| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixup in zoned mode for out-of-order writes of metadata that are no
longer necessary, this used to be tracked in a separate list but now
the old locaion needs to be zeroed out, also add assertions
- fix bulk page allocation retry, this may stall after first failure
for compression read/write
* tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not wait for short bulk allocation
btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling
btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer
|
|
[BUG]
There is a recent report that when memory pressure is high (including
cached pages), btrfs can spend most of its time on memory allocation in
btrfs_alloc_page_array() for compressed read/write.
[CAUSE]
For btrfs_alloc_page_array() we always go alloc_pages_bulk_array(), and
even if the bulk allocation failed (fell back to single page
allocation) we still retry but with extra memalloc_retry_wait().
If the bulk alloc only returned one page a time, we would spend a lot of
time on the retry wait.
The behavior was introduced in commit 395cb57e8560 ("btrfs: wait between
incomplete batch memory allocations").
[FIX]
Although the commit mentioned that other filesystems do the wait, it's
not the case at least nowadays.
All the mainlined filesystems only call memalloc_retry_wait() if they
failed to allocate any page (not only for bulk allocation).
If there is any progress, they won't call memalloc_retry_wait() at all.
For example, xfs_buf_alloc_pages() would only call memalloc_retry_wait()
if there is no allocation progress at all, and the call is not for
metadata readahead.
So I don't believe we should call memalloc_retry_wait() unconditionally
for short allocation.
Call memalloc_retry_wait() if it fails to allocate any page for tree
block allocation (which goes with __GFP_NOFAIL and may not need the
special handling anyway), and reduce the latency for
btrfs_alloc_page_array().
Reported-by: Julian Taylor <julian.taylor@1und1.de>
Tested-by: Julian Taylor <julian.taylor@1und1.de>
Link: https://lore.kernel.org/all/8966c095-cbe7-4d22-9784-a647d1bf27c3@1und1.de/
Fixes: 395cb57e8560 ("btrfs: wait between incomplete batch memory allocations")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add an ASSERT to catch a faulty delayed reference item resulting from
prematurely cleared extent buffer.
Also, add a WARN to detect if we try to dirty a ZEROOUT buffer again, which
is suspicious as its update will be lost.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs clears the content of an extent buffer marked as
EXTENT_BUFFER_ZONED_ZEROOUT before the bio submission. This mechanism is
introduced to prevent a write hole of an extent buffer, which is once
allocated, marked dirty, but turns out unnecessary and cleaned up within
one transaction operation.
Currently, btrfs_clear_buffer_dirty() marks the extent buffer as
EXTENT_BUFFER_ZONED_ZEROOUT, and skips the entry function. If this call
happens while the buffer is under IO (with the WRITEBACK flag set,
without the DIRTY flag), we can add the ZEROOUT flag and clear the
buffer's content just before a bio submission. As a result:
1) it can lead to adding faulty delayed reference item which leads to a
FS corrupted (EUCLEAN) error, and
2) it writes out cleared tree node on disk
The former issue is previously discussed in [1]. The corruption happens
when it runs a delayed reference update. So, on-disk data is safe.
[1] https://lore.kernel.org/linux-btrfs/3f4f2a0ff1a6c818050434288925bdcf3cd719e5.1709124777.git.naohiro.aota@wdc.com/
The latter one can reach on-disk data. But, as that node is already
processed by btrfs_clear_buffer_dirty(), that will be invalidated in the
next transaction commit anyway. So, the chance of hitting the corruption
is relatively small.
Anyway, we should skip flagging ZEROOUT on a non-DIRTY extent buffer, to
keep the content under IO intact.
Fixes: aa6313e6ff2b ("btrfs: zoned: don't clear dirty flag of extent buffer")
CC: stable@vger.kernel.org # 6.8
Link: https://lore.kernel.org/linux-btrfs/oadvdekkturysgfgi4qzuemd57zudeasynswurjxw3ocdfsef6@sjyufeugh63f/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several fixes to qgroups that have been recently identified by test
generic/475:
- fix prealloc reserve leak in subvolume operations
- various other fixes in reservation setup, conversion or cleanup"
* tag 'for-6.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: always clear PERTRANS metadata during commit
btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve
btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans
btrfs: record delayed inode root in transaction
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
btrfs: qgroup: correctly model root qgroup rsv in convert
|
|
It is possible to clear a root's IN_TRANS tag from the radix tree, but
not clear its PERTRANS, if there is some error in between. Eliminate
that possibility by moving the free up to where we clear the tag.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, this call site in btrfs_clear_delalloc_extent() only converts
the reservation. We are marking it not delalloc, so I don't think it
makes sense to keep the rsv around. This is a path where we are not
sure to join a transaction, so it leads to incorrect free-ing during
umount.
Helps with the pass rate of generic/269 and generic/475.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The transaction is only able to free PERTRANS reservations for a root
once that root has been recorded with the TRANS tag on the roots radix
tree. Therefore, until we are sure that this root will get tagged, it
isn't safe to convert. Generally, this is not an issue as *some*
transaction will likely tag the root before long and this reservation
will get freed in that transaction, but technically it could stick
around until unmount and result in a warning about leaked metadata
reservation space.
This path is most exercised by running the generic/269 fstest with
CONFIG_BTRFS_DEBUG.
Fixes: a6496849671a ("btrfs: fix start transaction qgroup rsv double free")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When running delayed inode updates, we do not record the inode's root in
the transaction, but we do allocate PREALLOC and thus converted PERTRANS
space for it. To be sure we free that PERTRANS meta rsv, we must ensure
that we record the root in the transaction.
Fixes: 4f5427ccce5d ("btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Create subvolume, create snapshot and delete subvolume all use
btrfs_subvolume_reserve_metadata() to reserve metadata for the changes
done to the parent subvolume's fs tree, which cannot be mediated in the
normal way via start_transaction. When quota groups (squota or qgroups)
are enabled, this reserves qgroup metadata of type PREALLOC. Once the
operation is associated to a transaction, we convert PREALLOC to
PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing
this lifecycle correctly. They unconditionally converted the PREALLOC to
PERTRANS in a generic cleanup step regardless of errors or whether the
operation was fully associated to a transaction or not. This resulted in
error paths occasionally converting this rsv to PERTRANS without calling
record_root_in_trans successfully, which meant that unless that root got
recorded in the transaction by some other thread, the end of the
transaction would not free that root's PERTRANS, leaking it. Ultimately,
this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount
for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the
following properties:
1. any failure before record_root_in_trans is called successfully
results in freeing the PREALLOC reservation.
2. after record_root_in_trans, we convert to PERTRANS, and now the
transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without
it, generic/269 with squotas enabled at mkfs time would fail in ~5-10
runs on my system. With this patch, it ran successfully 1000 times in a
row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use add_root_meta_rsv and sub_root_meta_rsv to track prealloc and
pertrans reservations for subvolumes when quotas are enabled. The
convert function does not properly increment pertrans after decrementing
prealloc, so the count is not accurate.
Note: we check that the fs is not read-only to mirror the logic in
qgroup_convert_meta, which checks that before adding to the pertrans rsv.
Fixes: 8287475a2055 ("btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix race when reading extent buffer and 'uptodate' status is missed
by one thread (introduced in 6.5)
- do additional validation of devices using major:minor numbers
- zoned mode fixes:
- use zone-aware super block access during scrub
- fix use-after-free during device replace (found by KASAN)
- also delete zones that are 100% unusable to reclaim space
- extent unpinning fixes:
- fix extent map leak after error handling
- print correct range in error message
- error code and message updates
* tag 'for-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race in read_extent_buffer_pages()
btrfs: return accurate error code on open failure in open_fs_devices()
btrfs: zoned: don't skip block groups with 100% zone unusable
btrfs: use btrfs_warn() to log message at btrfs_add_extent_mapping()
btrfs: fix message not properly printing interval when adding extent map
btrfs: fix warning messages not printing interval at unpin_extent_range()
btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache()
btrfs: validate device maj:min during open
btrfs: zoned: fix use-after-free in do_zone_finish()
btrfs: zoned: use zone aware sb location for scrub
|
|
There are reports from tree-checker that detects corrupted nodes,
without any obvious pattern so possibly an overwrite in memory.
After some debugging it turns out there's a race when reading an extent
buffer the uptodate status can be missed.
To prevent concurrent reads for the same extent buffer,
read_extent_buffer_pages() performs these checks:
/* (1) */
if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
return 0;
/* (2) */
if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags))
goto done;
At this point, it seems safe to start the actual read operation. Once
that completes, end_bbio_meta_read() does
/* (3) */
set_extent_buffer_uptodate(eb);
/* (4) */
clear_bit(EXTENT_BUFFER_READING, &eb->bflags);
Normally, this is enough to ensure only one read happens, and all other
callers wait for it to finish before returning. Unfortunately, there is
a racey interleaving:
Thread A | Thread B | Thread C
---------+----------+---------
(1) | |
| (1) |
(2) | |
(3) | |
(4) | |
| (2) |
| | (1)
When this happens, thread B kicks of an unnecessary read. Worse, thread
C will see UPTODATE set and return immediately, while the read from
thread B is still in progress. This race could result in tree-checker
errors like this as the extent buffer is concurrently modified:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
Fix it by testing UPTODATE again after setting the READING bit, and if
it's been set, skip the unnecessary read.
Fixes: d7172f52e993 ("btrfs: use per-buffer locking for extent_buffer reading")
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/f51a6d5d7432455a6a858d51b49ecac183e0bbc9.1706312914.git.wqu@suse.com/
Link: https://lore.kernel.org/linux-btrfs/c7241ea4-fcc6-48d2-98c8-b5ea790d6c89@gmx.com/
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor update of changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.
In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.
Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit f4a9f219411f ("btrfs: do not delete unused block group if it may be
used soon") changed the behaviour of deleting unused block-groups on zoned
filesystems. Starting with this commit, we're using
btrfs_space_info_used() to calculate the number of used bytes in a
space_info. But btrfs_space_info_used() also accounts
btrfs_space_info::bytes_zone_unusable as used bytes.
So if a block group is 100% zone_unusable it is skipped from the deletion
step.
In order not to skip fully zone_unusable block-groups, also check if the
block-group has bytes left that can be used on a zoned filesystem.
Fixes: f4a9f219411f ("btrfs: do not delete unused block group if it may be used soon")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), if we failed to merge the extent map, which
is unexpected and theoretically should never happen, we use WARN_ONCE() to
log a message which is not great because we don't get information about
which filesystem it relates to in case we have multiple btrfs filesystems
mounted. So change this to use btrfs_warn() and surround the error check
with WARN_ON() so we always get a useful stack trace and the condition is
flagged as "unlikely" since it's not expected to ever happen.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), if we are unable to merge the existing
extent map, we print a warning message that suggests interval ranges in
the form "[X, Y)", where the first element is the inclusive start offset
of a range and the second element is the exclusive end offset. However
we end up printing the length of the ranges instead of the exclusive end
offsets. So fix this by printing the range end offsets.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_range() we print warning messages that are supposed to
print an interval in the form "[X, Y)", with the first element being an
inclusive start offset and the second element being the exclusive end
offset of a range. However we end up printing the range's length instead
of the range's exclusive end offset, so fix that to avoid having confusing
and non-sense messages in case we hit one of these unexpected scenarios.
Fixes: 00deaf04df35 ("btrfs: log messages at unpin_extent_range() during unexpected cases")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_cache() if we happen to find an extent map with an
unexpected start offset, we jump to the 'out' label and never release the
reference we added to the extent map through the call to
lookup_extent_mapping(), therefore resulting in a leak. So fix this by
moving the free_extent_map() under the 'out' label.
Fixes: c03c89f821e5 ("btrfs: handle errors returned from unpin_extent_cache()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Boris managed to create a device capable of changing its maj:min without
altering its device path.
Only multi-devices can be scanned. A device that gets scanned and remains
in the btrfs kernel cache might end up with an incorrect maj:min.
Despite the temp-fsid feature patch did not introduce this bug, it could
lead to issues if the above multi-device is converted to a single device
with a stale maj:min. Subsequently, attempting to mount the same device
with the correct maj:min might mistake it for another device with the same
fsid, potentially resulting in wrongly auto-enabling the temp-fsid feature.
To address this, this patch validates the device's maj:min at the time of
device open and updates it if it has changed since the last scan.
CC: stable@vger.kernel.org # 6.7+
Fixes: a5b8a5f9f835 ("btrfs: support cloned-device mount capability")
Reported-by: Boris Burkov <boris@bur.io>
Co-developed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Boris Burkov <boris@bur.io>#
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Shinichiro reported the following use-after-free triggered by the device
replace operation in fstests btrfs/070.
BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0
==================================================================
BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs]
Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007
CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0x200/0x3e0
kasan_report+0xd8/0x110
? do_zone_finish+0x91a/0xb90 [btrfs]
? do_zone_finish+0x91a/0xb90 [btrfs]
do_zone_finish+0x91a/0xb90 [btrfs]
btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs]
? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs]
? btrfs_put_root+0x2d/0x220 [btrfs]
? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs]
cleaner_kthread+0x21e/0x380 [btrfs]
? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
kthread+0x2e3/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 3493983:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_alloc_device+0xb3/0x4e0 [btrfs]
device_list_add.constprop.0+0x993/0x1630 [btrfs]
btrfs_scan_one_device+0x219/0x3d0 [btrfs]
btrfs_control_ioctl+0x26e/0x310 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 3494056:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3f/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x32/0x70
kfree+0x11b/0x320
btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs]
btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs]
btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs]
btrfs_ioctl+0xb27/0x57d0 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
The buggy address belongs to the object at ffff8881543c8000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 96 bytes inside of
freed 1024-byte region [ffff8881543c8000, ffff8881543c8400)
The buggy address belongs to the physical page:
page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8
head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
This UAF happens because we're accessing stale zone information of a
already removed btrfs_device in do_zone_finish().
The sequence of events is as follows:
btrfs_dev_replace_start
btrfs_scrub_dev
btrfs_dev_replace_finishing
btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced
btrfs_rm_dev_replace_free_srcdev
btrfs_free_device <-- device freed
cleaner_kthread
btrfs_delete_unused_bgs
btrfs_zone_finish
do_zone_finish <-- refers the freed device
The reason for this is that we're using a cached pointer to the chunk_map
from the block group, but on device replace this cached pointer can
contain stale device entries.
The staleness comes from the fact, that btrfs_block_group::physical_map is
not a pointer to a btrfs_chunk_map but a memory copy of it.
Also take the fs_info::dev_replace::rwsem to prevent
btrfs_dev_replace_update_device_in_mapping_tree() from changing the device
underneath us again.
Note: btrfs_dev_replace_update_device_in_mapping_tree() is holding
fs_info::mapping_tree_lock, but as this is a spinning read/write lock we
cannot take it as the call to blkdev_zone_mgmt() requires a memory
allocation which may not sleep.
But btrfs_dev_replace_update_device_in_mapping_tree() is always called with
the fs_info::dev_replace::rwsem held in write mode.
Many thanks to Shinichiro for analyzing the bug.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
CC: stable@vger.kernel.org # 6.8
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are reports that since version 6.7 update-grub fails to find the
device of the root on systems without initrd and on a single device.
This looks like the device name changed in the output of
/proc/self/mountinfo:
6.5-rc5 working
18 1 0:16 / / rw,noatime - btrfs /dev/sda8 ...
6.7 not working:
17 1 0:15 / / rw,noatime - btrfs /dev/root ...
and "update-grub" shows this error:
/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?)
This looks like it's related to the device name, but grub-probe
recognizes the "/dev/root" path and tries to find the underlying device.
However there's a special case for some filesystems, for btrfs in
particular.
The generic root device detection heuristic is not done and it all
relies on reading the device infos by a btrfs specific ioctl. This ioctl
returns the device name as it was saved at the time of device scan (in
this case it's /dev/root).
The change in 6.7 for temp_fsid to allow several single device
filesystem to exist with the same fsid (and transparently generate a new
UUID at mount time) was to skip caching/registering such devices.
This also skipped mounted device. One step of scanning is to check if
the device name hasn't changed, and if yes then update the cached value.
This broke the grub-probe as it always read the device /dev/root and
couldn't find it in the system. A temporary workaround is to create a
symlink but this does not survive reboot.
The right fix is to allow updating the device path of a mounted
filesystem even if this is a single device one.
In the fix, check if the device's major:minor number matches with the
cached device. If they do, then we can allow the scan to happen so that
device_list_add() can take care of updating the device path. The file
descriptor remains unchanged.
This does not affect the temp_fsid feature, the UUID of the mounted
filesystem remains the same and the matching is based on device major:minor
which is unique per mounted filesystem.
This covers the path when the device (that exists for all mounted
devices) name changes, updating /dev/root to /dev/sdx. Any other single
device with filesystem and is not mounted is still skipped.
Note that if a system is booted and initial mount is done on the
/dev/root device, this will be the cached name of the device. Only after
the command "btrfs device scan" it will change as it triggers the
rename.
The fix was verified by users whose systems were affected.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218353
Link: https://lore.kernel.org/lkml/CAKLYgeJ1tUuqLcsquwuFqjDXPSJpEiokrWK2gisPKDZLs8Y2TQ@mail.gmail.com/
Fixes: bc27d6f0aa0e ("btrfs: scan but don't register device on single device filesystem")
CC: stable@vger.kernel.org # 6.7+
Tested-by: Alex Romosan <aromosan@gmail.com>
Tested-by: CHECK_1234543212345@protonmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At the moment scrub_supers() doesn't grab the super block's location via
the zoned device aware btrfs_sb_log_location() but via btrfs_sb_offset().
This leads to checksum errors on 'scrub' as we're not accessing the
correct location of the super block.
So use btrfs_sb_log_location() for getting the super blocks location on
scrub.
Reported-by: WA AM <waautomata@gmail.com>
Link: http://lore.kernel.org/linux-btrfs/CANU2Z0EvUzfYxczLgGUiREoMndE9WdQnbaawV5Fv5gNXptPUKw@mail.gmail.com
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly stabilization, refactoring and cleanup changes. There rest are
minor performance optimizations due to caching or lock contention
reduction and a few notable fixes.
Performance improvements:
- minor speedup in logging when repeatedly allocated structure is
preallocated only once, improves latency and decreases lock
contention
- minor throughput increase (+6%), reduced lock contention after
clearing delayed allocation bits, applies to several common
workload types
- skip full quota rescan if a new relation is added in the same
transaction
Fixes:
- zstd fix for inline compressed file in subpage mode, updated
version from the 6.8 time
- proper qgroup inheritance ioctl parameter validation
- more fiemap followup fixes after reduced locking done in 6.8:
- fix race when detecting delalloc ranges
Core changes:
- more debugging code:
- added assertions for a very rare crash in raid56 calculation
- tree-checker dumps page state to give more insights into
possible reference counting issues
- add checksum calculation offloading sysfs knob, for now enabled
under DEBUG only to determine a good heuristic for deciding the
offload or synchronous, depends on various factors (block group
profile, device speed) and is not as clear as initially thought
(checksum type)
- error handling improvements, added assertions
- more page to folio conversion (defrag, truncate), cached size and
shift
- preparation for more fine grained locking of sectors in subpage
mode
- cleanups and refactoring:
- include cleanups, forward declarations
- pointer-to-structure helpers
- redundant argument removals
- removed unused code
- slab cache updates, last use of SLAB_MEM_SPREAD removed"
* tag 'for-6.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations
btrfs: fix race when detecting delalloc ranges during fiemap
btrfs: fix off-by-one chunk length calculation at contains_pending_extent()
btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent
btrfs: qgroup: validate btrfs_qgroup_inherit parameter
btrfs: include device major and minor numbers in the device scan notice
btrfs: mark btrfs_put_caching_control() static
btrfs: remove SLAB_MEM_SPREAD flag use
btrfs: qgroup: always free reserved space for extent records
btrfs: tree-checker: dump the page status if hit something wrong
btrfs: compression: remove dead comments in btrfs_compress_heuristic()
btrfs: subpage: make writer lock utilize bitmap
btrfs: subpage: make reader lock utilize bitmap
btrfs: unexport btrfs_subpage_start_writer() and btrfs_subpage_end_and_test_writer()
btrfs: pass a valid extent map cache pointer to __get_extent_map()
btrfs: merge btrfs_del_delalloc_inode() helpers
btrfs: pass btrfs_device to btrfs_scratch_superblocks()
btrfs: handle transaction commit errors in flush_reservations()
btrfs: use KMEM_CACHE() to create btrfs_free_space cache
btrfs: use KMEM_CACHE() to create delayed ref caches
...
|
|
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
During fiemap we may have to visit multiple leaves of the subvolume's
inode tree, and each time we are freeing and allocating an extent buffer
to use as a clone of each visited leaf. Optimize this by reusing cloned
extent buffers, to avoid the freeing and re-allocation both of the extent
buffer structure itself and more importantly of the pages attached to the
extent buffer.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For fiemap we recently stopped locking the target extent range for the
whole duration of the fiemap call, in order to avoid a deadlock in a
scenario where the fiemap buffer happens to be a memory mapped range of
the same file. This use case is very unlikely to be useful in practice but
it may be triggered by fuzz testing (syzbot, etc).
This however introduced a race that makes us miss delalloc ranges for
file regions that are currently holes, so the caller of fiemap will not
be aware that there's data for some file regions. This can be quite
serious for some use cases - for example in coreutils versions before 9.0,
the cp program used fiemap to detect holes and data in the source file,
copying only regions with data (extents or delalloc) from the source file
to the destination file in order to preserve holes (see the documentation
for its --sparse command line option). This means that if cp was used
with a source file that had delalloc in a hole, the destination file could
end up without that data, which is effectively a data loss issue, if it
happened to hit the race described below.
The race happens like this:
1) Fiemap is called, without the FIEMAP_FLAG_SYNC flag, for a file that
has delalloc in the file range [64M, 65M[, which is currently a hole;
2) Fiemap locks the inode in shared mode, then starts iterating the
inode's subvolume tree searching for file extent items, without having
the whole fiemap target range locked in the inode's io tree - the
change introduced recently by commit b0ad381fa769 ("btrfs: fix
deadlock with fiemap and extent locking"). It only locks ranges in
the io tree when it finds a hole or prealloc extent since that
commit;
3) Note that fiemap clones each leaf before using it, and this is to
avoid deadlocks when locking a file range in the inode's io tree and
the fiemap buffer is memory mapped to some file, because writing
to the page with btrfs_page_mkwrite() will wait on any ordered extent
for the page's range and the ordered extent needs to lock the range
and may need to modify the same leaf, therefore leading to a deadlock
on the leaf;
4) While iterating the file extent items in the cloned leaf before
finding the hole in the range [64M, 65M[, the delalloc in that range
is flushed and its ordered extent completes - meaning the corresponding
file extent item is in the inode's subvolume tree, but not present in
the cloned leaf that fiemap is iterating over;
5) When fiemap finds the hole in the [64M, 65M[ range by seeing the gap in
the cloned leaf (or a file extent item with disk_bytenr == 0 in case
the NO_HOLES feature is not enabled), it will lock that file range in
the inode's io tree and then search for delalloc by checking for the
EXTENT_DELALLOC bit in the io tree for that range and ordered extents
(with btrfs_find_delalloc_in_range()). But it finds nothing since the
delalloc in that range was already flushed and the ordered extent
completed and is gone - as a result fiemap will not report that there's
delalloc or an extent for the range [64M, 65M[, so user space will be
mislead into thinking that there's a hole in that range.
This could actually be sporadically triggered with test case generic/094
from fstests, which reports a missing extent/delalloc range like this:
generic/094 2s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad)
--- tests/generic/094.out 2020-06-10 19:29:03.830519425 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad 2024-02-28 11:00:00.381071525 +0000
@@ -1,3 +1,9 @@
QA output created by 094
fiemap run with sync
fiemap run without sync
+ERROR: couldn't find extent at 7
+map is 'HHDDHPPDPHPH'
+logical: [ 5.. 6] phys: 301517.. 301518 flags: 0x800 tot: 2
+logical: [ 8.. 8] phys: 301520.. 301520 flags: 0x800 tot: 1
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/094.out /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad' to see the entire diff)
So in order to fix this, while still avoiding deadlocks in the case where
the fiemap buffer is memory mapped to the same file, change fiemap to work
like the following:
1) Always lock the whole range in the inode's io tree before starting to
iterate the inode's subvolume tree searching for file extent items,
just like we did before commit b0ad381fa769 ("btrfs: fix deadlock with
fiemap and extent locking");
2) Now instead of writing to the fiemap buffer every time we have an extent
to report, write instead to a temporary buffer (1 page), and when that
buffer becomes full, stop iterating the file extent items, unlock the
range in the io tree, release the search path, submit all the entries
kept in that buffer to the fiemap buffer, and then resume the search
for file extent items after locking again the remainder of the range in
the io tree.
The buffer having a size of a page, allows for 146 entries in a system
with 4K pages. This is a large enough value to have a good performance
by avoiding too many restarts of the search for file extent items.
In other words this preserves the huge performance gains made in the
last two years to fiemap, while avoiding the deadlocks in case the
fiemap buffer is memory mapped to the same file (useless in practice,
but possible and exercised by fuzz testing and syzbot).
Fixes: b0ad381fa769 ("btrfs: fix deadlock with fiemap and extent locking")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At contains_pending_extent() the value of the end offset of a chunk we
found in the device's allocation state io tree is inclusive, so when
we calculate the length we pass to the in_range() macro, we must sum
1 to the expression "physical_end - physical_offset".
In practice the wrong calculation should be harmless as chunks sizes
are never 1 byte and we should never have 1 byte ranges of unallocated
space. Nevertheless fix the wrong calculation.
Reported-by: Alex Lyakas <alex.lyakas@zadara.com>
Link: https://lore.kernel.org/linux-btrfs/CAOcd+r30e-f4R-5x-S7sV22RJPe7+pgwherA6xqN2_qe7o4XTg@mail.gmail.com/
Fixes: 1c11b63eff2a ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
same parent
Currently "btrfs subvolume snapshot -i <qgroupid>" would always mark the
qgroup inconsistent.
This can be annoying if the fs has a lot of snapshots, and needs qgroup
to get the accounting for the amount of bytes it can free for each
snapshot.
Although we have the new simple quote as a solution, there is also a
case where we can skip the full scan, if all the following conditions
are met:
- The source subvolume belongs to a higher level parent qgroup
- The parent qgroup already owns all its bytes exclusively
- The new snapshot is also added to the same parent qgroup
In that case, we only need to add nodesize to the parent qgroup and
avoid a full rescan.
This patch would add the extra quick accounting update for such inherit.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Currently btrfs can create subvolume with an invalid qgroup inherit
without triggering any error:
# mkfs.btrfs -O quota -f $dev
# mount $dev $mnt
# btrfs subvolume create -i 2/0 $mnt/subv1
# btrfs qgroup show -prce --sync $mnt
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 16.00KiB 16.00KiB subv1
[CAUSE]
We only do a very basic size check for btrfs_qgroup_inherit structure,
but never really verify if the values are correct.
Thus in btrfs_qgroup_inherit() function, we have to skip non-existing
qgroups, and never return any error.
[FIX]
Fix the behavior and introduce extra checks:
- Introduce early check for btrfs_qgroup_inherit structure
Not only the size, but also all the qgroup ids would be verified.
And the timing is very early, so we can return error early.
This early check is very important for snapshot creation, as snapshot
is delayed to transaction commit.
- Drop support for btrfs_qgroup_inherit::num_ref_copies and
num_excl_copies
Those two members are used to specify to copy refr/excl numbers from
other qgroups.
This would definitely mark qgroup inconsistent, and btrfs-progs has
dropped the support for them for a long time.
It's time to drop the support for kernel.
- Verify the supported btrfs_qgroup_inherit::flags
Just in case we want to add extra flags for btrfs_qgroup_inherit.
Now above subvolume creation would fail with -ENOENT other than silently
ignore the non-existing qgroup.
CC: stable@vger.kernel.org # 6.7+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To better debug issues surrounding device scans, include the device's
major and minor numbers in the device scan notice for btrfs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_put_caching_control() is only used in block-group.c, so mark it
static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Lijuan Li <lilijuan@iscas.ac.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1, so it became a dead flag since the commit
16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And the
series[1] went on to mark it obsolete to avoid confusion for users.
Here we can just remove all its users, which has no functional change.
[1] https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If qgroup is marked inconsistent (e.g. caused by operations needing full
subtree rescan, like creating a snapshot and assign to a higher level
qgroup), btrfs would immediately start leaking its data reserved space.
The following script can easily reproduce it:
mkfs.btrfs -O quota -f $dev
mount $dev $mnt
btrfs subvolume create $mnt/subv1
btrfs qgroup create 1/0 $mnt
# This snapshot creation would mark qgroup inconsistent,
# as the ownership involves different higher level qgroup, thus
# we have to rescan both source and snapshot, which can be very
# time consuming, thus here btrfs just choose to mark qgroup
# inconsistent, and let users to determine when to do the rescan.
btrfs subv snapshot -i 1/0 $mnt/subv1 $mnt/snap1
# Now this write would lead to qgroup rsv leak.
xfs_io -f -c "pwrite 0 64k" $mnt/file1
# And at unmount time, btrfs would report 64K DATA rsv space leaked.
umount $mnt
And we would have the following dmesg output for the unmount:
BTRFS info (device dm-1): last unmount of filesystem 14a3d84e-f47b-4f72-b053-a8a36eef74d3
BTRFS warning (device dm-1): qgroup 0/5 has unreleased space, type 0 rsv 65536
[CAUSE]
Since commit e15e9f43c7ca ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"),
we introduce a mode for btrfs qgroup to skip the timing consuming
backref walk, if the qgroup is already inconsistent.
But this skip also covered the data reserved freeing, thus the qgroup
reserved space for each newly created data extent would not be freed,
thus cause the leakage.
[FIX]
Make the data extent reserved space freeing mandatory.
The qgroup reserved space handling is way cheaper compared to the
backref walking part, and we always have the super sensitive leak
detector, thus it's definitely worth to always free the qgroup
reserved data space.
Reported-by: Fabian Vogt <fvogt@suse.com>
Fixes: e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting")
CC: stable@vger.kernel.org # 6.1+
Link: https://bugzilla.suse.com/show_bug.cgi?id=1216196
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a bug report about very suspicious tree-checker got triggered:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
SELinux: inode_doinit_use_xattr: getxattr returned 117 for dev=dm-0
ino=5737268
[ANALYZE]
The root cause is still unclear, but there are some clues already:
- Unaligned eb bytenr
The block bytenr is 8550954455682405139, which is not even aligned to
2.
This bytenr is fetched from extent buffer header, not from eb->start.
This means, at the initial time of read, eb header bytenr is still
correct (the very basis check to continue read), but later something
wrong happened, got at least the first page corrupted.
Thus we got such obviously incorrect value.
- Invalid extent buffer header owner
The read itself is triggered for subvolume 256, but the eb header
owner is 11858205567642294356, which is not really possible.
The problem here is, subvolume id is limited to (1 << 48 - 1),
and this one definitely goes beyond that limit.
So this value is another garbage.
We already got two garbage from an extent buffer, which passed the
initial bytenr and csum checks, but later the contents become garbage at
some point.
This looks like a page lifespan problem (e.g. we didn't properly hold the
page).
[ENHANCEMENT]
The current tree-checker only outputs things from the extent buffer,
nothing with the page status.
So this patch would enhance the tree-checker output by also dumping the
first page, which would look like this:
page:00000000aa9f3ce8 refcount:4 mapcount:0 mapping:00000000169aa6b6 index:0x1d0c pfn:0x1022e5
memcg:ffff888103456000
aops:btree_aops [btrfs] ino:1
flags: 0x2ffff0000008000(private|node=0|zone=2|lastcpupid=0xffff)
page_type: 0xffffffff()
raw: 02ffff0000008000 0000000000000000 dead000000000122 ffff88811e06e220
raw: 0000000000001d0c ffff888102fdb1d8 00000004ffffffff ffff888103456000
page dumped because: eb page dump
BTRFS critical (device dm-3): corrupt leaf: root=5 block=30457856 slot=6 ino=257 file_offset=0, invalid disk_bytenr for file extent, have 10617606235235216665, should be aligned to 4096
BTRFS error (device dm-3): read time tree block corruption detected on logical 30457856 mirror 1
From the dump we can see some extra info, something can help us to do
extra cross-checks:
- Page refcount
if it's too low, it definitely means something bad.
- Page aops
Any mapped eb page should have btree_aops with inode number 1.
- Page index
Since a mapped eb page should has its bytenr matching the page
position, (index << PAGE_SHIFT) should match the bytenr of the
bytenr from the critical line.
- Page Private flags
A mapped eb page should have Private flag set to indicate it's managed
by btrfs.
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit a440d48c7f93 ("Btrfs: heuristic: implement sampling
logic"), btrfs_compress_heuristic() is no longer a simple "return true",
but more complex to determine if we should compress.
Thus the comment is dead and can be confusing, just remove it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For the writer counter, it's pretty much the same as the reader counter,
and they are exclusive. So move them to the new locked bitmap.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_subpage utilizes its atomic member @reader to manage the
reader counter. However it is only utilized to prevent the page to be
released/unlocked when we still have reads underway.
In that use case, we don't really allow multiple readers on the same
subpage sector. So here we can introduce a new locked bitmap to
represent exactly which subpage range is locked for read.
In theory we can remove btrfs_subpage::reader as it's just the set bits
of the new locked bitmap. But unfortunately bitmap doesn't provide such
handy API yet, so we still keep the reader counter.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_subpage_end_and_test_writer()
Both functions were introduced in commit 1e1de38792e0 ("btrfs: make
process_one_page() to handle subpage locking"), but they have never
been utilized out of subpage code. So just unexport them.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can pass a valid em cache pointer down to __get_extent_map() and
drop the validity check. This avoids the special case, the call stacks
are simple:
btrfs_read_folio
btrfs_do_readpage
__get_extent_map
extent_readahead
contiguous_readpages
btrfs_do_readpage
__get_extent_map
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The helpers btrfs_del_delalloc_inode() and __btrfs_del_delalloc_inode()
don't follow the pattern when the "__" helper does a special case and
are in fact reversed regarding the naming. We can merge them into one as
there's only one place that needs to be open coded.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Replace the two parameters bdev and name by one that can be used to get
them both.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Other errors in flush_reservations() are handled and also in the caller.
Ignoring commit might make some sense as it's called right after join so
it's to poke the whole commit machinery to free space.
However for consistency return the error. The caller
btrfs_quota_disable() would try to start the transaction which would
in turn fail too so there's no effective change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches when the default values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches related to delayed refs when the default
values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches when the default values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches when the default values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches when the default values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches when the default values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
