| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently find_first_extent_bit() returns a 0 if it found a range in the
given io tree and 1 if it didn't find any. There's no need to return any
errors, so make the return value a boolean and invert the logic to make
more sense: return true if it found a range and false if it didn't find
any range.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that all extent state bit helpers effectively take the GFP_NOFS mask
(and GFP_NOWAIT is encoded in the bits) we can remove the parameter.
This reduces stack consumption in many functions and simplifies a lot of
code.
Net effect on module on a release build:
text data bss dec hex filename
1250432 20985 16088 1287505 13a551 pre/btrfs.ko
1247074 20985 16088 1284147 139833 post/btrfs.ko
DELTA: -3358
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The only flags we now pass to set_extent_bit/__clear_extent_bit are
GFP_NOFS and GFP_NOWAIT (a few functions handling mappings). This
requires an extra parameter to be passed everywhere but is almost always
the same.
Encode the GFP_NOWAIT as an artificial extent bit and extract the
real bits and gfp mask in the lowest level helpers. Now the passed
gfp mask is not actually used and can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There quite a few spelling mistakes as found using codespell. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
convert_extent_bit
We will pass in the parent and p pointer into our tree_search function
to avoid doing a second search when inserting a new extent state into
the tree. However because this is conditional upon passing in these
pointers the compiler seems to think these values can be uninitialized
if we're using -Wmaybe-uninitialized. Fix this by initializing these
values.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During lseek, when searching for delalloc in a range that represents a
hole and that range has a length of 1 byte, we end up not doing the actual
delalloc search in the inode's io tree, resulting in not correctly
reporting the offset with data or a hole. This actually only happens when
the start offset is 0 because with any other start offset we round it down
by sector size.
Reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -q 0 1" /mnt/sdc/foo
$ xfs_io -c "seek -d 0" /mnt/sdc/foo
Whence Result
DATA EOF
It should have reported an offset of 0 instead of EOF.
Fix this by updating btrfs_find_delalloc_in_range() and count_range_bits()
to deal with inclusive ranges properly. These functions are already
supposed to work with inclusive end offsets, they just got it wrong in a
couple places due to off-by-one mistakes.
A test case for fstests will be added later.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20221223020509.457113-1-joanbrugueram@gmail.com/
Fixes: b6e833567ea1 ("btrfs: make hole and data seeking a lot more efficient")
CC: stable@vger.kernel.org # 6.1
Tested-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was caught when syncing extent-io-tree.c into btrfs-progs. This
however isn't really a problem, the only way next would be uninitialized
is if we found the range we were looking for, and in this case we don't
care about next. However it's a compile error, so fix it up.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I don't know how this isn't caught when we build this in the kernel, but
while syncing extent-io-tree.c into btrfs-progs I got an error because
parent could potentially be uninitialized when we link in a new node,
specifically when the extent_io_tree is empty. This means we could have
garbage in the parent color. I don't know what the ramifications are of
that, but it's probably not great, so fix this by initializing parent to
NULL. I spot checked all of our other usages in btrfs and we appear to
be doing the correct thing everywhere else.
Fixes: c7e118cf98c7 ("btrfs: open code rbtree search in insert_state")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The comment for count_range_bits() mentions that the search is fast if we
are asking for a range with the EXTENT_DIRTY bit set. However that is no
longer true since we don't use that bit and the optimization for that was
removed in:
commit 71528e9e16c7 ("btrfs: get rid of extent_io_tree::dirty_bytes")
So remove that part of the comment mentioning the no longer existing
optimized case, and, while at it, add proper documentation describing the
purpose, arguments and return value of the function.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
An inode's io_tree can be quite large and there are cases where due to
delalloc it can have thousands of extent state records, which makes the
red black tree have a depth of 10 or more, making the operation of
count_range_bits() slow if we repeatedly call it for a range that starts
where, or after, the previous one we called it for. Such use cases are
when searching for delalloc in a file range that corresponds to a hole or
a prealloc extent, which is done during lseek SEEK_HOLE/DATA and fiemap.
So introduce a cached state parameter to count_range_bits() which we use
to store the last extent state record we visited, and then allow the
caller to pass it again on its next call to count_range_bits(). The next
patches in the series will make fiemap and lseek use the new parameter.
This change is part of a patchset that has the goal to make performance
better for applications that use lseek's SEEK_HOLE and SEEK_DATA modes to
iterate over the extents of a file. Two examples are the cp program from
coreutils 9.0+ and the tar program (when using its --sparse / -S option).
A sample test and results are listed in the changelog of the last patch
in the series:
1/9 btrfs: remove leftover setting of EXTENT_UPTODATE state in an inode's io_tree
2/9 btrfs: add an early exit when searching for delalloc range for lseek/fiemap
3/9 btrfs: skip unnecessary delalloc searches during lseek/fiemap
4/9 btrfs: search for delalloc more efficiently during lseek/fiemap
5/9 btrfs: remove no longer used btrfs_next_extent_map()
6/9 btrfs: allow passing a cached state record to count_range_bits()
7/9 btrfs: update stale comment for count_range_bits()
8/9 btrfs: use cached state when looking for delalloc ranges with fiemap
9/9 btrfs: use cached state when looking for delalloc ranges with lseek
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20221106073028.71F9.409509F4@e16-tech.com/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H5NSVicm7nYBJ7x8fFkDpno8z3PYt5aPU43Bajc1H0h1Q@mail.gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent_io_tree::private_data was meant to be a preparatory work for
the metadata inode rework but that never materialized. Now it's used
only for an inode so it's better to change the appropriate type and
rename it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All callers except one pass NULL, so the parameter can be dropped and
the inode::io_tree initialization can be open coded.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We sometimes have to allocate new extent states when clearing or setting
new bits in an extent io tree. Generally we preallocate this before
taking the tree spin lock, but we can use this preallocated extent state
sometimes and then need to try to do a GFP_ATOMIC allocation under the
lock.
Unfortunately sometimes this fails, and then we hit the BUG_ON() and
bring the box down. This happens roughly 20 times a week in our fleet.
However the vast majority of callers use GFP_NOFS, which means that if
this GFP_ATOMIC allocation fails, we could simply drop the spin lock, go
back and allocate a new extent state with our given gfp mask, and begin
again from where we left off.
For the remaining callers that do not use GFP_NOFS, they are generally
using GFP_NOWAIT, which still allows for some reclaim. So allow these
allocations to attempt to happen outside of the spin lock so we don't
need to rely on GFP_ATOMIC allocations.
This in essence creates an infinite loop for anything that isn't
GFP_NOFS. To address this we may want to migrate to using mempools for
extent states so that we will always have emergency reserves in order to
make our allocations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently if we fail to lock a range we'll return the start of the range
that we failed to lock. We'll then search down to this range and wait
on any extent states in this range.
However we can avoid this search altogether if we simply cache the
extent_state that had the contention. We can pass this into
wait_extent_bit() and start from that extent_state without doing the
search. In the most optimistic case we can avoid all searches, more
likely we'll avoid the initial search and have to perform the search
after we wait on the failed state, or worst case we must search both
times which is what currently happens.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With nowait becoming more pervasive throughout our codebase go ahead and
add a cached_state to try_lock_extent(). This allows us to be faster
about clearing the locked area if we have contention, and then gives us
the same optimization for unlock if we are able to lock the range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In production we hit the following deadlock
task 1 task 2 task 3
------ ------ ------
fiemap(file) falloc(file) fsync(file)
write(0, 1MiB)
btrfs_commit_transaction()
wait_on(!pending_ordered)
lock(512MiB, 1GiB)
start_transaction
wait_on_transaction
lock(0, 1GiB)
wait_extent_bit(512MiB)
task 4
------
finish_ordered_extent(0, 1MiB)
lock(0, 1MiB)
**DEADLOCK**
This occurs because when task 1 does it's lock, it locks everything from
0-512MiB, and then waits for the 512MiB chunk to unlock. task 2 will
never unlock because it's waiting on the transaction commit to happen,
the transaction commit is waiting for the outstanding ordered extents,
and then the ordered extent thread is blocked waiting on the 0-1MiB
range to unlock.
To fix this we have to clear anything we've locked so far, wait for the
extent_state that we contended on, and then try to re-lock the entire
range again.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're only initializing extent_io_tree's with a private data if we're a
normal inode, so we don't need this extra check.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of taking up a whole argument to indicate we're clearing
everything in a range, simply add another EXTENT bit to control this,
and then update all the callers to drop this argument from the
clear_extent_bit variants.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was used as an optimization for count_range_bits(EXTENT_DIRTY),
which was used by the failed record code. However this was removed in
this series by patch "btrfs: convert the io_failure_tree to a plain
rb_tree" which was the last user of this optimization. Remove the
->dirty_bytes as nobody cares anymore.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have two variants of lock/unlock extent, one set that takes a cached
state, another that does not. This is slightly annoying, and generally
speaking there are only a few places where we don't have a cached state.
Simplify this by making lock_extent/unlock_extent the only variant and
make it take a cached state, then convert all the callers appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The only places that set extent_changeset is set_record_extent_bits,
everywhere else sets it to NULL. Drop this argument from
set_extent_bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is only used for internal locking related helpers, everybody else
just passes in NULL. I've changed set_extent_bit to __set_extent_bit
and made it static, removed failed_start from set_extent_bit and have it
call __set_extent_bit with a NULL failed_start, and I've moved some code
down below the now static __set_extent_bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is only used in the case that we are clearing EXTENT_LOCKED, so
infer this value from the bits passed in instead of taking it as an
argument.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is only ever set if we have EXTENT_LOCKED set, so simply push this
into the function itself and remove the function argument.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use rb_next/rb_prev and then get the entry for the adjacent items in
an extent io tree. We have helpers for this, so convert merge_state to
use next_state/prev_state and simplify the code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of doing the rb_entry again once we return from this function,
simply return the actual states themselves, and then clean up the only
user of this helper to handle states instead of nodes.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use this to search for an extent state, or return the nodes we need
to insert a new extent state. This means we have the following pattern
node = tree_search_for_insert();
if (!node) {
/* alloc and insert. */
goto again;
}
state = rb_entry(node, struct extent_state, rb_node);
we don't use the node for anything else. Making
tree_search_for_insert() return the extent_state means we can drop the
rb_node and clean this up by eliminating the rb_entry.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a consistent pattern of
n = tree_search();
if (!n)
goto out;
state = rb_entry(n, struct extent_state, rb_node);
while (state) {
/* do something. */
}
which is a bit redundant. If we make tree_search return the state we
can simply have
state = tree_search();
while (state) {
/* do something. */
}
which cleans up the code quite a bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can simplify a lot of these functions where we have to cycle through
extent_state's by simply using next_state() instead of rb_next(). In
many spots this allows us to do things like
while (state) {
/* whatever */
state = next_state(state);
}
instead of
while (1) {
state = rb_entry(n, struct extent_state, rb_node);
n = rb_next(n);
if (!n)
break;
}
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This existed when we overloaded the tree manipulation functions for both
the extent_io_tree and the extent buffer tree. However the extent
buffers are now stored in a radix tree, so we no longer need this
abstraction. Remove struct tree_entry and use extent_state directly
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've moved everything we can unexport all the temporary
exports, move the random helpers, and mark everything as static again.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We no longer need to export this as all users are in extent-io-tree.c,
remove it from the header and put it into extent-io-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is still huge, but unfortunately I cannot make it smaller without
renaming tree_search() and changing all the callers to use the new name,
then moving those chunks and then changing the name back. This feels
like too much churn for code movement, so I've limited this to only
things that called tree_search(). With this patch all of the
extent_io_tree code is now in extent-io-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These are the last few helpers that do not rely on tree_search() and
who's other helpers are exported and in extent-io-tree.c already. Move
these across now in order to make the core move smaller.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In order to avoid moving all of the related code at once temporarily
export all of the extent state related helpers. Then move these helpers
into extent-io-tree.c. We will clean up the exports and make them
static in followup patches.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A lot of the various internals of extent_io_tree call these two
functions for insert or searching the rb tree for entries, so
temporarily export them and then move them to extent-io-tree.c. We
can't move tree_search() without renaming it, and I don't want to
introduce a bunch of churn just to do that, so move these functions
first and then we can move a few big functions and then the remaining
users of tree_search().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This helper is used by a lot of the core extent_io_tree helpers, so
temporarily export it and move it into extent-io-tree.c in order to make
it straightforward to migrate the helpers in batches.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These are just variants and wrappers around the actual work horses of
the extent state. Extract these out of extent_io.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Start cleaning up extent_io.c by moving the extent state code out of it.
This patch starts with the extent state allocation code and the
extent_io_tree init code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
