c/0x50 [btrfs]
submit_one_bio+0x40/0x80 [btrfs]
submit_extent_page+0x158/0x390 [btrfs]
btrfs_do_readpage+0x330/0x740 [btrfs]
extent_readahead+0x38d/0x6c0 [btrfs]
read_pages+0x94/0x2c0
page_cache_ra_unbounded+0x12d/0x190
relocate_file_extent_cluster+0x7c1/0x9d0 [btrfs]
relocate_block_group+0x2d3/0x560 [btrfs]
btrfs_relocate_block_group+0x2c7/0x4b0 [btrfs]
btrfs_relocate_chunk+0x4c/0x1a0 [btrfs]
btrfs_balance+0x925/0x13c0 [btrfs]
btrfs_ioctl+0x19f1/0x25d0 [btrfs]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
[CAUSE]
The dying line is at btrfs_repair_io_failure() call inside
btrfs_repair_eb_io_failure().
The function is still relying on the extent buffer using page sized
folios.
When the extent buffer is using larger folio, we go into the 2nd slot of
folios[], and triggered the NULL pointer dereference.
[FIX]
Migrate btrfs_repair_io_failure() to folio interfaces.
So that when we hit a larger folio, we just submit the whole folio in
one go.
This also affects data repair path through btrfs_end_repair_bio(),
thankfully data is still fully page based, we can just add an
ASSERT(), and use page_folio() to convert the page to folio.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are two callbacks defined in btrfs_work but only two actually make
use of them, otherwise there are NULLs. We can get rid of the freeing
callback making it a special case of the normal work. This reduces the
size of btrfs_work by 8 bytes, final layout:
struct btrfs_work {
btrfs_func_t func; /* 0 8 */
btrfs_ordered_func_t ordered_func; /* 8 8 */
struct work_struct normal_work; /* 16 32 */
struct list_head ordered_list; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct btrfs_workqueue * wq; /* 64 8 */
long unsigned int flags; /* 72 8 */
/* size: 80, cachelines: 2, members: 6 */
/* last cacheline: 16 bytes */
};
This in turn reduces size of other structures (on a release config):
- async_chunk 160 -> 152
- async_submit_bio 152 -> 144
- btrfs_async_delayed_work 104 -> 96
- btrfs_caching_control 176 -> 168
- btrfs_delalloc_work 144 -> 136
- btrfs_fs_info 3608 -> 3600
- btrfs_ordered_extent 440 -> 424
- btrfs_writepage_fixup 104 -> 96
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A filesystem that uses the raid stripe tree for logical to physical
address translation can't use the regular scrub path, that reads all
stripes and then checks if a sector is unused afterwards.
When using the raid stripe tree, this will result in lookup errors, as
the stripe tree doesn't know the requested logical addresses.
In case we're scrubbing a filesystem which uses the RAID stripe tree for
multi-device logical to physical address translation, perform an extra
block mapping step to get the real on-disk stripe length from the stripe
tree when scrubbing the sectors.
This prevents a double completion of the btrfs_bio caused by splitting the
underlying bio and ultimately a use-after-free.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add support for inserting stripe extents into the raid stripe tree on
completion of every write that needs an extra logical-to-physical
translation when using RAID.
Inserting the stripe extents happens after the data I/O has completed,
this is done to
a) support zone-append and
b) rule out the possibility of a RAID-write-hole.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parameter @need_raid_map is mostly a legacy from the old days where
we don't yet have a solid definition on the @mirror_num, and only
check-integrity was using that parameter, while all other call sites
just pass 1 for that parameter.
Now since we have removed check-integrity functionality, we can also
remove the @need_raid_map parameter.
This change will also remove the ability to read P/Q stripe directly
when passing 0 as @need_raid_map.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfsic_mount() is part of the deprecated check-integrity
functionality.
Now let's remove the main entry point of check-integrity, and thankfully
most of the check-integrity code is self-contained inside
check-integrity.c, we can safely remove the function without huge
changes to btrfs code base.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfsic_check_bio() is part of the deprecated
check-integrity functionality.
Now let's remove the main entry point of check-integrity, and thankfully
most of the check-integrity code is self-contained inside
check-integrity.c, we can safely remove the function without huge
changes to btrfs code base.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a pointer to the ordered_extent to the existing union in struct
btrfs_bio, so all code dealing with data write bios can just use a
pointer dereference to retrieve the ordered_extent instead of doing
multiple rbtree lookups per I/O.
The reference to this ordered_extent is dropped at end I/O time,
which implies that an extra one must be acquired when the bio is split.
This also requires moving the btrfs_extract_ordered_extent call into
btrfs_split_bio so that the invariant of always having a valid
ordered_extent reference for the btrfs_bio is kept.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a helper to check for that a btrfs_bio has a valid inode, and that
it is a data inode to key off all the special handling for data path
checksumming. Note that this uses is_data_inode instead of REQ_META as
REQ_META is only set directly before submission in submit_one_bio and
we'll also want to use this helper for error handling where REQ_META
isn't set yet.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently buffered writeback bios are allowed to span multiple
ordered_extents, although that basically never actually happens since
commit 4a445b7b6178 ("btrfs: don't merge pages into bio if their page
offset is not contiguous").
Supporting bios than span ordered_extents complicates the file
checksumming code, and prevents us from adding an ordered_extent pointer
to the btrfs_bio structure. Use the existing code to limit a bio to
single ordered_extent for zoned device writes for all writes.
This allows to remove the REQ_BTRFS_ONE_ORDERED flags, and the
handling of multiple ordered_extents in btrfs_csum_one_bio.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If a bio gets split, it needs to have a proper file_offset for checksum
validation and repair to work properly.
Based on feedback from Josef, commit 852eee62d31a ("btrfs: allow
btrfs_submit_bio to split bios") skipped this adjustment for ONE_ORDERED
bios. But if we actually ever need to split a ONE_ORDERED read bio, this
will lead to a wrong file offset in the repair code. Right now the only
user of the file_offset is logging of an error message so this is mostly
harmless, but the wrong offset might be more problematic for additional
users in the future.
Fixes: 852eee62d31a ("btrfs: allow btrfs_submit_bio to split bios")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that the old btrfs_map_block is gone, drop the leading underscores
from __btrfs_map_block.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs zoned completion code currently needs an ordered_extent and
extent_map per bio so that it can account for the non-predictable
write location from Zone Append. To archive that it currently splits
the ordered_extent and extent_map at I/O submission time, and then
records the actual physical address in the ->physical field of the
ordered_extent.
This patch instead switches to record the "original" physical address
that the btrfs allocator assigned in spare space in the btrfs_bio,
and then rewrites the logical address in the btrfs_ordered_sum
structure at I/O completion time. This allows the ordered extent
completion handler to simply walk the list of ordered csums and
split the ordered extent as needed. This removes an extra ordered
extent and extent_map lookup and manipulation during the I/O
submission path, and instead batches it in the I/O completion path
where we need to touch these anyway.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_submit_dev_bio is also called for clone bios that aren't embedded
into a btrfs_bio structure, but previous commit "btrfs: optimize the
logical to physical mapping for zoned writes" added code to assign
btrfs_bio.orig_physical in it.
This is harmless right now as only the single data profile can be used
on zoned devices, but will blow up when the RAID stripe tree is added.
Move it out into the single I/O specific branch in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The current code to store the final logical to physical mapping for a
zone append write in the extent tree is rather inefficient. It first has
to split the ordered extent so that there is one ordered extent per bio,
so that it can look up the ordered extent on I/O completion in
btrfs_record_physical_zoned and store the physical LBA returned by the
block driver in the ordered extent.
btrfs_rewrite_logical_zoned then has to do a lookup in the chunk tree to
see what physical address the logical address for this bio / ordered
extent is mapped to, and then rewrite it in the extent tree.
To optimize this process, we can store the physical address assigned in
the chunk tree to the original logical address and a pointer to
btrfs_ordered_sum structure the in the btrfs_bio structure, and then use
this information to rewrite the logical address in the btrfs_ordered_sum
structure directly at I/O completion time in btrfs_record_physical_zoned.
btrfs_rewrite_logical_zoned then simply updates the logical address in
the extent tree and the ordered_extent itself.
The code in btrfs_rewrite_logical_zoned now runs for all data I/O
completions in zoned file systems, which is fine as there is no remapping
to do for non-append writes to conventional zones or for relocation, and
the overhead for quickly breaking out of the loop is very low.
Because zoned file systems now need the ordered_sums structure to
record the actual write location returned by zone append, allocate dummy
structures without the csum array for them when the I/O doesn't use
checksums, and free them when completing the ordered_extent.
Note that the btrfs_bio doesn't grow as the new field are places into
a union that is so far not used for data writes and has plenty of space
left in it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When a zoned append command fails there is no written address reported,
so don't try to record it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that btrfs_wq_submit_bio is never called for synchronous I/O,
the hipri_workers workqueue is not used anymore and can be removed.
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The writeback_control structure already passes down the information about
a writeback being synchronous from the core VM code, and thus information
is propagated into the bio REQ_SYNC flag through the wbc_to_write_flags
helper.
Use that information to decide if checksums calculation is offloaded to
a workqueue instead of btrfs_inode::sync_writers field that not only
bloats the inode but also has too wide scope, being inode wide instead
of limited to the actual writeback request.
The sync writes were set in:
- btrfs_do_write_iter - regular IO, sync status is set
- start_ordered_ops - ordered write start, writeback with WB_SYNC_ALL
mode
- btrfs_write_marked_extents - write marked extents, writeback with
WB_SYNC_ALL mode
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Most modern hardware supports very fast accelerated crc32c calculation.
If that is supported the CPU overhead of the checksum calculation is
very limited, and offloading the calculation to special worker threads
has a lot of overhead for no gain.
E.g. on an Intel Optane device is actually very much slows down even
1M buffered writes with fio:
Unpatched:
write: IOPS=3316, BW=3316MiB/s (3477MB/s)(200GiB/61757msec); 0 zone resets
With synchronous CRCs:
write: IOPS=4882, BW=4882MiB/s (5119MB/s)(200GiB/41948msec); 0 zone resets
With a lot of variation during the unpatched run going down as low as
1100MB/s, while the synchronous CRC version has about the same peak write
speed but much lower dips, and fewer kworkers churning around.
Both tests had fio saturated at 100% CPU.
(thanks to Jens Axboe via Chris Mason for the benchmarking)
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Using SECTOR_SHIFT to convert LBA to physical address makes it more
readable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
After commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror()
to scrub_stripe infrastructure"), scrub no longer works for zoned device
at all.
Even an empty zoned btrfs cannot be replaced:
# mkfs.btrfs -f /dev/nvme0n1
# mount /dev/nvme0n1 /mnt/btrfs
# btrfs replace start -Bf 1 /dev/nvme0n2 /mnt/btrfs
Resetting device zones /dev/nvme1n1 (160 zones) ...
ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs/": Input/output error
And we can hit kernel crash related to that:
BTRFS info (device nvme1n1): host-managed zoned block device /dev/nvme3n1, 160 zones of 134217728 bytes
BTRFS info (device nvme1n1): dev_replace from /dev/nvme2n1 (devid 2) to /dev/nvme3n1 started
nvme3n1: Zone Management Append(0x7d) @ LBA 65536, 4 blocks, Zone Is Full (sct 0x1 / sc 0xb9) DNR
I/O error, dev nvme3n1, sector 786432 op 0xd:(ZONE_APPEND) flags 0x4000 phys_seg 3 prio class 2
BTRFS error (device nvme1n1): bdev /dev/nvme3n1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
BUG: kernel NULL pointer dereference, address: 00000000000000a8
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40
Call Trace:
<IRQ>
btrfs_lookup_ordered_extent+0x31/0x190
btrfs_record_physical_zoned+0x18/0x40
btrfs_simple_end_io+0xaf/0xc0
blk_update_request+0x153/0x4c0
blk_mq_end_request+0x15/0xd0
nvme_poll_cq+0x1d3/0x360
nvme_irq+0x39/0x80
__handle_irq_event_percpu+0x3b/0x190
handle_irq_event+0x2f/0x70
handle_edge_irq+0x7c/0x210
__common_interrupt+0x34/0xa0
common_interrupt+0x7d/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
[CAUSE]
Dev-replace reuses scrub code to iterate all extents and write the
existing content back to the new device.
And for zoned devices, we call fill_writer_pointer_gap() to make sure
all the writes into the zoned device is sequential, even if there may be
some gaps between the writes.
However we have several different bugs all related to zoned dev-replace:
- We are using ZONE_APPEND operation for metadata style write back
For zoned devices, btrfs has two ways to write data:
* ZONE_APPEND for data
This allows higher queue depth, but will not be able to know where
the write would land.
Thus needs to grab the real on-disk physical location in it's endio.
* WRITE for metadata
This requires single queue depth (new writes can only be submitted
after previous one finished), and all writes must be sequential.
For scrub, we go single queue depth, but still goes with ZONE_APPEND,
which requires btrfs_bio::inode being populated.
This is the cause of that crash.
- No correct tracing of write_pointer
After a write finished, we should forward sctx->write_pointer, or
fill_writer_pointer_gap() would not work properly and cause more
than necessary zero out, and fill the whole zone prematurely.
- Incorrect physical bytenr passed to fill_writer_pointer_gap()
In scrub_write_sectors(), one call site passes logical address, which
is completely wrong.
The other call site passes physical address of current sector, but
we should pass the physical address of the btrfs_bio we're submitting.
This is the cause of the -EIO errors.
[FIX]
- Do not use ZONE_APPEND for btrfs_submit_repair_write().
- Manually forward sctx->write_pointer after successful writeback
- Use the physical address of the to-be-submitted btrfs_bio for
fill_writer_pointer_gap()
Now zoned device replace would work as expected.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When I implemented the storage layer bio splitting, I was under the
assumption that we'll never split metadata bios. But Qu reminded me that
this can actually happen with very old file systems with unaligned
metadata chunks and RAID0.
I still haven't seen such a case in practice, but we better handled this
case, especially as it is fairly easily to do not calling the ->end_іo
method directly in btrfs_end_io_work, and using the proper
btrfs_orig_bbio_end_io helper instead.
In addition to the old file system with unaligned metadata chunks case
documented in the commit log, the combination of the new scrub code
with Johannes pending raid-stripe-tree also triggers this case. We
spent some time debugging it and found that this patch solves
the problem.
Fixes: 103c19723c80 ("btrfs: split the bio submission path into a separate file")
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Both scrub and read-repair are utilizing a special repair writes that:
- Only writes back to a single device
Even for read-repair on RAID56, we only update the corrupted data
stripe itself, not triggering the full RMW path.
- Requires a valid @mirror_num
For RAID56 case, only @mirror_num == 1 is valid.
For non-RAID56 cases, we need @mirror_num to locate our stripe.
- No data csum generation needed
These two call sites still have some differences though:
- Read-repair goes plain bio
It doesn't need a full btrfs_bio, and goes submit_bio_wait().
- New scrub repair would go btrfs_bio
To simplify both read and write path.
So here this patch would:
- Introduce a common helper, btrfs_map_repair_block()
Due to the single device nature, we can use an on-stack
btrfs_io_stripe to pass device and its physical bytenr.
- Introduce a new interface, btrfs_submit_repair_bio(), for later scrub
code
This is for the incoming scrub code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we're doing a lot of work for btrfs_bio:
- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios
However for the incoming scrub patches, we don't want this extra
functionality at all, just plain logical + mirror -> physical mapping
ability.
Thus here we do the following changes:
- Introduce btrfs_bio::fs_info
This is for the new scrub specific btrfs_bio, which would not populate
btrfs_bio::inode.
Thus we need such new member to grab a fs_info
This new member will always be populated.
- Replace @inode argument with @fs_info for btrfs_bio_init() and its
caller
Since @inode is no longer a mandatory member, replace it with
@fs_info, and let involved users populate @inode.
- Skip checksum verification and generation if @bbio->inode is NULL
- Add extra ASSERT()s
To make sure:
* bbio->inode is properly set for involved read repair path
* if @file_offset is set, bbio->inode is also populated
- Grab @fs_info from @bbio directly
We can no longer go @bbio->inode->root->fs_info, as bbio->inode can be
NULL. This involves:
* btrfs_simple_end_io()
* should_async_write()
* btrfs_wq_submit_bio()
* btrfs_use_zone_append()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To prepare for a new caller that already has the ordered_extent
available, change btrfs_extract_ordered_extent to take an argument
for it. Add a wrapper for the bio case that still has to do the
lookup (for now).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs repair bio submission code uses bio_add_page() to add a page
to a newly created bio. bio_add_page() can fail, but the return value is
never checked.
Use __bio_add_page() as adding a single page to a newly created bio is
guaranteed to succeed.
This brings us a step closer to marking bio_add_page() as __must_check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_split_bio expects a btrfs_bio as argument and always allocates one.
Type both the orig_bio argument and the return value as struct btrfs_bio
to improve type safety.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Return the containing struct btrfs_bio instead of the less type safe
struct bio from btrfs_bio_alloc.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_submit_bio expects the bio passed to it to be embedded into a
btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Current btrfs_log_dev_io_error() increases the read error count even if the
erroneous IO is a WRITE request. This is because it forget to use "else
if", and all the error WRITE requests counts as READ error as there is (of
course) no REQ_RAHEAD bit set.
Fixes: c3a62baf21ad ("btrfs: use chained bios when cloning")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
struct btrfs_bio has all the information needed for btrfs_use_append, so
pass that instead of a btrfs_inode and file_offset.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The current btrfs zoned device support is a little cumbersome in the data
I/O path as it requires the callers to not issue I/O larger than the
supported ZONE_APPEND size of the underlying device. This leads to a lot
of extra accounting. Instead change btrfs_submit_bio so that it can take
write bios of arbitrary size and form from the upper layers, and just
split them internally to the ZONE_APPEND queue limits. Then remove all
the upper layer warts catering to limited write sized on zoned devices,
including the extra refcount in the compressed_bio.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_submit_bio can derive it trivially from bbio->inode, so stop
bothering in the callers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that btrfs_submit_bio splits the bio when crossing stripe boundaries,
there is no need for the higher level code to do that manually.
For direct I/O this is really helpful, as btrfs_submit_io can now simply
take the bio allocated by iomap and send it on to btrfs_submit_bio
instead of allocating clones.
For that to work, the bio embedded into struct btrfs_dio_private needs to
become a full btrfs_bio as expected by btrfs_submit_bio.
With this change there is a single work item to offload the entire iomap
bio so the heuristics to skip async processing for bios that were split
isn't needed anymore either.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the I/O submitters have to split bios according to the chunk
stripe boundaries. This leads to extra lookups in the extent trees and
a lot of boilerplate code.
To drop this requirement, split the bio when __btrfs_map_block returns a
mapping that is smaller than the requested size and keep a count of
pending bios in the original btrfs_bio so that the upper level
completion is only invoked when all clones have completed.
Based on a patch from Qu Wenruo.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To allow splitting bios in btrfs_submit_bio, btree_csum_one_bio needs to
be able to handle cloned bios. As btree_csum_one_bio is always called
before handing the bio to the block layer that is trivially done by using
bio_for_each_segment instead of bio_for_each_segment_all. Also switch
the function to take a btrfs_bio and use that to derive the fs_info.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move the code that splits the ordered extents and records the physical
location for them to the storage layer so that the higher level consumers
don't have to care about physical block numbers at all. This will also
allow to eventually remove accounting for the zone append write sizes in
the upper layer with a little bit more block layer work.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of letting the callers of btrfs_submit_bio deal with checksumming
the (meta)data in the bio and making decisions on when to offload the
checksumming to the bio, leave that to btrfs_submit_bio. Do do so the
existing btrfs_submit_bio function is split into an upper and a lower
half, so that the lower half can be offloaded to a workqueue.
Note that this changes the behavior for direct writes to raid56 volumes so
that async checksum offloading is not skipped when more I/O is expected.
This runs counter to the argument explaining why it was done, although I
can't measure any affects of the change. Commits later in this series
will make sure the entire direct writes is offloaded to the workqueue
at once and thus make sure it is sent to the raid56 code from a single
thread.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To prepare for further bio submission changes btrfs_csum_one_bio
should be able to take all it's arguments from the btrfs_bio structure.
It can always use the bbio->inode already, and once the compression code
is updated to set ->file_offset that one can be used unconditionally
as well instead of looking at the page mapping now that btrfs doesn't
allow ordered extents to span discontiguous data ranges.
The only slightly tricky bit is the one_ordered flag set by the
compressed writes. Replace that one with the driver private bio
flag, which gets cleared before the bio is handed off to the block layer
so that we don't get in the way of driver use.
Note: this leaves an argument and a flag to btrfs_wq_submit_bio unused.
But that whole mechanism will be removed in its current form in the
next patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rename iter to saved_iter and move it next to the repair internals
and nothing outside of bio.c should be touching it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The device field is only used by the simple end I/O handler, and for
that it can simply be stored in the bi_private field of the bio,
which is currently used for the fs_info that can be retrieved through
bbio->inode as well.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_bio_free_csum has only one caller left, and that caller is always
for an data inode and doesn't need zeroing of the csum pointer as that
pointer will never be touched again. Just open code the conditional
kfree there.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs handles checksum validation and repair in the end I/O
handler for the btrfs_bio. This leads to a lot of duplicate code
plus issues with varying semantics or bugs, e.g.
- the until recently broken repair for compressed extents
- the fact that encoded reads validate the checksums but do not kick
of read repair
- the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag
This commit revamps the checksum validation and repair code to instead
work below the btrfs_submit_bio interfaces.
In case of a checksum failure (or a plain old I/O error), the repair
is now kicked off before the upper level ->end_io handler is invoked.
Progress of an in-progress repair is tracked by a small structure
that is allocated using a mempool for each original bio with failed
sectors, which holds a reference to the original bio. This new
structure is allocated using a mempool to guarantee forward progress
even under memory pressure. The mempool will be replenished when
the repair completes, just as the mempools backing the bios.
There is one significant behavior change here: If repair fails or
is impossible to start with, the whole bio will be failed to the
upper layer. This is the behavior that all I/O submitters except
for buffered I/O already emulated in their end_io handler. For
buffered I/O this now means that a large readahead request can
fail due to a single bad sector, but as readahead errors are ignored
the following readpage if the sector is actually accessed will
still be able to read. This also matches the I/O failure handling
in other file systems.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of calling btrfs_lookup_bio_sums in every caller of
btrfs_submit_bio that reads data, do the call once in btrfs_submit_bio.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All callers of btrfs_submit_bio that want to validate checksums
currently have to store a copy of the iter in the btrfs_bio. Move
the assignment into common code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
